{"title":"DTL Tanks","description":"\u003ch1 dir=\"ltr\"\u003e\u003cspan\u003eDTL Tanks\u003c\/span\u003e\u003c\/h1\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eBig clouds and a warm, airy inhale come from direct-to-lung vaping, where you draw the vapour straight into your lungs like a deep breath. DTL tanks, also called sub-ohm tanks, run wide airflow and low-resistance mesh coils to produce the vapour and flavour cloud-chasers are after. This collection covers the sub-ohm tanks that lead the category, from the Geekvape Zeus to the Uwell Valyrian, built for higher-VG e-liquid and plenty of power. \u003cbr\u003e\u003cbr\u003eOrder before 4 pm and Pirate Vapes has your tank packed and gone the same day, so there is little wait between buying and building your setup. Every tank is refillable and sold to over-18s only. Fitment and coil options vary, so check the compatible coils on the product page, and pair the tank with a high-VG shortfill for the best clouds.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","products":[{"product_id":"vaporesso-itank-sub-ohm-tank","title":"Vaporesso iTank Sub Ohm Tank","description":"\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eVaporesso iTank Sub Ohm Tank \u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003ePirate Vapes carries the \u003cstrong\u003eVaporesso iTank Sub Ohm Tank \u003c\/strong\u003efor a reason. It is one of those tanks that does not try to reinvent anything. It just gets the basics right. 2ml capacity,\u003cstrong\u003e GTi mesh coils,\u003c\/strong\u003e a 510 thread that screws onto whatever mod you already have, and a Turbo Airflow System that genuinely changes how smooth the draw feels compared to older sub-ohm tanks. \u003c\/span\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eFill it from the top, press a coil in, set your wattage. The whole thing is stainless steel and Pyrex, built to take daily use without looking rough after a month. \u003cstrong\u003ePirate Vapes\u003c\/strong\u003e ships it age-verified across the UK. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eWhy vapers choose this:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eTurbo Airflow System with three bottom air inlets for smoother, quieter draws and more consistent flavour.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003ePress-fit coil installation. No threading, no cross-threading, no messing about.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eSecure sliding top-fill design that keeps juice where it should be.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eSelf-circulating e-liquid system that recirculates condensation back toward the coil to reduce leakage at the base.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003e510 connection that works with most sub-ohm mods without adapters or compatibility headaches.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eVaporesso iTank Sub Ohm Tank Features\u003c\/span\u003e\u003c\/h2\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eTurbo Airflow System\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThree separate air inlets sit around the base of the tank. Most sub-ohm tanks use one or two. Three spreads the draw more evenly across the mesh strip, and you notice it. Less turbulence, less of that rattly noise some tanks make at high wattage. Tighten the ring for a warmer, more restricted pull. Leave it wide open and you get a proper airy DTL hit. The difference between full open and half-closed is pretty dramatic on this tank.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eGTi Mesh Coil Platform\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eMesh coils heat faster and cover more surface area than traditional round wire. That is not news. What makes the GTi platform worth talking about is the press-fit system. You push the coil into the base and it seats itself. No screwing it in, no worrying about whether the threads have caught properly. Replacement GTi Coils come in packs of five from the\u003c\/span\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/vape-coils\"\u003e \u003c\/a\u003e\u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/vape-coils\" title=\"Vape Coils\" target=\"_blank\"\u003eVape Coils\u003c\/a\u003e\u003c\/strong\u003e\u003cspan\u003e\u003cstrong\u003e \u003c\/strong\u003ecollection at \u003cstrong\u003ePirate Vapes\u003c\/strong\u003e, so keeping spares around is easy.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eSlide-Open Top Fill\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eSlide the top cap open, pour your juice in, slide it back. The silicone seal sits flush so nothing drips between refills. Wide enough for most bottle nozzles. Not much else to say about it, honestly. It works, it seals, it does not pop open in your pocket. That is what you want from a fill system.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eSelf-Circulating E-Liquid System\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eCondensation builds up in every sub-ohm tank. It pools at the base, creeps through the 510 pin, leaves your mod sticky. Vaporesso built a recirculation channel into the iTank that draws that condensation back toward the coil instead of letting it sit there. It does not eliminate condensation entirely, nothing does, but it keeps the base noticeably cleaner than most tanks in this price range.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eAdjustable Bottom Airflow\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe ring at the base has three slots you can open or close. Wide open is full DTL, big clouds, airy draw. Close it down and the vapour gets warmer, denser, more flavour-focused. There is enough range here that you can genuinely dial it in to how you like it rather than just picking between \"open\" and \"slightly less open.\" Pair the tank with a\u003cstrong\u003e \u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/high-vg-e-liquid\"\u003eHigh VG\u003c\/a\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003ca title=\"High VG E-Liquid\" href=\"https:\/\/piratevapes.co.uk\/collections\/high-vg-e-liquid\" target=\"_blank\"\u003e\u003cstrong\u003e E-Liquid\u003c\/strong\u003e\u003c\/a\u003e\u003cspan\u003e\u003cstrong\u003e \u003c\/strong\u003efrom our collection and you will get the most out of it.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eVaporesso iTank Sub Ohm Tank Colour Options\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThis is a\u003cstrong\u003e refillable sub-ohm tank\u003c\/strong\u003e, so there are no flavour variants. You fill it yourself with whatever juice suits you, which honestly is one of the best things about owning a tank instead of a prefilled pod system.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003ePirate Vapes currently stocks the iTank in two finishes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003e#buttons\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\"\u003eRainbow\u003c\/li\u003e\n\u003cli dir=\"ltr\"\u003eAurora Green \u003cspan\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe iTank is manufactured in additional colours including Black, Grey, and Silver, among others. Stock at \u003cstrong\u003ePirate Vapes\u003c\/strong\u003e reflects current UK availability.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eHow to Set Up the Vaporesso iTank Sub Ohm Tank\u003c\/span\u003e\u003c\/h2\u003e\n\u003col\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eUnscrew the base of the tank and press-fit the GTi coil into place. It should seat firmly without any wobble.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eDrop a few drops of e-liquid directly onto the exposed cotton on the coil. This is priming, and skipping it is the fastest way to burn out a fresh coil.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eScrew the base back onto the tank body.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eSlide the top cap open and fill the tank with your chosen juice. Do not overfill past the max line.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eClose the top cap and let the tank sit upright for five to ten minutes. Seriously. The cotton needs time to saturate fully or you will taste it on your first draw.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eScrew the tank onto your 510 mod. Set your wattage to the lower end of the coil's recommended range.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eTake a few gentle draws first and gradually increase the wattage until you find where the flavour sits best for you.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eWhat's in the Vaporesso iTank Sub Ohm Tank Box\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003e\u003cstrong\u003eOne iTank (2ml, TPD-compliant)\u003c\/strong\u003e, one \u003cstrong\u003eGTi 0.2Ω mesh coil (rated 60 to 75W)\u003c\/strong\u003e, one \u003cstrong\u003eGTi 0.4Ω mesh coil (rated 50 to 60W)\u003c\/strong\u003e, one spare glass tube, three replacement O-rings, and a user manual. That is per the manufacturer's listed box contents. No mod, no battery, no e-liquid included. You are getting the tank and coils only.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eBuilt for Any 510 Mod\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe iTank uses a standard 510 threaded connection, so it is compatible with most 510-thread vape mods. No proprietary fittings. If you already own a Vaporesso GEN 200, a GeekVape Aegis, a SMOK Morph, or pretty much any other sub-ohm capable mod, the iTank screws straight on.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eOn the coil side, the tank takes the full \u003cstrong\u003eVaporesso GTi Mesh \u003c\/strong\u003erange. The two in the box handle most preferences, but there is also a\u003cstrong\u003e 0.15Ω\u003c\/strong\u003e option in the GTi lineup for higher wattage vaping at 75 to 90W. You can find\u003cstrong\u003e replacement coils\u003c\/strong\u003e alongside the tank in the\u003c\/span\u003e\u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/vape-tanks\"\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/a\u003e\u003ca title=\"Vape Tanks\" href=\"https:\/\/piratevapes.co.uk\/collections\/vape-tanks\" target=\"_blank\"\u003e\u003cstrong\u003eVape Tanks\u003c\/strong\u003e\u003c\/a\u003e\u003cspan\u003e selection at \u003cstrong\u003ePirate Vapes\u003c\/strong\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eAt 24.5mm diameter, the iTank sits flush on most modern mods without overhang. Worth noting though: this is a DTL tank through and through. If you want a tight, cigarette-style draw, you are better off with a pod kit or an \u003ca title=\"MTL Tank\" href=\"https:\/\/piratevapes.co.uk\/collections\/mtl-tanks\" target=\"_blank\"\u003e\u003cstrong\u003eMTL Tank\u003c\/strong\u003e\u003c\/a\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eAbout Vaporesso\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eVaporesso launched in 2015 out of Shenzhen, China, backed by parent company Smoore. They have been around long enough now that most vapers have used at least one of their products, whether that is an \u003cstrong\u003eXROS pod kit\u003c\/strong\u003e, a Target mod, or one of the GEN series setups. The company holds hundreds of patents and sells in over 60 countries. Where they have carved out their space is coil technology. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe GTi and earlier \u003cstrong\u003eGT coil \u003c\/strong\u003efamilies have built a following among vapers who got tired of coils lasting three days on sweet juice. The iTank sits in the DTL end of their lineup, and it shows what the \u003cstrong\u003eGTi platform \u003c\/strong\u003ecan do when paired with decent airflow engineering.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eStock Up and Save\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eHow long a\u003cstrong\u003e GTi coil \u003c\/strong\u003elasts depends on what juice you run and how high you push the wattage. Sweeter liquids will shorten that window, always do. Keeping a five-pack of replacement coils around means you are never stuck vaping burnt cotton while you wait on a delivery. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003ePirate Vapes stocks only genuine \u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/vaporesso-vapes\" target=\"_blank\" title=\"Vaporesso Products\" rel=\"noopener\"\u003e\u003cstrong\u003eVaporesso Products\u003c\/strong\u003e\u003c\/a\u003e, packed properly and dispatched with tracking across the UK. Every order goes through age-verified checkout, 18+ only, and all stock is TPD-compliant. Whether you are setting up for the first time or just restocking, everything you need is in one place.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eConclusion\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe \u003cstrong\u003eVaporesso iTank Sub Ohm Tank\u003c\/strong\u003e does what a good \u003cstrong\u003e\u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/dtl-tanks\" target=\"_blank\" title=\"DTL Tank\" rel=\"noopener\"\u003eDTL Tank\u003c\/a\u003e \u003c\/strong\u003eshould without overcomplicating things. Consistent flavour, solid clouds, easy fills, and coils that hold up well with regular use. The triple-inlet Turbo Airflow System and self-circulating condensation design deal with two of the biggest annoyances in sub-ohm tanks: uneven flavour and juice pooling at the base. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eIt fits any 510 mod, takes widely available \u003cstrong\u003eGTi coils\u003c\/strong\u003e, and the press-fit installation means you spend less time fiddling with hardware and more time actually vaping. If you want a reliable sub-ohm tank at a reasonable price, the iTank earns its spot. Available now at \u003cstrong\u003ePirate Vapes \u003c\/strong\u003ewith tracked, age-verified UK delivery.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eFAQs\u003c\/span\u003e\u003c\/h2\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eWhat wattage should I use with the Vaporesso iTank?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe 0.4Ω coil runs best between 50 and 60W. The 0.2Ω coil sits between 60 and 75W. Start at the lower end of whichever coil you are using and work your way up until the flavour feels right.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eCan I use other coils in the iTank?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eOnly Vaporesso GTi coils. The older GT Mesh and GTX coils are different platforms and will not fit this tank.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eDoes the iTank leak?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eWhen assembled properly, leaking is minimal. The self-circulating system helps keep the base dry. If you are getting leaks, check your O-rings and make sure the coil is fully seated.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eWhat juice works best?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eHigh VG e-liquids are recommended, ideally 70\/30 or above. This is a sub-ohm tank built for DTL vaping. Thinner liquids may not perform as well in this setup.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eWill the iTank fit my mod?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eIf your mod has a 510 connection and supports sub-ohm coils, it should work. The tank is 24.5mm at the base, which sits flush on most modern box mods.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eHow often should I change the coil?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eIt varies depending on your e-liquid and how much you vape. When flavour starts tasting flat or slightly off, that is your sign to swap in a fresh one.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eIs the iTank the same as the iTank 2?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eNo. The iTank 2 is an updated version with improved leak resistance and a revised airflow design. Both use GTi coils, but they are separate products.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eWhat is the difference between the 0.2Ω and 0.4Ω coil?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe 0.4Ω runs at lower wattage, gives a slightly cooler vape, and tends to be the better option for flavour. The 0.2Ω runs hotter, produces more cloud, and uses more juice and battery power.\u003c\/span\u003e\u003c\/p\u003e","brand":"Vaporesso","offers":[{"title":"Rainbow","offer_id":52534365159706,"sku":null,"price":9.95,"currency_code":"GBP","in_stock":true},{"title":"Aurora Green","offer_id":52534365192474,"sku":null,"price":9.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0995\/5675\/3690\/files\/Vaporesso_iTank_Sub_Ohm_Tank.jpg?v=1784263490"},{"product_id":"geekvape-z-max-sub-ohm-tank","title":"Geekvape Z Max Sub Ohm Replacement Tank","description":"\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eGeekvape Z Max Sub Ohm Replacement Tank\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eTop airflow in, vapour out, nothing leaking from the bottom. That is the short version of what the \u003cstrong\u003eGeekvape Z Max Sub Ohm Replacement Tank \u003c\/strong\u003edoes differently. Where most sub-ohm tanks pull air up through the base and eventually let juice follow it, the Z Max sends air downward from the top, around the coil, and out the drip tip. Paired with \u003cstrong\u003eGeekvape's M Series mesh coils\u003c\/strong\u003e, you get a\u003cstrong\u003e \u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/dtl-tanks\" target=\"_blank\" title=\"DTL Tank\" rel=\"noopener\"\u003eDTL Tank\u003c\/a\u003e\u003c\/strong\u003e that chases clouds properly without turning the base of your mod into a sticky mess. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003e\u003cstrong\u003ePirate Vapes\u003c\/strong\u003e carries the Z Max in all six colours, genuine\u003cstrong\u003e Geekvape\u003c\/strong\u003e, 2ml TPD-compliant, shipped tracked and age-verified across the UK. If you have been burning through sub-ohm tanks that leak, flood, or just stop tasting right after a week, give this one a look. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eWhy vapers choose this:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eTop-to-bottom airflow routes around the coil, helping reduce leakage at the base compared to bottom-airflow tanks.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003ePress-fit coil system. No threading, no screwing. Old coil out, new coil in.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eQuarter-turn top fill with dual ports wide enough for most bottle nozzles. Quick, clean, no mess.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eStandard 510 connection. Works with the vast majority of regulated box mods.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eStainless steel and Pyrex glass that hold up to the kind of daily wear that cracks cheaper tanks.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eGeekvape Z Max Sub Ohm Replacement Tank Features\u003c\/span\u003e\u003c\/h2\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eTop-to-Bottom Airflow That Keeps the Base Dry\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eBottom-airflow tanks leak. Not all of them, not every time, but enough of them often enough that most sub-ohm vapers have a sticky mod story. Condensation collects at the base, pools around the coil housing, eventually finds its way onto your 510 connection. You have probably wiped yours down more times than you can count. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe Z Max avoids most of that by pulling air in from the top instead. Slotted inlets near the cap send air downward around the coil, and it exits through the 810 drip tip. Moisture stays near the top where it evaporates rather than settling at the base where it causes problems. Is it perfectly leakproof in every scenario? No tank is. But the difference is real, and you notice it the first time you pick up your mod after an overnight sit and the base is still clean.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003ePress-Fit Coil Swaps\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThreading a coil into a sub-ohm tank is one of those small annoyances that adds up. Cross-thread it once and you are either fighting to unscrew the thing or dealing with a flooded deck for the rest of the afternoon. The Z Max skips all of that. Push the old coil out from the base, press the fresh one firmly into place. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eSeal forms as the coil seats itself. Replacing a coil takes only a few seconds and you do not need to drain the tank first. If you have ever emptied 2ml of juice into a tissue because your old tank needed a full disassembly to swap coils, you know why this matters. Keep spares on hand from the\u003c\/span\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/vape-coils\"\u003e \u003c\/a\u003e\u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/vape-coils\" target=\"_blank\" title=\"Vape Coils\" rel=\"noopener\"\u003eVape Coils\u003c\/a\u003e\u003c\/strong\u003e\u003cspan\u003e\u003cstrong\u003e \u003c\/strong\u003ecollection.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eM Series Mesh Coils\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eTwo coils in the box. The 0.14 ohm single mesh handles 60 to 80W. The 0.2 ohm triple mesh covers 70 to 85W. Both are physically larger than the Z Series coils from other Zeus tanks, which gives them more mesh surface area and better contact with the cotton. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eWhat does that actually do? More even heating from the first draw to the last, with less of that flavour drop-off you sometimes get near the bottom of the tank on traditional wire builds. Both coils are designed for\u003cstrong\u003e \u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/high-vg-e-liquid\" target=\"_blank\" title=\"High-VG E-Liquids\" rel=\"noopener\"\u003eHigh-VG E-Liquids\u003c\/a\u003e \u003c\/strong\u003ewhen properly primed. M Series only, by the way. \u003cstrong\u003eZ Series coils\u003c\/strong\u003e from other\u003cstrong\u003e Zeus tanks\u003c\/strong\u003e will not fit.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eQuarter-Turn Top Fill\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eTwist the cap a quarter turn. Two large fill ports. Pour. Twist shut. That is the whole process. No silicone tabs to wrestle open, no sliding doors that gunk up after a fortnight. The ports are wide enough for most dropper and squeezer bottle nozzles, so you are not trying to aim a thin stream into a pinhole while juice runs down the side. After dealing with tanks that turn refilling into a five-minute chore, a clean top-fill system almost feels like a luxury. It should not, but it does.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eSolid Build, Six Finishes\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eStainless steel. Pyrex glass. Gold-plated 510 pin for reliable conductivity. Measures 26mm at the base and roughly 32mm at the widest, so it looks right on larger dual-battery mods but may overhang a touch on compact single-battery devices. Worth checking your mod width before ordering if that sort of thing bothers you. Six colour options let you match your setup or clash with it on purpose. People who have been running one for six months or more tend to say it still looks and performs the way it did out of the box. For a tank at this price, that is saying something.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eGeekvape Z Max Sub Ohm Replacement Tank Colour Options\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eYou fill this tank yourself, so there are no flavour variants. The only decision is finish. Pirate Vapes stocks all six.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cstrong\u003e#buttons\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli data-end=\"93\" data-start=\"84\" data-section-id=\"t3dqof\"\u003eBlack\u003cspan class=\"PDq2pG_selectionAnchor\" aria-hidden=\"true\"\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"106\" data-start=\"94\" data-section-id=\"a7stb9\"\u003eGunmetal\u003c\/li\u003e\n\u003cli data-end=\"117\" data-start=\"107\" data-section-id=\"1l1v5i7\"\u003eSilver\u003c\/li\u003e\n\u003cli data-end=\"126\" data-start=\"118\" data-section-id=\"1vm4tva\"\u003eBlue\u003c\/li\u003e\n\u003cli data-end=\"135\" data-start=\"127\" data-section-id=\"1xca97s\"\u003eGold\u003c\/li\u003e\n\u003cli data-is-last-node=\"\" data-end=\"141\" data-start=\"136\" data-section-id=\"1o4swr\"\u003eRed\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eSame internals across every colour. Pick whatever looks right on your mod and move on.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eHow to Set Up the Geekvape Z Max Sub Ohm Replacement Tank\u003c\/span\u003e\u003c\/h2\u003e\n\u003col\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eUnscrew the base. The 0.14 ohm coil comes pre-installed. Want to start with the 0.2 ohm triple mesh instead? Push the pre-installed one out and press the spare firmly into place.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003ePrime the coil. Three or four drops of e-liquid directly onto the cotton visible through the wicking ports. This saturates the wick before your first draw and helps the coil last longer.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eScrew the base back on. Finger-tight is plenty.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eQuarter-turn the top cap to open the fill ports. Pour in your preferred high-VG juice from the\u003c\/span\u003e\u003cstrong\u003e\u003ca title=\"E-Liquids Collection\" href=\"https:\/\/piratevapes.co.uk\/collections\/e-liquids\" target=\"_blank\"\u003e E-Liquids\u003c\/a\u003e\u003c\/strong\u003e\u003cspan\u003e\u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/e-liquids\"\u003e\u003cstrong\u003e Collection\u003c\/strong\u003e\u003c\/a\u003e. Leave a small gap at the top.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eClose the cap firmly.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eStand it upright for five to ten minutes. Seriously. Do not skip this. Vaping on dry cotton is the fastest way to ruin a brand new coil and throw money away.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eThread it onto your 510 mod. Set wattage within the coil's range. 60W for the 0.14 ohm. 70W for the 0.2 ohm. Start at the low end and work up.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eTake a few shorter draws before going full lung. First few pulls let the cotton settle in and the flavour come through properly.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eWhat's in the Geekvape Z Max Sub Ohm Replacement Tank Box\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eTank, two coils, small bits. No mod, no batteries, no juice.\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003e1 x Geekvape Z Max Sub Ohm Tank\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003e1 x M Series 0.14 ohm Single Mesh Coil (pre-installed), rated 60 to 80W\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003e1 x M Series 0.2 ohm Triple Mesh Coil, rated 70 to 85W\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003e1 x 810 Drip Tip\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003e1 x Spare Parts Pack\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003e1 x User Manual\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eTwo coil types straight out of the box. Try both, figure out which wattage range you actually like, then buy a five-pack of whichever one wins.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eMade for Serious 510 Mods\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eStandard 510 thread. Sits on most regulated box mods without adapters, spacers, or anything awkward. Geekvape designed this tank to pair with the L200 Classic (Aegis Legend 2), a dual 21700 mod that pushes up to 200W. That combo is hard to fault. But you are not locked into it. Any regulated mod pushing between 60W and 85W will drive the included coils properly.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eCompatible devices:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eGeekvape L200 Classic (Aegis Legend 2)\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eGeekvape Z200 (Zeus 200)\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eMost regulated 510-threaded mods capable of the recommended wattage\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eCompatible coils:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eGeekvape M Series Coils (0.14 ohm single mesh, 0.2 ohm triple mesh, plus other variants in the M Series family)\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eM Series and Z Series coils are not interchangeable. Check before you order. If you need a mod to run this tank, browse the\u003c\/span\u003e\u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/vape-mods\"\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/a\u003e\u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/vape-mods\" title=\"Vape Mods\" target=\"_blank\"\u003e\u003cstrong\u003eVape Mods\u003c\/strong\u003e\u003c\/a\u003e\u003cspan\u003e\u003cstrong\u003e \u003c\/strong\u003ecollection for dual-battery options that match.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eAbout Geekvape\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eStarted in 2015 in Shenzhen. Small team. One goal: build vaping hardware that survives real life without compromising on performance. The\u003cstrong\u003e Aegis series \u003c\/strong\u003eis what made the name. Water-resistant, dust-resistant, shock-resistant, tested to actual industrial standards rather than just printed on a box. That reputation stuck. They have spent the decade since expanding into tanks, pods, coils, and full kits, and the Zeus tank family is probably their most well-known sub-ohm line at this point. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe Z Max sits within that range and uses their newer \u003cstrong\u003eM Series coils\u003c\/strong\u003e for improved cloud and flavour. \u003cstrong\u003e\u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/geekvape-vapes\" title=\"Geekvape Products\" target=\"_blank\"\u003eGeekvape Products\u003c\/a\u003e \u003c\/strong\u003eare sold in more than 70 countries. Multiple design awards, including a Red Dot. They build stuff that lasts.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eStock Up and Save\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eTwo coils gets you going but they are not going to last the month. A five-pack of \u003cstrong\u003eM Series coils \u003c\/strong\u003ealongside your tank keeps you sorted for a decent stretch without scrambling for replacements halfway through. \u003cstrong\u003ePirate Vapes\u003c\/strong\u003e packs every order with care, ships tracked via Royal Mail across the UK, and age-verifies every checkout. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eOur Geekvape stock is genuine, properly sourced, TPD-compliant. Browse the full\u003c\/span\u003e\u003ca title=\"Vape Tanks\" href=\"https:\/\/piratevapes.co.uk\/collections\/vape-tanks\" target=\"_blank\"\u003e\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eVape Tanks\u003c\/strong\u003e\u003c\/a\u003e\u003cspan\u003e\u003cstrong\u003e \u003c\/strong\u003ecollection if you want to weigh up your options before committing. No grey market hardware. No fakes. Just properly handled gear dispatched same day when you order before the cut-off.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eConclusion\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eTop airflow keeps the base dry. Mesh coils pull real flavour. Press-fit swaps take seconds. That covers the essentials of what the \u003cstrong\u003eGeekvape Z Max Sub Ohm Replacement Tank \u003c\/strong\u003edoes, and it does all three without making you fuss over it. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eSix colour finishes, two coils included, a 510 thread that works with practically anything above 60W, and a build that holds together long after cheaper tanks start rattling. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eIf you want a DTL tank that stays leak-free and tastes right for more than a week, the \u003cstrong\u003eZ Max\u003c\/strong\u003e earns its spot. Grab one from \u003cstrong\u003ePirate Vapes \u003c\/strong\u003ewith fast, age-verified UK delivery.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eFAQs\u003c\/span\u003e\u003c\/h2\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eDoes the Geekvape Z Max Sub Ohm Tank leak?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe top-to-bottom airflow keeps juice away from the base, which is where most tanks start leaking. Close the airflow when refilling, keep the cap tight, and issues are rare. No tank is perfectly leakproof under every single condition, but this one comes closer than most bottom-airflow designs out there.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eWhat coils does the Geekvape Z Max use?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eM Series only. A 0.14 ohm single mesh (60 to 80W) and a 0.2 ohm triple mesh (70 to 85W) come in the box. Five-packs of each are sold separately.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eWill the Z Max fit my mod?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eGot a 510 thread and 60W or more? It should work. Bear in mind the tank is 32mm at its widest, so it pairs best with larger dual-battery mods. Smaller single-battery setups may see a bit of overhang.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eWhat e-liquid should I use?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eHigh-VG. 70\/30 or thicker. Mesh coils running at 60W and above need that viscosity to wick properly and produce the clouds they are designed for. Nic salts are not a good fit here. They are made for lower-powered MTL setups and the throat hit at these wattages would be rough.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eIs this the same as the Zeus tank?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eSame family, different coils. The Z Max takes M Series coils. Other Zeus tanks use Z Series coils. They do not fit each other. Always check the coil type before you order replacements.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eCan I use 50\/50 e-liquid?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eNot really designed for it. Thinner juice wicks faster than the coil is built to handle, and you might notice some spitting or uneven vapour production. 70\/30 VG\/PG or higher gives the best results with this tank.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eHow long do the coils last?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eDepends on your wattage, your juice, and how hard you chain-vape. Sweeter liquids gunk mesh up faster than anything else. When the flavour drops off or starts tasting papery, swap it out.\u003c\/span\u003e\u003c\/p\u003e","brand":"Geekvape","offers":[{"title":"Black","offer_id":52534378889498,"sku":null,"price":19.99,"currency_code":"GBP","in_stock":true},{"title":"Gunmetal","offer_id":52534378922266,"sku":null,"price":19.99,"currency_code":"GBP","in_stock":true},{"title":"Silver","offer_id":52534378955034,"sku":null,"price":19.99,"currency_code":"GBP","in_stock":true},{"title":"Blue","offer_id":52534378987802,"sku":null,"price":19.99,"currency_code":"GBP","in_stock":true},{"title":"Gold","offer_id":52534379020570,"sku":null,"price":19.99,"currency_code":"GBP","in_stock":true},{"title":"Red","offer_id":52534379053338,"sku":null,"price":19.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0995\/5675\/3690\/files\/Geekvape_Z_Max_Sub_Ohm_Replacement_Tank.jpg?v=1784264320"},{"product_id":"smok-tfv18-mini-sub-ohm-tank","title":"Smok TFV18 Mini Sub-Ohm Tank","description":"\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eSmok TFV18 Mini Sub-Ohm Tank \u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eBig clouds. Rich flavour. Compact design. The \u003cstrong\u003eSMOK TFV18 Mini Sub-Ohm Tank\u003c\/strong\u003e is the downsized version of \u003cstrong\u003eSMOK's\u003c\/strong\u003e full \u003cstrong\u003eTFV18. 28mm wide\u003c\/strong\u003e, 2ml capacity for UK TPD, and it comes with two \u003cstrong\u003emesh coils\u003c\/strong\u003e in the box so you can try both before committing to a full replacement pack.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003e\u003cstrong\u003ePirate Vapes \u003c\/strong\u003ecarries all six colour options. The airflow ring adjusts between wide-open lung hits and something tighter if that is more your speed. Top-fill locks with a physical button. Tracked UK shipping and age-verified checkout on every order.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eWhy do vapers choose this\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eTwo mesh coils included. You get the 0.2ohm pre-installed and a spare 0.15ohm in the box. Try both before you buy a full pack of either.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003ePress-button top fill that actually locks. Not a friction-fit cap that slides open in your bag.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eThree bottom airflow slots. Wide open for a full lung hit, or dial them down for something with a bit more resistance to the draw.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003ePress-fit coil swaps. Pull the old one out, push the new one in. No threading, no cross-threading.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eStandard 510 connection. If your mod has a 510 pin and enough wattage, it will work.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eSmok TFV18 Mini Sub-Ohm Tank Features\u003c\/span\u003e\u003c\/h2\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eMesh Coils That Actually Deliver\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe 0.2ohm coil is a single mesh strip that covers a wider area of cotton than a traditional round wire. Heat distribution is more even. You get fewer hot spots developing on the wick, and flavour stays more consistent through the life of the coil rather than dropping off after the first day or two.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eFlat out, mesh coils changed how sub-ohm tanks perform. This is not new technology at this point. But SMOK has been doing it longer than most.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eThree-Slot Bottom Airflow\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThree large slots around the base of the tank. SMOK calls it a straight bottom-to-top airflow system. Open them all, and you get a very airy, unrestricted lung draw. Close them down and the draw tightens up. The ring turns smoothly enough and stays where you put it, which is not always a given with cheaper tanks where the AFC ring drifts between refills.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003ePress-Button Locking Top Fill\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eA button on the top cap. Press it, rotate the cap, and a kidney-shaped fill port opens up. Most standard bottle nozzles fit without making a mess. Push the cap back, and the button clicks into the locked position. This helps stop the cap from rotating open while the tank is in a pocket or bag. Plenty of tanks still rely on friction alone for this, and it shows.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eFive Copper Braces on the Deck\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003ePull the coil out, and you will see five vertical copper braces sitting on the deck. SMOK put them there to make direct contact with the coil base. The idea is more efficient power transfer from the mod to the coil. Whether you notice the difference in day-to-day use is debatable, but they are there, and they are part of the official design. Browse the\u003c\/span\u003e\u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/vape-tanks\"\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/a\u003e\u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/vape-tanks\" target=\"_blank\" title=\"Vape Tanks\" rel=\"noopener\"\u003e\u003cstrong\u003eVape Tanks\u003c\/strong\u003e\u003c\/a\u003e\u003cspan\u003e collection at Pirate Vapes if you want to see what else is out there in this price range.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003ePyrex Glass and Stainless Steel Build\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eReinforced Pyrex glass in a stainless steel frame. It handles \u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/high-vg-e-liquid\" target=\"_blank\" title=\"High-VG Liquid\" rel=\"noopener\"\u003e\u003cstrong\u003eHigh-VG Liquid\u003c\/strong\u003e\u003c\/a\u003e and heat without complaint, and the occasional knock will not crack it unless you are genuinely unlucky. SMOK includes a spare 2ml bubble glass in the box. Same capacity as the straight glass, just a slightly different shape. Keep it somewhere safe.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eSmok TFV18 Mini Sub-Ohm Tank Colour Options\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eYou fill this tank yourself, so there are no flavour variants. Just colours.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e#buttons\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli data-end=\"92\" data-start=\"83\" data-section-id=\"t3dqof\"\u003eBlack\u003cspan class=\"PDq2pG_selectionAnchor\" aria-hidden=\"true\"\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"101\" data-start=\"93\" data-section-id=\"1vm4tva\"\u003eBlue\u003c\/li\u003e\n\u003cli data-end=\"109\" data-start=\"102\" data-section-id=\"179h4gr\"\u003eRed\u003c\/li\u003e\n\u003cli data-end=\"118\" data-start=\"110\" data-section-id=\"1xca97s\"\u003eGold\u003c\/li\u003e\n\u003cli data-end=\"129\" data-start=\"119\" data-section-id=\"1l1v5i7\"\u003eSilver\u003c\/li\u003e\n\u003cli data-is-last-node=\"\" data-end=\"139\" data-start=\"130\" data-section-id=\"hji6ue\"\u003eRainbow\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eGrab a bottle of high VG liquid from the\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/e-liquids\"\u003e\u003cstrong\u003eE-Liquids\u003c\/strong\u003e\u003c\/a\u003e\u003cspan\u003e\u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/e-liquids\" target=\"_blank\" title=\"E-Liquids Collection\" rel=\"noopener\"\u003e\u003cstrong\u003e Collection\u003c\/strong\u003e\u003c\/a\u003e, and you are good to go.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eHow to Set Up the Smok TFV18 Mini Sub-Ohm Tank\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe 0.2ohm coil comes pre-installed, so half the job is already done.\u003c\/span\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eUnscrew the base and check for any packaging material left inside the tank.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003ePrime the coil. Drip 4 to 5 drops of e-liquid into each wicking port on the side. Let the cotton soak it up before you add more.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eScrew the base back onto the tank body. Finger-tight. Overdoing it just makes it harder to open next time.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003ePress the top cap button, rotate, and fill with high VG juice through the port. Do not go past the max line.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eClick the cap back into the locked position.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eStand the tank upright for 5 to 10 minutes. This part matters. Skip it, and you burn the cotton on the first draw.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eThread the tank onto your mod. Start low on the wattage and work up.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eTake a few short draws without fully inhaling to pull juice into the coil. If it tastes like cotton, give it another minute.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eWhat's in the Smok TFV18 Mini Sub-Ohm Tank Box\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eOne tank with the 0.2ohm V18 Mini Meshed coil pre-installed. One spare 0.15ohm V18 Mini Dual Meshed coil. A replacement 2ml bubble glass tube. User manual. Spare parts bag with O-rings.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eNo mod. No e-liquid. No batteries. You need all three separately.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eThe Right Fit for Your 510 Vape Mod\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003e510 threaded. Standard connection. Originally designed for the \u003cstrong\u003eSmok Fortis Kit\u003c\/strong\u003e, it works on anything from \u003cstrong\u003eGeekVape, Vaporesso, VooPoo, Innokin\u003c\/strong\u003e, or whoever else makes your mod. At 28mm across, it sits well on most dual-battery box mods and only slightly overhangs on smaller single-battery setups. The full TFV18 at 31.6mm is a different story. This one is much easier to pair.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eCoils are for the V18 Mini series only. Press-fit. Seconds to swap. The 0.2ohm runs best around 60W. Good flavour without high wattage. The 0.15ohm dual mesh is the cloud option, running between 80 and 110W with SMOK recommending 90W. Stock up on the\u003c\/span\u003e\u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/vape-coils\" target=\"_blank\" title=\" Vape Coils \" rel=\"noopener\"\u003e\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eVape Coils\u003c\/strong\u003e\u003c\/a\u003e\u003cspan\u003e\u003cstrong\u003e \u003c\/strong\u003ecollection so you are never caught short.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eAbout SMOK\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eSMOK has been around since 2010. The TFV4 put them on the map. First sub-ohm tank with quad coils. That was a genuine shift in how the industry thought about pre-built coil design, and the TFV line has kept going through mesh, higher wattages, and better airflow ever since. They also make the Novo pod series, RPM kits, box mods, the lot. Over 200 countries. One of the most recognisable names in vape hardware, whether you rate them or not.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eStock Up and Save\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eHow long a coil lasts depends on what you put through it. Sweet liquids, heavy colouring, chain vaping at max wattage. All of that shortens the window. Most people get somewhere between one and two weeks out of a \u003cstrong\u003eV18 Mini coil\u003c\/strong\u003e. Could be more, could be less.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003e\u003cstrong\u003ePirate Vapes \u003c\/strong\u003ecarries genuine \u003cstrong\u003e\u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/smok-vapes\" target=\"_blank\" title=\"SMOK Stock\" rel=\"noopener\"\u003eSMOK Stock\u003c\/a\u003e \u003c\/strong\u003eonly. Authorised suppliers, tracked shipping, glass packed so it actually arrives in one piece. Age-verified checkout on every order. TPD-compliant. Over 18s only.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eConclusion\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe \u003cstrong\u003eTFV18 Mini\u003c\/strong\u003e does the job. Mesh coils heat evenly, flavour is solid, and the three-slot airflow gives you enough range to find a draw you are happy with. The locking top fill works properly. The 510 connection fits anything capable of the right wattage. Two coils in the box. Six colours. No compatibility headaches.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eNot the flashiest tank on the market. Not trying to be. It is a well-built \u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/dtl-tanks\"\u003e\u003cstrong\u003eDTL Tank \u003c\/strong\u003e\u003c\/a\u003efrom a brand that has been making them for over a decade. \u003cstrong\u003ePirate Vapes\u003c\/strong\u003e ships it with fast, tracked UK delivery.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eFAQs\u003c\/span\u003e\u003c\/h2\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eIs the Smok TFV18 Mini a good tank for beginners?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eDepends what kind of beginner you are. Moved up from a pod kit and comfortable with the idea of wattage settings and coil changes? You will be fine with this. It is not complicated. But if you have never vaped before, a pod kit is probably a better starting point. This needs a separate mod and runs at higher power.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eWhat coils does the TFV18 Mini use?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eV18 Mini Coil Series. Only those. It ships with a 0.2ohm meshed coil (40 to 80W, best at 60W) and a 0.15ohm dual meshed coil (80 to 110W, best at 90W).\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eWill this tank fit my mod?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eGot a 510 connection? Then probably yes. The real question is wattage. The 0.2ohm coil needs at least 40W. The 0.15ohm needs 80W minimum. The tank is 28mm wide and sits comfortably on most box mods.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eHow long does a TFV18 Mini coil last?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eVaries. One to two weeks is typical. Sweet juice gunks coils faster. So does running at the very top of the wattage range all day. Prime your coils properly when you install them, and you will get more life out of them.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eCan I use nic salts in this tank?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eNot recommended. This is a sub-ohm DTL tank running at 40W and above. Nic salts are made for low-power MTL devices. Put 20mg nic salt through this at 60W and you will feel it in the back of your throat immediately. Freebase nicotine, 3mg or 6mg, high VG. That is what this tank wants.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eDoes the TFV18 Mini leak?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eNot if it is set up right. Coil seated properly, base tightened firmly, O-rings in good shape, not overfilled. That covers most leak issues. If you have changed the glass recently, double-check the seals are sitting flat.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eWhat is the difference between the TFV18 and the TFV18 Mini?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe full TFV18 is bigger all round. 31.6mm diameter, 7.5ml capacity in the non-TPD version, coils rated up to 140W. The Mini is 28mm, holds 2ml for UK compliance, and uses its own V18 Mini coil series at lower wattages. Easier to pair with smaller mods.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eWhat e-liquid works best with this tank?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eHigh VG. 70\/30 at minimum, 80\/20 if your bottle allows it. Mesh coils and thick juice go together. Thinner 50\/50 blends tend to flood the deck because they wick faster than the coil can vaporize them.\u003c\/span\u003e\u003c\/p\u003e","brand":"SMOK","offers":[{"title":"Black","offer_id":52534410477850,"sku":null,"price":10.99,"currency_code":"GBP","in_stock":true},{"title":"Blue","offer_id":52534410510618,"sku":null,"price":10.99,"currency_code":"GBP","in_stock":true},{"title":"Red","offer_id":52534410543386,"sku":null,"price":10.99,"currency_code":"GBP","in_stock":true},{"title":"Gold","offer_id":52534410576154,"sku":null,"price":10.99,"currency_code":"GBP","in_stock":true},{"title":"Silver","offer_id":52534410608922,"sku":null,"price":10.99,"currency_code":"GBP","in_stock":true},{"title":"Rainbow","offer_id":52534410641690,"sku":null,"price":10.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0995\/5675\/3690\/files\/Smok_TFV18_Mini_Sub-Ohm_Tank.jpg?v=1784266781"},{"product_id":"voopoo-tpp-tank","title":"VooPoo TPP Pod Tank","description":"\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eVooPoo TPP Pod Tank\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eSub-ohm tank with a\u003cstrong\u003e \u003c\/strong\u003e\u003c\/span\u003e\u003cstrong\u003e510 thread\u003c\/strong\u003e\u003cspan\u003e\u003cstrong\u003e \u003c\/strong\u003eand a magnetic pod connection. The \u003cstrong\u003eVooPoo TPP Pod Tank\u003c\/strong\u003e holds \u003c\/span\u003e\u003cspan\u003e2ml under UK TPD\u003c\/span\u003e\u003cspan\u003e rules, runs on\u003cstrong\u003e VooPoo's \u003c\/strong\u003e\u003c\/span\u003e\u003cstrong\u003eTPP mesh coils\u003c\/strong\u003e\u003cspan\u003e, and ships with two coils in the box: the \u003c\/span\u003e\u003cstrong\u003eTPP-DM1 at 0.15ohm (60-80W) \u003c\/strong\u003eand the \u003cstrong\u003eTPP-DM2 at 0.2ohm\u003c\/strong\u003e\u003cspan\u003e\u003cstrong\u003e (40-60W)\u003c\/strong\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eDual adjustable bottom airflow lets you tighten or loosen the draw to suit your preference. Stainless steel body, bottom fill port, three colour options. Designed originally for the Drag X Plus but works on any 510-threaded mod.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eWhy vapers choose this:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eTPP mesh coils ramp up fast\u003c\/span\u003e\u003cspan\u003e and deliver sharper flavour than the older PnP coil system they replaced, which is the main reason VooPoo built this tank\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003e510 threading with magnetic attachment\u003c\/span\u003e\u003cspan\u003e means it clips onto the mod securely but still comes off easily for refilling and coil swaps\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eDual adjustable bottom airflow\u003c\/span\u003e\u003cspan\u003e gives you genuine control over how tight or open the draw feels, from restricted DTL to wide-open clouds\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eStainless steel construction\u003c\/span\u003e\u003cspan\u003e is solid in the hand and handles being knocked around better than the plastic pod tanks in VooPoo's lower-tier range\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eTwo coils included\u003c\/span\u003e\u003cspan\u003e so you can try both wattage ranges out of the box before buying a full pack of\u003c\/span\u003e\u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/voopoo-coils\"\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/a\u003e\u003ca title=\"VooPoo Coils\" href=\"https:\/\/piratevapes.co.uk\/collections\/voopoo-coils\" target=\"_blank\"\u003e\u003cstrong\u003eVooPoo Coils\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eVooPoo TPP Pod Tank Features\u003c\/span\u003e\u003c\/h2\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eTPP Coils Are the Upgrade\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eVooPoo built the TPP coil as the successor to the PnP series. Larger mesh surface, faster heating, thicker vapour. The difference is noticeable from the first draw. If you have used PnP coils before and thought they were decent, the TPP is a clear step up in both flavour and cloud density. The tank was designed around these coils, so the airflow and chamber proportions are optimised for how TPP heads heat\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003ee-liquid\u003c\/span\u003e\u003cspan\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eDual Bottom Airflow That Actually Adjusts\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eSome tanks have adjustable airflow that barely changes the draw. This one does. Two airflow slots on the base let you go from wide-open DTL clouds right down to a noticeably restricted draw with more flavour concentration. Most sub-ohm vapers will land somewhere in the middle. But having the full range available means you can dial it in rather than just accepting whatever the tank gives you.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003e510 Thread Goes on Almost Anything\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe TPP Pod Tank uses a standard \u003c\/span\u003e\u003cspan\u003e510 connection\u003c\/span\u003e\u003cspan\u003e with an included adaptor, which means it fits on virtually any\u003c\/span\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/vape-mods\"\u003e \u003c\/a\u003e\u003ca title=\"Vape Mod\" href=\"https:\/\/piratevapes.co.uk\/collections\/vape-mods\" target=\"_blank\"\u003eVape Mod\u003c\/a\u003e\u003c\/strong\u003e\u003cspan\u003e\u003cstrong\u003e \u003c\/strong\u003eyou already own. Designed for the Drag X Plus originally, but there is nothing stopping you from pairing it with a mod from a completely different brand. If it has a 510 pin, it works.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eBuilt in Stainless Steel\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eNot plastic. Not aluminium alloy dressed up to look like steel. Actual stainless steel body. Heavier than cheaper tanks, yes. But it feels like a proper piece of hardware, and it does not scratch, crack, or flex when you tighten it onto a mod. Three colours available: \u003c\/span\u003e\u003cspan\u003eBlack\u003c\/span\u003e\u003cspan\u003e, \u003c\/span\u003e\u003cspan\u003eSilver\u003c\/span\u003e\u003cspan\u003e, and \u003c\/span\u003e\u003cspan\u003eGunmetal\u003c\/span\u003e\u003cspan\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eBottom Fill Without the Mess\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eUnscrew the base, fill through the port, screw it back on. The silicone seal around the fill hole keeps liquid from leaking out during the process, which is something not every bottom-fill tank manages to get right. Not as convenient as a top-fill system, honestly. But VooPoo prioritised airflow design over fill convenience, and the trade-off works in practice.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eVooPoo TPP Pod Tank Colours\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThis is a tank, so colour is about matching your mod rather than anything else. Three options:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e#buttons\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli data-end=\"76\" data-start=\"67\" data-section-id=\"t3dqof\"\u003eBlack\u003cspan class=\"PDq2pG_selectionAnchor\" aria-hidden=\"true\"\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"87\" data-start=\"77\" data-section-id=\"1l1v5i7\"\u003eSilver\u003c\/li\u003e\n\u003cli data-is-last-node=\"\" data-end=\"98\" data-start=\"88\" data-section-id=\"1860rfp\"\u003eGunmetal\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eHow to Set Up the VooPoo TPP Pod Tank\u003c\/span\u003e\u003c\/h2\u003e\n\u003col\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eUnscrew the base of the tank and push a \u003c\/span\u003e\u003cspan\u003eTPP coil\u003c\/span\u003e\u003cspan\u003e into the pod section from below until it clicks into place.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eDrop \u003c\/span\u003e\u003cspan\u003ethree to four drops of e-liquid\u003c\/span\u003e\u003cspan\u003e directly onto the cotton visible through the coil ports to pre-saturate the wick.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eFill the tank with \u003c\/span\u003e\u003cspan\u003ee-liquid\u003c\/span\u003e\u003cspan\u003e through the bottom fill port. Do not overfill past the max line.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eScrew the base back on firmly and leave the assembled tank sitting flat for about \u003c\/span\u003e\u003cspan\u003efive minutes\u003c\/span\u003e\u003cspan\u003e before your first draw.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eAttach the tank to your mod using the \u003c\/span\u003e\u003cspan\u003e510 adaptor\u003c\/span\u003e\u003cspan\u003e included in the box.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eAdjust the \u003c\/span\u003e\u003cspan\u003edual bottom airflow\u003c\/span\u003e\u003cspan\u003e to your preference and start vaping at the lower end of the coil's recommended wattage.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eWhat's in the VooPoo TPP Pod Tank Box\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eOne TPP Pod Tank in your selected colour, one TPP-DM1 0.15ohm coil, one TPP-DM2 0.2ohm coil, one 510 adaptor, and a user manual. No e-liquid, no mod, no battery included.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003ePairs with Any 510-Threaded Mod in the VooPoo Range and Beyond\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe \u003cstrong\u003eTPP Pod Tank\u003c\/strong\u003e was built to sit on the \u003c\/span\u003e\u003cstrong\u003eDrag X Plus\u003c\/strong\u003e\u003cspan\u003e, but the 510 threading means it works on any mod with a 510 connection point. That includes the\u003cstrong\u003e Drag 3, Drag S Pro, Drag Max\u003c\/strong\u003e, and essentially every other VooPoo mod that uses a 510 pin. It also works on mods from other brands. The only requirement is that the mod pushes enough wattage for the TPP coils: 40W minimum for the DM2, 60W minimum for the DM1.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe tank uses \u003cstrong\u003eVooPoo's \u003c\/strong\u003e\u003c\/span\u003e\u003cstrong\u003eTPP coil\u003c\/strong\u003e\u003cspan\u003e family exclusively. PnP coils will not fit this tank. Make sure you are ordering TPP heads, not PnP, when buying replacements.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eAbout VooPoo\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eVooPoo\u003c\/span\u003e\u003cspan\u003e made its name with the original Drag mod. The GENE chip inside it delivered faster firing speed than most competitors at the time, and the resin panels became one of the most recognisable designs in vaping. The Drag series expanded from there into pod mods, pod kits, and now dedicated\u003c\/span\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/vape-tanks\"\u003e \u003c\/a\u003e\u003ca title=\"Vape Tanks\" href=\"https:\/\/piratevapes.co.uk\/collections\/vape-tanks\" target=\"_blank\"\u003eVape Tanks\u003c\/a\u003e\u003c\/strong\u003e\u003cspan\u003e\u003cstrong\u003e \u003c\/strong\u003elike the TPP. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe TPP coil platform was VooPoo's answer to growing demand for better sub-ohm performance in a pod-style format, and the tank itself carries that engineering forward with adjustable airflow and a stainless steel build.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eStock Up and Save\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe tank ships with two coils, but at sub-ohm wattage you will need replacements within a couple of weeks. Adding a pack of \u003cstrong\u003eTPP-DM coils \u003c\/strong\u003eto the basket alongside the tank means you are covered for a good month without reordering. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eEvery order from \u003c\/span\u003e\u003cstrong\u003ePirate Vapes\u003c\/strong\u003e\u003cspan\u003e ships the same day before 4 pm in padded packaging. TPD-compliant stock, age-verified checkout, over-18s only. Free Pirate Post on orders over £25.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eConclusion\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe \u003cstrong\u003eVooPoo TPP Pod Tank\u003c\/strong\u003e is a well-built sub-ohm tank that bridges the gap between pod convenience and traditional tank performance. The TPP mesh coils deliver strong flavour and dense vapour, the dual airflow actually gives you range, and the 510 connection means it fits on whatever mod you already own. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eIf you want a \u003cstrong\u003e\u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/dtl-tanks\" target=\"_blank\" title=\"DTL Tank\" rel=\"noopener\"\u003eDTL Tank\u003c\/a\u003e \u003c\/strong\u003ethat takes two minutes to set up and performs consistently, this does the job. Browse more\u003c\/span\u003e\u003ca title=\"Vape Accessories\" href=\"https:\/\/piratevapes.co.uk\/collections\/vape-accessories\" target=\"_blank\"\u003e\u003cspan\u003e \u003cstrong\u003eV\u003c\/strong\u003e\u003c\/span\u003e\u003cstrong\u003eape Accessories\u003c\/strong\u003e\u003c\/a\u003e\u003cspan\u003e\u003cstrong\u003e \u003c\/strong\u003eat\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003ePirate Vapes\u003c\/strong\u003e\u003cspan\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eFAQs\u003c\/span\u003e\u003c\/h2\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eWhat coils does this tank use?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eTPP coils only.\u003c\/span\u003e\u003cspan\u003e Not PnP. Common mix-up since VooPoo runs both platforms. The TPP-DM series is what you need. Two come in the box to get you started.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eWill it fit on a non-VooPoo mod?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eYes. Standard \u003c\/span\u003e\u003cspan\u003e510 threading\u003c\/span\u003e\u003cspan\u003e with an adaptor in the box. Any mod that fires at 40W or above and has a 510 pin will work.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eWhat e-liquid ratio works best?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eHigh VG. \u003c\/span\u003e\u003cspan\u003e70\/30 or above\u003c\/span\u003e\u003cspan\u003e with freebase nicotine at 3-6mg. These are sub-ohm coils running at 40-80W. Not suited for nic salts or 50\/50 blends.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eHow do I refill the tank?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eBottom fill. Unscrew the base, fill through the silicone-sealed port, screw it back on. Takes about thirty seconds.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eHow long do the included coils last?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eRoughly one to two weeks each depending on wattage and liquid. The DM2 at lower wattage tends to outlast the DM1. Sweeter liquids shorten both.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eIs the 5.5ml capacity available in the UK?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe UK TPD version holds \u003c\/span\u003e\u003cspan\u003e2ml\u003c\/span\u003e\u003cspan\u003e. The 5.5ml figure is the international capacity and may not apply to the version sold by UK retailers.\u003c\/span\u003e\u003c\/p\u003e","brand":"VooPoo","offers":[{"title":"Black","offer_id":52534419390746,"sku":null,"price":7.99,"currency_code":"GBP","in_stock":true},{"title":"Silver","offer_id":52534419423514,"sku":null,"price":7.99,"currency_code":"GBP","in_stock":true},{"title":"Gunmetal","offer_id":52534419456282,"sku":null,"price":7.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0995\/5675\/3690\/files\/VooPoo_TPP_Pod_Tank.jpg?v=1784267536"},{"product_id":"uwell-valyrian-2-pro-tank","title":"Uwell Valyrian 2 Pro Replacement Tank","description":"\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eUwell Valyrian 2 Pro Replacement Tank\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThirty-two millimetres wide and built to run between 80 and 120W. The \u003cstrong\u003eValyrian 2 Pro\u003c\/strong\u003e is not a subtle tank. It uses \u003cstrong\u003eUwell's \u003c\/strong\u003e\u003c\/span\u003e\u003cstrong\u003eUN2 mesh coil\u003c\/strong\u003e\u003cspan\u003e\u003cstrong\u003e \u003c\/strong\u003eseries with configurations ranging from single coil through to quad, and it ships with two coils and a spare glass in the box. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003ePRO-FOCS flavour technology\u003c\/span\u003e\u003cspan\u003e is Uwell's proprietary coil structure, designed to maximise how much flavour the mesh pulls from your\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003ee-liquid\u003c\/span\u003e\u003cspan\u003e. Hinged flip cap for quick top fills. \u003c\/span\u003e\u003cspan\u003e810 widebore drip tip\u003c\/span\u003e\u003cspan\u003e. \u003c\/span\u003e\u003cspan\u003e510 threaded\u003c\/span\u003e\u003cspan\u003e for any mod that can push the wattage these coils want.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eWhy vapers choose this:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003ePRO-FOCS coil structure\u003c\/span\u003e\u003cspan\u003e is Uwell's approach to flavour optimisation, and the Valyrian 2 Pro is where it performs best since the chamber and airflow are engineered around it\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eFour UN2 coil configurations\u003c\/span\u003e\u003cspan\u003e from single mesh at 90W through to quad mesh at 120W give you a genuine range of performance within the same tank\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eHinged flip cap\u003c\/span\u003e\u003cspan\u003e opens the fill port without unscrewing anything, making top fills fast and clean even at 32mm width\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eSelf-cleaning technology\u003c\/span\u003e\u003cspan\u003e is patented by Uwell and designed to reduce condensation buildup in the tank's chimney, which keeps the 810 drip tip cleaner for longer\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eSpare glass and O-rings in the box\u003c\/span\u003e\u003cspan\u003e mean you have replacement parts on hand from day one, which matters for a tank this wide that lives on top of a high-wattage mod\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eUwell Valyrian 2 Pro Replacement Tank Features\u003c\/span\u003e\u003c\/h2\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003ePRO-FOCS Is Uwell's Flavour Approach\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe name stands for Pro-Flavour Optimised Coil Structure. Rather than just flattening a mesh strip and calling it done, Uwell shaped the coil housing and airflow path around how vapour moves through the chamber after heating. The result is denser flavour at higher wattage without the harshness that some sub-ohm tanks produce above 80W. Worth trying if you have used other sub-ohm tanks and felt the flavour dropped off at higher power.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eFour Coil Configurations, One Tank\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe UN2 Single at \u003c\/span\u003e\u003cspan\u003e0.32ohm\u003c\/span\u003e\u003cspan\u003e runs 90-100W. The UN2-2 Dual at \u003c\/span\u003e\u003cspan\u003e0.14ohm\u003c\/span\u003e\u003cspan\u003e sits at 80-90W. The UN2-3 Triple at \u003c\/span\u003e\u003cspan\u003e0.16ohm\u003c\/span\u003e\u003cspan\u003e pushes 90-100W. And the FeCrAl Quad at \u003c\/span\u003e\u003cspan\u003e0.15ohm\u003c\/span\u003e\u003cspan\u003e reaches \u003c\/span\u003e\u003cspan\u003e100-120W\u003c\/span\u003e\u003cspan\u003e for maximum cloud density. That is a lot of variety from a single coil platform. Most sub-ohm tanks give you two options. This one gives you four.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eHinged Cap, Not a Screw Cap\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe flip cap design is genuinely faster than a threaded or slide-open top fill. Pull it open, fill through the port, push it closed. No alignment, no cross-threading, no dripping liquid because the cap came off at a bad angle. One of those small design decisions that makes daily use noticeably better.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eSelf-Cleaning Chimney\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eCondensation inside the chimney is a common issue on high-wattage tanks. Uwell patented a self-cleaning system for the Valyrian 2 Pro that channels condensed liquid back down into the tank rather than letting it pool around the drip tip. Does it completely eliminate spit-back? Not entirely. But it reduces it meaningfully compared to tanks without the feature.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003e810 Widebore for Open Draws\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe included drip tip is an 810 widebore. Wide opening, comfortable on the lips, designed for high-volume DTL inhales. If you prefer a narrower draw, any standard 810 drip tip will fit as a replacement. But for the kind of wattage this tank runs at, the stock widebore suits the airflow design well.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eUwell Valyrian 2 Pro Replacement Tank Colours\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThree options. All use the same Pyrex glass and stainless steel construction, just different finishes on the metal components:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003e#buttons\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\"\u003eBlack Silver\u003c\/li\u003e\n\u003cli dir=\"ltr\"\u003eBlack Red\u003c\/li\u003e\n\u003cli dir=\"ltr\"\u003eFull Black\u003cspan\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eHow to Set Up the Uwell Valyrian 2 Pro Replacement Tank\u003c\/span\u003e\u003c\/h2\u003e\n\u003col\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eUnscrew the base of the tank and thread a \u003c\/span\u003e\u003cspan\u003eUN2 coil\u003c\/span\u003e\u003cspan\u003e into the base section clockwise until snug. Do not overtighten.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003ePrime the coil by dropping \u003c\/span\u003e\u003cspan\u003efour to five drops of e-liquid\u003c\/span\u003e\u003cspan\u003e onto the cotton through each wicking port and the top opening.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eScrew the base back onto the tank body and attach the assembled tank to your\u003c\/span\u003e\u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/vape-mods\"\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/a\u003e\u003ca title=\"Vape Mod\" href=\"https:\/\/piratevapes.co.uk\/collections\/vape-mods\" target=\"_blank\"\u003e\u003cstrong\u003eVape Mod\u003c\/strong\u003e\u003c\/a\u003e\u003cspan\u003e via the \u003c\/span\u003e\u003cspan\u003e510 thread\u003c\/span\u003e\u003cspan\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eFlip open the \u003c\/span\u003e\u003cspan\u003ehinged top cap\u003c\/span\u003e\u003cspan\u003e and fill through the port with \u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/high-vg-e-liquid\" target=\"_blank\" title=\"High VG Shortfill\" rel=\"noopener\"\u003e\u003cstrong\u003eHigh VG\u003c\/strong\u003e\u003c\/a\u003e\u003c\/span\u003e\u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/high-vg-e-liquid\"\u003e\u003cstrong\u003e Shortfill\u003c\/strong\u003e\u003c\/a\u003e\u003cspan\u003e\u003cstrong\u003e \u003c\/strong\u003eor freebase liquid.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eClose the cap and let the tank stand upright for \u003c\/span\u003e\u003cspan\u003efive to ten minutes\u003c\/span\u003e\u003cspan\u003e. These are thick mesh coils at high wattage, so a proper soak matters.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eStart at the \u003c\/span\u003e\u003cspan\u003elowest recommended wattage\u003c\/span\u003e\u003cspan\u003e for your coil and increase gradually over the first handful of draws.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eWhat's in the Uwell Valyrian 2 Pro Replacement Tank Box\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eOne Valyrian 2 Pro tank in your chosen colour. \u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eOne \u003c\/span\u003e\u003cspan\u003e0.32ohm UN2 Single mesh coil\u003c\/span\u003e\u003cspan\u003e. \u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eOne \u003c\/span\u003e\u003cspan\u003e0.14ohm UN2-2 Dual mesh coil\u003c\/span\u003e\u003cspan\u003e. \u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eOne replacement Pyrex glass tube. \u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eA pack of spare O-rings. \u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eAnd a user manual. \u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThat is a generous package for a standalone tank.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eRuns on Any High-Wattage 510 Mod in the Uwell Range and Beyond\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe \u003cstrong\u003eValyrian 2 Pro\u003c\/strong\u003e uses \u003c\/span\u003e\u003cspan\u003e510 threading\u003c\/span\u003e\u003cspan\u003e and needs a mod capable of reaching at least \u003c\/span\u003e\u003cspan\u003e80W\u003c\/span\u003e\u003cspan\u003e to drive the lowest-wattage coil in the UN2 range. For the quad coil at \u003cstrong\u003e100-120W\u003c\/strong\u003e, you need a dual-battery mod or a high-capacity single-battery device.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe tank runs exclusively on \u003cstrong\u003eUwell's \u003c\/strong\u003e\u003c\/span\u003e\u003cstrong\u003eUN2 coil\u003c\/strong\u003e\u003cspan\u003e\u003cstrong\u003e series\u003c\/strong\u003e. Four options exist: single, dual, triple, and quad mesh. Two ship with the tank. The others are available as separate purchases. Caliburn coils, Crown coils, and other \u003c\/span\u003e\u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/uwell-vapes\"\u003e\u003cstrong\u003eUwell\u003c\/strong\u003e\u003c\/a\u003e\u003cspan\u003e\u003ca title=\"Uwell Platforms\" href=\"https:\/\/piratevapes.co.uk\/collections\/uwell-vapes\" target=\"_blank\"\u003e\u003cstrong\u003e Platforms\u003c\/strong\u003e\u003c\/a\u003e will not fit.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eAbout Uwell\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eUwell is known in the UK primarily for the Caliburn pod range. But the Valyrian series is where their sub-ohm engineering lives. The original Valyrian tank was already well-regarded for flavour production, and the Valyrian 2 Pro pushed that further with the PRO-FOCS coil structure and the self-cleaning chimney. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eWhere the Caliburn targets simplicity and portability, the Valyrian targets performance. Different audience, different approach, same engineering standard. The \u003cstrong\u003eUN2 coil \u003c\/strong\u003eplatform is the backbone of that, offering single through quad mesh configurations from one\u003c\/span\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/vape-tanks\"\u003e \u003c\/a\u003e\u003ca title=\"Vape Tank\" href=\"https:\/\/piratevapes.co.uk\/collections\/vape-tanks\" target=\"_blank\"\u003eVape Tank\u003c\/a\u003e\u003c\/strong\u003e\u003cspan\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eStock Up and Save\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe tank ships with two coils and a spare glass, which is a strong start. But at 80-120W, those coils will not last as long as lower-wattage heads. Adding a pack of UN2 replacements to the order means you are covered for a solid month of daily use. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eEvery order from \u003c\/span\u003e\u003cstrong\u003ePirate Vapes\u003c\/strong\u003e\u003cspan\u003e ships the same day before 4 pm in padded packaging. TPD-compliant stock, age-verified checkout, over-18s only. Free Pirate Post on orders over £25.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eConclusion\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe \u003cstrong\u003eValyrian 2 Pro \u003c\/strong\u003eis a high-performance sub-ohm tank for vapers who want cloud volume and flavour intensity at 80W and above. Four coil options, a self-cleaning chimney, flip-cap filling, and a spare glass in the box. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eNot a tank for beginners, but if you already own a capable mod and want the best flavour Uwell's sub-ohm range can deliver, this is it. Browse more\u003c\/span\u003e\u003cstrong\u003e \u003ca title=\"Vape Accessories\" href=\"https:\/\/piratevapes.co.uk\/collections\/vape-accessories\" target=\"_blank\"\u003eVape Accessories\u003c\/a\u003e\u003c\/strong\u003e\u003cspan\u003e at\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003ePirate Vapes\u003c\/strong\u003e\u003cspan\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eFAQs\u003c\/span\u003e\u003c\/h2\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eWhat coils does this tank use?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eUwell UN2 series.\u003c\/span\u003e\u003cspan\u003e Four options from single to quad mesh. Two come in the box (0.32ohm single and 0.14ohm dual). The triple and quad are sold separately.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eWhat wattage mod do I need?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003e80W minimum\u003c\/span\u003e\u003cspan\u003e for the dual coil. \u003c\/span\u003e\u003cspan\u003e100-120W\u003c\/span\u003e\u003cspan\u003e for the quad. A dual-battery mod is recommended for the higher-wattage coils.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eWhat e-liquid works best?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eHigh VG, 70\/30 or above\u003c\/span\u003e\u003cspan\u003e, freebase at 3mg. These coils burn through liquid at high wattage, so thick juice with low nicotine is the way to go. Not suited for nic salts.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eHow do I refill the tank?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eFlip the \u003c\/span\u003e\u003cspan\u003ehinged top cap\u003c\/span\u003e\u003cspan\u003e open, fill through the port, close it. No unscrewing required.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eDoes the spare glass fit all three colour options?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eYes. Same Pyrex glass tube across every colour. The glass is clear regardless of the metal finish.\u003c\/span\u003e\u003c\/p\u003e","brand":"Uwell","offers":[{"title":"Black Silver","offer_id":52534444163354,"sku":null,"price":26.99,"currency_code":"GBP","in_stock":true},{"title":"Black Red","offer_id":52534444196122,"sku":null,"price":26.99,"currency_code":"GBP","in_stock":true},{"title":"Full Black","offer_id":52534444228890,"sku":null,"price":26.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0995\/5675\/3690\/files\/Uwell_Valyrian_2_Pro_Replacement_Tank.jpg?v=1784269503"},{"product_id":"smok-tfv9-tank","title":"SMOK TFV9 Replacement Tank","description":"\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eSMOK TFV9 Replacement Tank\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eEight colours. That alone tells you \u003cstrong\u003eSMOK expect\u003c\/strong\u003es this tank to sell. The \u003cstrong\u003eTFV9 \u003c\/strong\u003eis a \u003c\/span\u003e\u003cspan\u003e28mm sub-ohm \u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/dtl-tanks\" target=\"_blank\" title=\"DTL Tank\" rel=\"noopener\"\u003e\u003cstrong\u003eDTL Tank\u003c\/strong\u003e\u003c\/a\u003e\u003c\/span\u003e\u003cspan\u003e running \u003c\/span\u003e\u003cspan\u003e\u003cstrong\u003eV9 mesh coils\u003c\/strong\u003e at\u003cstrong\u003e 0.15 ohm\u003c\/strong\u003e\u003c\/span\u003e\u003cspan\u003e, with a \u003c\/span\u003e\u003cspan\u003echildproof locking swivel top-fill\u003c\/span\u003e\u003cspan\u003e, \u003c\/span\u003e\u003cspan\u003edual adjustable bottom airflow\u003c\/span\u003e\u003cspan\u003e, a \u003c\/span\u003e\u003cspan\u003ePyrex bubble glass\u003c\/span\u003e\u003cspan\u003e section holding \u003c\/span\u003e\u003cspan\u003e2ml under UK TPD\u003c\/span\u003e\u003cspan\u003e, and a \u003c\/span\u003e\u003cspan\u003e510 thread\u003c\/span\u003e\u003cspan\u003e that screws onto any mod you already own. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eCross-compatible with \u003c\/span\u003e\u003cstrong\u003eV8 Baby 0.15 ohm coils\u003c\/strong\u003e\u003cspan\u003e if you have those lying around. Stainless steel construction, massive airflow channels, and a top cap that locks shut so it does not open in your pocket. Over 18s only.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eWhy vapers choose this:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eV9 mesh at 0.15 ohm\u003c\/span\u003e\u003cspan\u003e for dense DTL cloud and strong flavour at sub-ohm wattages\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eDual adjustable bottom airflow\u003c\/span\u003e\u003cspan\u003e with wide channels. Open for maximum air, tighten for a restricted DTL pull.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eChildproof locking swivel top-cap\u003c\/span\u003e\u003cspan\u003e that stays closed until you deliberately unlock and twist it\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eCross-compatible\u003c\/span\u003e\u003cspan\u003e with V8 Baby 0.15 ohm coils. One tank, two coil families.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eEight colour options\u003c\/span\u003e\u003cspan\u003e from Matte Black through to Rainbow. More finishes than most tanks offer.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eSMOK TFV9 Replacement Tank Features\u003c\/span\u003e\u003c\/h2\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eThe Airflow Channels Are Genuinely Massive\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eTwo \u003c\/span\u003e\u003cspan\u003edual airflow slots\u003c\/span\u003e\u003cspan\u003e carved into the base of the tank. Open them fully, and the TFV9 pulls air like a chimney. The draw at maximum airflow is about as loose as DTL gets without moving to an RDA. Tighten them down, and you get a restricted DTL pull that concentrates the flavour. The adjustment ring rotates smoothly and stays where you set it. If you have used older SMOK tanks where the airflow ring drifted over time, the TFV9 ring holds its position better.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eThe Top-Fill Locks and That Matters More Than You Think\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe \u003c\/span\u003e\u003cspan\u003elocking swivel top-cap\u003c\/span\u003e\u003cspan\u003e requires you to push down and twist before the fill port opens. Childproof by design. But the practical benefit goes beyond child safety: the cap does not accidentally slide open in a pocket, a bag, or a tool belt. Older tanks with simple swivel tops would shift open under pressure and leak liquid everywhere. The TFV9 mechanism prevents that. Push, twist, fill, twist back. Locked.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eV9 Mesh Coils and V8 Baby Backward Compatibility\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe TFV9 ships with a \u003c\/span\u003e\u003cspan\u003eV9 Mesh 0.15 ohm coil\u003c\/span\u003e\u003cspan\u003e pre-installed. SMOK designed this coil specifically for the TFV9 airflow path. But the tank also accepts \u003c\/span\u003e\u003cspan\u003eV8 Baby 0.15 ohm coils\u003c\/span\u003e\u003cspan\u003e, which means if you are upgrading from a TFV8 Baby tank or a SMOK kit that used V8 Baby coils, your existing stock is not wasted. Grab\u003c\/span\u003e\u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/smok-coils\"\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/a\u003e\u003ca title=\"SMOK Replacement Coils\" href=\"https:\/\/piratevapes.co.uk\/collections\/smok-coils\" target=\"_blank\"\u003e\u003cstrong\u003eSMOK Replacement Coils\u003c\/strong\u003e\u003c\/a\u003e\u003cspan\u003e in whichever family suits you.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eBubble Glass Holds the Full 2ml Without Feeling Cramped\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe \u003c\/span\u003e\u003cspan\u003ePyrex bubble glass\u003c\/span\u003e\u003cspan\u003e section curves outward slightly from the 28mm base, which maximises the internal volume within the 2ml TPD limit. The shape also makes the liquid level easier to read because the glass is wider in the middle where you spend most of your time checking. A replacement glass tube ships in the box, which is useful because bubble glass is more exposed to knocks than straight-walled tanks.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003e28mm Diameter Handles High Wattage Without Overheating\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eWider tanks dissipate heat better than narrow ones. At sub-ohm wattage through a 0.15 ohm mesh coil, the TFV9 generates real heat during extended sessions. The \u003c\/span\u003e\u003cspan\u003e28mm stainless steel body\u003c\/span\u003e\u003cspan\u003e spreads that thermal load across a larger surface area, which keeps the tank comfortable to touch and the liquid at a stable temperature. Narrower tanks at the same wattage get noticeably warmer.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eSMOK TFV9 Replacement Tank Colours\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eEight finishes. Same internals, same glass, same coil fit.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e#buttons\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli data-section-id=\"ioxona\" data-start=\"106\" data-end=\"121\"\u003eMatte Black\u003cspan aria-hidden=\"true\" class=\"PDq2pG_selectionAnchor\"\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli data-section-id=\"a7stb9\" data-start=\"122\" data-end=\"134\"\u003eGunmetal\u003c\/li\u003e\n\u003cli data-section-id=\"1l1v5i7\" data-start=\"135\" data-end=\"145\"\u003eSilver\u003c\/li\u003e\n\u003cli data-section-id=\"1vm4tva\" data-start=\"146\" data-end=\"154\"\u003eBlue\u003c\/li\u003e\n\u003cli data-section-id=\"179h4gr\" data-start=\"155\" data-end=\"162\"\u003eRed\u003c\/li\u003e\n\u003cli data-section-id=\"1xca97s\" data-start=\"163\" data-end=\"171\"\u003eGold\u003c\/li\u003e\n\u003cli data-section-id=\"whto2b\" data-start=\"172\" data-end=\"181\"\u003eGreen\u003c\/li\u003e\n\u003cli data-section-id=\"hji6ue\" data-start=\"182\" data-end=\"191\" data-is-last-node=\"\"\u003eRainbow\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eHow to Set Up the SMOK TFV9 Replacement Tank\u003c\/span\u003e\u003c\/h2\u003e\n\u003col\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eThe \u003c\/span\u003e\u003cspan\u003eV9 Mesh 0.15 ohm coil\u003c\/span\u003e\u003cspan\u003e comes pre-installed. Before filling, tilt the tank and drip a few drops of\u003c\/span\u003e\u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/shortfills\"\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/a\u003e\u003ca title=\"High-VG E-Liquid\" href=\"https:\/\/piratevapes.co.uk\/collections\/high-vg-e-liquid\" target=\"_blank\"\u003e\u003cstrong\u003eHigh-VG E-Liquid\u003c\/strong\u003e\u003c\/a\u003e\u003cspan\u003e onto the cotton visible through the coil's mesh openings. This pre-saturates the wicking.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003ePush down on the \u003c\/span\u003e\u003cspan\u003elocking top-cap\u003c\/span\u003e\u003cspan\u003e and twist it open. The fill port appears. Pour in your e-liquid. Twist the cap back and release to lock.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eStand the tank upright for seven to eight minutes.\u003c\/span\u003e\u003cspan\u003e The 0.15 ohm mesh coil has dense cotton that absorbs slowly on the first fill. Cutting this short means a charred first draw.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eScrew the tank onto your \u003c\/span\u003e\u003cspan\u003e510 mod\u003c\/span\u003e\u003cspan\u003e. Set wattage to the low end of the coil's range. Take a gentle first pull. Increase wattage over the next few draws as the coil beds in.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eAdjust the \u003c\/span\u003e\u003cspan\u003edual bottom airflow ring\u003c\/span\u003e\u003cspan\u003e to your preferred draw tightness.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eWhat's in the SMOK TFV9 Replacement Tank Box\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eThe TFV9 tank in your chosen colour with a \u003c\/span\u003e\u003cspan\u003eV9 Mesh 0.15 ohm coil\u003c\/span\u003e\u003cspan\u003e already installed. \u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eOne replacement \u003c\/span\u003e\u003cspan\u003ePyrex bubble glass tube\u003c\/span\u003e\u003cspan\u003e. \u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eUser manual. \u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eNo mod, no battery, no e-liquid. You need a 510 mod and\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003esub-ohm shortfills\u003c\/span\u003e\u003cspan\u003e to use this tank.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eFits Any 510 Mod and Runs Two Coil Families\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe TFV9 screws onto any mod with a \u003c\/span\u003e\u003cspan\u003e510 connection\u003c\/span\u003e\u003cspan\u003e. At 28mm diameter, check your mod's width to confirm a flush fit. Most box mods handle 28mm without issue. Pen mods and compact devices may see overhang.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eTwo coil families work in this tank: \u003c\/strong\u003e\u003cspan\u003eV9 Mesh 0.15 ohm\u003c\/span\u003e\u003cspan\u003e and \u003c\/span\u003e\u003cspan\u003eV8 Baby 0.15 ohm\u003c\/span\u003e\u003cspan\u003e. Both are sub-ohm mesh coils built for DTL wattage.\u003c\/span\u003e\u003ca title=\"Replacement Coils\" href=\"https:\/\/piratevapes.co.uk\/collections\/vape-coils\" target=\"_blank\"\u003e\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eReplacement Coils\u003c\/strong\u003e\u003c\/a\u003e\u003cspan\u003e\u003cstrong\u003e \u003c\/strong\u003eare stocked across the\u003c\/span\u003e\u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/smok-vapes\"\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/a\u003e\u003ca title=\"SMOK Range\" href=\"https:\/\/piratevapes.co.uk\/collections\/smok-vapes\" target=\"_blank\"\u003e\u003cstrong\u003eSMOK Range\u003c\/strong\u003e\u003c\/a\u003e\u003cspan\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eE-liquid: \u003c\/strong\u003e\u003cspan\u003e70\/30 or higher VG\u003c\/span\u003e\u003cspan\u003e at 3 to 6mg freebase. Sub-ohm at 0.15 ohm. Do not run nic salts above 6mg through this tank.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eAbout SMOK\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eSMOK sits under\u003cstrong\u003e \u003c\/strong\u003e\u003c\/span\u003e\u003cstrong\u003eIVPS International Limited\u003c\/strong\u003e\u003cspan\u003e\u003cstrong\u003e \u003c\/strong\u003ein Shenzhen and has been producing vape hardware since before most of the brands on this page launched. The \u003c\/span\u003e\u003cspan\u003eTFV tank series\u003c\/span\u003e\u003cspan\u003e started with the \u003cstrong\u003eTFV4\u003c\/strong\u003e, went through the\u003cstrong\u003e TFV8, TFV12, TFV16, TFV18\u003c\/strong\u003e, and now the \u003cstrong\u003eTFV9 \u003c\/strong\u003ecarries the family forward in a more compact, TPD-friendly format. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eSMOK's scale means coils and replacement glass for any TFV model are available in practically every UK vape shop, which is a genuine advantage when you need parts quickly.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eStock Up and Save\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eOne coil in the box. One. Once that V9 mesh wears out, you need replacements. A five-pack of V9 coils alongside the tank covers your first month. Every tank ships \u003c\/span\u003e\u003cspan\u003eboxed with the glass section protected\u003c\/span\u003e\u003cspan\u003e to prevent breakage during delivery. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eWe check age before sending, dispatch same-day on orders before 4 pm, and track every parcel. Over 18s only. Spend £25 or more and \u003c\/span\u003e\u003cspan\u003eFree Pirate Post\u003c\/span\u003e\u003cspan\u003e takes care of shipping.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eConclusion\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe TFV9 is \u003cstrong\u003eSMOK's sub-ohm DTL tank\u003c\/strong\u003e scaled down to 2ml for the UK market. Dual bottom airflow, \u003cstrong\u003eV9 mesh coils, V8 Baby\u003c\/strong\u003e cross-compatibility, a childproof locking top-fill that actually stays locked, and eight colour options. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eAt 28mm, it is built for box mods, and it handles high-wattage\u003cstrong\u003e DTL vaping\u003c\/strong\u003e with the kind of airflow and heat management that narrower tanks struggle with. If you need a replacement sub-ohm tank with wide coil availability and a colour that matches your mod, the TFV9 covers both. Pick one up at\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003ePirate Vapes\u003c\/strong\u003e\u003cspan\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eFAQs\u003c\/span\u003e\u003c\/h2\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eWhat coils fit the TFV9?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eV9 Mesh 0.15 ohm\u003c\/span\u003e\u003cspan\u003e (designed for this tank) and \u003c\/span\u003e\u003cspan\u003eV8 Baby 0.15 ohm\u003c\/span\u003e\u003cspan\u003e (cross-compatible). Both are sub-ohm mesh coils for DTL vaping.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eDoes the TFV9 leak?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe childproof locking top-cap prevents accidental opening. Bottom airflow tanks can seep if the coil is not seated properly or the O-rings are worn. Replace O-rings periodically and make sure the coil sits straight.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eWhat e-liquid works in the TFV9?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003e70\/30 or higher VG at 3 to 6mg freebase. Sub-ohm mesh at 0.15 ohm. Nic salts above 6mg will be uncomfortably harsh.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eWill the TFV9 fit my mod?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eAny mod with a 510 thread. Check width: the TFV9 is 28mm in diameter, so compact or narrow mods may see overhang. Most box mods handle it without issue.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eDoes the TFV9 come with a spare glass?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eYes. One replacement Pyrex bubble glass tube is in the box.\u003c\/span\u003e\u003c\/p\u003e","brand":"SMOK","offers":[{"title":"Matte Black \/ Smok V9 0.15 Ohm Coils","offer_id":52534498656538,"sku":null,"price":14.95,"currency_code":"GBP","in_stock":true},{"title":"Matte Black \/ No Need","offer_id":52534498689306,"sku":null,"price":14.95,"currency_code":"GBP","in_stock":true},{"title":"Gunmetal \/ Smok V9 0.15 Ohm Coils","offer_id":52534498722074,"sku":null,"price":14.95,"currency_code":"GBP","in_stock":true},{"title":"Gunmetal \/ No Need","offer_id":52534498754842,"sku":null,"price":14.95,"currency_code":"GBP","in_stock":true},{"title":"Silver \/ Smok V9 0.15 Ohm Coils","offer_id":52534498787610,"sku":null,"price":14.95,"currency_code":"GBP","in_stock":true},{"title":"Silver \/ No Need","offer_id":52534498820378,"sku":null,"price":14.95,"currency_code":"GBP","in_stock":true},{"title":"Blue \/ Smok V9 0.15 Ohm Coils","offer_id":52534498853146,"sku":null,"price":14.95,"currency_code":"GBP","in_stock":true},{"title":"Blue \/ No Need","offer_id":52534498885914,"sku":null,"price":14.95,"currency_code":"GBP","in_stock":true},{"title":"Red \/ Smok V9 0.15 Ohm Coils","offer_id":52534498918682,"sku":null,"price":14.95,"currency_code":"GBP","in_stock":true},{"title":"Red \/ No Need","offer_id":52534498951450,"sku":null,"price":14.95,"currency_code":"GBP","in_stock":true},{"title":"Gold \/ Smok V9 0.15 Ohm Coils","offer_id":52534498984218,"sku":null,"price":14.95,"currency_code":"GBP","in_stock":true},{"title":"Gold \/ No Need","offer_id":52534499016986,"sku":null,"price":14.95,"currency_code":"GBP","in_stock":true},{"title":"Green \/ Smok V9 0.15 Ohm Coils","offer_id":52534499049754,"sku":null,"price":14.95,"currency_code":"GBP","in_stock":true},{"title":"Green \/ No Need","offer_id":52534499082522,"sku":null,"price":14.95,"currency_code":"GBP","in_stock":true},{"title":"Rainbow \/ Smok V9 0.15 Ohm Coils","offer_id":52534499115290,"sku":null,"price":14.95,"currency_code":"GBP","in_stock":true},{"title":"Rainbow \/ No Need","offer_id":52534499148058,"sku":null,"price":14.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0995\/5675\/3690\/files\/SMOK_TFV9_Replacement_Tank.jpg?v=1784270481"},{"product_id":"uwell-valyrian-3-tank","title":"Uwell Valyrian 3 Tank","description":"\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eUwell Valyrian 3 Sub-Ohm Atomiser Tank\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eSlimmer than its predecessor, tougher glass, and backward compatible with \u003cstrong\u003eValyrian II coils\u003c\/strong\u003e. The\u003cstrong\u003e Valyrian 3 \u003c\/strong\u003eis a \u003c\/span\u003e\u003cstrong\u003e27.3mm sub-ohm tank\u003c\/strong\u003e\u003cspan\u003e\u003cstrong\u003e \u003c\/strong\u003eholding \u003c\/span\u003e\u003cspan\u003e2ml under UK TPD\u003c\/span\u003e\u003cspan\u003e, built with \u003c\/span\u003e\u003cstrong\u003ePMMA glass\u003c\/strong\u003e\u003cspan\u003e\u003cstrong\u003e \u003c\/strong\u003einstead of Pyrex for better shatter resistance. Two new mesh coils ship in the box: a \u003c\/span\u003e\u003cspan\u003e0.32ohm stainless steel\u003c\/span\u003e\u003cspan\u003e at\u003cstrong\u003e 80-85W\u003c\/strong\u003e and a \u003c\/span\u003e\u003cstrong\u003e0.14ohm kanthal\u003c\/strong\u003e\u003cspan\u003e\u003cstrong\u003e \u003c\/strong\u003eat 80-90W. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eIt also accepts the older \u003cstrong\u003eValyrian II 0.15ohm and 0.16ohm\u003c\/strong\u003e heads, giving you four coil options from a single tank. \u003c\/span\u003e\u003cspan\u003e510 threaded\u003c\/span\u003e\u003cspan\u003e, button-press flip cap for filling, and a redesigned airflow system with a rotating piston dial at the base.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eWhy vapers choose this:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003ePMMA glass is significantly more shatter-resistant than Pyrex\u003c\/span\u003e\u003cspan\u003e, which matters on a tank that sits on top of high-wattage mods and gets knocked around\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eBackward compatibility with Valyrian II coils\u003c\/span\u003e\u003cspan\u003e means you are not starting from scratch if you already own spare 0.15ohm or 0.16ohm heads\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003e27.3mm diameter\u003c\/span\u003e\u003cspan\u003e is noticeably narrower than the V2 Pro's 32mm, so it sits flush on a wider range of\u003c\/span\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/vape-mods\"\u003e \u003c\/a\u003e\u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/vape-mods\" title=\"Vape Mods\" target=\"_blank\"\u003eVape Mods\u003c\/a\u003e\u003c\/strong\u003e\u003cspan\u003e\u003cstrong\u003e \u003c\/strong\u003ewithout overhang\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eButton-press flip cap\u003c\/span\u003e\u003cspan\u003e is one-touch access to the fill port, faster than the hinged design on the previous generation\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eRotating piston airflow\u003c\/span\u003e\u003cspan\u003e is a redesign from the standard ring system, giving smoother adjustment with less air turbulence\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eUwell Valyrian 3 Sub-Ohm Atomiser Tank Features\u003c\/span\u003e\u003c\/h2\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003ePMMA Over Pyrex\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003ePyrex glass works, but it cracks when it hits a hard surface. PMMA is the same material used in safety glasses and industrial screens. It absorbs impact rather than shattering, which means a drop that would crack a Pyrex tank usually leaves PMMA undamaged. Uwell made this switch between the V2 Pro and the V3, and it is a practical upgrade for anyone who carries their\u003c\/span\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/vape-tanks\"\u003e \u003c\/a\u003e\u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/vape-tanks\" title=\"Vape Tank\" target=\"_blank\"\u003eVape Tank\u003c\/a\u003e\u003c\/strong\u003e\u003cspan\u003e\u003cstrong\u003e \u003c\/strong\u003edaily.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eFour Coils, One Platform\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe tank ships with two new mesh coils: \u003c\/span\u003e\u003cspan\u003e0.32ohm stainless steel\u003c\/span\u003e\u003cspan\u003e at 80-85W and \u003c\/span\u003e\u003cspan\u003e0.14ohm kanthal\u003c\/span\u003e\u003cspan\u003e at 80-90W. But it also takes the Valyrian II's \u003c\/span\u003e\u003cspan\u003e0.15ohm\u003c\/span\u003e\u003cspan\u003e and \u003c\/span\u003e\u003cspan\u003e0.16ohm\u003c\/span\u003e\u003cspan\u003e coils. That gives you four resistance options across two generations of the Valyrian platform. If you have been using a V2 Pro and have a stash of spare coils, they work here too.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003ePiston Airflow Is a Different Feel\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eMost sub-ohm tanks adjust airflow with a rotating ring that covers or uncovers slots. The Valyrian 3 uses an internal piston instead. The dial at the base moves a piston up or down inside the tank, changing airflow volume without relying on external slots. The draw feels smoother as a result, and the adjustment is more precise than a conventional ring system.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003ePRO-FOCS Carried Forward\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eUwell kept the PRO-FOCS flavour technology from the V2 Pro. The coil housing and vapour path are shaped to maximise how much flavour reaches you at high wattage. If the V2 Pro's flavour impressed you, expect the same standard here. The technology has not changed, just the tank around it.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eButton-Press Cap Is Faster\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe V2 Pro used a hinged flip cap. The V3 uses a button-press mechanism instead. Push the button, the cap pops open, fill through the port, push it closed. It is faster, and the button gives more positive feedback than a hinge. Small improvement, but you notice it after the third or fourth refill of the day.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eUwell Valyrian 3 Sub-Ohm Atomiser Tank Colours\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eFive options in the store picker. All share the same stainless steel and PMMA glass construction:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e#buttons\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli data-section-id=\"iz1dg4\" data-start=\"78\" data-end=\"92\"\u003eIridescent\u003cspan aria-hidden=\"true\" class=\"PDq2pG_selectionAnchor\"\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli data-section-id=\"1l1v5i7\" data-start=\"93\" data-end=\"103\"\u003eSilver\u003c\/li\u003e\n\u003cli data-section-id=\"a7stb9\" data-start=\"104\" data-end=\"116\"\u003eGunmetal\u003c\/li\u003e\n\u003cli data-section-id=\"1j420ty\" data-start=\"117\" data-end=\"123\" data-is-last-node=\"\"\u003eBlue\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eHow to Set Up the Uwell Valyrian 3 Sub-Ohm Atomiser Tank\u003c\/span\u003e\u003c\/h2\u003e\n\u003col\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eUnscrew the tank base and thread one of the included mesh coils into the base section. Finger-tight only.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003ePrime the coil with \u003c\/span\u003e\u003cspan\u003efour to five drops of\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003ee-liquid\u003c\/span\u003e\u003cspan\u003e through the wicking ports and the top.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eReassemble the tank and attach it to your mod via the \u003c\/span\u003e\u003cspan\u003e510 thread\u003c\/span\u003e\u003cspan\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003ePress the \u003c\/span\u003e\u003cspan\u003eflip cap button\u003c\/span\u003e\u003cspan\u003e on top to open the fill port. Fill with\u003cstrong\u003e \u003ca title=\"High VG Freebase Liquid\" href=\"https:\/\/piratevapes.co.uk\/collections\/high-vg-e-liquid\" target=\"_blank\"\u003eHigh VG Freebase Liquid\u003c\/a\u003e\u003c\/strong\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eClose the cap and let the tank stand upright for \u003c\/span\u003e\u003cspan\u003efive to ten minutes\u003c\/span\u003e\u003cspan\u003e so the mesh fully saturates.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eStart at the \u003c\/span\u003e\u003cspan\u003elow end\u003c\/span\u003e\u003cspan\u003e of the coil's wattage range and work up over your first few draws.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eWhat's in the Uwell Valyrian 3 Sub-Ohm Atomiser Tank Box\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eOne Valyrian 3 tank in your selected colour. \u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eOne \u003c\/span\u003e\u003cspan\u003e0.32ohm stainless steel mesh coil\u003c\/span\u003e\u003cspan\u003e (80-85W). \u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eOne \u003c\/span\u003e\u003cspan\u003e0.14ohm kanthal mesh coil\u003c\/span\u003e\u003cspan\u003e (80-90W). \u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eAnd a user manual. \u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eNo spare glass is included with this version.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eWorks with Any 510 Mod and the Entire Valyrian Coil Family\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe \u003cstrong\u003eValyrian 3\u003c\/strong\u003e uses standard \u003c\/span\u003e\u003cspan\u003e510 threading\u003c\/span\u003e\u003cspan\u003e and needs a mod that reaches at least \u003c\/span\u003e\u003cspan\u003e80W\u003c\/span\u003e\u003cspan\u003e to drive the included coils. At 27.3mm diameter, it fits comfortably on most mid-range and full-size \u003c\/span\u003e\u003cspan\u003evape mods\u003c\/span\u003e\u003cspan\u003e without overhang.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe tank runs on its own two new coils plus the\u003cstrong\u003e Valyrian II \u003c\/strong\u003e\u003c\/span\u003e\u003cstrong\u003e0.15ohm \u003c\/strong\u003eand \u003cstrong\u003e0.16ohm\u003c\/strong\u003e\u003cspan\u003e\u003cstrong\u003e heads\u003c\/strong\u003e. That is four coil options in total. Other\u003c\/span\u003e\u003cstrong\u003e\u003ca title=\"Uwell Coil\" href=\"https:\/\/piratevapes.co.uk\/collections\/uwell-coils\" target=\"_blank\"\u003e Uwell Coil\u003c\/a\u003e\u003c\/strong\u003e\u003cspan\u003e\u003cstrong\u003e \u003c\/strong\u003eplatforms (Caliburn, Crown) will not fit. Only \u003cstrong\u003eValyrian-series coils\u003c\/strong\u003e work here.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eAbout Uwell\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe \u003cstrong\u003eValyrian series\u003c\/strong\u003e is where \u003cstrong\u003eUwell \u003c\/strong\u003epushes its sub-ohm engineering furthest. The original Valyrian established the coil platform. The \u003cstrong\u003eV2 Pro\u003c\/strong\u003e added \u003cstrong\u003ePRO-FOCS\u003c\/strong\u003e and self-cleaning technology. And the Valyrian 3 refines the physical design: slimmer body, stronger glass, redesigned airflow, and backward compatibility that lets existing\u003c\/span\u003e\u003ca title=\"Uwell\" href=\"https:\/\/piratevapes.co.uk\/collections\/uwell-vapes\" target=\"_blank\"\u003e\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eUwell\u003c\/strong\u003e\u003c\/a\u003e\u003cspan\u003e\u003cstrong\u003e \u003c\/strong\u003eusers upgrade without wasting their coil stock. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThree generations of iterative improvement, each one keeping the coil platform intact while improving everything around it. That kind of continuity is rare in sub-ohm tanks.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eStock Up and Save\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eTwo coils in the box, but at 80-90W they will not last more than a couple of weeks. Adding a pack of \u003cstrong\u003eValyrian 3 replacement coils\u003c\/strong\u003e to your order means you are set for a proper month of daily vaping. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eEvery order from\u003cstrong\u003e \u003c\/strong\u003e\u003c\/span\u003e\u003cstrong\u003ePirate Vapes\u003c\/strong\u003e\u003cspan\u003e\u003cstrong\u003e \u003c\/strong\u003eships same day before 4pm in protective packaging. All products TPD compliant, age-verified checkout, over-18s only. Free Pirate Post on orders over £25.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eConclusion\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe \u003cstrong\u003eValyrian 3 \u003c\/strong\u003etakes what worked on the \u003cstrong\u003eV2 Pro \u003c\/strong\u003eand trims it down: smaller diameter, shatter-resistant PMMA glass, button-press filling, piston airflow, and backward compatibility with existing Valyrian II coils. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eIf you already own a Valyrian II setup, the upgrade path is clean. If you are coming in fresh, you get a well-engineered sub-ohm tank with four coil options and strong flavour from the \u003cstrong\u003ePRO-FOCS system\u003c\/strong\u003e. Browse the full range of\u003c\/span\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/vape-accessories\"\u003e \u003c\/a\u003e\u003ca title=\"Vape Accessories\" href=\"https:\/\/piratevapes.co.uk\/collections\/vape-accessories\" target=\"_blank\"\u003eVape Accessories\u003c\/a\u003e\u003c\/strong\u003e\u003cspan\u003e at\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003ePirate Vapes\u003c\/strong\u003e\u003cspan\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eFAQs\u003c\/span\u003e\u003c\/h2\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eDoes this tank take Valyrian II coils?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eYes. The 3 is backward compatible with the Valyrian II \u003c\/span\u003e\u003cspan\u003e0.15ohm\u003c\/span\u003e\u003cspan\u003e and \u003c\/span\u003e\u003cspan\u003e0.16ohm\u003c\/span\u003e\u003cspan\u003e coils alongside its own two new coil heads.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eWhat wattage mod do I need?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003e80W minimum.\u003c\/span\u003e\u003cspan\u003e The 0.32ohm coil runs at 80-85W and the 0.14ohm at 80-90W. A single-battery mod that reaches 80W is enough. Dual-battery gives more headroom.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eIs the glass Pyrex or PMMA?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003ePMMA.\u003c\/span\u003e\u003cspan\u003e More impact-resistant than Pyrex. Less likely to shatter if you drop the tank.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eHow do I refill the tank?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003ePress the \u003c\/span\u003e\u003cspan\u003ebutton on the top cap\u003c\/span\u003e\u003cspan\u003e. The cap pops open. Fill through the exposed port. Push it closed.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eWhat e-liquid works best?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eHigh VG at 70\/30 or above\u003c\/span\u003e\u003cspan\u003e, freebase nicotine at 3mg. These coils run at 80W and up. Not suited to nic salts or thin 50\/50 blends.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eIs a spare glass included?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eNo. The Valyrian 3 box does not include a replacement glass. If you want a spare on hand, it would need to be ordered separately.\u003c\/span\u003e\u003c\/p\u003e","brand":"Uwell","offers":[{"title":"Best Colour","offer_id":52535956996378,"sku":null,"price":22.99,"currency_code":"GBP","in_stock":true},{"title":"Iridescent","offer_id":52535957029146,"sku":null,"price":22.99,"currency_code":"GBP","in_stock":true},{"title":"Silver","offer_id":52535957061914,"sku":null,"price":22.99,"currency_code":"GBP","in_stock":true},{"title":"Gunmetal","offer_id":52535957094682,"sku":null,"price":22.99,"currency_code":"GBP","in_stock":true},{"title":"Blue","offer_id":52535957127450,"sku":null,"price":22.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0995\/5675\/3690\/files\/Uwell_Valyrian_3_Tank.jpg?v=1784280629"},{"product_id":"geekvape-zeus-sub-ohm-tank","title":"Geekvape Zeus Sub Ohm Tank","description":"\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eGeekvape Zeus Sub Ohm Replacement Tank\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eTop airflow on a \u003cstrong\u003esub-ohm tank\u003c\/strong\u003e. That is the reason the Zeus became one of the most recommended \u003ca title=\"DTL Tanks\" href=\"https:\/\/piratevapes.co.uk\/collections\/dtl-tanks\" target=\"_blank\"\u003e\u003cstrong\u003eDTL Tanks\u003c\/strong\u003e\u003c\/a\u003e in UK vape retail, and it is the reason it stays there. Air enters from the top of the tank, travels down through the \u003c\/span\u003e\u003cspan\u003eKA1 mesh coil\u003c\/span\u003e\u003cspan\u003e, and exits through the mouthpiece. Gravity pulls liquid down. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eAir pulls up. They never meet at the base, which means the Zeus does not leak. \u003c\/span\u003e\u003cstrong\u003e26mm diameter\u003c\/strong\u003e\u003cspan\u003e, \u003c\/span\u003e\u003cspan\u003e2ml Pyrex under UK TPD\u003c\/span\u003e\u003cspan\u003e, two \u003c\/span\u003e\u003cstrong\u003eZ Series mesh coils\u003c\/strong\u003e\u003cspan\u003e\u003cstrong\u003e (0.4 ohm and 0.2 ohm)\u003c\/strong\u003e, \u003c\/span\u003e\u003cspan\u003equick-slide coil change\u003c\/span\u003e\u003cspan\u003e, \u003c\/span\u003e\u003cspan\u003e810 wide-bore drip tip\u003c\/span\u003e\u003cspan\u003e, \u003c\/span\u003e\u003cspan\u003e510 thread\u003c\/span\u003e\u003cspan\u003e, top fill. Seven colours stocked. Over 18s only.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eWhy vapers choose this:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eTop airflow makes leaking nearly impossible.\u003c\/span\u003e\u003cspan\u003e No bottom air slots. Sealed base. The Zeus built its reputation on this.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eQuick-slide coil change\u003c\/span\u003e\u003cspan\u003e without removing the tank from your mod. Pull old coil down, slide new one up.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eTwo Z Series KA1 mesh coils\u003c\/span\u003e\u003cspan\u003e included: 0.2 ohm for cloud, 0.4 ohm for flavour balance\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003e26mm diameter\u003c\/span\u003e\u003cspan\u003e sits flush on most box mods. Compact for a sub-ohm tank.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eSeven finishes\u003c\/span\u003e\u003cspan\u003e including Rainbow PVD. More colour options than most competing tanks.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eGeekvape Zeus Sub Ohm Replacement Tank Features\u003c\/span\u003e\u003c\/h2\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eThe Leak-Proof Claim Is Not Marketing Fluff\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe original Zeus was an RTA, and Geekvape designed it around top airflow specifically to solve leaking. The sub-ohm version carries that same airflow path forward. Air comes in from the top of the tank, passes down through the coil, and flows back up to the 810 drip tip. The base of the tank has no air intake holes at all. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eNo holes, no path for liquid to follow downward, no leaking. You can leave this tank on its side, in a bag, in a pocket. The liquid stays put. That is not a theoretical claim. It is a structural consequence of the design.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eQuick-Slide Coil Changes Take Seconds\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe Zeus uses a \u003c\/span\u003e\u003cspan\u003eplug-pull coil system\u003c\/span\u003e\u003cspan\u003e. You do not unscrew anything. You do not disassemble the tank. You grip the base of the spent coil, pull it straight down, and slide the new one up into place. The whole thing takes less time than describing it. If you have used screw-in coils before and dealt with cross-threading or stripped connections, the quick-slide system removes that problem entirely.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eTwo KA1 Mesh Coils and Both Perform Differently\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe \u003c\/span\u003e\u003cspan\u003eZ2 at 0.2 ohm\u003c\/span\u003e\u003cspan\u003e runs at 70 to 80W and produces denser vapour with a warmer draw. Good for cloud chasers who want noticeable output. The \u003c\/span\u003e\u003cspan\u003eZ1 at 0.4 ohm\u003c\/span\u003e\u003cspan\u003e runs at 60 to 70W and tilts slightly toward flavour over cloud. Cooler, more restrained, but still proper DTL. Both use KA1 (Kanthal A1) mesh, which heats quickly and holds its shape at sustained wattage. Grab\u003c\/span\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/geekvape-coils\"\u003e \u003c\/a\u003e\u003ca title=\"Replacement Z Coils\" href=\"https:\/\/piratevapes.co.uk\/collections\/geekvape-coils\" target=\"_blank\"\u003eReplacement Z Coils\u003c\/a\u003e\u003c\/strong\u003e\u003cspan\u003e when you need more.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003e810 Drip Tip Opens Up the Draw\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe \u003c\/span\u003e\u003cspan\u003ewide-bore 810 drip tip\u003c\/span\u003e\u003cspan\u003e channels more air per draw than a standard 510 tip. For DTL vaping at 60W and above, that wider bore makes a noticeable difference in how open the draw feels. The tip is removable and replaceable with any aftermarket 810 if you prefer a different shape or material.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003e26mm Diameter Keeps It Flush on Most Mods\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eAt \u003c\/span\u003e\u003cspan\u003e26mm,\u003c\/span\u003e\u003cspan\u003e the Zeus sits flush on the majority of box mods without overhang. It is narrower than the \u003cstrong\u003eSMOK TFV9 (28mm)\u003c\/strong\u003e and most other high-wattage sub-ohm tanks, which makes it a better visual match for compact dual-battery mods and a more pocketable option when the tank stays on the mod all day.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eGeekvape Zeus Sub Ohm Replacement Tank Colours\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eSeven finishes. Same internals, same glass, same coil compatibility.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e#buttons\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli data-end=\"102\" data-start=\"93\" data-section-id=\"t3dqof\"\u003eBlack\u003cspan class=\"PDq2pG_selectionAnchor\" aria-hidden=\"true\"\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"113\" data-start=\"103\" data-section-id=\"1l1v5i7\"\u003eSilver\u003c\/li\u003e\n\u003cli data-end=\"122\" data-start=\"114\" data-section-id=\"1vm4tva\"\u003eBlue\u003c\/li\u003e\n\u003cli data-end=\"135\" data-start=\"123\" data-section-id=\"a7stb9\"\u003eGunmetal\u003c\/li\u003e\n\u003cli data-end=\"143\" data-start=\"136\" data-section-id=\"179h4gr\"\u003eRed\u003c\/li\u003e\n\u003cli data-end=\"152\" data-start=\"144\" data-section-id=\"1xca97s\"\u003eGold\u003c\/li\u003e\n\u003cli data-is-last-node=\"\" data-end=\"162\" data-start=\"153\" data-section-id=\"hji6ue\"\u003eRainbow\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eHow to Set Up the Geekvape Zeus Sub Ohm Replacement Tank\u003c\/span\u003e\u003c\/h2\u003e\n\u003col\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eThe \u003c\/span\u003e\u003cspan\u003eZ2 0.2 ohm mesh coil\u003c\/span\u003e\u003cspan\u003e ships pre-installed. Tilt the tank and drip a few drops of\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003ee-liquid\u003c\/span\u003e\u003cspan\u003e into the coil's mesh openings before filling to pre-wet the cotton.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eUnscrew the \u003c\/span\u003e\u003cspan\u003ethreaded top cap\u003c\/span\u003e\u003cspan\u003e. Pour in your high-VG e-liquid. Screw the cap back on.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eLeave the tank upright for six to seven minutes.\u003c\/span\u003e\u003cspan\u003e The KA1 mesh cotton is dense. It needs the full time to saturate. Firing early means a burnt coil on the first draw.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eScrew the tank onto your \u003c\/span\u003e\u003cspan\u003e510 mod\u003c\/span\u003e\u003cspan\u003e. Set wattage to \u003c\/span\u003e\u003cspan\u003e70W\u003c\/span\u003e\u003cspan\u003e for the Z2 coil. Take a gentle first draw. Adjust up toward 80W as the coil settles.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eTwist the \u003c\/span\u003e\u003cspan\u003etop airflow ring\u003c\/span\u003e\u003cspan\u003e to set your draw tightness. Fully open for maximum DTL air. Partially closed for a tighter restricted pull.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eWhat's in the Geekvape Zeus Sub Ohm Replacement Tank Box\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eThe Zeus Sub Ohm tank in your chosen finish with a \u003c\/span\u003e\u003cspan\u003eZ2 0.2 ohm mesh coil\u003c\/span\u003e\u003cspan\u003e already fitted. \u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eOne spare \u003c\/span\u003e\u003cspan\u003eZ1 0.4 ohm mesh coil\u003c\/span\u003e\u003cspan\u003e. \u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eOne coil tool for the quick-slide system. \u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eOne replacement Pyrex glass tube. \u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eA spare parts pack with O-rings. \u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eWarranty and promotion cards. \u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eUser manual. \u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eNo mod, no liquid. You need a 510 mod and\u003c\/span\u003e\u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/70-30-shortfills\"\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/a\u003e\u003ca title=\"70\/30 E-Liquid\" href=\"https:\/\/piratevapes.co.uk\/collections\/70-30-shortfills\" target=\"_blank\"\u003e\u003cstrong\u003e70\/30 E-Liquid\u003c\/strong\u003e\u003c\/a\u003e\u003cspan\u003e\u003cstrong\u003e \u003c\/strong\u003eto use this tank.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eFits Any 510 Mod and Runs the Entire Z Coil Range\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe Zeus screws onto any \u003c\/span\u003e\u003cspan\u003e510-threaded mod\u003c\/span\u003e\u003cspan\u003e and sits flush at 26mm. The\u003cstrong\u003e \u003c\/strong\u003e\u003c\/span\u003e\u003cstrong\u003eZ coil series\u003c\/strong\u003e\u003cspan\u003e extends beyond the Z1 and Z2 included in the box. \u003cstrong\u003eGeekvape \u003c\/strong\u003eoffers additional resistances across the \u003cstrong\u003eZ platform \u003c\/strong\u003efor different wattage preferences.\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eReplacement Z coils\u003c\/strong\u003e\u003cspan\u003e\u003cstrong\u003e \u003c\/strong\u003eare widely available. Browse the full\u003c\/span\u003e\u003ca title=\"Geekvape Range\" href=\"https:\/\/piratevapes.co.uk\/collections\/geekvape-vapes\" target=\"_blank\"\u003e\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eGeekvape Range\u003c\/strong\u003e\u003c\/a\u003e\u003cspan\u003e for compatible mods and accessories.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eE-liquid: \u003c\/span\u003e\u003cspan\u003e70\/30 or higher VG\u003c\/span\u003e\u003cspan\u003e at 3 to 6mg freebase. Sub-ohm mesh coils at 60 to 80W. Do not use nic salts above 6mg. Do not run \u003cstrong\u003ehigh-PG liquids\u003c\/strong\u003e. The coils and wattage are built for thick, \u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/high-vg-e-liquid\" target=\"_blank\" title=\"High-VG Liquid\" rel=\"noopener\"\u003e\u003cstrong\u003eHigh-VG Liquid\u003c\/strong\u003e\u003c\/a\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eAbout Geekvape\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eGeekvape operates out of \u003c\/span\u003e\u003cspan\u003eShenzhen, China,\u003c\/span\u003e\u003cspan\u003e and earned its name through the \u003c\/span\u003e\u003cspan\u003eAegis series\u003c\/span\u003e\u003cspan\u003e of IP-rated rugged mods. The \u003c\/span\u003e\u003cspan\u003eZeus tank family\u003c\/span\u003e\u003cspan\u003e sits alongside the Aegis lineup as one of the brand's most recognised products: the \u003cstrong\u003eZeus RTA, the Zeus Sub Ohm, the Zeus Nano,\u003c\/strong\u003e and the \u003cstrong\u003eZ Max \u003c\/strong\u003ehave all built strong followings in the DTL market. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eGeekvape runs the B, G, and Z coil platforms across their hardware, and the\u003cstrong\u003e Z coils\u003c\/strong\u003e used in this tank are among the most widely stocked sub-ohm coils in UK retail.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eStock Up and Save\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eTwo coils in the box: one fitted, one spare. After those, you need more. Grab a \u003cstrong\u003efive-pack of Z Series coils\u003c\/strong\u003e alongside the tank, and you are covered for the first month. Every tank ships with the \u003c\/span\u003e\u003cspan\u003eglass tube cushioned inside the packaging\u003c\/span\u003e\u003cspan\u003e to prevent breakage. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eOrders go out same-day when placed by 4 pm, tracked from dispatch to doorstep. 18+ only, verified at checkout. \u003c\/span\u003e\u003cspan\u003eFree Pirate Post\u003c\/span\u003e\u003cspan\u003e on anything over £25.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eConclusion\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe\u003cstrong\u003e Zeus Sub Ohm\u003c\/strong\u003e is the sub-ohm tank that does not leak. Top airflow, sealed base, structural leak resistance. That alone makes it worth considering over every bottom-airflow tank on the market. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eAdd the quick-slide coil system, two \u003cstrong\u003eKA1 mesh coils\u003c\/strong\u003e in the box, an\u003cstrong\u003e 810 wide-bore drip tip\u003c\/strong\u003e, and seven colour options, and you have a\u003cstrong\u003e DTL tank\u003c\/strong\u003e that covers flavour and cloud at 60 to 80W without the ongoing frustration of liquid seeping through the base. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eIf you want a 510 sub-ohm tank that you can trust to stay dry, the Zeus has been proving it for years. Pick one up at\u003c\/span\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/piratevapes.co.uk\" target=\"_blank\" title=\"Pirate Vapes\" rel=\"noopener\"\u003e Pirate Vapes\u003c\/a\u003e\u003c\/strong\u003e\u003cspan\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eFAQs\u003c\/span\u003e\u003c\/h2\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eDoes the Zeus Sub Ohm tank leak?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eNo. Top airflow, sealed base. Air enters from the top and never passes through the bottom of the tank. Leaking from the base is structurally prevented.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eWhat coils does the Zeus Sub Ohm use?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eZ Series mesh coils.\u003c\/span\u003e\u003cspan\u003e Z1 at 0.4 ohm (60-70W) and Z2 at 0.2 ohm (70-80W) are included. Additional Z coil resistances are available separately.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eWhat mods fit the Zeus Sub Ohm tank?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eAny \u003c\/span\u003e\u003cspan\u003e510-threaded mod\u003c\/span\u003e\u003cspan\u003e. The 26mm diameter sits flush on most box mods.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eWhat e-liquid works in the Zeus Sub Ohm?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003e70\/30 or higher VG at 3 to 6mg freebase. Sub-ohm mesh at 60 to 80W. Nic salts above 6mg will be too harsh at these wattages.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eHow do I change the coil in the Zeus Sub Ohm?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eQuick-slide system. Pull the old coil straight down from the base. Slide the new one up until it clicks. No screwing, no tank disassembly needed.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eIs the Zeus Sub Ohm the same as the Zeus RTA?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eNo. The Zeus Sub Ohm uses pre-built Z mesh coils. The Zeus RTA is a rebuildable tank where you build and install your own coils. Both share the same top-airflow leak-proof design.\u003c\/span\u003e\u003c\/p\u003e","brand":"Geekvape","offers":[{"title":"Black","offer_id":52536002380058,"sku":null,"price":18.99,"currency_code":"GBP","in_stock":true},{"title":"Silver","offer_id":52536002412826,"sku":null,"price":18.99,"currency_code":"GBP","in_stock":true},{"title":"Blue","offer_id":52536002445594,"sku":null,"price":18.99,"currency_code":"GBP","in_stock":true},{"title":"Gunmetal","offer_id":52536002478362,"sku":null,"price":18.99,"currency_code":"GBP","in_stock":true},{"title":"Red","offer_id":52536002511130,"sku":null,"price":18.99,"currency_code":"GBP","in_stock":true},{"title":"Gold","offer_id":52536002543898,"sku":null,"price":18.99,"currency_code":"GBP","in_stock":true},{"title":"Rainbow","offer_id":52536002576666,"sku":null,"price":18.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0995\/5675\/3690\/files\/Geekvape_Zeus_Sub_Ohm_Tank.jpg?v=1784280696"},{"product_id":"smok-tfv18-sub-ohm-tank","title":"Smok TFV18 Sub-Ohm Tank | Replacement Tank","description":"\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eTFV18 Smok Sub-Ohm Tank\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThirty-two millimetres wide. That is not a typo. The \u003cstrong\u003eTFV18 \u003c\/strong\u003eis \u003cstrong\u003eSMOK's\u003c\/strong\u003e widest sub-ohm tank and it is built for one thing: \u003c\/span\u003e\u003cspan\u003ehigh-wattage cloud production at 80 to 140W\u003c\/span\u003e\u003cspan\u003e. Two \u003c\/span\u003e\u003cspan\u003eTFV18 mesh coils\u003c\/span\u003e\u003cspan\u003e in the box, a \u003cstrong\u003e0.33 ohm single mesh\u003c\/strong\u003e and a\u003cstrong\u003e 0.15 ohm dual mesh\u003c\/strong\u003e, both rated for the same wattage range but performing differently at opposite ends of it. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003e304 stainless steel construction\u003c\/span\u003e\u003cspan\u003e, \u003c\/span\u003e\u003cspan\u003ePyrex glass\u003c\/span\u003e\u003cspan\u003e, \u003c\/span\u003e\u003cspan\u003epress-and-slide top fill\u003c\/span\u003e\u003cspan\u003e, \u003c\/span\u003e\u003cspan\u003edual slotted bottom airflow\u003c\/span\u003e\u003cspan\u003e, \u003c\/span\u003e\u003cspan\u003epress-fit coil installation\u003c\/span\u003e\u003cspan\u003e, \u003c\/span\u003e\u003cspan\u003e510 thread\u003c\/span\u003e\u003cspan\u003e. \u003c\/span\u003e\u003cspan\u003e2ml under UK TPD\u003c\/span\u003e\u003cspan\u003e. If your mod pushes triple-digit wattage and you want a tank that can keep up, this is the one \u003cstrong\u003eSMOK built\u003c\/strong\u003e for that purpose. Over 18s only.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eWhy vapers choose this:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003e80 to 140W output range\u003c\/span\u003e\u003cspan\u003e across both TFV18 mesh coils. This tank is built for high-wattage mods.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003e32mm diameter\u003c\/span\u003e\u003cspan\u003e with massive dual bottom airflow slots. Maximum air intake for cloud-focused DTL draws.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003e304 stainless steel\u003c\/span\u003e\u003cspan\u003e body. Higher grade than the standard stainless used in most tanks.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003ePress-fit coil installation.\u003c\/span\u003e\u003cspan\u003e Push the coil in, pull it out. No threading, no cross-threading.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003ePress-and-slide top fill\u003c\/span\u003e\u003cspan\u003e for quick, mess-free refills without removing the tank from your mod.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eTFV18 Smok Sub-Ohm Tank Features\u003c\/span\u003e\u003c\/h2\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003e32mm Is Wide Enough to Matter\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eAt \u003c\/span\u003e\u003cspan\u003e32mm\u003c\/span\u003e\u003cspan\u003e the TFV18 is wider than the TFV9 (28mm), wider than the Zeus Sub Ohm (26mm), and wider than almost every other sub-ohm tank in current production. That width is not cosmetic. It creates room for the dual bottom airflow slots to move a serious volume of air through the coil on each draw. If you have ever felt like a 26 or 28mm tank restricts your draw at high wattage, the TFV18 removes that bottleneck entirely. The trade-off is overhang on narrower mods. Pair it with a wide box mod that can handle the diameter.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eTwo Coils, Same Wattage Band, Different Priorities\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe \u003c\/span\u003e\u003cspan\u003e0.15 ohm dual mesh\u003c\/span\u003e\u003cspan\u003e fires through two layered mesh surfaces simultaneously. More mesh contact, more vapour, more heat. It is the cloud coil. The \u003c\/span\u003e\u003cspan\u003e0.33 ohm single mesh\u003c\/span\u003e\u003cspan\u003e fires through one mesh surface at the same wattage range but with less thermal mass, which produces a slightly cooler, cleaner draw with better flavour resolution. If you care about distinguishing individual notes in a complex\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003eshortfill\u003c\/span\u003e\u003cspan\u003e, try the 0.33. If you want maximum cloud density, the 0.15 dual mesh delivers.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003ePress-Fit Coils Remove an Old Problem\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eScrew-in coils have threads. Threads wear out, strip, cross-thread, and get stuck. The \u003cstrong\u003eTFV18 \u003c\/strong\u003euses a \u003c\/span\u003e\u003cspan\u003epress-fit system\u003c\/span\u003e\u003cspan\u003e instead. Push the coil into the base. It seats itself. Pull it out when it is spent. The seal comes from the O-rings, not from threading. Faster changes, fewer failures, and no risk of the coil sitting crooked because you threaded it at a slight angle. Browse\u003c\/span\u003e\u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/smok-coils\"\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/a\u003e\u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/smok-coils\" target=\"_blank\" title=\"SMOK Replacement Coils\" rel=\"noopener\"\u003e\u003cstrong\u003eSMOK Replacement Coils\u003c\/strong\u003e\u003c\/a\u003e\u003cspan\u003e for spare \u003cstrong\u003eTFV18 mesh coils\u003c\/strong\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eThe Top Fill Stays Shut Until You Mean to Open It\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003ePress and slide.\u003c\/span\u003e\u003cspan\u003e You push down on the top cap and slide it to the side to reveal the fill port. It requires deliberate pressure, which means the cap does not shift open accidentally in a bag, a pocket, or on a desk. Fill with your\u003c\/span\u003e\u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/70-30-shortfills\"\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/a\u003e\u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/70-30-shortfills\" target=\"_blank\" title=\"70\/30 E-Liquid\" rel=\"noopener\"\u003e\u003cstrong\u003e70\/30 E-Liquid\u003c\/strong\u003e\u003c\/a\u003e\u003cspan\u003e\u003cstrong\u003e,\u003c\/strong\u003e slide the cap back, and the seal closes. No loose swivel caps, no accidental leaks from a top fill that opened itself.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003e304 Stainless Steel Is Not the Same as Standard Stainless\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eSMOK specifies \u003c\/span\u003e\u003cspan\u003e304 grade stainless steel\u003c\/span\u003e\u003cspan\u003e for the TFV18 body. 304 is a higher chromium and nickel content alloy that resists corrosion better, holds up to heat better, and maintains its finish longer than cheaper stainless grades. At 80 to 140W the tank generates real heat during extended sessions. The higher-grade steel handles that thermal cycling without warping, pitting, or developing the dull patchy finish that cheaper tanks pick up after a few months of heavy use.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eTFV18 Smok Sub-Ohm Tank Colours\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eSix finishes. Check the\u003c\/span\u003e\u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/smok-vapes\" target=\"_blank\" title=\"SMOK Range\" rel=\"noopener\"\u003e\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eSMOK Range\u003c\/strong\u003e\u003c\/a\u003e\u003cspan\u003e for current availability in other colours.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e#buttons\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli data-section-id=\"ioxona\" data-start=\"109\" data-end=\"124\"\u003eMatte Black\u003cspan aria-hidden=\"true\" class=\"PDq2pG_selectionAnchor\"\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli data-section-id=\"4dldyj\" data-start=\"125\" data-end=\"144\"\u003eStainless Steel\u003c\/li\u003e\n\u003cli data-section-id=\"1xca97s\" data-start=\"145\" data-end=\"153\"\u003eGold\u003c\/li\u003e\n\u003cli data-section-id=\"179h4gr\" data-start=\"154\" data-end=\"161\"\u003eRed\u003c\/li\u003e\n\u003cli data-section-id=\"1vm4tva\" data-start=\"162\" data-end=\"170\"\u003eBlue\u003c\/li\u003e\n\u003cli data-section-id=\"1av9rdh\" data-start=\"171\" data-end=\"191\" data-is-last-node=\"\"\u003e7-Colour (Rainbow)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eHow to Set Up the TFV18 Smok Sub-Ohm Tank\u003c\/span\u003e\u003c\/h2\u003e\n\u003col\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eThe \u003c\/span\u003e\u003cspan\u003e0.15 ohm dual mesh coil\u003c\/span\u003e\u003cspan\u003e ships pre-installed. Before filling, angle the tank and drip several drops of e-liquid onto the cotton visible through the coil's mesh openings. At 100W and above, dry cotton chars instantly.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003ePress down on the \u003c\/span\u003e\u003cspan\u003etop cap\u003c\/span\u003e\u003cspan\u003e and slide it open. The fill port appears. Pour in high-VG e-liquid. Slide the cap shut.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eLeave the tank upright for eight to ten minutes.\u003c\/span\u003e\u003cspan\u003e TFV18 mesh coils have dense cotton that absorbs slowly on the first fill. This is a high-wattage tank. Cutting the soak time short at these power levels means a ruined coil on the first draw.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eScrew the tank onto your \u003c\/span\u003e\u003cspan\u003e510 mod\u003c\/span\u003e\u003cspan\u003e. Set wattage to \u003c\/span\u003e\u003cspan\u003e90W\u003c\/span\u003e\u003cspan\u003e. Take a gentle first pull. Work up toward 100 to 110W over the next few draws.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eAdjust the \u003c\/span\u003e\u003cspan\u003edual bottom airflow ring\u003c\/span\u003e\u003cspan\u003e for your preferred openness.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eWhat's in the TFV18 Smok Sub-Ohm Tank Box\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eThe TFV18 tank with a \u003c\/span\u003e\u003cspan\u003e0.15 ohm dual meshed coil\u003c\/span\u003e\u003cspan\u003e pre-installed. \u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eOne spare \u003c\/span\u003e\u003cspan\u003e0.33 ohm meshed coil\u003c\/span\u003e\u003cspan\u003e. \u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eOne replacement \u003c\/span\u003e\u003cspan\u003ePyrex glass tube\u003c\/span\u003e\u003cspan\u003e. \u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eSpare parts pack with O-rings. \u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eUser manual. \u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eNo mod, no battery, no liquid. You need a high-wattage 510 mod and sub-ohm e-liquid to run this tank.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eBuilt for High-Wattage Box Mods With 510 Threads\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe TFV18 screws onto any \u003c\/span\u003e\u003cspan\u003e510-threaded mod\u003c\/span\u003e\u003cspan\u003e but it is realistically designed for dual or triple-battery mods that can sustain 80W and above. Single-battery mods will run it but drain fast. At \u003c\/span\u003e\u003cspan\u003e32mm diameter\u003c\/span\u003e\u003cspan\u003e, verify your mod handles the width. Most full-size box mods accept 32mm. Compact or narrow mods will see significant overhang.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe TFV18 uses its own \u003c\/span\u003e\u003cspan\u003eTFV18 mesh coil family\u003c\/span\u003e\u003cspan\u003e. The 0.33 ohm and 0.15 ohm included are the core options.\u003c\/span\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/vape-coils\"\u003e \u003c\/a\u003e\u003ca href=\"https:\/\/piratevapes.co.uk\/products\/smok-tfv18-replacement-coils\" target=\"_blank\" title=\"Replacement TFV18 Coils\" rel=\"noopener\"\u003eReplacement TFV18 Coils\u003c\/a\u003e\u003c\/strong\u003e\u003cspan\u003e are stocked separately.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003e\u003cstrong\u003eE-liquid:\u003c\/strong\u003e \u003c\/span\u003e\u003cspan\u003e70\/30 or higher VG\u003c\/span\u003e\u003cspan\u003e at 3mg freebase. At 100W plus, 6mg freebase may feel harsh. Sub-ohm mesh at these wattages. Do not use nic salts. Do not use high-PG liquids.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eAbout SMOK\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eSMOK operates under \u003c\/span\u003e\u003cspan\u003eIVPS International\u003c\/span\u003e\u003cspan\u003e out of Shenzhen and has been making tanks since before most vape brands existed. The \u003c\/span\u003e\u003cspan\u003eTFV series\u003c\/span\u003e\u003cspan\u003e (Tank For Vaping) started with the TFV4 and has run through the TFV8, TFV9, TFV12, TFV16, and now the TFV18. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eEach generation has pushed the diameter, airflow, and wattage ceiling higher. The TFV18 represents the current upper end of that line. Coils and replacement glass remain widely available across UK vape retail.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eStock Up and Save\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eTwo coils in the box, but at 80 to 140W they do not last as long as lower-wattage coils. Grab a spare pack of TFV18 coils alongside the tank through our\u003c\/span\u003e\u003cstrong\u003e Multi-Buy Options\u003c\/strong\u003e\u003cspan\u003e\u003cstrong\u003e \u003c\/strong\u003efor a lower per-coil cost. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eEvery tank leaves our warehouse \u003c\/span\u003e\u003cspan\u003eboxed with the glass tube cushioned separately\u003c\/span\u003e\u003cspan\u003e to survive transit. Same-day dispatch before 4pm, tracked throughout, age confirmed before anything ships. 18+ only. Hit £25 and \u003c\/span\u003e\u003cspan\u003eFree Pirate Post\u003c\/span\u003e\u003cspan\u003e covers delivery.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eConclusion\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe \u003cstrong\u003eTFV18 \u003c\/strong\u003eis the biggest sub-ohm tank \u003cstrong\u003eSMOK \u003c\/strong\u003emakes. 32mm wide, 304 stainless steel, dual mesh coils rated for \u003cstrong\u003e80 to 140W\u003c\/strong\u003e, press-fit installation, and dual bottom airflow that moves more air than anything smaller. It is not a beginner tank. It is not a compact option. It is a cloud tank for high-wattage mods, and it does that job without compromise. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eIf your mod pushes 100W comfortably and you want a tank that can actually use that power, the \u003cstrong\u003eTFV18 \u003c\/strong\u003eis purpose-built for it. Pick one up at\u003c\/span\u003e\u003cstrong\u003e Pirate Vapes\u003c\/strong\u003e\u003cspan\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eFAQs\u003c\/span\u003e\u003c\/h2\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eWhat wattage should I run the TFV18 at?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eBoth coils are rated \u003c\/span\u003e\u003cspan\u003e80 to 140W\u003c\/span\u003e\u003cspan\u003e with a sweet spot at \u003c\/span\u003e\u003cspan\u003e100 to 110W\u003c\/span\u003e\u003cspan\u003e. Start at 90W and work up. Below 80W the coils do not heat properly.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eWhat coils does the TFV18 use?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eIts own \u003c\/span\u003e\u003cspan\u003eTFV18 mesh coils\u003c\/span\u003e\u003cspan\u003e. 0.33 ohm single mesh and 0.15 ohm dual mesh. These are not the same as TFV9, TFV16, or TFV8 coils.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eWill the TFV18 fit my mod?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eAny 510 mod, but check width. \u003c\/span\u003e\u003cspan\u003e32mm\u003c\/span\u003e\u003cspan\u003e is wide. Most full-size box mods handle it. Compact mods will see overhang.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eWhat e-liquid works in the TFV18?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003e70\/30 or higher VG at 3mg freebase. At 100W+, even 6mg can feel harsh. Nic salts and high-PG liquids are not suitable.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eIs the TFV18 bigger than the TFV9?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eYes. \u003c\/span\u003e\u003cspan\u003e32mm vs 28mm diameter.\u003c\/span\u003e\u003cspan\u003e The TFV18 also runs at higher wattage (80-140W vs the TFV9's lower range) and uses a different coil family.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eDoes the TFV18 come with spare glass?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eYes. One replacement Pyrex glass tube is included in the box alongside the spare coil and O-ring set.\u003c\/span\u003e\u003c\/p\u003e","brand":"SMOK","offers":[{"title":"Matte Black","offer_id":52537069207834,"sku":null,"price":22.99,"currency_code":"GBP","in_stock":true},{"title":"Stainless Steel","offer_id":52537069240602,"sku":null,"price":22.99,"currency_code":"GBP","in_stock":true},{"title":"Gold","offer_id":52537069273370,"sku":null,"price":22.99,"currency_code":"GBP","in_stock":true},{"title":"Red","offer_id":52537069306138,"sku":null,"price":22.99,"currency_code":"GBP","in_stock":true},{"title":"Blue","offer_id":52537069338906,"sku":null,"price":22.99,"currency_code":"GBP","in_stock":true},{"title":"7-Colour (Rainbow)","offer_id":52537069371674,"sku":null,"price":22.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0995\/5675\/3690\/files\/Smok_TFV18_Sub-Ohm_Tank.jpg?v=1784280536"},{"product_id":"voopoo-pnp-pod-tank","title":"Voopoo PNP Pod Replacement Tank","description":"\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eVooPoo PnP Pod Tank\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eHalf pod, half tank, fully 510-threaded. The \u003cstrong\u003ePnP Pod Tank \u003c\/strong\u003etakes everything VooPoo built into the \u003cstrong\u003ePnP coil platform \u003c\/strong\u003eand puts it inside a \u003c\/span\u003e\u003cspan\u003e26mm tank body\u003c\/span\u003e\u003cspan\u003e that screws onto any mod. Same \u003c\/span\u003e\u003cstrong\u003ePnP coils\u003c\/strong\u003e\u003cspan\u003e that run in the \u003cstrong\u003eDrag X, Drag S, \u003c\/strong\u003eand \u003cstrong\u003eDrag 3.\u003c\/strong\u003e Same mesh options. Same coil stock. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eBut instead of clicking into a pod device, this tank sits on a 510 connection like a traditional sub-ohm tank. \u003c\/span\u003e\u003cspan\u003e2ml capacity\u003c\/span\u003e\u003cspan\u003e, \u003c\/span\u003e\u003cspan\u003edual adjustable bottom airflow\u003c\/span\u003e\u003cspan\u003e, \u003c\/span\u003e\u003cspan\u003ebottom-fill\u003c\/span\u003e\u003cspan\u003e, two \u003c\/span\u003e\u003cspan\u003emesh coils\u003c\/span\u003e\u003cspan\u003e in the box \u003cstrong\u003e(0.3 ohm VM1 and 0.15 ohm VM5)\u003c\/strong\u003e, stainless steel and \u003cstrong\u003ePCTG \u003c\/strong\u003econstruction. Two colours: \u003c\/span\u003e\u003cspan\u003eBlack\u003c\/span\u003e\u003cspan\u003e and \u003c\/span\u003e\u003cspan\u003eSilver\u003c\/span\u003e\u003cspan\u003e. Over 18s only.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eWhy vapers choose this:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003ePnP coils on a 510 mod.\u003c\/span\u003e\u003cspan\u003e Use VooPoo's pod coils in a traditional tank format for the first time.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eCross-compatible coil stock\u003c\/span\u003e\u003cspan\u003e with the Drag X, Drag S, Drag 3, Vinci, and every PnP-compatible device\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003e26mm diameter\u003c\/span\u003e\u003cspan\u003e sits flush on most box mods. Compact for a sub-ohm tank.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eMTL and DTL\u003c\/span\u003e\u003cspan\u003e from one tank. The VM1 at 0.3 ohm handles restricted draws. The VM5 at 0.15 ohm opens into full DTL.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eTwo mesh coils included\u003c\/span\u003e\u003cspan\u003e with different resistances. Try both draw styles from the box.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eVooPoo PnP Pod Tank Features\u003c\/span\u003e\u003c\/h2\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003ePnP Coils on a 510 Thread Is the Whole Point\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eVooPoo designed the PnP coil system for their pod kits. The Drag X, Drag S, Drag 3, and Vinci all use PnP coils in pod cartridges. The PnP Pod Tank takes those same coils and puts them inside a 510-threaded tank body instead. Why does that matter? Because it means any mod you own becomes a PnP device. You are no longer limited to VooPoo's pod kits to use PnP coils. Screw this tank onto a Geekvape mod, a SMOK mod, a Vaporesso mod. The coils do not care what device they sit on.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eBottom Fill Is Unusual, and There Is a Reason for It\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eMost modern tanks fill from the top. The PnP Pod Tank fills from the bottom. You unscrew the base, pour in your\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003ee-liquid\u003c\/span\u003e\u003cspan\u003e, and screw the base back on. It is slightly less convenient than a top-fill, but the design keeps the top of the tank clean and allows VooPoo to maintain the same internal geometry as the PnP pod cartridge. The coil sits in the same position, the airflow routes through the same path, and the flavour output matches what you would get from a Drag pod. That consistency is the trade-off for bottom filling.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eThe VM1 and VM5 Cover Both Ends of the Draw Spectrum\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe \u003c\/span\u003e\u003cspan\u003eVM1 at 0.3 ohm\u003c\/span\u003e\u003cspan\u003e runs at lower wattage with a tighter, more restricted draw. Good for flavour-focused DTL vaping or a loose MTL pull with\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003enic salts\u003c\/span\u003e\u003cspan\u003e at 10mg. The \u003c\/span\u003e\u003cspan\u003eVM5 at 0.15 ohm\u003c\/span\u003e\u003cspan\u003e pushes harder for denser cloud production and a wider open draw. Both are mesh. Both deliver clean flavour. The VM1 lasts longer per coil because of the lower power draw. The VM5 goes through liquid faster but produces noticeably more vapour.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003e26mm and PCTG Keeps the Weight Down\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe tank body combines \u003c\/span\u003e\u003cspan\u003estainless steel\u003c\/span\u003e\u003cspan\u003e with \u003c\/span\u003e\u003cspan\u003ePCTG plastic\u003c\/span\u003e\u003cspan\u003e, which makes it lighter than an all-steel tank of the same size. At \u003c\/span\u003e\u003cspan\u003e26mm,\u003c\/span\u003e\u003cspan\u003e it matches the width of the Geekvape Zeus Sub Ohm and sits flush on most box mods. The PCTG section is transparent enough to check liquid level, and the material does not crack from contact with acidic or citrus-based e-liquids the way some glass alternatives can.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eOne Coil Platform Across Pods and Tanks\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eOwn a Drag X for portable use and want the same coils in a home setup on a bigger mod? The PnP Pod Tank solves that. Your PnP coil stock works in both. No buying two different coil families for two different devices. Browse\u003c\/span\u003e\u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/voopoo-coils\"\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/a\u003e\u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/voopoo-coils\" target=\"_blank\" title=\"VooPoo PnP Coils\" rel=\"noopener\"\u003e\u003cstrong\u003eVooPoo PnP Coils\u003c\/strong\u003e\u003c\/a\u003e\u003cspan\u003e for the full resistance range beyond the VM1 and VM5 included in the box.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eVooPoo PnP Pod Tank Colours\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eTwo finishes. Same internals, same coil fit.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003e#buttons\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\"\u003eBlack\u003c\/li\u003e\n\u003cli dir=\"ltr\"\u003eSilver\u003cspan\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eHow to Set Up the VooPoo PnP Pod Tank\u003c\/span\u003e\u003c\/h2\u003e\n\u003col\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eUnscrew the base\u003c\/span\u003e\u003cspan\u003e of the tank. The PnP-VM5 0.15 ohm coil may already be fitted. If not, push the coil into the base until it clicks.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003ePrime the coil.\u003c\/span\u003e\u003cspan\u003e Drip a few drops of e-liquid onto the cotton visible through the mesh openings. This pre-wets the cotton before filling.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eFill through the base.\u003c\/span\u003e\u003cspan\u003e With the base unscrewed, pour your\u003c\/span\u003e\u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/70-30-shortfills\"\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/a\u003e\u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/70-30-shortfills\" target=\"_blank\" title=\"70\/30 E-Liquid\" rel=\"noopener\"\u003e\u003cstrong\u003e70\/30 E-Liquid\u003c\/strong\u003e\u003c\/a\u003e\u003cspan\u003e into the tank from the bottom opening. Screw the base back on tightly.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eStand the tank upright for five minutes.\u003c\/span\u003e\u003cspan\u003e The mesh coil needs time to soak. Firing before saturation means a burnt coil on draw one.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eScrew the tank onto your \u003c\/span\u003e\u003cspan\u003e510 mod\u003c\/span\u003e\u003cspan\u003e. Set wattage to suit the coil (start low, work up). Adjust the dual bottom airflow ring to your preferred tightness.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eWhat's in the VooPoo PnP Pod Tank Box\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eThe PnP Pod Tank in your chosen finish. \u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eOne PnP-VM1 0.3 ohm mesh coil. \u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eOne PnP-VM5 0.15 ohm mesh coil (may be pre-installed). \u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eA bag of spare O-rings and parts. \u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eNo mod, no battery, no e-liquid. You need a 510 mod and\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003ecompatible liquid\u003c\/span\u003e\u003cspan\u003e to use this tank.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eRuns the Entire PnP Coil Range on Any 510 Mod\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe PnP Pod Tank accepts every coil in VooPoo's \u003c\/span\u003e\u003cspan\u003ePnP range\u003c\/span\u003e\u003cspan\u003e, not just the VM1 and VM5. That includes MTL coils, RDL coils, ceramic options, and higher-resistance variants.\u003c\/span\u003e\u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/vape-coils\"\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/a\u003e\u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/voopoo-pnp-coils\" target=\"_blank\" title=\"Replacement PnP Coils\" rel=\"noopener\"\u003e\u003cstrong\u003eReplacement PnP Coils\u003c\/strong\u003e\u003c\/a\u003e\u003cspan\u003e are among the most widely stocked coil options in UK retail.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe tank screws onto any \u003c\/span\u003e\u003cspan\u003e510-threaded mod\u003c\/span\u003e\u003cspan\u003e. At 26mm diameter, it fits most devices without overhang. Compatible with but not limited to the \u003c\/span\u003e\u003cspan\u003eDrag X, Drag S, Drag 3\u003c\/span\u003e\u003cspan\u003e, and any other mod with a 510 connection. Browse the\u003c\/span\u003e\u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/voopoo-vapes\"\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/a\u003e\u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/voopoo-vapes\" target=\"_blank\" title=\"VooPoo Range\" rel=\"noopener\"\u003e\u003cstrong\u003eVooPoo Range\u003c\/strong\u003e\u003c\/a\u003e\u003cspan\u003e for compatible devices.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003e\u003cstrong\u003eE-liquid:\u003c\/strong\u003e \u003c\/span\u003e\u003cspan\u003e50\/50 or 70\/30 VG\/PG\u003c\/span\u003e\u003cspan\u003e depending on coil. The VM5 at 0.15 ohm handles 70\/30 at 3 to 6mg freebase. The VM1 at 0.3 ohm works with 50\/50 at 6 to 10mg or nic salts at 10mg. Avoid 20mg nic salts through the VM5.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eAbout VooPoo\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eVooPoo sits in \u003c\/span\u003e\u003cspan\u003eShenzhen, China,\u003c\/span\u003e\u003cspan\u003e and launched the Drag series in 2017. The \u003c\/span\u003e\u003cspan\u003eGENE chip\u003c\/span\u003e\u003cspan\u003e powers their regulated mods, the \u003c\/span\u003e\u003cspan\u003eTPP coil platform\u003c\/span\u003e\u003cspan\u003e runs their high-wattage tanks, and the \u003c\/span\u003e\u003cspan\u003ePnP coil platform\u003c\/span\u003e\u003cspan\u003e covers everything from pod kits to this 510 tank.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe PnP system is one of the widest coil ecosystems in vaping: one coil format across pods, tanks, and multiple device generations. That kind of backward and forward compatibility is VooPoo's main structural advantage over competing brands.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eStock Up and Save\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eTwo coils in the box. Once those wear down, \u003c\/span\u003e\u003cspan\u003egrab a \u003cstrong\u003efive-pack\u003c\/strong\u003e\u003c\/span\u003e\u003cspan\u003e\u003cstrong\u003e of PnP coils\u003c\/strong\u003e in your preferred resistance, and you are set for over a month. Every tank ships \u003c\/span\u003e\u003cspan\u003esealed in its original \u003cstrong\u003eVooPoo packaging\u003c\/strong\u003e\u003c\/span\u003e\u003cspan\u003e with the glass and coils protected inside. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eWe dispatch before 4 pm on weekdays, tracked all the way, 18+ verified. Over £25 unlocks \u003c\/span\u003e\u003cspan\u003eFree Pirate Post\u003c\/span\u003e\u003cspan\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eConclusion\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe \u003cstrong\u003ePnP Pod Tank \u003c\/strong\u003eis a \u003cstrong\u003e510 tank \u003c\/strong\u003ethat runs pod coils. That single concept is the reason it exists and the reason it works. PnP coils on any mod. One coil stock across your pod kit and your box mod. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eMTL and DTL from the same tank depending on your coil choice. If you are already inside \u003cstrong\u003eVooPoo's PnP ecosystem \u003c\/strong\u003eand want a 510 option, or if you own a \u003cstrong\u003enon-VooPoo mod \u003c\/strong\u003eand want access to \u003cstrong\u003ePnP coils\u003c\/strong\u003e, this tank bridges the gap. Pick one up at\u003c\/span\u003e\u003cstrong\u003e Pirate Vapes\u003c\/strong\u003e\u003cspan\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eFAQs\u003c\/span\u003e\u003c\/h2\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eCan I use PnP coils from my Drag pod in this tank?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eYes. The PnP Pod Tank accepts every coil in the PnP range. Your existing coils from the Drag X, Drag S, Drag 3, or Vinci fit directly.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eIs the PnP Pod Tank top-fill or bottom-fill?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eBottom fill.\u003c\/span\u003e\u003cspan\u003e Unscrew the base, pour in liquid, screw back on. Less convenient than top-fill but maintains the same coil geometry as the PnP pod cartridge.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eWhat mods does the PnP Pod Tank fit?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eAny \u003c\/span\u003e\u003cspan\u003e510-threaded mod\u003c\/span\u003e\u003cspan\u003e. The 26mm diameter sits flush on most box mods.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eWhat e-liquid works best?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eVM5 (0.15 ohm): 70\/30 VG\/PG at 3 to 6mg freebase. VM1 (0.3 ohm): 50\/50 at 6 to 10mg or nic salts at 10mg. Avoid 20mg salt through the VM5.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eHow many colours does the PnP Pod Tank come in?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eTwo: \u003c\/span\u003e\u003cspan\u003eBlack\u003c\/span\u003e\u003cspan\u003e and \u003c\/span\u003e\u003cspan\u003eSilver\u003c\/span\u003e\u003cspan\u003e.\u003c\/span\u003e\u003c\/p\u003e","brand":"VooPoo","offers":[{"title":"Black","offer_id":52537114820890,"sku":null,"price":14.99,"currency_code":"GBP","in_stock":true},{"title":"Silver","offer_id":52537114853658,"sku":null,"price":14.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0995\/5675\/3690\/files\/Voopoo_PNP_Pod_Replacement_Tank.jpg?v=1784282023"},{"product_id":"voopoo-maat-tank","title":"Voopoo MAAT Replacement Tank","description":"\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eVoopoo MAAT Replacement Tank\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eTwenty-six millimetres wide, built from stainless steel and Pyrex, and designed around \u003cstrong\u003eVoopoo's Volcano\u003c\/strong\u003e Crater airflow system. The \u003c\/span\u003e\u003cspan\u003eMAAT Tank\u003c\/span\u003e\u003cspan\u003e is a \u003c\/span\u003e\u003cspan\u003e2ml TPD-compliant s\u003cstrong\u003eub-ohm tank\u003c\/strong\u003e\u003c\/span\u003e\u003cspan\u003e with a \u003c\/span\u003e\u003cspan\u003e510 base\u003c\/span\u003e\u003cspan\u003e that fits most regulated\u003c\/span\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/vape-mods\" title=\"Vape Mods\" target=\"_blank\"\u003e Vape Mods\u003c\/a\u003e\u003c\/strong\u003e\u003cspan\u003e on the market. Two \u003c\/span\u003e\u003cspan\u003eTPP mesh coils\u003c\/span\u003e\u003cspan\u003e come in the box: a \u003c\/span\u003e\u003cstrong\u003e0.2ohm TPP-DM2\u003c\/strong\u003e\u003cspan\u003e for 40-60W and a \u003c\/span\u003e\u003cstrong\u003e0.15ohm TPP-DM3\u003c\/strong\u003e\u003cspan\u003e for 80-100W. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eTop-fill screw cap, adjustable airflow, replaceable glass section, and an \u003c\/span\u003e\u003cspan\u003e810 wide-bore drip tip\u003c\/span\u003e\u003cspan\u003e for open DTL draws. If you run any device with a 510 thread and want a\u003c\/span\u003e\u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/dtl-tanks\" title=\"DTL Tank\" target=\"_blank\"\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003cspan\u003e\u003cstrong\u003eDTL Tank\u003c\/strong\u003e\u003c\/span\u003e\u003c\/a\u003e\u003cspan\u003e that takes the full TPP coil range, the MAAT is built for that.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eWhy vapers choose the MAAT Tank:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eVolcano Crater airflow engineering\u003c\/span\u003e\u003cspan\u003e channels air through the tank with 60% less resistance than conventional sub-ohm designs, and it drains condensate into an isolated chamber at the base so liquid stays off the mod connection\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eFull TPP coil compatibility\u003c\/span\u003e\u003cspan\u003e means four dedicated mesh coil options from 0.15ohm up to 0.3ohm, each tuned for a different DTL style\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eReplaceable Pyrex glass\u003c\/span\u003e\u003cspan\u003e keeps the tank repairable rather than disposable, and medical-grade Pyrex handles temperature and corrosion without cracking under normal use\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eScrew cap top fill\u003c\/span\u003e\u003cspan\u003e that stays sealed during transport. No accidental openings in bags or pockets.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eTwo coils in the box\u003c\/span\u003e\u003cspan\u003e covering a 40-100W range, so you can test both a moderate and a high-power draw before buying replacements\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eVoopoo MAAT Replacement Tank Features\u003c\/span\u003e\u003c\/h2\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eVolcano Crater Airflow is the Whole Point\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eMost sub-ohm tanks push air through a single channel at the base. The MAAT uses what Voopoo calls a Volcano Crater structure: a dual-pathway system that feeds air from two directions simultaneously. The practical result is a noticeably easier DTL inhale with denser vapour at the same wattage compared to single-path designs. The crater shape also acts as a condensate trap, draining any liquid that collects during use into an isolated chamber below the coil. That keeps moisture off the 510 pin and away from your mod's connection plate.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eWhy Dual In One Tech 2.0 Matters for Coil Life\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eVoopoo's Dual In One Tech 2.0 refers to the mesh construction inside each TPP coil. The mesh layer is shaped to distribute heat more evenly across the full surface area, which reduces hotspots. Fewer hotspots means the cotton behind the mesh degrades more slowly. In practice, you get a longer stretch of clean flavour before that burnt, sweet aftertaste signals a coil change. The tech runs across all four TPP coil options, not just the two in the box.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eScrew Cap, Not Slide\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eSlide-to-fill caps can pop open in bags, coat pockets, or anywhere pressure shifts. The MAAT uses a threaded screw cap instead. Twist to open, fill, twist to close. It is a small detail, but it is the difference between a clean pocket and an e-liquid stain. Worth mentioning: the fill port is wide enough for most bottle nozzles, including shortfill bottles with larger tips.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003e810 Drip Tip for Open Draws\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe included 810 wide-bore drip tip suits the airflow design. Wide bore means more air volume per draw, which pairs naturally with the sub-ohm coils running at 40W and above. If you prefer a slightly different feel, any standard 810 drip tip fits. Browse\u003c\/span\u003e\u003cspan\u003e\u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/drip-tips-and-mouthpieces\"\u003e \u003c\/a\u003e\u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/drip-tips-and-mouthpieces\" title=\"Drip Tips and Mouthpieces\" target=\"_blank\"\u003e\u003cstrong\u003eD\u003c\/strong\u003e\u003c\/a\u003e\u003c\/span\u003e\u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/drip-tips-and-mouthpieces\" title=\"Drip Tips and Mouthpieces\" target=\"_blank\"\u003e\u003cstrong\u003erip Tips and Mouthpieces\u003c\/strong\u003e\u003c\/a\u003e\u003cspan\u003e for alternatives.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eStainless Steel That Earns Its Keep\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe outer shell is stainless steel with corrosion resistance built for daily use. No paint to chip. No plastic to crack if it rolls off a desk. The Pyrex glass section in the middle is replaceable, so a single drop does not mean a new tank, just a new glass. That is a running cost difference worth noting over sealed tank designs.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eVoopoo MAAT Replacement Tank Colours\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eTwo finishes. Both use the same stainless steel construction with a colour-matched finish.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003e#buttons\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\"\u003eSilver\u003c\/li\u003e\n\u003cli dir=\"ltr\"\u003eGunmetal\u003cspan\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eHow to Set Up the Voopoo MAAT Replacement Tank\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eNew tank, fresh coils, a few minutes of patience.\u003c\/span\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eUnscrew the base of the MAAT Tank from the glass section. The \u003c\/span\u003e\u003cspan\u003eTPP coil\u003c\/span\u003e\u003cspan\u003e pushes into the base with a press-fit connection. Remove any protective packaging from the coil.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eTake the \u003c\/span\u003e\u003cspan\u003e0.2ohm TPP-DM2\u003c\/span\u003e\u003cspan\u003e or \u003c\/span\u003e\u003cspan\u003e0.15ohm TPP-DM3\u003c\/span\u003e\u003cspan\u003e coil from the box. Apply \u003c\/span\u003e\u003cspan\u003efour to five drops of e-liquid\u003c\/span\u003e\u003cspan\u003e directly onto the exposed cotton ports on the side and top of the coil. Spread the liquid across each visible cotton window.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003ePress the primed coil firmly into the base until it clicks into place. Reassemble the tank by screwing the glass section back onto the base.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eUnscrew the top cap and fill with your preferred \u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/high-vg-e-liquid\"\u003e\u003cstrong\u003eH\u003c\/strong\u003e\u003c\/a\u003e\u003c\/span\u003e\u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/high-vg-e-liquid\" target=\"_blank\" title=\"High-VG E-liquid\" rel=\"noopener\"\u003e\u003cstrong\u003eigh-VG E-liquid\u003c\/strong\u003e\u003c\/a\u003e\u003cspan\u003e through the fill port. Leave a small air gap below the rim.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eScrew the cap closed and \u003c\/span\u003e\u003cspan\u003estand the filled tank upright for six to seven minutes\u003c\/span\u003e\u003cspan\u003e. The DM2 and DM3 coils both use dense mesh wicking that needs adequate time to absorb liquid through every layer. Rushing this step chars the cotton on the first fire.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eAttach the tank to your mod via the \u003c\/span\u003e\u003cspan\u003e510 connection\u003c\/span\u003e\u003cspan\u003e. Start at the \u003c\/span\u003e\u003cspan\u003elower end of the coil's wattage range\u003c\/span\u003e\u003cspan\u003e and increase gradually over the first few draws.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eWhat's in the Voopoo MAAT Replacement Tank Box\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eThe MAAT Tank with replaceable Pyrex glass section, \u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003ean 810 drip tip, \u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eone 0.2ohm TPP-DM2 coil, \u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eone 0.15ohm TPP-DM3 coil, \u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eand a user manual. \u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eNo e-liquid, no mod, no spare glass, no additional coils beyond the two included.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eThe Sub-Ohm DTL Tank for Voopoo's TPP Coil Ecosystem\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe MAAT Tank runs on Voopoo's entire TPP coil range, which currently includes four resistances. The \u003c\/span\u003e\u003cspan\u003eTPP-DM1 at 0.15ohm\u003c\/span\u003e\u003cspan\u003e (60-80W) leans towards sweetness. The \u003c\/span\u003e\u003cspan\u003eTPP-DM2 at 0.2ohm\u003c\/span\u003e\u003cspan\u003e (40-60W) balances density and flavour richness. The \u003c\/span\u003e\u003cspan\u003eTPP-DM3 at 0.15ohm\u003c\/span\u003e\u003cspan\u003e (80-100W) pushes output higher for bigger clouds. The \u003c\/span\u003e\u003cspan\u003eTPP-DM4 at 0.3ohm\u003c\/span\u003e\u003cspan\u003e (32-40W) dials things back for a softer, more delicate draw at lower wattage. All four are\u003c\/span\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/voopoo-coils\"\u003e \u003c\/a\u003e\u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/voopoo-coils\" title=\"Voopoo Coils\" target=\"_blank\"\u003eVoopoo Coils\u003c\/a\u003e\u003c\/strong\u003e\u003cspan\u003e that press-fit into the same base.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThis tank does not accept PnP coils, GTX coils, or any other coil platform. TPP only. If the coil does not say TPP on the packaging, it will not fit.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eAbout Voopoo\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe \u003cstrong\u003eTPP coil platform\u003c\/strong\u003e is one of \u003cstrong\u003eVoopoo's \u003c\/strong\u003emost widely adopted systems, running across multiple tanks and pod kits in the Drag and \u003cstrong\u003eVINCI ranges\u003c\/strong\u003e. The MAAT Tank sits in the \u003cstrong\u003eVINCI series\u003c\/strong\u003e but shares its coil base with tanks packaged alongside the \u003cstrong\u003eDrag S2, Drag X2, and ARGUS GT II \u003c\/strong\u003eamong others. That cross-device compatibility is deliberate. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eVoopoo builds around coil ecosystems rather than locking each device to a proprietary cartridge, which means swapping between\u003c\/span\u003e\u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/voopoo-vapes\"\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/a\u003e\u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/voopoo-vapes\" target=\"_blank\" title=\"Voopoo Devices\" rel=\"noopener\"\u003e\u003cstrong\u003eVoopoo Devices\u003c\/strong\u003e\u003c\/a\u003e\u003cspan\u003e\u003cstrong\u003e \u003c\/strong\u003edoes not mean starting over with a new coil type every time.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eStock Up and Save\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eTwo coils in the box get you started, but at daily DTL use you will want a spare pack within a couple of weeks. Grabbing a set of\u003c\/span\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/vape-coils\"\u003e \u003c\/a\u003e\u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/vape-coils\" target=\"_blank\" title=\"Replacement Vape Coils\" rel=\"noopener\"\u003eReplacement Vape Coils\u003c\/a\u003e\u003c\/strong\u003e\u003cspan\u003e\u003cstrong\u003e \u003c\/strong\u003ealongside the tank means you are covered for the first month without a second order. A spare Pyrex section is worth adding too, because glass does break. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eEvery order from\u003cstrong\u003e \u003c\/strong\u003e\u003c\/span\u003e\u003cstrong\u003ePirate Vapes\u003c\/strong\u003e\u003cspan\u003e\u003cstrong\u003e \u003c\/strong\u003eships the same day before 4 pm with padded, device-safe packaging. TPD-compliant stock, age-verified checkout, over 18s only. Spend over £25 and delivery is on us with Free Pirate Post.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eConclusion\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe \u003cstrong\u003eMAAT Tank\u003c\/strong\u003e is a straightforward sub-ohm\u003cstrong\u003e DTL tank\u003c\/strong\u003e built around \u003cstrong\u003eVoopoo's TPP coil\u003c\/strong\u003e ecosystem. Volcano Crater airflow, stainless steel and Pyrex construction, two mesh coils in the box, and a 510 connection that fits the vast majority of regulated mods. If you already use TPP coils on another device, this tank gives you a second option without buying new consumables. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eIf you are new to \u003cstrong\u003eVoopoo\u003c\/strong\u003e, the included \u003cstrong\u003eDM2 \u003c\/strong\u003eand \u003cstrong\u003eDM3 \u003c\/strong\u003ecoils cover a 40-100W range that suits most DTL preferences out of the box. Browse the full range of\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003evape accessories\u003c\/span\u003e\u003cspan\u003e and\u003c\/span\u003e\u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/vape-tanks\" target=\"_blank\" title=\"Vape Tanks\" rel=\"noopener\"\u003e\u003cspan\u003e \u003cstrong\u003eV\u003c\/strong\u003e\u003c\/span\u003e\u003cstrong\u003eape Tanks\u003c\/strong\u003e\u003c\/a\u003e\u003cspan\u003e at\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003ePirate Vapes\u003c\/strong\u003e\u003cspan\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eFAQs\u003c\/span\u003e\u003c\/h2\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eWhat coils fit the MAAT Tank?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eAll Voopoo TPP coils. Four options currently: \u003c\/span\u003e\u003cspan\u003eTPP-DM1\u003c\/span\u003e\u003cspan\u003e (0.15ohm, 60-80W), \u003c\/span\u003e\u003cspan\u003eTPP-DM2\u003c\/span\u003e\u003cspan\u003e (0.2ohm, 40-60W), \u003c\/span\u003e\u003cspan\u003eTPP-DM3\u003c\/span\u003e\u003cspan\u003e (0.15ohm, 80-100W), and \u003c\/span\u003e\u003cspan\u003eTPP-DM4\u003c\/span\u003e\u003cspan\u003e (0.3ohm, 32-40W). PnP coils do not fit. GTX coils do not fit. TPP only.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eDoes the MAAT Tank work with any mod?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eAny regulated mod with a 510 connection that outputs at least 32W. For the included coils, you want a mod capable of 60-100W to use both comfortably.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eWhat e-liquid ratio works best?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eHigh-VG blends. 70\/30 or 80\/20 VG\/PG is ideal. The sub-ohm mesh coils wick thick liquids well, and higher VG produces denser clouds. Avoid high-PG or 50\/50 liquids in this tank. They are too thin for these coils and will flood the airflow.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eIs the glass replaceable?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eYes. The Pyrex section unscrews from the tank body. Replacement glass is available separately.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eHow long do the TPP coils last?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eTwo to three weeks with daily use and unsweetened e-liquid. Heavy sweetener in your juice shortens coil life significantly. You will taste the difference when it is time to swap.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eWhat is the UK capacity?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003e2ml\u003c\/span\u003e\u003cspan\u003e under TPD regulations. The international version holds 6.5ml, but only the 2ml configuration is sold in the UK.\u003c\/span\u003e\u003c\/p\u003e","brand":"VooPoo","offers":[{"title":"Silver","offer_id":52537283707162,"sku":null,"price":16.99,"currency_code":"GBP","in_stock":true},{"title":"Gunmetal","offer_id":52537283739930,"sku":null,"price":16.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0995\/5675\/3690\/files\/Voopoo_MAAT_Replacement_Tank.jpg?v=1784288730"},{"product_id":"uwell-whirl-2-tank","title":"Uwell Whirl 2 Sub-Ohm Tank","description":"\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eUwell Whirl 2 Sub-Ohm Tank\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eA 25mm tank built for both \u003cstrong\u003eMTL \u003c\/strong\u003eand \u003cstrong\u003eDTL vaping\u003c\/strong\u003e, with a 3.5ml capacity, \u003cstrong\u003e304 stainless steel\u003c\/strong\u003e construction, and \u003cstrong\u003eUwell’s Pro-FOCS coil \u003c\/strong\u003etechnology. The Whirl 2 ships with two coils: a 1.8Ω single coil for a tight \u003cstrong\u003emouth-to-lung draw \u003c\/strong\u003eat 10 to 15W, and a 0.6Ω dual coil for a looser direct-to-lung hit at 18 to 22W. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eQuarter-turn top fill, dual slotted adjustable airflow with five bored holes, and a curved top cap that wraps around the glass to protect it from knocks. Thread it onto any 510 mod, and it runs. \u003cstrong\u003ePirate Vapes\u003c\/strong\u003e ships the Whirl 2 tracked with age-verified UK delivery.\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eWhy do vapers choose this:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eMTL and DTL in one tank. The 1.8Ω coil gives a tight, cigarette-style draw at low wattage. The 0.6Ω coil opens things up for a looser lung hit with more vapour. Swap the coil, adjust the airflow, and the tank changes character completely. No need to own two tanks for two vaping styles.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003ePro-FOCS coil technology. Uwell’s proprietary flavour-testing system ensures each coil meets a consistent performance standard. The result is reliable flavour from coil to coil, with fewer duds in a pack than you get with some brands.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eGlass protection built into the design. The curved top cap and the airflow control ring both extend past the glass, creating a physical shield around it. A bump on a table edge hits the steel, not the glass. It is a small detail that matters when the tank lives in your pocket.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003e3.5ml capacity. Larger than most 2ml TPD tanks without being oversized. Fewer refills through the day, especially on the 1.8Ω MTL coil where e-liquid consumption is low.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eTwo coils and a spare glass in the box. Both coils included, plus an extra glass tube and replacement O-rings. You have everything you need to start vaping and a backup for when something breaks.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eAvailable Colours\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003e#buttons\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eBlack\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eSilver\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eBlue\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eRed and Black\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eUwell Whirl 2 Sub-Ohm Tank Features\u003c\/span\u003e\u003c\/h2\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eDual Coil System: MTL and DTL\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe 1.8Ω single coil runs at 10 to 15W and is designed for mouth-to-lung vaping. It produces minimal vapour, delivers a firm throat hit, and works well with higher-nicotine freebase liquids. The draw is tight and controlled, close to a cigarette. The 0.6Ω dual coil runs at 18 to 22W and opens the draw for direct-to-lung vaping. More vapour, more flavour intensity, and a warmer hit. Both coils use Uwell’s Pro-FOCS technology for consistent performance.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eAdjustable Airflow with Five Bored Holes\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe airflow control ring at the base of the tank has dual slots with five differently sized bored holes. Rotate the ring to open or close the airflow incrementally. Fully closed gives a tight MTL draw. Fully open gives a loose DTL inhale. Anywhere in between gives a restricted draw that sits between the two styles. The airflow is smooth, with no rattling or stiffness, and holds its position once set.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eQuarter-Turn Top Fill\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eA quarter-turn of the top cap reveals the fill port. No unscrewing, no removing the drip tip, no fiddling with silicone plugs. The mechanism is quick, straightforward, and designed to minimise spills. The lower-profile design of the Whirl 2 also means vapour travels a shorter distance from coil to drip tip, which helps preserve flavour accuracy.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eCurved Glass Protection\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe top cap and the airflow ring at the base both curve around the glass section, creating a concave profile that recesses the glass below the level of the steel. If the tank takes a knock, the metal absorbs the impact instead of the glass. It is a practical design choice for a tank that gets carried in pockets and bags daily.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eWhat E-Liquid to Use\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eHigh VG e-liquids work best with both coils. \u003cstrong\u003e60\/40 VG\/PG\u003c\/strong\u003e or thicker. For the 1.8Ω MTL coil, you can also use 50\/50 freebase or higher-PG blends at higher nicotine strengths (up to 18mg). For the 0.6Ω DTL coil, stick with \u003ca title=\"High-VG Shortfills\" href=\"https:\/\/piratevapes.co.uk\/collections\/high-vg-e-liquid\" target=\"_blank\"\u003e\u003cstrong\u003eHigh-VG Shortfills\u003c\/strong\u003e\u003c\/a\u003e at 6mg nicotine or lower. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eDo not put nic salts through the 0.6Ω DTL coil. The higher wattage and open draw will deliver too much nicotine too fast. Browse our \u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/e-liquids\" title=\"E-liquid Range\" target=\"_blank\"\u003e\u003cstrong\u003eE-liquid Range\u003c\/strong\u003e\u003c\/a\u003e at \u003cstrong\u003ePirate Vapes\u003c\/strong\u003e for shortfills and \u003cstrong\u003e50\/50 liquids\u003c\/strong\u003e that pair well with the Whirl 2.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eHow to Set Up the Uwell Whirl 2\u003c\/span\u003e\u003c\/h2\u003e\n\u003col\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eUnscrew the base of the tank and make sure the pre-installed 1.8Ω coil is pressed firmly into place.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eDrip 3–4 drops of e-liquid directly onto the exposed cotton ports on the side of the coil.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eScrew the tank base back together, then thread the 510 connection onto your mod until snug.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eGive the top cap a quarter-turn to remove it, fill the 3.5ml reservoir through the port, and twist the cap back on to lock it.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eLet the tank sit undisturbed to let the Pro-FOCS wicking material fully saturate.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eSet your mod between 10–15W for the pre-installed 1.8Ω MTL coil (or 18–22W if you swap to the 0.6Ω DTL coil).\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eRotate the bottom ring to select your preferred airflow holes, and you are ready to go.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eWhat’s in the Box\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003e1 x Uwell Whirl II Tank\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003e1 x Uwell Whirl 1.8Ω Single Coil (pre-installed)\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003e1 x Uwell Whirl 0.6Ω Dual Coil\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003e1 x Extra Glass Tube\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003e1 x Pack of Replacement O-Rings\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003e1 x User Manual\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003e1 x Drip Tip Cover\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eCompatibility\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe \u003cstrong\u003eUwell Whirl 2\u003c\/strong\u003e uses a standard 510 threaded connection. It fits the vast majority of vape mods on the market. The 0.6Ω coil needs a mod that can fire at 18 to 22W. The 1.8Ω coil needs a mod that can fire at 10 to 15W. Both wattage ranges are within the output of almost any regulated mod. The tank uses Uwell Whirl coils only. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eNot Uwell Crown coils, not \u003cstrong\u003eUwell Caliburn coils\u003c\/strong\u003e. Make sure you order the correct coils when restocking. Pirate Vapes stocks the Whirl 2 tank and the Uwell Whirl replacement coils together in our \u003ca rel=\"noopener\" title=\"Uwell Range\" href=\"https:\/\/piratevapes.co.uk\/collections\/uwell-vapes\" target=\"_blank\"\u003e\u003cstrong\u003eUwell Range\u003c\/strong\u003e\u003c\/a\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eAbout Uwell\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eUwell is best known in the UK for the Crown and Caliburn lines, but the Whirl series is where the brand’s MTL and crossover tanks live. The original \u003cstrong\u003eWhirl tank\u003c\/strong\u003e was a bestseller for mouth-to-lung vapers, and the \u003cstrong\u003eWhirl 2 \u003c\/strong\u003ebuilds on that with a revised airflow system, a dual-coil option for DTL, and \u003cstrong\u003ePro-FOCS technology \u003c\/strong\u003efor more consistent flavour. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eIt is one of the few tanks on the market that genuinely works for both MTL and DTL without compromise, which makes it a strong choice for vapers who want flexibility without owning multiple setups.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eStock Up and Save\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe tank ships with two coils, but they will not last forever. Having a pack of\u003cstrong\u003e Uwell Whirl replacement coils\u003c\/strong\u003e ready means you are never stuck on a burnt coil with a tank you cannot use. Add a shortfill or a bottle of \u003cstrong\u003e50\/50 \u003c\/strong\u003ealongside the coils and your order is sorted. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003e\u003cstrong\u003ePirate Vapes \u003c\/strong\u003esends everything in plain packaging, tracked to your door, age-verified checkout, 18+ delivery. Crew Rewards points go on every order. If you want coils arriving without thinking about it, set up The Crow’s Nest at \u003cstrong\u003ePirate Vapes\u003c\/strong\u003e and they come on repeat with a saving.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eConclusion\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003e25mm sub-ohm tank with genuine MTL and DTL capability. 3.5ml capacity. 304 stainless steel with curved glass protection. \u003cstrong\u003eUwell Pro-FOCS coil technology\u003c\/strong\u003e. Two coils included: 1.8Ω at 10 to 15W for MTL, 0.6Ω at 18 to 22W for DTL. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eDual slotted adjustable airflow with five bored holes. Quarter-turn top fill. 510 connection. Available in four colours. Grab one from \u003cstrong\u003ePirate Vapes\u003c\/strong\u003e with tracked, age-verified UK delivery.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eFAQs\u003c\/span\u003e\u003c\/h2\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eWhat is the e-liquid capacity?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003e3.5ml.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eCan this tank do both MTL and DTL?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eYes. The 1.8Ω coil is for MTL. The 0.6Ω coil is for DTL. The adjustable airflow lets you fine-tune the draw for either style.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eWhich coils does it use?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eUwell Whirl coils. The tank ships with a 1.8Ω single coil (pre-installed) and a 0.6Ω dual coil. Replacement coils are sold separately in packs of four.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eWill it fit my mod?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eIf your mod has a 510 connection and can fire between 10W and 22W, it will work. The 510 thread is the standard connection for vape tanks.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eWhat e-liquid should I use?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eHigh VG (60%+) for both coils. The 1.8Ω MTL coil can also handle 50\/50 blends. For the 0.6Ω DTL coil, use high-VG shortfills at 6mg nicotine or lower.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eIs a spare glass included?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eYes. An extra glass tube, replacement O-rings, and a drip tip cover are all included in the box.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eWhat colours are available?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eBlack, Silver, Blue, and Red and Black.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eIs this suitable for beginners?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eYes. The Whirl 2 is straightforward to set up and use. The MTL coil and tight airflow setting make it a good starting point for ex-smokers.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eHow do I change the coil?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003ePull the old coil out of the base of the tank. Push the new one in until it seats. Prime it with a few drops of e-liquid, fill the tank, and wait five minutes before vaping.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eDoes Pirate Vapes stock the replacement coils?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eYes. Uwell Whirl replacement coils are in our Uwell range at Pirate Vapes.\u003c\/span\u003e\u003c\/p\u003e","brand":"Uwell","offers":[{"title":"Black","offer_id":52537389187354,"sku":null,"price":12.99,"currency_code":"GBP","in_stock":true},{"title":"Silver","offer_id":52537389220122,"sku":null,"price":12.99,"currency_code":"GBP","in_stock":true},{"title":"Blue","offer_id":52537389252890,"sku":null,"price":12.99,"currency_code":"GBP","in_stock":true},{"title":"Red \u0026 Black","offer_id":52537389285658,"sku":null,"price":12.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0995\/5675\/3690\/files\/Uwell_Whirl_2_Sub-Ohm_Tank.jpg?v=1784292389"},{"product_id":"snowwolf-mfeng-ux-tank","title":"SnowWolf Mfeng UX Tank","description":"\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eSnowWolf Mfeng UX Tank\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eTwenty-eight millimetres across, mesh coils rated at \u003c\/span\u003e\u003cspan\u003e0.13ohm\u003c\/span\u003e\u003cspan\u003e, and a \u003c\/span\u003e\u003cspan\u003etriple-slotted adjustable airflow\u003c\/span\u003e\u003cspan\u003e ring on the bottom. The \u003cstrong\u003eSnowWolf Mfeng UX \u003c\/strong\u003eis a stainless steel sub-ohm tank built for\u003cstrong\u003e direct-to-lung vapers \u003c\/strong\u003ewho want warm, dense clouds without fiddly settings. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003e2ml TPD-compliant capacity\u003c\/strong\u003e\u003cspan\u003e\u003cstrong\u003e \u003c\/strong\u003ein the UK version, \u003c\/span\u003e\u003cspan\u003esliding top fill\u003c\/span\u003e\u003cspan\u003e so there is no cap to unscrew, and a \u003c\/span\u003e\u003cstrong\u003egold-plated 510 connection\u003c\/strong\u003e\u003cspan\u003e that sits cleanly on most modern\u003c\/span\u003e\u003cstrong\u003e\u003ca title=\"DTL Tanks\" href=\"https:\/\/piratevapes.co.uk\/collections\/dtl-tanks\" target=\"_blank\"\u003e DTL Tanks\u003c\/a\u003e\u003c\/strong\u003e\u003cspan\u003e and regulated mods.\u003cstrong\u003e Two \u003c\/strong\u003e\u003c\/span\u003e\u003cstrong\u003eWF-M mesh coils\u003c\/strong\u003e\u003cspan\u003e included in the box. Four finishes in the store picker. Over 18s only.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eWhy vapers choose the Mfeng UX:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eMesh heating at 0.13ohm\u003c\/span\u003e\u003cspan\u003e covers a broad surface area inside the coil housing, which translates to faster, more even heating and noticeably sharper flavour compared to traditional round-wire sub-ohm coils\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eTriple-slotted bottom airflow\u003c\/span\u003e\u003cspan\u003e gives you real control over draw resistance, from a slightly restricted lung hit with one slot open to wide-open cloud production with all three\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eSliding top fill with a single port\u003c\/span\u003e\u003cspan\u003e means refilling takes a few seconds without removing the tank from the mod or unscrewing any caps, and the seal is tight enough to prevent pocket leaks\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eTwo coils in the box\u003c\/span\u003e\u003cspan\u003e so you are not immediately hunting for replacements the moment the first one fades\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eGold-plated 510 threading\u003c\/span\u003e\u003cspan\u003e resists corrosion and maintains consistent conductivity across hundreds of connections\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eSnowWolf Mfeng UX Tank Features\u003c\/span\u003e\u003c\/h2\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eMesh at 0.13ohm Changes the Maths\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe WF-M coil sits at \u003c\/span\u003e\u003cspan\u003e0.13ohm\u003c\/span\u003e\u003cspan\u003e, which is low enough that the mesh element reaches operating temperature almost instantly. Larger heating surface, faster ramp, cleaner flavour from the first draw. At the rated \u003c\/span\u003e\u003cspan\u003e50 to 90W\u003c\/span\u003e\u003cspan\u003e, the mesh distributes heat evenly across the cotton rather than concentrating it in a single wire. That consistency matters for flavour accuracy. If you are running other sub-ohm coils above 0.2ohm, you will notice the difference. Worth checking the full\u003c\/span\u003e\u003cspan\u003e \u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/vape-coils\"\u003e\u003cstrong\u003eV\u003c\/strong\u003e\u003c\/a\u003e\u003c\/span\u003e\u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/vape-coils\"\u003e\u003cstrong\u003eape Coils\u003c\/strong\u003e\u003c\/a\u003e\u003cspan\u003e\u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/vape-coils\" target=\"_blank\" title=\"Vape Coils Range\" rel=\"noopener\"\u003e\u003cstrong\u003e Range\u003c\/strong\u003e\u003c\/a\u003e if you are comparing options.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eTriple Airflow Slots, Not Just a Single Hole\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThree separate slots on the bottom ring. Turn it, and you can close one, two, or all three independently. Fully open delivers a loose, airy draw suited to cloud-chasing at 80W or above. Close two slots down and you get a warmer, more concentrated DTL pull with tighter resistance. Most sub-ohm tanks give you one adjustable slot. Three is genuinely more versatile.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003ePyrex Bulb Glass That Takes a Knock\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe tank section uses reinforced \u003c\/span\u003e\u003cspan\u003epyrex glass\u003c\/span\u003e\u003cspan\u003e in a bulb profile. Pyrex handles thermal cycling without cracking, which matters when you are chain-vaping at high wattage. The bulb shape also increases the visible juice level, so you can see when you need to top up without guessing. A spare glass tube ships in the box. If you go through tanks frequently, keep a few extras from the\u003c\/span\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/replacement-tank-glass\"\u003e \u003c\/a\u003e\u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/replacement-tank-glass\" target=\"_blank\" title=\"Replacement Tank Glass\" rel=\"noopener\"\u003eReplacement Tank Glass\u003c\/a\u003e\u003c\/strong\u003e\u003cspan\u003e collection.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eSlide, Fill, Close\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eNo threading. No cap to lose. The top section slides open to reveal a single fill port large enough for most bottle nozzles. Slide it back and it locks. That is the entire refill process. Sounds minor until you have done it one-handed at a desk while still reading something on screen. Honestly, once you have used a sliding fill system you resent going back to screw caps.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003e810 Drip Tip, Low Profile\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe stock \u003c\/span\u003e\u003cspan\u003e810 drip tip\u003c\/span\u003e\u003cspan\u003e sits low against the top cap rather than extending upward like some sub-ohm tanks. Comfortable on the lips, wide enough for a full DTL draw, and it is a standard 810 fitting. Swap it for any aftermarket 810 tip from the\u003c\/span\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/drip-tips-and-mouthpieces\"\u003e \u003c\/a\u003e\u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/drip-tips-and-mouthpieces\" target=\"_blank\" title=\"Drip Tips And Mouthpieces\" rel=\"noopener\"\u003eDrip Tips And Mouthpieces\u003c\/a\u003e\u003c\/strong\u003e\u003cspan\u003e section if you prefer a different profile or material.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eSnowWolf Mfeng UX Tank Colours\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eFour finishes in the store picker. Each uses the same stainless steel body with a different surface treatment.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e#buttons\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli data-end=\"87\" data-start=\"78\" data-section-id=\"t3dqof\"\u003eBlack\u003cspan class=\"PDq2pG_selectionAnchor\" aria-hidden=\"true\"\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"96\" data-start=\"88\" data-section-id=\"1vm4tva\"\u003eBlue\u003c\/li\u003e\n\u003cli data-end=\"105\" data-start=\"97\" data-section-id=\"1xca97s\"\u003eGold\u003c\/li\u003e\n\u003cli data-is-last-node=\"\" data-end=\"123\" data-start=\"106\" data-section-id=\"17pe31n\"\u003eStainless Steel\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eHow to Set Up the SnowWolf Mfeng UX Tank\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eShort setup. The hardest part is being patient with the priming.\u003c\/span\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eUnscrew the base of the tank from the glass section. Remove the pre-installed \u003c\/span\u003e\u003cspan\u003eWF-M mesh coil\u003c\/span\u003e\u003cspan\u003e if you want to inspect it, or leave it seated.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eDrip \u003c\/span\u003e\u003cspan\u003efour to five drops of e-liquid\u003c\/span\u003e\u003cspan\u003e directly onto the exposed cotton visible through the side ports of the coil. Rotate the coil and apply drops to each port evenly.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eScrew the coil back into the base (clockwise, finger-tight). Do not overtighten or you will strip the threading.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eReattach the glass section and slide open the top fill port. Fill with your preferred \u003c\/span\u003e\u003cspan\u003ehigh-VG e-liquid\u003c\/span\u003e\u003cspan\u003e to just below the max line. Slide the top closed.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eStand the assembled tank upright for a full seven minutes.\u003c\/span\u003e\u003cspan\u003e The mesh element has a wide surface area, and the cotton behind it needs time to wick thoroughly from all sides. Firing before the cotton is saturated will scorch the mesh permanently, and no amount of re-priming will fix it.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eStart at \u003c\/span\u003e\u003cspan\u003e50W\u003c\/span\u003e\u003cspan\u003e and take a few gentle draws. Increase the wattage gradually toward \u003c\/span\u003e\u003cspan\u003e70 to 90W\u003c\/span\u003e\u003cspan\u003e once the coil is fully broken in after the first half-tank.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eWhat's in the SnowWolf Mfeng UX Tank Box\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eThe Mfeng UX tank with one \u003c\/span\u003e\u003cspan\u003e0.13ohm WF-M mesh coil\u003c\/span\u003e\u003cspan\u003e pre-installed and a second spare coil in the box. \u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eOne replacement pyrex glass tube, \u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003ea set of spare O-rings, \u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003euser manuals, \u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eand warranty cards. \u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eNo e-liquid, no mod, no batteries. You will need a regulated mod capable of at least \u003c\/span\u003e\u003cspan\u003e50W\u003c\/span\u003e\u003cspan\u003e and a bottle of\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003ee-liquid\u003c\/span\u003e\u003cspan\u003e to get started.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eThe Sub-Ohm Mesh Tank for Regulated Box Mods\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe \u003cstrong\u003eMfeng UX \u003c\/strong\u003ewas originally designed as the tank half of\u003cstrong\u003e SnowWolf's Mfeng UX 200W kit\u003c\/strong\u003e, but it works as a standalone on any mod with a \u003c\/span\u003e\u003cstrong\u003e510 connection\u003c\/strong\u003e\u003cspan\u003e\u003cstrong\u003e \u003c\/strong\u003eand enough wattage to drive the \u003c\/span\u003e\u003cspan\u003e0.13ohm\u003c\/span\u003e\u003cspan\u003e coil. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThat means most dual-battery\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003ebox mods\u003c\/span\u003e\u003cspan\u003e from major brands will pair comfortably. The \u003c\/span\u003e\u003cspan\u003e28mm diameter\u003c\/span\u003e\u003cspan\u003e is wider than average, so check your mod's top plate. Anything 25mm or wider should accommodate it without overhang.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eWhat it does not fit: single-battery mods below 50W, pen-style devices, or pod kits. The power demand and physical width rule those out entirely.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eAbout SnowWolf\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003e\u003cstrong\u003eSnowWolf \u003c\/strong\u003eis a sub-brand of\u003cstrong\u003e Sigelei\u003c\/strong\u003e, one of the longer-running Chinese vape hardware manufacturers with roots going back to the early days of regulated mods. The Mfeng line sits at the higher end of their range, built around zinc alloy mod bodies and mesh coil tanks designed for DTL cloud chasers. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eSnowWolf devices tend to lean into bold aesthetics: embossed wolf logos, metallic finishes, and hardware that looks like it belongs on a shelf rather than in a drawer. The WF coil series runs across multiple \u003cstrong\u003eSnowWolf tanks\u003c\/strong\u003e, which means coil availability extends beyond just this single model.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eStock Up and Save\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eTwo coils in the box covers your first few weeks, depending on how heavily you vape. After that, you will want spares ready, so you are not stuck with a burnt coil and no replacement. A spare glass tube is also worth having, because 28mm of pyrex bulb glass is not indestructible no matter what the spec sheet says. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eEvery order from \u003c\/span\u003e\u003cstrong\u003ePirate Vapes\u003c\/strong\u003e\u003cspan\u003e ships the same day before 4 pm. Age-verified checkout, TPD compliant stock, over-18s only. Free Pirate Post on orders over £25.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eConclusion\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe \u003cstrong\u003eMfeng UX\u003c\/strong\u003e is a straightforward sub-ohm mesh tank that does one thing well: dense, flavourful DTL clouds from a \u003c\/span\u003e\u003cstrong\u003e0.13ohm mesh coil\u003c\/strong\u003e\u003cspan\u003e at \u003c\/span\u003e\u003cspan\u003e50 to 90W\u003c\/span\u003e\u003cspan\u003e. Triple airflow, sliding top fill, stainless steel build, four colour options. It does not try to do MTL. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eIt does not pretend to be a pod. It is a dedicated \u003cstrong\u003eDTL tank \u003c\/strong\u003efor vapers who already own a capable mod and want reliable mesh performance without overcomplicating things. Browse more\u003c\/span\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/vape-accessories\"\u003e \u003c\/a\u003e\u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/vape-accessories\" target=\"_blank\" title=\"Vape Accessories\" rel=\"noopener\"\u003eVape Accessories\u003c\/a\u003e\u003c\/strong\u003e\u003cspan\u003e\u003cstrong\u003e \u003c\/strong\u003eand sub-ohm gear at\u003c\/span\u003e\u003cstrong\u003e Pirate Vapes\u003c\/strong\u003e\u003cspan\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eFAQs\u003c\/span\u003e\u003c\/h2\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eWhat coils does the Mfeng UX use?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe \u003c\/span\u003e\u003cspan\u003eSnowWolf WF-M mesh coil is 0.13ohm\u003c\/span\u003e\u003cspan\u003e, rated for \u003c\/span\u003e\u003cspan\u003e50 to 90W\u003c\/span\u003e\u003cspan\u003e. Two are included in the box. Replacements are sold separately as part of the WF coil series.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eWhat wattage works best?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eBetween \u003c\/span\u003e\u003cspan\u003e60W and 80W\u003c\/span\u003e\u003cspan\u003e is the sweet spot for most vapers. 50W is the minimum. 90W is the rated ceiling. Start low and work up.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eDoes it fit any mod?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eAny regulated mod with a \u003c\/span\u003e\u003cspan\u003e510 connection\u003c\/span\u003e\u003cspan\u003e and at least \u003c\/span\u003e\u003cspan\u003e50W\u003c\/span\u003e\u003cspan\u003e output. The tank is \u003c\/span\u003e\u003cspan\u003e28mm\u003c\/span\u003e\u003cspan\u003e wide, so check your mod's top plate for overhang. Dual-battery box mods are the natural pairing.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eCan I use nic salts in this tank?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eNo. The \u003c\/span\u003e\u003cspan\u003e0.13ohm\u003c\/span\u003e\u003cspan\u003e resistance and \u003c\/span\u003e\u003cspan\u003e50 to 90W\u003c\/span\u003e\u003cspan\u003e range make this unsuitable for nicotine salts. Use freebase e-liquid at \u003c\/span\u003e\u003cspan\u003e3mg to 6mg\u003c\/span\u003e\u003cspan\u003e in a high-VG blend. Nic salts through a sub-ohm coil at this wattage would be extremely harsh.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eHow long do the WF-M coils last?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eDepends on your liquid and wattage. Expect roughly \u003c\/span\u003e\u003cspan\u003eone to three weeks\u003c\/span\u003e\u003cspan\u003e per coil with regular use. Sweet or heavily coloured liquids shorten coil life. Staying within the recommended wattage range helps.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eWhat is the tank capacity in the UK?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003e2ml\u003c\/span\u003e\u003cspan\u003e under TPD regulations. The tank ships with a TPD-compliant glass section for UK retail.\u003c\/span\u003e\u003c\/p\u003e","brand":"SnowWolf","offers":[{"title":"Black","offer_id":52543214616858,"sku":null,"price":21.99,"currency_code":"GBP","in_stock":true},{"title":"Blue","offer_id":52543214649626,"sku":null,"price":21.99,"currency_code":"GBP","in_stock":true},{"title":"Gold","offer_id":52543214682394,"sku":null,"price":21.99,"currency_code":"GBP","in_stock":true},{"title":"Stainless Steel","offer_id":52543214715162,"sku":null,"price":21.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0995\/5675\/3690\/files\/SnowWolf_Mfeng_UX_Tank.jpg?v=1784350911"},{"product_id":"smok-tfv12-prince-tank","title":"Smok TFV12 Prince Tank","description":"\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eSmok TFV12 Prince Tank\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThree coils in one box. That's the whole pitch, really. The \u003c\/span\u003e\u003cstrong\u003eSmok TFV12 Prince Tank\u003c\/strong\u003e\u003cspan\u003e\u003cstrong\u003e \u003c\/strong\u003ecomes as a \u003c\/span\u003e\u003cstrong\u003e2ml TPD-compliant\u003c\/strong\u003e\u003cspan\u003e\u003cstrong\u003e sub-ohm tank\u003c\/strong\u003e in \u003c\/span\u003e\u003cspan\u003estainless steel\u003c\/span\u003e\u003cspan\u003e, with the \u003c\/span\u003e\u003cstrong\u003eQ4 0.4ohm\u003c\/strong\u003e\u003cspan\u003e already fitted and the \u003c\/span\u003e\u003cstrong\u003eX6 0.15ohm\u003c\/strong\u003e\u003cspan\u003e and \u003c\/span\u003e\u003cstrong\u003eT10 0.12ohm\u003c\/strong\u003e\u003cspan\u003e sat in the box waiting for you to try them. Bottom \u003c\/span\u003e\u003cspan\u003eadjustable airflow\u003c\/span\u003e\u003cspan\u003e. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eTop-fill\u003c\/span\u003e\u003cspan\u003e cap that locks shut properly. Standard \u003c\/span\u003e\u003cspan\u003e510 thread\u003c\/span\u003e\u003cspan\u003e, so it clicks onto most\u003c\/span\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/vape-mods\"\u003e \u003c\/a\u003e\u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/vape-mods\" target=\"_blank\" title=\"Vape Mods\" rel=\"noopener\"\u003eVape Mods\u003c\/a\u003e\u003c\/strong\u003e\u003cspan\u003e without drama. If you want to test three completely different draws without buying three tanks, this is the shortcut.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eWhy vapers choose this:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eThree coils, three completely different vapes.\u003c\/span\u003e\u003cspan\u003e Not a marginal difference either. Q4 to T10 is a genuinely different experience.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eReal stainless steel.\u003c\/span\u003e\u003cspan\u003e Not painted plastic that scuffs in your pocket within a fortnight.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eAirflow control that goes from a tight pull to fully open with one twist\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eTop-fill design\u003c\/span\u003e\u003cspan\u003e saves you pulling the tank off the mod every refill\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eFits nearly every 510-threaded box mod on the market. Nearly.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eSmok TFV12 Prince Tank Features\u003c\/span\u003e\u003c\/h2\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eOne Box, Three Vapes\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eBuy most sub-ohm tanks, and you get one coil, then you're back online ordering more a week later trying to figure out what suits you. The Prince skips that. \u003c\/span\u003e\u003cspan\u003eQ4, X6, T10\u003c\/span\u003e\u003cspan\u003e, all three in the box on day one. Try them back to back over a weekend. You'll know which one you like within about ten minutes of vaping, honestly.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eWhy Does the T10 Hit So Differently?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eTen heating elements, arranged vertically. That's what \"decuple\" means, and it's why this coil produces the density of vapour it does. Not subtle. Not trying to be. If your mod caps out under 60W, though, leave this one in the box and reach for the Q4 instead.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eStainless steel doesn't warp the way cheaper tank bodies do under sustained high-wattage use, and that matters more than people think when you're running the T10 near 100W for an hour straight.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eAirflow You Can Actually Feel Changing\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eSlots sit at the base, below the coil chamber. Close them down, and the draw tightens up, gets warmer. Open them fully, and it's a different tank altogether, airy and loose, built for high-VG liquid. Worth spending five minutes finding your spot rather than leaving it wherever it landed out of the box.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eLocking Top Fill. Sounds Small. Isn't.\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eFlip the cap, fill through the port, click it shut. The lock stops it swinging open mid-draw, which sounds like a non-issue until it's happened to you once with a full tank in your bag. Pair the tank with something from the\u003c\/span\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/70-30-shortfills\" target=\"_blank\" title=\" 70-30 Shortfills \" rel=\"noopener\"\u003e 70-30 Shortfills\u003c\/a\u003e\u003c\/strong\u003e\u003cspan\u003e\u003cstrong\u003e \u003c\/strong\u003erange if you're chasing thicker clouds through the X6 or T10.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eBuilt for Regular Use, Not a Shelf Display\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eSome sub-ohm tanks are built to look impressive and fall apart under daily use. This one's the opposite. Crown-style design, stainless build, three coils rated for genuine everyday vaping rather than the occasional weekend cloud session.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eSmok TFV12 Prince Tank Colours\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eNine finishes. Same stainless body underneath every single one.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e#buttons\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli data-section-id=\"1w05wsz\" data-start=\"152\" data-end=\"178\"\u003eBlack with Red Accents\u003cspan aria-hidden=\"true\" class=\"PDq2pG_selectionAnchor\"\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli data-section-id=\"2cb0sk\" data-start=\"179\" data-end=\"195\"\u003eMulti-colour\u003c\/li\u003e\n\u003cli data-section-id=\"1xca97s\" data-start=\"196\" data-end=\"204\"\u003eGold\u003c\/li\u003e\n\u003cli data-section-id=\"1l1v5i7\" data-start=\"205\" data-end=\"215\"\u003eSilver\u003c\/li\u003e\n\u003cli data-section-id=\"uh14xy\" data-start=\"216\" data-end=\"226\"\u003ePurple\u003c\/li\u003e\n\u003cli data-section-id=\"1778o6p\" data-start=\"227\" data-end=\"243\"\u003eBright Green\u003c\/li\u003e\n\u003cli data-section-id=\"1lsrm0m\" data-start=\"244\" data-end=\"257\"\u003eNavy Blue\u003c\/li\u003e\n\u003cli data-section-id=\"1m9tdq1\" data-start=\"258\" data-end=\"272\"\u003eBright Red\u003c\/li\u003e\n\u003cli data-section-id=\"3x6cza\" data-start=\"273\" data-end=\"286\" data-is-last-node=\"\"\u003eBright Pink\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eGloss finishes show fingerprints. Fair warning if you're precious about that sort of thing.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eHow to Set Up the Smok TFV12 Prince Tank\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eNot complicated. A few minutes if it's your first go.\u003c\/span\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eUnscrew the base from the glass to expose the coil chamber.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eScrew your chosen coil in (Q4 is already fitted) until it sits flush.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eDrop \u003c\/span\u003e\u003cspan\u003ethree to four drops of e-liquid\u003c\/span\u003e\u003cspan\u003e straight onto the coil ports before you close it back up.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eReattach the glass and base, then top-fill through the flip cap.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eWait six minutes.\u003c\/span\u003e\u003cspan\u003e Set a timer if you have to. The cotton needs that long to saturate properly, and rushing it is how coils die on day one.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eFire at the coil's lowest recommended wattage first. Build up from there.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eWhat's in the Smok TFV12 Prince Tank Box\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eOne tank, your chosen colour. \u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eQ4 0.4ohm pre-installed. \u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eX6 0.15ohm and T10 0.12ohm sitting alongside it as spares. \u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eA manual, and a small pack of spare seals for when the originals wear out. \u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eNo e-liquid. No mod. No battery. Bring your own.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eBuilt for Box Mods, Not Every Mod\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe 510 thread fits most\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003evape mods\u003c\/span\u003e\u003cspan\u003e going. That part's easy. The coils are where it gets specific: the\u003cstrong\u003e T10\u003c\/strong\u003e wants \u003cstrong\u003e80-110W\u003c\/strong\u003e to actually perform, and the X6 sits happiest around 80-100W. Feed either one a weak mod, and you'll get a lukewarm, disappointing vape.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eWhat it won't do is take coils from the original \u003cstrong\u003eTFV12 King tank\u003c\/strong\u003e. Similar name, different coil family entirely. Don't assume otherwise. Need a replacement glass down the line? The\u003c\/span\u003e\u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/replacement-tank-glass\"\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/a\u003e\u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/replacement-tank-glass\" target=\"_blank\" title=\"Replacement Tank Glass\" rel=\"noopener\"\u003e\u003cstrong\u003eReplacement Tank Glass\u003c\/strong\u003e\u003c\/a\u003e\u003cspan\u003e collection has you covered.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eAbout Smok\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe original \u003cstrong\u003eTFV12\u003c\/strong\u003e, the Cloud Beast King, is basically what put Smok on the map for serious cloud production. The Prince took that reputation and shrank it into something built for actual daily use rather than competition-style vaping. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThree coils, purpose-built for this tank specifically, each tuned toward a different balance of flavour and vapour. It's stuck around this long for a reason: buying three separate tanks to test three draws is annoying, and the Prince just solves that outright.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eStock Up and Save\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003e\u003cstrong\u003eSub-ohm coils \u003c\/strong\u003eburn out faster than MTL ones. Run the T10 daily above 90W, and you'll notice the flavour dropping off sooner than you'd like. Grab a spare coil pack with the tank so you're not caught out mid-week. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003ePirate Vapes\u003c\/strong\u003e\u003cspan\u003e dispatches same-day before 4 pm, every order age-verified at checkout. TPD compliant, over 18s only, and Free Pirate Post kicks in over £25.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eConclusion\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThree coils, one 2ml tank, genuinely different results from each. That's not something most sub-ohm tanks in this price bracket can claim. Stainless build, proper adjustable airflow, a top fill that actually locks shut. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eIf your mod can push 80W or more and you want flexibility rather than committing to one fixed draw, this earns its spot. Have a look at the\u003c\/span\u003e\u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/dtl-tanks\"\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/a\u003e\u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/dtl-tanks\" target=\"_blank\" title=\"DTL Tanks\" rel=\"noopener\"\u003e\u003cstrong\u003eDTL Tanks\u003c\/strong\u003e\u003c\/a\u003e\u003cspan\u003e range for more sub-ohm options, browse\u003c\/span\u003e\u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/smok-vapes\"\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/a\u003e\u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/smok-vapes\" target=\"_blank\" title=\"SMOK Vapes\" rel=\"noopener\"\u003e\u003cstrong\u003eSMOK Vapes\u003c\/strong\u003e\u003c\/a\u003e\u003cspan\u003e more broadly, or head back to\u003c\/span\u003e\u003cstrong\u003e Pirate Vapes\u003c\/strong\u003e\u003cspan\u003e\u003cstrong\u003e \u003c\/strong\u003eto see what else pairs well.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eFAQs\u003c\/span\u003e\u003c\/h2\u003e\n\u003ch4 dir=\"ltr\"\u003e\u003cspan\u003eWhich coils actually fit the Prince?\u003c\/span\u003e\u003c\/h4\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eJust the Prince family: \u003c\/span\u003e\u003cspan\u003eQ4 (0.4ohm)\u003c\/span\u003e\u003cspan\u003e, \u003c\/span\u003e\u003cspan\u003eX6 (0.15ohm)\u003c\/span\u003e\u003cspan\u003e, \u003c\/span\u003e\u003cspan\u003eT10 (0.12ohm)\u003c\/span\u003e\u003cspan\u003e. Nothing from the original TFV12 King tank works here.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch4 dir=\"ltr\"\u003e\u003cspan\u003eWhat wattage does the T10 need?\u003c\/span\u003e\u003c\/h4\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003e80-110W, ideally. It'll fire below that, but you're wasting the coil at that point.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch4 dir=\"ltr\"\u003e\u003cspan\u003eOnly 2ml? Really?\u003c\/span\u003e\u003c\/h4\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eYes. That's the UK TPD cap. Other markets get more; UK stock doesn't.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch4 dir=\"ltr\"\u003e\u003cspan\u003eDoes it leak?\u003c\/span\u003e\u003c\/h4\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eRarely, and almost always because a coil wasn't screwed in fully. Check that first if you get drips.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch4 dir=\"ltr\"\u003e\u003cspan\u003eHow long does the Q4 last day to day?\u003c\/span\u003e\u003c\/h4\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eFive to seven days on average. Sweeter liquid or higher VG shortens that a bit.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch4 dir=\"ltr\"\u003e\u003cspan\u003eAny mod work with this?\u003c\/span\u003e\u003c\/h4\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003ePhysically, yes, any 510 thread. Practically, you want at least 60W on tap to get anything worthwhile out of it.\u003c\/span\u003e\u003c\/p\u003e","brand":"SMOK","offers":[{"title":"Black with Red Accents","offer_id":52543387992346,"sku":null,"price":27.99,"currency_code":"GBP","in_stock":true},{"title":"Multi-colour","offer_id":52543388025114,"sku":null,"price":27.99,"currency_code":"GBP","in_stock":true},{"title":"Gold","offer_id":52543388057882,"sku":null,"price":27.99,"currency_code":"GBP","in_stock":true},{"title":"Silver","offer_id":52543388090650,"sku":null,"price":27.99,"currency_code":"GBP","in_stock":true},{"title":"Purple","offer_id":52543388123418,"sku":null,"price":27.99,"currency_code":"GBP","in_stock":true},{"title":"Bright Green","offer_id":52543388156186,"sku":null,"price":27.99,"currency_code":"GBP","in_stock":true},{"title":"Navy Blue","offer_id":52543388188954,"sku":null,"price":27.99,"currency_code":"GBP","in_stock":true},{"title":"Bright Red","offer_id":52543388221722,"sku":null,"price":27.99,"currency_code":"GBP","in_stock":true},{"title":"Bright Pink","offer_id":52543388254490,"sku":null,"price":27.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0995\/5675\/3690\/files\/Smok_TFV12_Prince_Tank.jpg?v=1784352037"},{"product_id":"voopoo-tpp-2-pod-tank","title":"Voopoo TPP 2 Pod Replacement Tank","description":"\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eVoopoo TPP 2 Pod Replacement Tank\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eBuilt around four \u003cstrong\u003eTPP-series mesh coils\u003c\/strong\u003e running from \u003cstrong\u003e32W \u003c\/strong\u003eup to \u003cstrong\u003e100W\u003c\/strong\u003e, the \u003c\/span\u003e\u003cstrong\u003eVoopoo TPP 2 Pod Replacement Tank\u003c\/strong\u003e\u003cspan\u003e is the spare or upgrade tank for \u003cstrong\u003eVoopoo's TPP platform devices\u003c\/strong\u003e, including the \u003c\/span\u003e\u003cspan\u003eDrag X Plus Pro\u003c\/span\u003e\u003cspan\u003e. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eStainless steel and \u003cstrong\u003ePCTG construction\u003c\/strong\u003e, a \u003cstrong\u003e2ml TPD-compliant \u003c\/strong\u003ecapacity, and a redesigned 810 drip tip with sealed, condensation-resistant tech make this the updated version of the original TPP tank. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eBottom adjustable airflow lets you dial in the draw, and full \u003cstrong\u003eDM1 \u003c\/strong\u003eto \u003cstrong\u003eDM4 \u003c\/strong\u003ecoil compatibility means flavour and cloud output scale to whatever your mod can push. TPD compliant. Over 18s only.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eWhy vapers choose this:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eGenuine TPP coil compatibility.\u003c\/span\u003e\u003cspan\u003e Runs the full DM1 to DM4 range, so you are not locked into one resistance or one style of draw.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003e810 drip tip with sealed tech.\u003c\/span\u003e\u003cspan\u003e Reduces condensation build-up around the mouthpiece, a common complaint on older sub-ohm tanks.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eStainless steel and PCTG build.\u003c\/span\u003e\u003cspan\u003e Sturdier than an all-plastic tank, with PCTG keeping weight down.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eBottom adjustable airflow.\u003c\/span\u003e\u003cspan\u003e Open it up for dense DTL clouds or tighten it for a warmer, more restricted draw.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eA direct replacement, not a compromise.\u003c\/span\u003e\u003cspan\u003e Built specifically for TPP platform devices like the Drag X Plus Pro, so fitment is exact.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eVoopoo TPP 2 Pod Replacement Tank Features\u003c\/span\u003e\u003c\/h2\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eFour Coils, One Tank, Real Range\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe DM1 sits at 0.15ohm for 60 to 80W. The DM2 runs 0.2ohm at 40 to 60W. The DM3 pushes higher still at 0.15ohm for 80 to 100W, while the DM4 is the half-DL option at 0.3ohm and 32 to 40W. Genuine flexibility from one tank body.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eMesh Coils Built for Speed\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eVoopoo's TPP-series coils use a dual mesh structure developed through extensive VOOPOO Lab testing. The larger atomisation surface heats faster and more evenly than a standard round coil, giving quicker ramp-up and a consistent hit from the start.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eA Drip Tip That Actually Solves a Problem\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe removable 810 tip uses a patented sealed fitting to cut down spit-back and condensation pooling, a common complaint on older sub-ohm tanks. It matters more the higher up the wattage range you run.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eSide-Fill Access Without the Faff\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eRefilling is via a side fill point rather than unscrewing the whole top cap. Quicker top-ups, less mess, and no need to remove the\u003c\/span\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/drip-tips-and-mouthpieces\"\u003e \u003c\/a\u003e\u003ca title=\"Drip Tips\" href=\"https:\/\/piratevapes.co.uk\/collections\/drip-tips-and-mouthpieces\" target=\"_blank\"\u003eDrip Tips\u003c\/a\u003e\u003c\/strong\u003e\u003cspan\u003e\u003cstrong\u003e \u003c\/strong\u003eto get to it.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eVoopoo TPP 2 Pod Replacement Tank Colours\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eOne finish in the current range: \u003c\/span\u003e\u003cspan\u003eBlack\u003c\/span\u003e\u003cspan\u003e, a matte, understated look that matches the Drag X Plus Pro and most other TPP platform devices.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eHow to Fit and Fill the Voopoo TPP 2 Pod Replacement Tank\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eQuick to swap onto a compatible mod. A couple of minutes, start to finish.\u003c\/span\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eUnscrew the base\u003c\/span\u003e\u003cspan\u003e to expose the coil chamber.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eFit your chosen TPP-DM coil\u003c\/span\u003e\u003cspan\u003e, pressing it firmly into place until it seats.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eReattach the base\u003c\/span\u003e\u003cspan\u003e and screw the tank onto your device's 510 connection.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eOpen the side fill port\u003c\/span\u003e\u003cspan\u003e and add e-liquid, keeping clear of the central airflow tube.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eLet the coil soak for six to eight minutes\u003c\/span\u003e\u003cspan\u003e before your first draw. Skipping this is the biggest cause of burnt hits on new mesh.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eSet the airflow\u003c\/span\u003e\u003cspan\u003e and start vaping at the lower end of the coil's wattage range, increasing gradually.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eWhat's in the Voopoo TPP 2 Pod Replacement Tank Box\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eTwo TPP 2 pod tank bodies, \u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eone TPP-DM1 coil, \u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eone TPP-DM2 coil, \u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eand a user manual. \u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eNo device, no e-liquid, and no coils beyond the two included.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eBuilt for the TPP Platform, Including the Drag X Plus Pro\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThis tank is designed for \u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/voopoo-tpp-coils\"\u003e\u003cstrong\u003eVoopoo's \u003c\/strong\u003e\u003c\/a\u003e\u003c\/span\u003e\u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/voopoo-tpp-coils\" target=\"_blank\" title=\"Voopoo's TPP Platform\" rel=\"noopener\"\u003e\u003cstrong\u003eTPP Platform\u003c\/strong\u003e\u003c\/a\u003e\u003cspan\u003e devices. The \u003c\/span\u003e\u003cstrong\u003eDrag X Plus Pro\u003c\/strong\u003e\u003cspan\u003e\u003cstrong\u003e \u003c\/strong\u003eis confirmed compatible, and TPP coils are shared across other\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003eVoopoo\u003c\/span\u003e\u003cspan\u003e mods in the wider TPP range. If your device takes TPP-series coils on a 510 connection, this tank should fit.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eIt will not fit devices built around \u003cstrong\u003ePnP \u003c\/strong\u003eor \u003cstrong\u003eVinci-format pods\u003c\/strong\u003e, since those platforms use different coil threading entirely. Check your current coil packaging for \"TPP\" before ordering.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eAbout Voopoo\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eVoopoo built its reputation on the GENE chipset family and the Drag line of mods, and the TPP coil platform grew from that same push for higher output without sacrificing flavour. VOOPOO Lab's dual mesh coil work sits behind every TPP-DM coil this tank runs, scaling from a gentle 32W half-DL draw to 100W sub-ohm clouds from one tank body.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eStock Up and Save\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eA spare \u003cstrong\u003eTPP 2 tank \u003c\/strong\u003emeans a cracked panel or worn seal does not put your whole setup out of action. Pick up an extra alongside a pack of\u003cstrong\u003e DM coils\u003c\/strong\u003e, and you are covered for weeks. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eEvery order from \u003c\/span\u003e\u003cstrong\u003ePirate Vapes\u003c\/strong\u003e\u003cspan\u003e ships the same day before 4 pm, with an age-verified checkout and TPD-compliant stock throughout. Over 18s only.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eConclusion\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe TPP 2 is a proper upgrade over the original tank, not just a reskin. Four coil options spanning 32W to 100W, a drip tip that addresses condensation, and side-fill access that keeps refills quick add up to a tank worth having as a spare. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eIf you run a Drag X Plus Pro or another TPP platform device, this is the correct replacement. Browse more\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003evape tanks\u003c\/span\u003e\u003cspan\u003e and\u003c\/span\u003e\u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/dtl-tanks\"\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/a\u003e\u003ca title=\"DTL Tanks\" href=\"https:\/\/piratevapes.co.uk\/collections\/dtl-tanks\" target=\"_blank\"\u003e\u003cstrong\u003eDTL Tanks\u003c\/strong\u003e\u003c\/a\u003e\u003cspan\u003e, or head to\u003c\/span\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/vape-accessories\"\u003e \u003c\/a\u003e\u003ca title=\"Vape Accessories\" href=\"https:\/\/piratevapes.co.uk\/collections\/vape-accessories\" target=\"_blank\"\u003eVape Accessories\u003c\/a\u003e\u003c\/strong\u003e\u003cspan\u003e for coils and spares. For everything else,\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003ePirate Vapes\u003c\/strong\u003e\u003cspan\u003e has the full range.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eFAQs\u003c\/span\u003e\u003c\/h2\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eWhich coils fit the Voopoo TPP 2 Pod Tank?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe full TPP-DM range: \u003c\/span\u003e\u003cspan\u003eDM1, DM2, DM3, and DM4\u003c\/span\u003e\u003cspan\u003e. Resistances span 0.15ohm to 0.3ohm, covering 32W to 100W.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eIs this a bottom-fill or side-fill tank?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eSide fill.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eWhat is the e-liquid capacity?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003e2ml\u003c\/span\u003e\u003cspan\u003e in the UK TPD version stocked here. An international 4.5ml bubble glass exists as well. \u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eDoes this tank fit my Drag X?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eConfirmed compatible with the \u003c\/span\u003e\u003cspan\u003eDrag X Plus Pro\u003c\/span\u003e\u003cspan\u003e. If your device runs TPP-series coils on a standard 510 connection, it should fit.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eHow long do TPP-DM coils last?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eTypically one to two weeks with regular use, depending on wattage and how sweet your e-liquid is.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eCan I use nic salts in this tank?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eVoopoo recommends 10mg nicotine or below across the TPP-DM range, which suits nic salts as well as lower-strength freebase.\u003c\/span\u003e\u003c\/p\u003e","brand":"VooPoo","offers":[{"title":"Default Title","offer_id":52543941312794,"sku":null,"price":9.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0995\/5675\/3690\/files\/Voopoo_TPP_2_Pod_Replacement_Tank.jpg?v=1784355446"},{"product_id":"geekvape-obelisk-c-vape-tank","title":"Geekvape Obelisk C Vape Tank","description":"\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eGeekvape Obelisk C Vape Tank\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eA sub-ohm DTL tank built for cloud chasers who still want proper flavour. The\u003cstrong\u003e Geekvape Obelisk C runs \u003c\/strong\u003e\u003c\/span\u003e\u003cspan\u003e\u003cstrong\u003eGeekvape S Series \u003c\/strong\u003emesh coils\u003c\/span\u003e\u003cspan\u003e, comes with a \u003c\/span\u003e\u003cspan\u003etri-slotted adjustable bottom airflow ring\u003c\/span\u003e\u003cspan\u003e, and fills through a \u003c\/span\u003e\u003cspan\u003ethreaded top-fill system\u003c\/span\u003e\u003cspan\u003e that keeps refills quick and mess-free. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003e\u003cstrong\u003e2ml TPD-compliant \u003c\/strong\u003ecapacity\u003c\/span\u003e\u003cspan\u003e, \u003c\/span\u003e\u003cspan\u003estainless steel\u003c\/span\u003e\u003cspan\u003e build, \u003c\/span\u003e\u003cspan\u003e510 threaded\u003c\/span\u003e\u003cspan\u003e, and finished with an \u003c\/span\u003e\u003cspan\u003e810 wide bore drip tip\u003c\/span\u003e\u003cspan\u003e for those deep, open-lung pulls. Push-to-fit coil installation means no threading and no fuss. Four colours in the store picker. Over 18s only. Browse more\u003c\/span\u003e\u003cstrong\u003e\u003ca title=\"DTL Tanks\" href=\"https:\/\/piratevapes.co.uk\/collections\/dtl-tanks\" target=\"_blank\"\u003e DTL Tanks\u003c\/a\u003e\u003c\/strong\u003e\u003cspan\u003e at Pirate Vapes.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eWhy vapers choose the Obelisk C:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eTri-slotted bottom airflow\u003c\/span\u003e\u003cspan\u003e gives a genuinely adjustable draw instead of the single fixed setting most budget sub-ohm tanks offer\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eS Series mesh coils\u003c\/span\u003e\u003cspan\u003e ramp up fast and hold their flavour longer than standard wire builds, according to Geekvape's coil testing\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003ePush-to-fit coil swaps\u003c\/span\u003e\u003cspan\u003e take seconds. No threading, no guessing whether it is seated properly\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003e810 wide bore drip tip\u003c\/span\u003e\u003cspan\u003e suits big, open-lung DTL pulls and pairs well with high-VG liquid\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eStainless steel construction\u003c\/span\u003e\u003cspan\u003e shrugs off the odd knock that would crack a cheaper plastic tank\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eGeekvape Obelisk C Vape Tank Features\u003c\/span\u003e\u003c\/h2\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eThe Airflow Ring Actually Does Something\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eMost sub-ohm tanks in this price bracket ship with a basic slotted ring that barely changes the draw. The Obelisk C's tri-slotted AFC is genuinely adjustable, wide open for maximum cloud and a looser lung hit, or dialled back for a warmer, more restricted pull. Worth experimenting with both coils to find your sweet spot.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eTwo Coils, Two Very Different Vapes\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe tank ships with both a \u003c\/span\u003e\u003cspan\u003e0.25ohm dual mesh coil\u003c\/span\u003e\u003cspan\u003e rated at \u003c\/span\u003e\u003cspan\u003e45-55W\u003c\/span\u003e\u003cspan\u003e and a \u003c\/span\u003e\u003cspan\u003e0.15ohm single mesh coil\u003c\/span\u003e\u003cspan\u003e rated at \u003c\/span\u003e\u003cspan\u003e80-90W\u003c\/span\u003e\u003cspan\u003e. The dual coil gives a balanced, everyday DTL vape with strong flavour and manageable vapour. The single mesh pushes into proper cloud territory. Start on the dual coil if you are new to sub-ohm tanks, then try the single mesh once you know your mod can handle it.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003ePush-to-Fit, Not Screw-In\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eCoil swaps take one motion: pull the old coil out, press the new one in until it seats. \u003c\/span\u003e\u003cspan\u003ePush-to-fit\u003c\/span\u003e\u003cspan\u003e designs like this reduce the risk of cross-threading a coil, which is a genuinely common way coils get damaged before they even reach the cotton. Fair enough, it also just saves time.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eTop Fill With Dual Ports\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThreaded top-fill with two fill ports means less chance of e-liquid pooling in the wrong place while refilling. Twist the cap, fill, twist it closed. The seal underneath the cap is designed to be leak-resistant even when the tank is on its side in a bag.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eBuilt From Steel, Not Plastic\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eStainless steel construction across the main body. Sub-ohm tanks take more knocks than most, especially if you are swapping coils regularly or carrying the tank loose in a pocket. Steel handles that better than the resin bodies used on cheaper alternatives. Pair it with a\u003c\/span\u003e\u003cspan\u003e\u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/box-mods\"\u003e \u003c\/a\u003e\u003ca title=\"Box Mod\" href=\"https:\/\/piratevapes.co.uk\/collections\/box-mods\" target=\"_blank\"\u003e\u003cstrong\u003eB\u003c\/strong\u003e\u003c\/a\u003e\u003c\/span\u003e\u003ca title=\"Box Mod\" href=\"https:\/\/piratevapes.co.uk\/collections\/box-mods\" target=\"_blank\"\u003e\u003cstrong\u003eox Mod\u003c\/strong\u003e\u003c\/a\u003e\u003cspan\u003e\u003cstrong\u003e \u003c\/strong\u003ethat can comfortably run down to 0.15ohm if you want to use the single mesh coil.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eGeekvape Obelisk C Vape Tank Colours\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eFour finishes. All use the same stainless steel body with a different plating or finish.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e#buttons\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli data-end=\"86\" data-start=\"76\" data-section-id=\"1l1v5i7\"\u003eSilver\u003cspan class=\"PDq2pG_selectionAnchor\" aria-hidden=\"true\"\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"99\" data-start=\"87\" data-section-id=\"a7stb9\"\u003eGunmetal\u003c\/li\u003e\n\u003cli data-end=\"109\" data-start=\"100\" data-section-id=\"t3dqof\"\u003eBlack\u003c\/li\u003e\n\u003cli data-is-last-node=\"\" data-end=\"119\" data-start=\"110\" data-section-id=\"hji6ue\"\u003eRainbow\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eHow to Set Up the Geekvape Obelisk C Vape Tank\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eFive steps. A couple of minutes if the coil is not already fitted.\u003c\/span\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eUnscrew the top cap\u003c\/span\u003e\u003cspan\u003e by turning it anticlockwise to expose the fill ports.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003ePress the S Series coil\u003c\/span\u003e\u003cspan\u003e into the base until it seats firmly. No threading required.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003ePrime the coil\u003c\/span\u003e\u003cspan\u003e with four to five drops of e-liquid directly into the coil's exposed mesh ports.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eFill through the top ports\u003c\/span\u003e\u003cspan\u003e, keeping liquid clear of the central airflow tube, then screw the cap shut.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eLeave the tank to stand for eight minutes\u003c\/span\u003e\u003cspan\u003e before your first draw. Mesh coils need the extra time to fully saturate, and rushing this step on a sub-ohm coil burns the wick almost instantly.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eOnce primed, start at the lower end of the coil's wattage range and work upward until the flavour and vapour balance suits you.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eWhat's in the Geekvape Obelisk C Vape Tank Box\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eOne Obelisk C tank, \u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eone pre-installed \u003c\/span\u003e\u003cspan\u003e0.25ohm dual mesh coil\u003c\/span\u003e\u003cspan\u003e, \u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eone spare \u003c\/span\u003e\u003cspan\u003e0.15ohm single mesh coil\u003c\/span\u003e\u003cspan\u003e, \u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003ea coil removal tool, \u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003ea spare parts pack, \u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eand the user manual. \u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eNo e-liquid, no mod, no battery included.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eBuilt for Sub-Ohm Mods, Not MTL Devices\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe Obelisk C's \u003c\/span\u003e\u003cspan\u003e510 threading\u003c\/span\u003e\u003cspan\u003e fits any standard 510 mod or box mod capable of running down to \u003c\/span\u003e\u003cspan\u003e0.15ohm\u003c\/span\u003e\u003cspan\u003e. It is designed specifically for sub-ohm, direct-to-lung vaping with \u003ca title=\"High-VG E-Liquid\" href=\"https:\/\/piratevapes.co.uk\/collections\/high-vg-e-liquid\" target=\"_blank\"\u003e\u003cstrong\u003eHigh-VG E-Liquid\u003c\/strong\u003e\u003c\/a\u003e at 60% VG or above. This is not a tank for \u003cstrong\u003e\u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/mtl-vape-kits\" title=\"MTL Pod Kits\" target=\"_blank\"\u003eMTL Pod Kits\u003c\/a\u003e \u003c\/strong\u003eor low-wattage pen devices; the airflow and coil resistance are built for cloud production, not a tight cigarette-style draw.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eWhat it does not fit: any device that cannot output at least 45W, and any MTL pod system regardless of thread type. Check your mod's wattage ceiling before ordering replacement\u003c\/span\u003e\u003ca title=\"Geekvape Coils\" href=\"https:\/\/piratevapes.co.uk\/collections\/geekvape-coils\" target=\"_blank\"\u003e\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eGeekvape Coils\u003c\/strong\u003e\u003c\/a\u003e\u003cspan\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eAbout Geekvape\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003e\u003cstrong\u003eGeekvape \u003c\/strong\u003ebuilt its name on rugged, performance-focused hardware, and the Obelisk line sits firmly in that tradition. The \u003cstrong\u003eObelisk C\u003c\/strong\u003e itself is a revision of an earlier \u003cstrong\u003eGeekvape sub-ohm tank\u003c\/strong\u003e, rebuilt around the newer\u003cstrong\u003e \u003c\/strong\u003e\u003c\/span\u003e\u003cstrong\u003eS Series mesh coil\u003c\/strong\u003e\u003cspan\u003e\u003cstrong\u003e \u003c\/strong\u003eplatform for faster ramp-up and longer-lasting flavour. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eGeekvape's core strength has always been coil engineering, and the dual and single mesh options on the Obelisk C reflect that: two genuinely different vaping experiences from the same tank body, rather than one coil dressed up as two.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eStock Up and Save\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eMesh coils on a \u003cstrong\u003esub-ohm tank \u003c\/strong\u003edo not last as long as \u003cstrong\u003eMTL coils\u003c\/strong\u003e, especially on the 0.15ohm single mesh at higher wattage. Grabbing a spare pack of S Series coils alongside the tank means you are not caught short mid-week. Pick up a bottle of\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003ehigh VG e-liquid\u003c\/strong\u003e\u003cspan\u003e at the same time, and you have everything sorted in one order. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eEvery order from \u003c\/span\u003e\u003cstrong\u003ePirate Vapes\u003c\/strong\u003e\u003cspan\u003e\u003cstrong\u003e \u003c\/strong\u003eships same day before 4 pm in padded packaging. TPD compliant stock, age-verified checkout, over-18s only. Free Pirate Post on orders over £25.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eConclusion\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe\u003cstrong\u003e Obelisk C \u003c\/strong\u003eis a genuinely adjustable sub-ohm tank at a fair price point, with two coil options that cover both balanced flavour-chasing and serious cloud production. It has tri-slotted airflow, push-to-fit coils, and a stainless steel build that holds up to daily use. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eIf you want a DTL tank that does not force you into a single vaping style, this is worth a look. Browse the full range of\u003c\/span\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/vape-tanks\"\u003e \u003c\/a\u003e\u003ca title=\"Vape Tanks\" href=\"https:\/\/piratevapes.co.uk\/collections\/vape-tanks\" target=\"_blank\"\u003eVape Tanks\u003c\/a\u003e\u003c\/strong\u003e\u003cspan\u003e and\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003evape accessories\u003c\/span\u003e\u003cspan\u003e, or head back to\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003ePirate Vapes\u003c\/strong\u003e\u003cspan\u003e for more from the \u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/geekvape-vapes\" target=\"_blank\" title=\"Geekvape Range\" rel=\"noopener\"\u003e\u003cstrong\u003eGeekvape Range\u003c\/strong\u003e\u003c\/a\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eFAQs\u003c\/span\u003e\u003c\/h2\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eWhat coils fit the Obelisk C?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eGeekvape's \u003c\/span\u003e\u003cspan\u003eS Series mesh coils\u003c\/span\u003e\u003cspan\u003e, either the \u003c\/span\u003e\u003cspan\u003e0.25ohm dual mesh\u003c\/span\u003e\u003cspan\u003e at 45-55W or the \u003c\/span\u003e\u003cspan\u003e0.15ohm single mesh\u003c\/span\u003e\u003cspan\u003e at 80-90W. Both come included in the box.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eIs this tank suitable for MTL vaping?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eNo. The Obelisk C is a \u003c\/span\u003e\u003cspan\u003esub-ohm DTL tank\u003c\/span\u003e\u003cspan\u003e built for open-lung draws and high-VG liquid. For a tighter, cigarette-style draw, look at an MTL tank instead.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eWhat e-liquid should I use?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eHigh-VG e-liquid, ideally \u003c\/span\u003e\u003cspan\u003e60% VG or above\u003c\/span\u003e\u003cspan\u003e. Sub-ohm mesh coils are not designed for 50\/50 blends and will not wick properly with thinner liquid.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eHow often do the coils need replacing?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eRoughly every one to two weeks with regular use, sooner on the 0.15ohm coil if you are running it near the top of its wattage range. Flavour dropping off is the usual sign it is time to swap.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eDoes the Obelisk C fit any mod?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eAny mod with \u003c\/span\u003e\u003cspan\u003e510 threading\u003c\/span\u003e\u003cspan\u003e that can output at least \u003c\/span\u003e\u003cspan\u003e45W\u003c\/span\u003e\u003cspan\u003e, ideally with a range up to 90W to make use of both included coils.\u003c\/span\u003e\u003c\/p\u003e","brand":"Geekvape","offers":[{"title":"Silver","offer_id":52544002916634,"sku":null,"price":17.95,"currency_code":"GBP","in_stock":true},{"title":"Gunmetal","offer_id":52544002949402,"sku":null,"price":17.95,"currency_code":"GBP","in_stock":true},{"title":"Black","offer_id":52544002982170,"sku":null,"price":17.95,"currency_code":"GBP","in_stock":true},{"title":"Rainbow","offer_id":52544003014938,"sku":null,"price":17.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0995\/5675\/3690\/files\/Geekvape_Obelisk_C_Vape_Tank.jpg?v=1784356080"},{"product_id":"hellvape-dead-rabbit-3-rta-tank","title":"Hellvape Dead Rabbit 3 RTA Tank","description":"\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eHellvape Dead Rabbit 3 RTA Tank\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003e\u003cstrong\u003eRebuildable\u003c\/strong\u003e, not \u003cstrong\u003eprefilled \u003c\/strong\u003ewith disposable coils: the \u003c\/span\u003e\u003cstrong\u003eHellvape Dead Rabbit 3 RTA\u003c\/strong\u003e\u003cspan\u003e is a \u003cstrong\u003edual-coil build\u003c\/strong\u003e deck at \u003cstrong\u003e25mm diameter\u003c\/strong\u003e, paired with an internal honeycomb and slotted airflow structure that \u003cstrong\u003eHellvape \u003c\/strong\u003esays prevents leaking entirely while keeping flavour sharp. A postless deck makes dual coil builds straightforward, and the quarter-turn top cap means refilling does not mean stripping the tank down. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eEight finishes are available, and the \u003cstrong\u003e2ml TPD Edition \u003c\/strong\u003ekeeps things UK-compliant. This is a build-your-own atomiser: no coils are included, and it suits vapers already comfortable wiring and wicking their own setups. TPD compliant. Over 18s only.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eWhy vapers choose this:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eGenuinely leak-resistant design.\u003c\/span\u003e\u003cspan\u003e Hellvape built the internal airflow around a honeycomb and slotted structure specifically to stop leaking, not just to reduce it.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003ePostless deck.\u003c\/span\u003e\u003cspan\u003e Dual coil builds without wrestling posts and screws, which matters if you are newer to RTAs or just want fewer fiddly parts.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eQuarter-turn refills.\u003c\/span\u003e\u003cspan\u003e No unscrewing the whole top section every time the tank runs low.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eEight finishes.\u003c\/span\u003e\u003cspan\u003e From stainless steel through to Rainbow and Purple, there is a genuine range here rather than two or three token colourways.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eA proper 2ml TPD option.\u003c\/span\u003e\u003cspan\u003e Compliant capacity for UK sale, not an import workaround.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eHellvape Dead Rabbit 3 RTA Tank Features\u003c\/span\u003e\u003c\/h2\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eHoneycomb Airflow, Not Just a Bigger Hole\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eMost leak complaints on RTAs come down to airflow design rather than the coil itself. Hellvape's structure routes air through the bottom and side of the coil via an internal honeycomb and slotted pattern, delivering full atomisation with a smooth draw and dense vapour while keeping e-liquid where it belongs.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eA Deck Built for Fewer Mistakes\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe postless deck accepts dual coil builds without the usual post-and-screw fiddling. If your last RTA build ended in a short or a loose wrap, this removes a lot of the usual failure points.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eQuarter Turn, Not Full Strip-Down\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eRefilling is a quarter turn of the top cap rather than unscrewing the whole chamber. Quicker top-ups mid-session, and less risk of e-liquid ending up somewhere it shouldn't.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eAn 810 Tip That Suits the Airflow\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe 810 drip tip is sized to match the tank's higher airflow ceiling, giving a fuller draw that complements the honeycomb structure rather than choking it back down.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eHellvape Dead Rabbit 3 RTA Tank Colours\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eEight finishes, all sharing the same 25mm body and postless deck.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e#buttons\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli data-end=\"160\" data-start=\"135\" data-section-id=\"11r20sk\"\u003eS.S (Stainless Steel)\u003cspan class=\"PDq2pG_selectionAnchor\" aria-hidden=\"true\"\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"176\" data-start=\"161\" data-section-id=\"ioxona\"\u003eMatte Black\u003c\/li\u003e\n\u003cli data-end=\"197\" data-start=\"177\" data-section-id=\"18e9xo5\"\u003eMatte Full Black\u003c\/li\u003e\n\u003cli data-end=\"210\" data-start=\"198\" data-section-id=\"a7stb9\"\u003eGunmetal\u003c\/li\u003e\n\u003cli data-end=\"219\" data-start=\"211\" data-section-id=\"1xca97s\"\u003eGold\u003c\/li\u003e\n\u003cli data-end=\"228\" data-start=\"220\" data-section-id=\"1vm4tva\"\u003eBlue\u003c\/li\u003e\n\u003cli data-end=\"240\" data-start=\"229\" data-section-id=\"1ur2b3a\"\u003eRainbow\u003c\/li\u003e\n\u003cli data-is-last-node=\"\" data-end=\"249\" data-start=\"241\" data-section-id=\"2yo8g6\"\u003ePurple\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eHow to Build and Set Up the Hellvape Dead Rabbit 3 RTA\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThis is a rebuildable atomiser. You will need coil wire and cotton, sold separately, and prior building experience is genuinely useful.\u003c\/span\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eRemove the top cap\u003c\/span\u003e\u003cspan\u003e and lift the tank section away to expose the postless deck.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eInstall your coils\u003c\/span\u003e\u003cspan\u003e into the deck's postless terminals, trimming leads before tightening.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003ePulse the coils\u003c\/span\u003e\u003cspan\u003e on a regulated device to check for hot spots or shorts before wicking.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eWick with cotton\u003c\/span\u003e\u003cspan\u003e, trimming ends so they sit just clear of the airflow without blocking it.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eReassemble and fill\u003c\/span\u003e\u003cspan\u003e through the quarter-turn top cap.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eLet the cotton saturate for a few minutes\u003c\/span\u003e\u003cspan\u003e, then fire at a low wattage and increase gradually, checking for leaks or dry hits.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eWhat's in the Hellvape Dead Rabbit 3 RTA Tank Box\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eThe RTA body in your selected finish, \u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003espare glass or resin sections, \u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eand a spares kit for the postless deck. \u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eNo coil wire, no cotton, and no\u003c\/span\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/vape-batteries\"\u003e \u003c\/a\u003e\u003ca title=\"Vape Batteries\" href=\"https:\/\/piratevapes.co.uk\/collections\/vape-batteries\" target=\"_blank\"\u003eVape Batteries\u003c\/a\u003e\u003c\/strong\u003e\u003cspan\u003e\u003cstrong\u003e \u003c\/strong\u003eor mod included.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eBuilt for Standard 510 Mods, Not One Specific Device\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe \u003cstrong\u003eDead Rabbit 3\u003c\/strong\u003e uses a standard 510 connection, so it pairs with most regulated and mechanical\u003c\/span\u003e\u003ca title=\"Box Mods\" href=\"https:\/\/piratevapes.co.uk\/collections\/box-mods\" target=\"_blank\"\u003e \u003cstrong\u003eB\u003c\/strong\u003e\u003c\/a\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/box-mods\"\u003e\u003cstrong\u003eox \u003c\/strong\u003eMods\u003c\/a\u003e\u003c\/strong\u003e\u003cspan\u003e rather than being locked to a single platform. If your mod takes a 510-threaded atomiser and you build your own coils, this tank will fit.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eIt is not a beginner pod kit replacement. There are no \u003cstrong\u003eprebuilt coil\u003c\/strong\u003e options, so if you would rather not wire your own builds, a\u003cstrong\u003e \u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/prefilled-pod-kits\" target=\"_blank\" title=\" Prefilled Pod Kit \" rel=\"noopener\"\u003ePrefilled Pod Kit \u003c\/a\u003e\u003c\/strong\u003eor factory-coil tank is the better fit.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eAbout Hellvape\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003e\u003cstrong\u003eHellvape \u003c\/strong\u003ebuilt its name on the original Dead Rabbit RDA, one of the most widely referenced flavour-focused rebuildables in the category. The \u003cstrong\u003eDead Rabbit 3 RTA\u003c\/strong\u003e carries that flavour-first philosophy into a tank format, adding a leak-resistant honeycomb airflow structure and a postless deck aimed at making dual coil builds more approachable.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eStock Up and Save\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eA \u003cstrong\u003erebuildable tank \u003c\/strong\u003erewards having spares on hand: extra glass sections, a second set of build supplies, and a couple of\u003c\/span\u003e\u003cstrong\u003e 810 Drip Tips\u003c\/strong\u003e\u003cspan\u003e\u003cstrong\u003e \u003c\/strong\u003ein case one gets knocked about. Every order from \u003c\/span\u003e\u003cstrong\u003ePirate Vapes\u003c\/strong\u003e\u003cspan\u003e is dispatched the same day before 4 pm, with an age-verified checkout and TPD-compliant stock throughout. Over 18s only.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eConclusion\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe \u003cstrong\u003eDead Rabbit 3 RTA\u003c\/strong\u003e pairs\u003cstrong\u003e Hellvape's flavour-focused reputation \u003c\/strong\u003ewith a genuinely \u003cstrong\u003eleak-resistant airflow\u003c\/strong\u003e structure and a deck built to remove some of the usual rebuilding friction. It is not for anyone who wants to unbox and vape straight away, but if you already build your own coils, this is a well-specified\u003cstrong\u003e 25mm RTA\u003c\/strong\u003e in eight finishes. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eBrowse more vape tanks and\u003c\/span\u003e\u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/dtl-tanks\" target=\"_blank\" title=\"DTL Tanks,\" rel=\"noopener\"\u003e\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eDTL Tanks\u003c\/strong\u003e\u003c\/a\u003e\u003cspan\u003e, or head to vape accessories for drip tips and build supplies. For everything else,\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003ePirate Vapes\u003c\/strong\u003e\u003cspan\u003e has the full range.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eFAQs\u003c\/span\u003e\u003c\/h2\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eDoes this tank come with coils fitted?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eNo. This is a rebuildable atomiser. You build your own coils using wire and cotton, sold separately.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eWhat is the e-liquid capacity?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003e2ml\u003c\/span\u003e\u003cspan\u003e in the UK TPD Edition stocked here. A larger 3.5ml\/5.5ml capacity exists internationally but is not in this listing.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eWhat size drip tip does it use?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eAn \u003c\/span\u003e\u003cspan\u003e810\u003c\/span\u003e\u003cspan\u003e drip tip, included.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eWill this fit my mod?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eAny mod with a standard \u003c\/span\u003e\u003cspan\u003e510 connection\u003c\/span\u003e\u003cspan\u003e will accept this tank.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eIs this suitable for a first RTA?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe postless deck makes building easier than many RTAs, but you will still need the basics of coil building and wicking. Not a true beginner product.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eHow do I stop it leaking?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eCorrect wicking is the biggest factor. Trim cotton close to the juice channels without overpacking, and make sure the top cap is fully seated after refilling.\u003c\/span\u003e\u003c\/p\u003e","brand":"Hellvape","offers":[{"title":"Best Colour","offer_id":52544107512090,"sku":null,"price":22.99,"currency_code":"GBP","in_stock":true},{"title":"S.S (Stainless Steel)","offer_id":52544107544858,"sku":null,"price":22.99,"currency_code":"GBP","in_stock":true},{"title":"Matte Black","offer_id":52544107577626,"sku":null,"price":22.99,"currency_code":"GBP","in_stock":true},{"title":"Matte Full Black","offer_id":52544107610394,"sku":null,"price":22.99,"currency_code":"GBP","in_stock":true},{"title":"Gunmetal","offer_id":52544107643162,"sku":null,"price":22.99,"currency_code":"GBP","in_stock":true},{"title":"Gold","offer_id":52544107675930,"sku":null,"price":22.99,"currency_code":"GBP","in_stock":true},{"title":"Blue","offer_id":52544107708698,"sku":null,"price":22.99,"currency_code":"GBP","in_stock":true},{"title":"Rainbow","offer_id":52544107741466,"sku":null,"price":22.99,"currency_code":"GBP","in_stock":true},{"title":"Purple","offer_id":52544107774234,"sku":null,"price":22.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0995\/5675\/3690\/files\/Hellvape_Dead_Rabbit_3_RTA_Tank.jpg?v=1784356681"},{"product_id":"geekvape-zeus-nano-tank","title":"Geekvape Zeus Nano Tank","description":"\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eGeekvape Zeus Nano Tank\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eA sub-ohm tank that actually does both styles properly. The \u003c\/span\u003e\u003cstrong\u003eGeekvape Zeus Nano\u003c\/strong\u003e\u003cspan\u003e holds \u003c\/span\u003e\u003cspan\u003e2ml\u003c\/span\u003e\u003cspan\u003e of e-liquid within the\u003cstrong\u003e UK's TPD limit\u003c\/strong\u003e, runs on \u003cstrong\u003eGeekvape's \u003c\/strong\u003e\u003c\/span\u003e\u003cspan\u003e\u003cstrong\u003eB Series\u003c\/strong\u003e mesh coils\u003c\/span\u003e\u003cspan\u003e, and switches between a tight MTL draw and a proper DTL cloud depending on which coil you fit. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eTwo resistances are included in the box, adjustable top airflow lets you fine-tune either style, and the whole thing fills from the top so refills take seconds rather than minutes. Built with 510 threading, so it drops onto most standard mods without an adapter. Stocked in Gold and Rainbow at \u003c\/span\u003e\u003cstrong\u003ePirate Vapes\u003c\/strong\u003e\u003cspan\u003e. Over 18s only.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eWhy vapers choose this:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eOne tank, two vaping styles.\u003c\/span\u003e\u003cspan\u003e Swap the coil and you get \u003cstrong\u003eMTL \u003c\/strong\u003eor \u003cstrong\u003eDTL \u003c\/strong\u003efrom the same body, no need for two separate tanks.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eGeekvape's B Series mesh coils.\u003c\/span\u003e\u003cspan\u003e Sharper flavour and a longer coil life than the older round-wire coils this replaced.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eAdjustable top airflow.\u003c\/span\u003e\u003cspan\u003e Dial the draw in without hunting for a bottom ring buried under your mod.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eGenuinely quick refills.\u003c\/span\u003e\u003cspan\u003e Top-fill design means you are not stripping the tank down every time the tank runs low.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003e510 threaded.\u003c\/span\u003e\u003cspan\u003e Fits onto the vast majority of standard mods without needing an adapter.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eGeekvape Zeus Nano Tank Features\u003c\/span\u003e\u003c\/h2\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eB Series Mesh, Not the Old Round Wire\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eGeekvape's older tanks ran round-wire coils that heated unevenly and lost flavour quickly. The \u003c\/span\u003e\u003cspan\u003eB Series mesh coils\u003c\/span\u003e\u003cspan\u003e in this tank spread heat across a flat surface instead, which means more consistent vapour and a coil that holds its flavour for longer before it needs changing. Not a small upgrade, honestly, once you have used both back to back.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eTwo Coils, Two Completely Different Vapes\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe included \u003c\/span\u003e\u003cspan\u003e0.4ohm\u003c\/span\u003e\u003cspan\u003e coil runs at 25 to 33W and is built for denser, warmer DTL clouds. The \u003c\/span\u003e\u003cspan\u003e0.6ohm\u003c\/span\u003e\u003cspan\u003e sits at 15 to 25W and gives a tighter, cooler pull closer to MTL. Fair enough to want both depending on the mood, and this tank lets you switch between them rather than buying a second device.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eAirflow You Can Actually Reach\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe adjustable airflow ring sits at the top of the tank rather than tucked away at the base. Quick to reach, quick to adjust mid-vape, and it works whether you are running the tight 0.6ohm setup or opened up for the 0.4ohm.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eTop-Fill Without the Faff\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003ePull the drip tip, tip liquid in through the top port, done. No unscrewing the base, no risk of flooding the airflow slots underneath. If you have used an older bottom-fill \u003cstrong\u003eGeekvape tank\u003c\/strong\u003e, this is the upgrade you have been waiting for.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eBuilt to Actually Fit Your Mod\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003e510 threading covers most box mods and pod mods on the market. Check our \u003c\/span\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/vape-tanks\" target=\"_blank\" title=\" Vape Tanks \" rel=\"noopener\"\u003eVape Tanks\u003c\/a\u003e\u003c\/strong\u003e\u003cspan\u003e range if you are shopping for a device to pair it with, since the \u003cstrong\u003eZeus Nano\u003c\/strong\u003e is sold as a tank only.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eGeekvape Zeus Nano Tank Colours\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eTwo finishes in the store picker, both metallic and vibrant. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003e#buttons\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\"\u003eGold\u003c\/li\u003e\n\u003cli dir=\"ltr\"\u003eRainbow\u003cspan\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eHow to Set Up the Geekvape Zeus Nano Tank\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eA few minutes from box to first draw.\u003c\/span\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eUnscrew\u003c\/span\u003e\u003cspan\u003e the top cap and remove the pre-installed coil packaging if fitted for transit.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eChoose your coil.\u003c\/span\u003e\u003cspan\u003e Fit the 0.6ohm for MTL or the 0.4ohm for DTL, and press it firmly into the base until snug.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003ePrime\u003c\/span\u003e\u003cspan\u003e the coil with two to three drops of e-liquid directly onto the visible mesh through the airflow slots.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eFill\u003c\/span\u003e\u003cspan\u003e the tank via the top-fill port, stopping just below the max fill line.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eLet it rest for eight minutes\u003c\/span\u003e\u003cspan\u003e before your first draw, giving the mesh time to fully saturate.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eSet your airflow\u003c\/span\u003e\u003cspan\u003e to match your coil choice, tighter for the 0.6ohm and more open for the 0.4ohm, then start vaping.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eWhat's in the Geekvape Zeus Nano Tank Box\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eOne Zeus Nano tank body, a\u003cstrong\u003e 0.4ohm B Series coil\u003c\/strong\u003e, a \u003cstrong\u003e0.6ohm B Series coil\u003c\/strong\u003e, a drip tip, a coil removal tool, a spare parts pack, a spare glass tube, and the user manual. No device and no e-liquid included, so you will need both to get started if this is your first Geekvape tank.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eRuns on Any 510 Device, MTL or DTL\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe\u003cstrong\u003e Zeus Nano's 510 \u003c\/strong\u003econnection means it fits onto the great majority of box mods and pod mods without an adapter. Whether you pair it with a dedicated MTL device or a higher-wattage mod for DTL clouds depends entirely on which coil you have fitted. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eBrowse \u003c\/span\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/dtl-tanks\" target=\"_blank\" title=\"DTL Tanks \" rel=\"noopener\"\u003eDTL Tanks\u003c\/a\u003e\u003c\/strong\u003e\u003cspan\u003e\u003cstrong\u003e \u003c\/strong\u003eif cloud production is the priority, or\u003cstrong\u003e \u003c\/strong\u003e\u003c\/span\u003e\u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/mtl-tanks\" target=\"_blank\" title=\"MTL Tanks\" rel=\"noopener\"\u003e\u003cstrong\u003eMTL Tanks\u003c\/strong\u003e\u003c\/a\u003e\u003cspan\u003e if you are after that tighter, cigarette-style draw instead. What it will not do is fit proprietary pod systems that use their own snap-in cartridges rather than standard 510 threading.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eAbout Geekvape\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003e\u003cstrong\u003eGeekvape \u003c\/strong\u003ebuilt its name on rugged, performance-focused hardware, and the \u003cstrong\u003eZeus range\u003c\/strong\u003e sits among its most established tank families. The \u003cstrong\u003eB Series mesh coil\u003c\/strong\u003e platform used here has replaced round-wire coils across most of Geekvape's current tank lineup, chosen for the flavour and longevity gains mesh heating brings over older designs. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe Nano trims the original Zeus down to a smaller, lighter footprint while keeping the same coil ecosystem, which means spares are easy to find and cross-compatible with other \u003cstrong\u003eB Series tanks\u003c\/strong\u003e in the range.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eStock Up and Save\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eMesh coils wear faster than you expect once you are running a tank daily, especially at the higher end of the 0.4ohm's wattage range. Keeping a couple of spare \u003cstrong\u003eB Series coils \u003c\/strong\u003ein the drawer means you are never caught out mid-week. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003e\u003cstrong\u003ePirate Vapes\u003c\/strong\u003e \u003c\/span\u003e\u003cspan\u003edispatches every order the same day before 4pm, with age-verified checkout throughout. All stock is TPD compliant and restricted to over 18s only, with Free Pirate Post on orders over £25.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eConclusion\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe \u003cstrong\u003eGeekvape Zeus Nano Tank\u003c\/strong\u003e earns its place by doing two jobs well instead of one job brilliantly. Fit the 0.6ohm for a tighter MTL pull or the \u003cstrong\u003e0.4ohm\u003c\/strong\u003e for genuine DTL clouds, adjust the top airflow to match, and refill through the top without any of the usual faff. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eMesh coils, 510 threading, and two colourways that do not look like everyone else's tank. Check our\u003cstrong\u003e \u003c\/strong\u003e\u003c\/span\u003e\u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/geekvape-coils\" target=\"_blank\" title=\"Geekvape Coils\" rel=\"noopener\"\u003e\u003cstrong\u003eGeekvape Coils\u003c\/strong\u003e\u003c\/a\u003e\u003cspan\u003e range for spares once the included pair wear in, browse \u003c\/span\u003e\u003cspan\u003evape accessories\u003c\/span\u003e\u003cspan\u003e for everything else your setup needs, and pick one up at \u003c\/span\u003e\u003cstrong\u003ePirate Vapes\u003c\/strong\u003e\u003cspan\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eFAQs\u003c\/span\u003e\u003c\/h2\u003e\n\u003ch3 dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eDoes this tank do MTL or DTL?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eBoth. Fit the 0.6ohm coil for MTL, or the 0.4ohm for DTL. Same tank, different coil.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eWhat is the actual capacity?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003e2ml\u003c\/span\u003e\u003cspan\u003e in the UK version, which is the TPD limit. Some international listings show 3.5ml, but UK stock is capped at 2ml.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eWill it fit my mod?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eAlmost certainly. It uses standard \u003c\/span\u003e\u003cspan\u003e510 threading\u003c\/span\u003e\u003cspan\u003e, which covers the vast majority of box mods and pod mods sold in the UK.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eHow long do the included coils last?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eTypically one to two weeks with daily use, though the 0.4ohm at higher wattage tends to wear faster than the 0.6ohm.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eDoes it come with spare parts?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eYes. A spare glass tube and a small spare parts pack are included alongside the two coils and coil tool.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eCan I buy replacement coils separately?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eYes, Geekvape B Series coils are sold separately once your originals wear out.\u003c\/span\u003e\u003c\/p\u003e","brand":"Geekvape","offers":[{"title":"Gold","offer_id":52544483426586,"sku":null,"price":17.99,"currency_code":"GBP","in_stock":true},{"title":"Rainbow","offer_id":52544483459354,"sku":null,"price":17.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0995\/5675\/3690\/files\/Geekvape_Zeus_Nano_Tank.jpg?v=1784366338"},{"product_id":"geekvape-obelisk-tank","title":"Geekvape Obelisk Tank","description":"\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eGeekvape Obelisk Tank \u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eA proper sub-ohm tank built for cloud production, not a halfway house between MTL and DTL. The \u003c\/span\u003e\u003cstrong\u003eGeekvape Obelisk\u003c\/strong\u003e\u003cspan\u003e holds \u003c\/span\u003e\u003cstrong\u003e2ml\u003c\/strong\u003e\u003cspan\u003e\u003cstrong\u003e of e-liquid\u003c\/strong\u003e within the \u003cstrong\u003eUK's TPD limit\u003c\/strong\u003e and runs on Geekvape's \u003c\/span\u003e\u003cspan\u003eZ Series mesh coils\u003c\/span\u003e\u003cspan\u003e, with a 0.2ohm rated for 70-80W and a 0.4ohm rated for 50-60W both included in the box. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eStainless steel construction, a child-lock top-fill system, and a dual-slotted bottom airflow ring designed to feed those higher wattages without choking the draw. An 810 wide-bore drip tip comes fitted as standard. Stocked in six finishes at \u003c\/span\u003e\u003cstrong\u003ePirate Vapes\u003c\/strong\u003e\u003cspan\u003e. Over 18s only, and this is strictly a device for mods built to fire sub-ohm coils.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eWhy vapers choose this:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eGenuine sub-ohm performance.\u003c\/span\u003e\u003cspan\u003e The 0.2ohm coil at 70-80W produces serious cloud volume, not a watered-down version of it.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eTwo coils in the box.\u003c\/span\u003e\u003cspan\u003e You are not buying a spare before you have even opened the tank.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eChild-lock top fill.\u003c\/span\u003e\u003cspan\u003e Refills stay contained, and the cap is not something a curious toddler can pop open by accident.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003e810 wide-bore drip tip.\u003c\/span\u003e\u003cspan\u003e Fitted as standard rather than sold separately, which most sub-ohm tanks at this price do not bother with.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eSix colourways.\u003c\/span\u003e\u003cspan\u003e More choice than most replacement tanks offer at this end of the market.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eGeekvape Obelisk Tank Replacement Features\u003c\/span\u003e\u003c\/h2\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eZ Series Mesh, Built for Watts\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003ca title=\"Geekvape's Z Series Coils\" href=\"https:\/\/piratevapes.co.uk\/collections\/geekvape-coils\" target=\"_blank\"\u003e\u003cstrong\u003eGeekvape's Z Series Coils\u003c\/strong\u003e\u003c\/a\u003e\u003cspan\u003e\u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/geekvape-coils\"\u003e \u003c\/a\u003euse a KA1 mesh heating element designed to handle higher wattage without the flavour dropping off after a few tanks. The 0.2ohm variant is rated all the way up to 80W, which is a genuinely high ceiling for a tank this compact. Honestly, most sub-ohm tanks in this price bracket cannot claim the same.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eTwo Coils, One Clear Purpose\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eBoth included coils, the \u003c\/span\u003e\u003cspan\u003e0.2ohm\u003c\/span\u003e\u003cspan\u003e and the \u003c\/span\u003e\u003cspan\u003e0.4ohm\u003c\/span\u003e\u003cspan\u003e, sit at the DTL end of the spectrum. Neither is built for a tight MTL draw. Fair enough if that catches out anyone expecting a hybrid tank: this is built purely for dense, warm clouds and flavour at volume.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eAirflow That Actually Keeps Up\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eHigher wattage needs more air, and Geekvape's dual-slotted bottom airflow ring is sized for exactly that. Open it fully for the 0.2ohm coil's top end, or dial it back when running the cooler 0.4ohm setup.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eA Fill System That Locks\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe top-fill port uses a child-lock mechanism rather than a simple flip cap. Small extra step when refilling, but it means the tank is not something that opens with a light knock in a bag, and it keeps curious hands away from the liquid inside. Worth pairing with a proper high-VG shortfill.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eBuilt Stainless, Not Fragile\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eStainless steel housing around a Pyrex glass section means this tank shrugs off the odd knock that would crack a cheaper plastic tube. Not indestructible, but a genuine step up from entry-level sub-ohm tanks.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eGeekvape Obelisk Tank Replacement Colours\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eSix finishes in the store picker, more than most replacement tanks in this category offer.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e#buttons\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli data-section-id=\"t3dqof\" data-start=\"88\" data-end=\"97\"\u003eBlack\u003cspan aria-hidden=\"true\" class=\"PDq2pG_selectionAnchor\"\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli data-section-id=\"1vm4tva\" data-start=\"98\" data-end=\"106\"\u003eBlue\u003c\/li\u003e\n\u003cli data-section-id=\"1xca97s\" data-start=\"107\" data-end=\"115\"\u003eGold\u003c\/li\u003e\n\u003cli data-section-id=\"a7stb9\" data-start=\"116\" data-end=\"128\"\u003eGunmetal\u003c\/li\u003e\n\u003cli data-section-id=\"1ur2b3a\" data-start=\"129\" data-end=\"140\"\u003eRainbow\u003c\/li\u003e\n\u003cli data-section-id=\"649fkv\" data-start=\"141\" data-end=\"149\" data-is-last-node=\"\"\u003eSilver\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eHow to Set Up the Geekvape Obelisk Tank Replacement\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eA few extra steps compared with a basic tank, thanks to the child-lock fill system.\u003c\/span\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eUnlock and remove\u003c\/span\u003e\u003cspan\u003e the top cap by pressing down while twisting, then set it aside.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eChoose your coil.\u003c\/span\u003e\u003cspan\u003e Press-fit the 0.2ohm for maximum cloud, or the 0.4ohm for a slightly cooler, more controlled draw.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003ePrime\u003c\/span\u003e\u003cspan\u003e the coil with three to four drops of e-liquid directly onto the mesh through the airflow slots before fitting it into the tank.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eFill\u003c\/span\u003e\u003cspan\u003e through the top port to just below the max line, then lock the cap back into place.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eGive it a full ten minutes\u003c\/span\u003e\u003cspan\u003e before your first draw. Sub-ohm mesh at this wattage punishes an unsoaked coil badly.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eStart low and build up.\u003c\/span\u003e\u003cspan\u003e Begin around 50W on the 0.4ohm or 70W on the 0.2ohm, then adjust to taste.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eWhat's in the Geekvape Obelisk Tank Replacement Box\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eOne Obelisk tank body, a 0.2ohm Z Series coil pre-installed, a 0.4ohm Z Series coil as a spare, a coil removal tool, a spare parts pack, and a spare glass tube. No device and no e-liquid, so make sure your mod can handle sub-ohm firing before you order.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eBuilt for Serious Sub-Ohm Mods\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe \u003cstrong\u003eObelisk tank\u003c\/strong\u003e uses a standard\u003cstrong\u003e \u003c\/strong\u003e\u003c\/span\u003e\u003cstrong\u003e510 connection\u003c\/strong\u003e\u003cspan\u003e, so it physically fits the vast majority of box mods on the market. What matters more is whether your mod can actually fire down to 0.2ohm safely. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eCheck your device's minimum resistance rating before fitting the lower coil, since this is not a tank built for entry-level or MTL-focused devices. Browse \u003c\/span\u003e\u003ca title=\"DTL Tanks\" href=\"https:\/\/piratevapes.co.uk\/collections\/dtl-tanks\" target=\"_blank\"\u003e\u003cstrong\u003eDTL Tanks\u003c\/strong\u003e\u003c\/a\u003e\u003cspan\u003e\u003cstrong\u003e \u003c\/strong\u003efor other cloud-focused options if you are still shopping around, or\u003cstrong\u003e \u003c\/strong\u003e\u003c\/span\u003e\u003cstrong\u003e\u003ca title=\"Vape Mods\" href=\"https:\/\/piratevapes.co.uk\/collections\/vape-mods\" target=\"_blank\"\u003eVape Mods\u003c\/a\u003e\u003c\/strong\u003e\u003cspan\u003e\u003cstrong\u003e \u003c\/strong\u003eif you need a device capable of running it properly.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eAbout Geekvape\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eGeekvape built its reputation on rugged, high-output hardware, and the Obelisk sits alongside the brand's \u003cstrong\u003eZeus \u003c\/strong\u003eand \u003cstrong\u003eZ lines\u003c\/strong\u003e as one of its dedicated sub-ohm tanks. The \u003cstrong\u003eZ Series coil platform \u003c\/strong\u003eused here was developed specifically for higher-wattage cloud production, moving away from the lower-power coil designs Geekvape uses across its \u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/mtl-tanks\" target=\"_blank\" title=\"MTL-Focused Tanks\" rel=\"noopener\"\u003e\u003cstrong\u003eMTL-Focused Tanks\u003c\/strong\u003e\u003c\/a\u003e. It is a straightforward proposition: fewer gimmicks, more focus on getting flavour and vapour right at volume.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eStock Up and Save\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eRunning a 0.2ohm coil at 80W burns through a coil faster than a gentler MTL setup ever would, so keeping spares in stock matters more here than with most tanks. \u003c\/span\u003e\u003cspan\u003ePirate Vapes \u003c\/span\u003e\u003cspan\u003edispatches every order the same day before 4pm, with padded packaging that protects the glass in transit. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eAll stock is TPD compliant and age-verified at checkout, restricted to over 18s only throughout.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eConclusion\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe \u003cstrong\u003eGeekvape Obelisk Tank Replacement\u003c\/strong\u003e is built for one job: proper sub-ohm vaping without the compromises smaller hybrid tanks make. Two\u003cstrong\u003e Z Series coils \u003c\/strong\u003ein the box, a genuinely wide wattage range, and a child-lock top-fill system that takes the fuss out of daily use. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eJust make sure your mod is rated for it before you order the lower resistance. Check our\u003cstrong\u003e \u003c\/strong\u003e\u003c\/span\u003e\u003cstrong\u003eGeekvape Coils\u003c\/strong\u003e\u003cspan\u003e range for spares once the included pair wear in, browse \u003c\/span\u003e\u003cspan\u003evape accessories\u003c\/span\u003e\u003cspan\u003e for the rest of your setup, and pick one up at \u003c\/span\u003e\u003cstrong\u003ePirate Vapes\u003c\/strong\u003e\u003cspan\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eFAQs\u003c\/span\u003e\u003c\/h2\u003e\n\u003ch3 dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eIs this an MTL or DTL tank?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eDTL only. Both included coils are sub-ohm and built for cloud and flavour at higher wattage, not a tight cigarette-style draw.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eWhat is the actual UK capacity?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003e2ml\u003c\/span\u003e\u003cspan\u003e, the TPD limit. Some international listings show up to 5.5ml, but UK stock is capped at 2ml.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eWill my mod handle this tank?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eIt fits any 510 connection, but your mod needs to be rated to fire down to 0.2ohm safely. Check your device's minimum resistance before fitting the lower coil.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eHow long do the Z Series coils last?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eTypically one to two weeks with regular use, shorter at the top of the wattage range and longer if you keep to the 0.4ohm coil.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eDoes it come with spare parts?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eYes. A spare glass tube, a small spare parts pack, and a coil tool are all included alongside the two coils.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eCan I buy replacement coils separately?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eYes, Geekvape Z Series coils are sold separately once the included pair wear out.\u003c\/span\u003e\u003c\/p\u003e","brand":"Geekvape","offers":[{"title":"Black","offer_id":52544498827546,"sku":null,"price":16.99,"currency_code":"GBP","in_stock":true},{"title":"Blue","offer_id":52544498860314,"sku":null,"price":16.99,"currency_code":"GBP","in_stock":true},{"title":"Gold","offer_id":52544498893082,"sku":null,"price":16.99,"currency_code":"GBP","in_stock":true},{"title":"Gunmetal","offer_id":52544498925850,"sku":null,"price":16.99,"currency_code":"GBP","in_stock":true},{"title":"Rainbow","offer_id":52544498958618,"sku":null,"price":16.99,"currency_code":"GBP","in_stock":true},{"title":"Silver","offer_id":52544498991386,"sku":null,"price":16.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0995\/5675\/3690\/files\/Geekvape_Obelisk_Tank.jpg?v=1784366965"},{"product_id":"innokin-isub-b-tank","title":"Innokin iSub B Replacement Tank","description":"\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eInnokin iSub B Replacement Tank\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe \u003cstrong\u003eInnokin iSub B\u003c\/strong\u003e is a \u003cstrong\u003e2ml TPD-compliant sub-ohm tank\u003c\/strong\u003e built from stainless steel and Pyrex glass, running \u003cstrong\u003ePlex3D mesh coils \u003c\/strong\u003eat 0.35Ω between 30 and 55W. Sixth generation of the iSub series. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eMicro-grooves cut across the mesh boost surface area for stronger flavour at lower power. Four-point adjustable airflow at the base lets you set the draw from restricted to wide open. Twist the top cap to fill. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eAn automatic flood shield helps prevent juice from flooding the coil while you pour. \u003cstrong\u003ePirate Vapes \u003c\/strong\u003ecarries the iSub B with fast, age-verified UK delivery. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eWhy vapers choose this:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003ePlex3D micro-groove mesh coils are designed to wick high-VG e-liquids efficiently within the recommended wattage range.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eFour-point airflow lets you adjust the draw from restricted direct-to-lung through to a more open direct-to-lung inhale.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eAutomatic flood prevention helps reduce flooding during refills. The cleaner first draws after topping up.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eCompatible with the full Innokin iSub coil range. You are not locked into one option.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eDurable stainless steel and Pyrex glass construction built to handle regular use.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eInnokin iSub B Replacement Tank Features\u003c\/span\u003e\u003c\/h2\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003ePlex3D Mesh Coil Technology\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eMicro-grooves cut perpendicular across the mesh surface. More surface area touching your juice means stronger flavour between 30 and 55W. The coil heats up and cools down quickly, and the Plex3D design is intended to improve flavour output and coil longevity. Wood pulp mixed into the cotton wicking creates capillary action that keeps pace with chain vaping. \u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eAutomatic Flood Prevention\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eUnscrew the top cap, and a spring-loaded piston closes off the juice channels. Fill without worrying about liquid flooding the coil and dripping out of the airflow slots. Screw the cap back on; the piston lifts; wicking resumes. Old-school problem, genuinely clever fix from Innokin's engineering team. \u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eFour-Point Adjustable Airflow\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe base ring has four precision-cut air slots. Wide open delivers unrestricted lung draws with solid cloud output. Tighten the ring progressively, and the draw restricts, giving you a range of direct-to-lung options from a single tank. \u003cstrong\u003ePirate Vapes \u003c\/strong\u003estocks this for DTL vapers who like being able to dial in their airflow without swapping hardware. \u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eOrganic Cotton and Wood-Pulp Wicking\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eInnokin blends organic cotton with wood pulp inside the Plex3D coils. The wood pulp creates capillary action, pulling juice into the mesh faster and more evenly than cotton alone. This helps maintain consistent\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003ee-liquid\u003c\/span\u003e\u003cspan\u003e supply to the coil, even when running thicker juices through the tank. Top up before the glass runs low, and the coil will thank you for it. \u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eTwist-to-Open Top Fill\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eNo sliding mechanisms. No press-fit caps that pop loose in a pocket. Turn the top cap anti-clockwise; it unscrews. Pour juice down the side of the chamber, avoiding the centre airway. Firm, deliberate, and the threading keeps it secure once tightened. The Pyrex glass sits recessed into the base section, sealed with an O-ring for added stability during refills. \u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eInnokin iSub B Replacement Tank Colour Options\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eNo flavour variants on this one because you fill it yourself with whatever juice suits you. The choice here is colour.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e#buttons\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli data-end=\"90\" data-start=\"82\" data-section-id=\"1vm4tva\"\u003eBlue\u003cspan class=\"PDq2pG_selectionAnchor\" aria-hidden=\"true\"\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"100\" data-start=\"91\" data-section-id=\"t3dqof\"\u003eBlack\u003c\/li\u003e\n\u003cli data-end=\"113\" data-start=\"101\" data-section-id=\"a7stb9\"\u003eGunmetal\u003c\/li\u003e\n\u003cli data-is-last-node=\"\" data-end=\"131\" data-start=\"114\" data-section-id=\"17pe31n\"\u003eStainless Steel\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eCertain colour variants feature a rainbow-tinted Pyrex glass section that catches light at different angles. This is listed in Innokin's official product specifications and noted in multiple hands-on reviews, though the effect varies between finishes. Check which colours are currently available in the\u003c\/span\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/vape-tanks\"\u003e \u003c\/a\u003e\u003ca title=\"Vape Tanks\" href=\"https:\/\/piratevapes.co.uk\/collections\/vape-tanks\" target=\"_blank\"\u003eVape Tanks\u003c\/a\u003e\u003c\/strong\u003e\u003cspan\u003e collection.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eHow to Set Up the Innokin iSub B Replacement Tank \u003c\/span\u003e\u003c\/h2\u003e\n\u003col\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eUnscrew the top cap by twisting it anti-clockwise. The flood prevention piston will close the juice channels automatically.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003ePour e-liquid slowly down the inside wall of the glass, avoiding the central airway. Avoid overfilling the tank.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eTighten the top cap back on securely. The piston lifts and wicking begins.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eLeave the tank standing upright for five minutes. Seriously. The coil needs time to soak, and vaping a dry Plex3D coil will ruin it on the first draw.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eAttach the tank to any compatible 510-threaded mod capable of 30 to 55W output.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eAdjust the four-point airflow ring at the base to your preference, then vape.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eWhat's in the Innokin iSub B Replacement Tank Box\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003e1x Innokin iSub B Tank (with 0.35Ω Plex3D coil pre-installed)\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003e1x Spare Plex3D Coil (0.35Ω)\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003e1x Vape Band\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003e1x Spare Glass Section (4ml bubble glass in some versions)\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003e1x Spare O-Ring Set\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003e1x Quick Start Guide\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eNo mod, no battery, no juice. Just the tank, two coils, and the bits you need to keep it running. Grab a bottle of your usual e-liquid and a compatible mod if you do not already own one.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eFits Any 510 Threaded Vape Mod\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eOne tank. One thread. No cross-compatibility headaches. The\u003cstrong\u003e Innokin iSub B\u003c\/strong\u003e uses a standard 510 connection, so it threads onto any regulated mod capable of outputting 30 to 55W. Check your device specs before ordering if you are unsure. On the coil side, the iSub B is compatible with the full Innokin iSub coil range, not just the Plex3D. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThat includes the older 0.5Ω and 2.0Ω iSub heads if you want to experiment with a different draw. The iSub B is designed for use with compatible regulated devices. Browse our\u003c\/span\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/vape-mods\"\u003e \u003c\/a\u003e\u003ca title=\"Vape Mods\" href=\"https:\/\/piratevapes.co.uk\/collections\/vape-mods\" target=\"_blank\"\u003eVape Mods\u003c\/a\u003e\u003c\/strong\u003e\u003cspan\u003e for devices that pair well. \u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eAbout Innokin\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eInnokin has been building vape hardware since 2011. The iSub tank series is one of the most recognised lines in the industry, and the\u003cstrong\u003e iSub B\u003c\/strong\u003e is the sixth generation. What keeps people coming back is consistency. Clean machining, reliable 510 connections, and a coil platform that works across the full iSub range. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe \u003cstrong\u003ePlex3D mesh coils \u003c\/strong\u003ebrought micro-groove technology to the iSub line, focusing on better flavour output at lower wattages. Innokin's replacement\u003c\/span\u003e\u003cspan\u003e \u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/vape-coils\"\u003e\u003cstrong\u003eV\u003c\/strong\u003e\u003c\/a\u003e\u003c\/span\u003e\u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/vape-coils\" target=\"_blank\" title=\"Vape Coils\" rel=\"noopener\"\u003e\u003cstrong\u003eape Coils\u003c\/strong\u003e\u003c\/a\u003e\u003cspan\u003e are sold separately in packs of five, so long-term running costs stay manageable. A dependable name in vaping hardware. \u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eStock Up and Save\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eGrab a spare coil pack alongside the tank so you have replacements ready when needed. \u003cstrong\u003ePirate Vapes \u003c\/strong\u003epacks every order carefully, using secure packaging to help ensure glass tanks arrive safely. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eCheckout is age-verified 18+ delivery only, and all products comply with \u003cstrong\u003eTPD requirements\u003c\/strong\u003e and MHRA regulations. Free Pirate Post is available on orders over £25. The Crow's Nest also allows you to schedule regular deliveries of coils and e-liquid with savings included.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eConclusion\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe \u003cstrong\u003eInnokin iSub B \u003c\/strong\u003eis a solid, no-fuss sub-ohm tank built for\u003cstrong\u003e DTL Vapers \u003c\/strong\u003ewho want decent flavour without running coils at \u003cstrong\u003e80 or 90W\u003c\/strong\u003e. \u003cstrong\u003ePlex3D mesh at 0.35Ω\u003c\/strong\u003e, four-point airflow, automatic flood prevention during fills, and a 510 thread that fits any compatible regulated mod. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eTwo coils in the box get you started, and the full \u003cstrong\u003eInnokin iSub coil \u003c\/strong\u003erange is backwards compatible. Hard to argue with that at this price. Grab one from \u003cstrong\u003ePirate Vapes\u003c\/strong\u003e with fast, age-verified UK delivery. \u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eFAQs\u003c\/span\u003e\u003c\/h2\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eWhat coils does the tank use?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003ePlex3D 0.35Ω mesh coils come in the box. But the tank also works with the full Innokin iSub coil range, including the older 0.5Ω and 2.0Ω options. You are not stuck with one coil type.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eWhat wattage should I vape it at?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003ePlex3D coils run best between 30 and 55W. Start around 35 to 40W and adjust from there. Going above 55W will burn the coil out faster than it should.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eCan I use nic salts in this?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eIt is a sub-ohm tank at 0.35Ω, so nic salts at high strength (10mg or 20mg) will likely be too harsh. Stick to freebase e-liquid or low-strength salts. High-VG juice pairs well with the Plex3D wicking system.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eDoes the glass break easily?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe tank uses Pyrex glass and includes a spare replacement glass section in the box. A silicone vape band is also included for added protection.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eWill this fit my mod?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eIf your mod has a 510 thread and outputs between 30 and 55W, yes. That covers most regulated mods on the market. The iSub B is designed for use with compatible regulated devices.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eHow long does each coil last?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eDepends on your juice and how often you vape. Sweeter liquids gunk the mesh faster. On average, one to three weeks per coil is typical. Clear juice tends to go longer.\u003c\/span\u003e\u003c\/p\u003e","brand":"Innokin","offers":[{"title":"Blue","offer_id":52544526254362,"sku":null,"price":12.99,"currency_code":"GBP","in_stock":true},{"title":"Black","offer_id":52544526287130,"sku":null,"price":12.99,"currency_code":"GBP","in_stock":true},{"title":"Gunmetal","offer_id":52544526319898,"sku":null,"price":12.99,"currency_code":"GBP","in_stock":true},{"title":"Stainless Steel","offer_id":52544526352666,"sku":null,"price":12.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0995\/5675\/3690\/files\/Innokin_iSub_B_Replacement_Tank.jpg?v=1784368457"},{"product_id":"uwell-crown-iv-sub-ohm-tank","title":"Uwell Crown IV Sub Ohm Tank","description":"\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eUwell Crown IV Sub Ohm Tank\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eCondensation pools around the base of a tank and slowly drips down onto your mod. If you have used sub-ohm tanks for any length of time, you know how that goes. \u003cstrong\u003eUwell \u003c\/strong\u003eintroduced the \u003cstrong\u003eCrown IV \u003c\/strong\u003ewith a patented self-cleaning system that captures condensation in a dedicated chamber and recycles it back into the atomiser. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003e28mm diameter. \u003cstrong\u003e2ml UK TPD\u003c\/strong\u003e capacity. Dual adjustable bottom airflow. Stainless steel body with hand-polished finish. The Crown line is four generations deep now, and Pirate Vapes stocks this one in six colours with genuine \u003cstrong\u003eUwell coils\u003c\/strong\u003e and age-verified UK delivery. \u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eWhy vapers choose this:\u003c\/span\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eSelf-cleaning technology that captures condensation and recycles it back through the coil, reducing leaks and liquid waste.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eLeak-proof design with a dedicated condensation chamber that keeps your mod and 510 connection clean.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003ePro-FOCS dual air intake recycles air through the coil core twice for richer, more saturated flavour.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eSS904L coil wire offers improved corrosion resistance and is designed for a longer service life than conventional SS316L.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eDouble Helix Mesh Coil option (UN2) for enhanced surface area and even heating.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eQuarter-turn top fill. One motion to open, one motion to close.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eHand-polished stainless steel body with knurled grip sections and a gold-plated 510 contact pin.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eCompatible with High VG e-liquids for dense, smooth vapour production.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eBeginner-friendly setup with plug-and-pull coil installation and easy-to-use top-filling design.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eUwell Crown IV Sub Ohm Tank Features\u003c\/span\u003e\u003c\/h2\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eSelf-Cleaning Technology\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eCondensation collects at the base of most sub-ohm tanks over time. The Crown IV uses a dedicated condensation chamber that absorbs excess liquid and feeds it back into the atomiser on your next draw. Less mess around the 510 connection. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eLess juice sitting in a puddle going nowhere. Uwell calls it self-cleaning, and based on how other Crown tanks handled condensation, the improvement is noticeable. The result is a leak-proof design that keeps your mod cleaner for longer.  \u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003ePro-FOCS Flavour System\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003ePro Flavour Core Optimisation System. Uwell routes air through the atomiser core twice before it reaches you. The double pass helps deliver richer flavour and denser vapour with each draw. A redesigned chimney and internal airflow structure also contribute, giving smoother airflow than earlier Crown models. Pair it with a quality e-liquid from our\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/e-liquids\"\u003e\u003cstrong\u003eE-Liquids\u003c\/strong\u003e\u003c\/a\u003e\u003cspan\u003e\u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/e-liquids\" title=\"E-Liquids Collection\" target=\"_blank\"\u003e\u003cstrong\u003e Collection\u003c\/strong\u003e\u003c\/a\u003e, and the improvement comes through quickly. \u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eQuarter-Turn Top Fill\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003ePush down, twist 90 degrees, fill through the dual ports, twist back. The locking mechanism helps prevent accidental opening during everyday use. No threading, no repeated turns. Fill time is a few seconds. The top filling design is beginner-friendly and easy to use, making it a solid choice for vapers of all experience levels. \u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eSS904L Coil Range\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eFour coil options in the Crown IV family. The 0.4Ω and 0.2Ω Dual SS904L ship in the box. SS904L offers improved corrosion resistance compared to SS316L, so coils are designed for a longer service life and flavour stays cleaner over time. The 0.25Ω UN1 and 0.23Ω UN2 Double Helix Mesh coils are sold separately from our\u003cstrong\u003e \u003c\/strong\u003e\u003c\/span\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/vape-coils\" title=\"Vape Coil\" target=\"_blank\"\u003eVape Coil\u003c\/a\u003e\u003c\/strong\u003e\u003cspan\u003e range. The Double Helix Mesh coil provides greater surface area for more even heating and enhanced flavour. \u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eHand-Polished Build Quality\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eStainless steel body. Pyrex glass section. Gold-plated 510 pin at the base. Top and bottom edges are knurled for grip, and the whole tank is hand-polished. 55g total, 54.8mm tall. Not tiny for a sub-ohm tank, but it is not going to weigh your mod setup down either. The finish holds up well over daily use. \u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eUwell Crown IV Sub Ohm Tank Colour Options\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThis is a tank, not a prefilled pod. You fill it with your own e-liquid, so there is no flavour selection here. The choice is colour. Pirate Vapes stocks the Crown IV in six finishes. Same hand-polished stainless steel body and Pyrex glass on all of them. Just pick whichever one works with your mod.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e#buttons\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli data-end=\"116\" data-start=\"107\" data-section-id=\"t3dqof\"\u003eBlack\u003cspan class=\"PDq2pG_selectionAnchor\" aria-hidden=\"true\"\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"136\" data-start=\"117\" data-section-id=\"4dldyj\"\u003eStainless Steel\u003c\/li\u003e\n\u003cli data-end=\"145\" data-start=\"137\" data-section-id=\"1vm4tva\"\u003eBlue\u003c\/li\u003e\n\u003cli data-end=\"155\" data-start=\"146\" data-section-id=\"whto2b\"\u003eGreen\u003c\/li\u003e\n\u003cli data-end=\"166\" data-start=\"156\" data-section-id=\"uh14xy\"\u003ePurple\u003c\/li\u003e\n\u003cli data-is-last-node=\"\" data-end=\"187\" data-start=\"167\" data-section-id=\"1ms39fe\"\u003eIridescent Rainbow\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eHow to Set Up the Uwell Crown IV Sub-Ohm Tank\u003c\/span\u003e\u003c\/h2\u003e\n\u003col\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eRemove the pre-installed 0.4Ω coil from its packaging seal, or open the spare 0.2Ω coil if you want higher wattage.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003ePush the coil firmly into place in the base of the tank. No threading needed. The plug-and-pull system does the work.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003ePrime the coil by dropping e-liquid directly onto the exposed cotton through the juice ports. Three to four drops per port is enough.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003ePush down on the top cap and twist 90 degrees counter-clockwise to unlock the fill section.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eFill through either of the dual ports. Do not pour liquid into the centre airflow hole. Leave a small gap at the top.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eTwist the top cap back 90 degrees clockwise to lock it. You will feel it stop.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eStand the tank upright for five to ten minutes. Let the cotton soak fully before you fire it. Skipping this step is the fastest way to burn out a fresh coil.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eScrew the tank onto your mod's 510 connection and set the wattage to the range printed on your coil.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eStart at the lower end of the wattage range and work up to taste.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eWhat's in the Uwell Crown IV Sub Ohm Tank Box\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003e1x Uwell Crown IV 2ml Vape Tank\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003e1x 0.4 Ohm Crown IV Coil (pre-installed)\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003e1x 0.2 Ohm Crown IV Coil\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003e1x User Manual\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003e1x Pack of Spare O-Rings\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003e1x Spare Glass Tube\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eCompatible With Most 510-Threaded Mods \u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe Crown IV uses a standard 510 connection with a gold-plated contact pin. It is compatible with most regulated mods featuring a 510 thread that fire sub-ohm atomisers. 28mm base diameter, so most modern box mods handle it without overhang. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eCompatible coils include the 0.4Ω, 0.2Ω, 0.25Ω, and 0.23Ω mesh, all on the same plug-and-pull fitment. \u003ca title=\"High VG Freebase\" href=\"https:\/\/piratevapes.co.uk\/collections\/high-vg-e-liquid\" target=\"_blank\"\u003e\u003cstrong\u003eHigh VG Freebase \u003c\/strong\u003e\u003c\/a\u003ee-liquids at 3mg or 6mg work best at these wattage ranges. Browse our\u003cstrong\u003e \u003c\/strong\u003e\u003c\/span\u003e\u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/vape-tanks\" title=\"Vape Tanks\" target=\"_blank\"\u003e\u003cstrong\u003eVape Tanks\u003c\/strong\u003e\u003c\/a\u003e\u003cspan\u003e collection for other sub-ohm options. \u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eAbout Uwell\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eUwell started out making sub-ohm tanks and got known for one thing above all: flavour. The original Crown set a benchmark back in 2015 that competitors spent years chasing. Four generations later, the Crown IV brought self-cleaning, SS904L coils, and build quality that holds up against tanks at twice the price. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThen the Caliburn pod line took the same engineering into a completely different segment and became one of the most popular pod kits in the UK. Pirate Vapes stocks the full Uwell range, from Crown tanks to Caliburn pods. \u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eStock Up and Save\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eMost users replace Crown IV coils every one to two weeks, depending on e-liquid, wattage, and how often they vape. Sweeter juices gunk things up faster. Having a spare pack around means you are never stuck with a dead coil and nothing to replace it with. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003e\u003cstrong\u003ePirate Vapes\u003c\/strong\u003e ships genuine\u003cstrong\u003e \u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/uwell-vapes\" target=\"_blank\" title=\"Uwell Products\" rel=\"noopener\"\u003eUwell Products\u003c\/a\u003e \u003c\/strong\u003eonly, packed with care and dispatched with tracking. Checkout is age-verified, over-18s delivery only, and every product sold meets UK TPD requirements. Orders over £25 qualify for Free Pirate Post across the UK. \u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eConclusion\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eFour generations of Crown sub-ohm tanks led to this. The self-cleaning base, leak-proof design, Pro-FOCS flavour system, Double Helix Mesh coil compatibility, and \u003cstrong\u003eSS904L coils\u003c\/strong\u003e help address common concerns with sub-ohm vaping: condensation, flavour consistency, and coil longevity. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eBeginner-friendly and easy to use, the Crown IV fits most 510 mods, takes four different coil types, and comes in six colour finishes. It is designed for \u003cstrong\u003ehigh-VG e-liquids \u003c\/strong\u003ewhile only requiring routine coil replacement and basic maintenance. Grab one from \u003cstrong\u003ePirate Vapes\u003c\/strong\u003e with fast, age-verified UK delivery. \u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eFAQs\u003c\/span\u003e\u003c\/h2\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eWhat coils does this tank use?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003ePlug-and-pull Crown IV coils. Four options. The 0.4Ω and 0.2Ω Dual SS904L come in the box. The 0.25Ω UN1 and 0.23Ω UN2 Double Helix Mesh coils are sold separately. No threading, just push and pull.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eWill this fit my mod?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eCompatible with most regulated mods that have a 510 connection and fire sub-ohm coils. 28mm base diameter fits most box mods without overhang.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eCan I use nic salts in this?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eNot a great idea. Sub-ohm tanks push a lot of vapour and throat hit. Running nic salts at 10mg or 20mg through a sub-ohm coil is going to be far too harsh for most people. Stick to 3mg or 6mg freebase.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eHow do I reduce condensation?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe self-cleaning system handles most of it internally. Beyond that, close the airflow when you are filling the tank, make sure the top cap is locked after filling, and do not overfill past the max line.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eHow often should I replace the coil?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eMost users go through a coil every one to two weeks, depending on their e-liquid, wattage, and usage. When the flavour goes flat or slightly papery, swap it.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eDoes the UK version come with bubble glass?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eNo. The UK TPD version ships with a straight 2ml glass and one spare. Bubble glass tanks designed for the US market hold 5ml or 6ml and are not TPD-compliant for UK sale.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eIs this tank beginner-friendly?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eYes. The plug-and-pull coil system, quarter-turn top fill, and adjustable airflow make it easy to set up and use, even for vapers new to sub-ohm tanks.\u003c\/span\u003e\u003c\/p\u003e","brand":"Uwell","offers":[{"title":"Black","offer_id":52544649265434,"sku":null,"price":8.99,"currency_code":"GBP","in_stock":true},{"title":"Stainless Steel","offer_id":52544649298202,"sku":null,"price":8.99,"currency_code":"GBP","in_stock":true},{"title":"Blue","offer_id":52544649330970,"sku":null,"price":8.99,"currency_code":"GBP","in_stock":true},{"title":"Green","offer_id":52544649363738,"sku":null,"price":8.99,"currency_code":"GBP","in_stock":true},{"title":"Purple","offer_id":52544649396506,"sku":null,"price":8.99,"currency_code":"GBP","in_stock":true},{"title":"Iridescent Rainbow","offer_id":52544649429274,"sku":null,"price":8.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0995\/5675\/3690\/files\/Uwell_Crown_IV_Sub_Ohm_Tank.jpg?v=1784376025"},{"product_id":"horizontech-falcon-2-tank","title":"HorizonTech Falcon 2 Replacement Tank","description":"\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eHorizonTech Falcon 2 Replacement Tank\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eA \u003c\/span\u003e\u003cstrong\u003e25mm sub-ohm tank\u003c\/strong\u003e\u003cspan\u003e\u003cstrong\u003e \u003c\/strong\u003ewith a conical mesh coil rated at\u003cstrong\u003e \u003c\/strong\u003e\u003c\/span\u003e\u003cstrong\u003e0.14ohm\u003c\/strong\u003e\u003cspan\u003e and a recommended wattage of \u003c\/span\u003e\u003cspan\u003e70 to 75W\u003c\/span\u003e\u003cspan\u003e. The\u003cstrong\u003e HorizonTech Falcon 2 \u003c\/strong\u003eis built for \u003cstrong\u003eDTL vapers \u003c\/strong\u003ewho want dense clouds and strong flavour from a tank that can handle serious power. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003e2ml TPD-compliant capacity\u003c\/span\u003e\u003cspan\u003e, stainless steel body, reinforced\u003cstrong\u003e Pyrex glass\u003c\/strong\u003e, resin widebore drip tip, and a slide-to-fill top cap that keeps refills clean. Two \u003c\/span\u003e\u003cstrong\u003eSector Mesh coils\u003c\/strong\u003e\u003cspan\u003e in the box, one already installed. Compatible with any\u003c\/span\u003e\u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/vape-mods\" target=\"_blank\" title=\" Vape Mod \" rel=\"noopener\"\u003e\u003cspan\u003e \u003cstrong\u003eV\u003c\/strong\u003e\u003c\/span\u003e\u003cstrong\u003eape Mod\u003c\/strong\u003e\u003c\/a\u003e\u003cspan\u003e\u003cstrong\u003e \u003c\/strong\u003ethat runs a \u003c\/span\u003e\u003cstrong\u003e510 thread\u003c\/strong\u003e\u003cspan\u003e and outputs at least 70W. Five colour options. Over 18s only.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eWhy vapers choose the Falcon 2 Tank:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eConical mesh coil architecture\u003c\/span\u003e\u003cspan\u003e compresses vapour through a tapered structure before it reaches your mouth, concentrating flavour density in a way flat mesh does not replicate\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003ePush-fit coil changes\u003c\/span\u003e\u003cspan\u003e take seconds, no threading, no cross-threading, no tools needed\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eSlide-to-fill top cap\u003c\/span\u003e\u003cspan\u003e reveals a wide juice port that accepts most bottle nozzles without removing the tank from your mod\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eWood pulp and cotton wicking\u003c\/span\u003e\u003cspan\u003e feeds liquid faster than standard cotton alone, which matters at 70W+\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eFive finishes\u003c\/span\u003e\u003cspan\u003e and a 25mm base that fits comfortably on most modern box mods without overhang\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eHorizonTech Falcon 2 Replacement Tank Features\u003c\/span\u003e\u003c\/h2\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eThe Conical Mesh Design Changes How Flavour Reaches You\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eMost mesh coils lay flat. The Falcon 2 Sector Mesh coil is shaped like a cone, narrowing toward the top. That taper compresses the vapour path and forces more contact between the heated mesh and your e-liquid before the vapour exits through the drip tip. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003ePractically speaking? You get a warmer, denser, more flavour-forward draw than a standard flat mesh coil at the same wattage. The difference is noticeable from the first fill.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003ePush-Fit Coils: No More Cross-Threading\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eHorizonTech ditched the screw-in coil design from the original Falcon. The Falcon 2 uses a push-and-pull system. You grip the spent coil, pull it out, and push the fresh one into the base until it clicks. No rotating, no risk of stripping threads, no alignment issues. Clean hands, ten-second swap. It is genuinely one of the fastest coil changes on any\u003c\/span\u003e\u003cspan\u003e\u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/vape-tanks\"\u003e \u003c\/a\u003e\u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/vape-tanks\" target=\"_blank\" title=\"Sub-Ohm Vape Tank\" rel=\"noopener\"\u003e\u003cstrong\u003eS\u003c\/strong\u003e\u003c\/a\u003e\u003c\/span\u003e\u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/vape-tanks\" target=\"_blank\" title=\"Sub-Ohm Vape Tank\" rel=\"noopener\"\u003e\u003cstrong\u003eub-Ohm Vape Tank\u003c\/strong\u003e\u003c\/a\u003e\u003cspan\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eThat Wood Pulp Wicking, Though\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eCotton wicking is standard. HorizonTech adds wood pulp fibre to the cotton in their Sector Mesh coils, and the combination wicks faster and more consistently than cotton alone. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eAt \u003c\/span\u003e\u003cspan\u003e70 to 75W\u003c\/span\u003e\u003cspan\u003e, a pure cotton wick can struggle to keep up during chain vaping. The blended material absorbs and delivers liquid quicker, which reduces dry hits and keeps flavour stable even when you are pulling back-to-back draws.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eSlide-to-Fill Top Cap Keeps Things Simple\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eNo unscrewing. No removing the tank from your mod. Press the top cap, slide it open, and a large fill port appears. Fill with your preferred\u003c\/span\u003e\u003cspan\u003e\u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/high-vg-e-liquid\"\u003e \u003c\/a\u003e\u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/high-vg-e-liquid\" target=\"_blank\" title=\"High VG E-liquid\" rel=\"noopener\"\u003e\u003cstrong\u003eH\u003c\/strong\u003e\u003c\/a\u003e\u003c\/span\u003e\u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/high-vg-e-liquid\" target=\"_blank\" title=\"High VG E-liquid\" rel=\"noopener\"\u003e\u003cstrong\u003eigh VG E-liquid\u003c\/strong\u003e\u003c\/a\u003e\u003cspan\u003e, slide it shut. The mechanism locks flush and holds its seal. Refilling while driving, walking, or otherwise busy becomes significantly less awkward with this system.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eDual-Slotted Bottom Airflow Does Its Job\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eTwo slots on the base ring control the draw. Open them fully for a wide, airy DTL hit with maximum cloud output. Close them partially for a warmer, more restricted draw with slightly more flavour concentration. The airflow ring turns smoothly and stays where you set it. Nothing revolutionary, but it works reliably and does not loosen in your pocket.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eHorizonTech Falcon 2 Replacement Tank Colours\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eFive finishes. All use the same stainless steel and Pyrex glass construction with a colour-matched aesthetic.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e#buttons\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli data-section-id=\"hji6ue\" data-start=\"25\" data-end=\"34\"\u003eRainbow\u003cspan aria-hidden=\"true\" class=\"PDq2pG_selectionAnchor\"\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli data-section-id=\"16y13v3\" data-start=\"35\" data-end=\"42\"\u003eBlack\u003c\/li\u003e\n\u003cli data-section-id=\"649fkv\" data-start=\"43\" data-end=\"51\"\u003eSilver\u003c\/li\u003e\n\u003cli data-section-id=\"1j420ty\" data-start=\"52\" data-end=\"58\"\u003eBlue\u003c\/li\u003e\n\u003cli data-section-id=\"1p4facj\" data-start=\"59\" data-end=\"70\"\u003eRose Gold\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eHow to Set Up the HorizonTech Falcon 2 Replacement Tank\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eQuick assembly. The push-fit system means you can go from box to vaping in under five minutes.\u003c\/span\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eIf a coil is not already installed, take a \u003c\/span\u003e\u003cspan\u003eSector Mesh 0.14ohm coil\u003c\/span\u003e\u003cspan\u003e from the box and push it firmly into the base of the tank until it clicks into position. You will feel it seat.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eApply \u003c\/span\u003e\u003cspan\u003efour to five drops of e-liquid\u003c\/span\u003e\u003cspan\u003e directly onto the exposed cotton visible through the coil's wicking ports. Rotate the coil and add a couple more drops to each side. The wood pulp cotton is denser than standard wicking, so do not rush this step.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eSlide open the top cap, fill the tank with \u003c\/span\u003e\u003cspan\u003ehigh VG e-liquid\u003c\/span\u003e\u003cspan\u003e (70\/30 or higher recommended) to just below the fill line, and close the cap until it clicks shut.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eAttach the tank to your mod via the \u003c\/span\u003e\u003cspan\u003e510 thread\u003c\/span\u003e\u003cspan\u003e. Hand-tighten only.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eLeave the tank upright for a full eight minutes.\u003c\/span\u003e\u003cspan\u003e The blended wood pulp wicking material absorbs at a different rate than pure cotton, and it needs those extra minutes to fully saturate from the base upward. Firing the coil before the wick is soaked will char the wood pulp permanently, and the burnt taste does not recover.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eSet your mod to \u003c\/span\u003e\u003cspan\u003e60W\u003c\/span\u003e\u003cspan\u003e and take three to four gentle draws. Increase to \u003c\/span\u003e\u003cspan\u003e70W\u003c\/span\u003e\u003cspan\u003e over the next few puffs and settle into the \u003c\/span\u003e\u003cspan\u003e70 to 75W\u003c\/span\u003e\u003cspan\u003e sweet spot.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eWhat's in the HorizonTech Falcon 2 Replacement Tank Box\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eOne Falcon 2 tank with a pre-installed \u003c\/span\u003e\u003cspan\u003e0.14ohm Sector Mesh coil\u003c\/span\u003e\u003cspan\u003e, \u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eone spare coil in the same resistance, \u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003ea user manual, \u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eand a warranty card. \u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eNo e-liquid, no mod. You will also need\u003c\/span\u003e\u003cspan\u003e\u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/replacement-tank-glass\"\u003e \u003c\/a\u003e\u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/replacement-tank-glass\" target=\"_blank\" title=\"Replacement Tank Glass\" rel=\"noopener\"\u003e\u003cstrong\u003eR\u003c\/strong\u003e\u003c\/a\u003e\u003c\/span\u003e\u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/replacement-tank-glass\" target=\"_blank\" title=\"Replacement Tank Glass\" rel=\"noopener\"\u003e\u003cstrong\u003eeplacement Tank Glass\u003c\/strong\u003e\u003c\/a\u003e\u003cspan\u003e if you want a backup Pyrex section.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eBuilt for Any 510 Mod That Reaches 70W\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe \u003c\/span\u003e\u003cspan\u003e510 gold-plated connection\u003c\/span\u003e\u003cspan\u003e on the \u003cstrong\u003eFalcon 2\u003c\/strong\u003e fits the vast majority of regulated box mods on the market. Anything from a single-battery 80W device to a dual-battery\u003cstrong\u003e 200W+ mod\u003c\/strong\u003e will work. The 25mm base diameter sits flush on most modern mods without overhang.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eWhat matters more than the mod itself is the power output. The \u003c\/span\u003e\u003cstrong\u003e0.14ohm Sector Mesh coil\u003c\/strong\u003e\u003cspan\u003e is rated for \u003c\/span\u003e\u003cspan\u003e70 to 75W\u003c\/span\u003e\u003cspan\u003e. Some users run it as low as 60W with decent results, but the coil was engineered for the 70W range, and that is where the flavour peaks. If your mod only outputs 40 or 50W, this is not the right tank for your setup.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eNot compatible with MTL devices, pod kits, or pen-style batteries. This is a sub-ohm tank that needs sub-ohm power. The\u003c\/span\u003e\u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/horizontech-coils\"\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/a\u003e\u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/horizontech-coils\" target=\"_blank\" title=\"HorizonTech Coils\" rel=\"noopener\"\u003e\u003cstrong\u003eHorizonTech Coils\u003c\/strong\u003e\u003c\/a\u003e\u003cspan\u003e are exclusive to the Falcon 2 and do not fit the original Falcon, Falcon King, or any other \u003cstrong\u003eHorizonTech tank\u003c\/strong\u003e. Each generation uses its own coil platform.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eAbout HorizonTech\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe Falcon line put \u003cstrong\u003eHorizonTech \u003c\/strong\u003eon the map. The original Falcon won multiple best-tank awards across vaping expos and review sites, largely because of how effectively the mesh coils delivered flavour at the time. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe Falcon 2 carried that forward with the Sector Mesh design: a conical mesh structure paired with wood pulp and cotton wicking that addressed the biggest complaints about the original coil's lifespan. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eHorizonTech has stuck with this formula rather than chasing trends, and the Falcon 2 remains a popular choice among sub-ohm vapers who prioritise flavour density over feature lists.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eStock Up and Save\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe Falcon 2 ships with two coils, but once those are spent, you will want fresh ones ready. At 70W with daily use, each coil lasts roughly one to two weeks depending on how sweet your e-liquid runs. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003ePicking up a spare pack of \u003c\/span\u003e\u003cspan\u003ePirate Vapes\u003c\/span\u003e\u003cspan\u003e coils alongside the tank means you are covered for your first month without a second order. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eAll stock is TPD compliant, checkout is age-verified, and every order is for over-18s only. Same-day dispatch before 4 pm, padded packaging to protect the Pyrex during transit.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eConclusion\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe \u003cstrong\u003eFalcon 2 \u003c\/strong\u003edoes one thing and does it well: high-wattage sub-ohm flavour from a conical mesh coil that compresses vapour for a denser draw than flat mesh alternatives. Push-fit coil swaps, slide-to-fill refills, and solid stainless steel construction keep the experience straightforward. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eIf your mod reaches 70W and you vape DTL, the Falcon 2 deserves a look. Browse more HorizonTech tanks and\u003c\/span\u003e\u003cspan\u003e\u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/vape-accessories\"\u003e \u003c\/a\u003e\u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/vape-accessories\" target=\"_blank\" title=\"Vape Accessories\" rel=\"noopener\"\u003e\u003cstrong\u003eV\u003c\/strong\u003e\u003c\/a\u003e\u003c\/span\u003e\u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/vape-accessories\" target=\"_blank\" title=\"Vape Accessories\" rel=\"noopener\"\u003e\u003cstrong\u003eape Accessories\u003c\/strong\u003e\u003c\/a\u003e\u003cspan\u003e at\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003ePirate Vapes\u003c\/strong\u003e\u003cspan\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eFAQs\u003c\/span\u003e\u003c\/h2\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eWhat coils fit the Falcon 2?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eOnly the \u003c\/span\u003e\u003cspan\u003eHorizonTech Falcon 2 Sector Mesh 0.14ohm\u003c\/span\u003e\u003cspan\u003e coils. They push-fit into the base. The original Falcon coils, Falcon King coils, and any other HorizonTech coils from previous tanks will not fit. Each generation runs its own platform.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eDoes the Falcon 2 work for MTL vaping?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eNo. The \u003c\/span\u003e\u003cspan\u003e0.14ohm\u003c\/span\u003e\u003cspan\u003e coil at \u003c\/span\u003e\u003cspan\u003e70 to 75W\u003c\/span\u003e\u003cspan\u003e is a DTL setup. If you want a mouth-to-lung draw, you need a different tank entirely.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eWhat e-liquid ratio works best?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003e70\/30 VG\/PG or higher.\u003c\/span\u003e\u003cspan\u003e The wicking ports are sized for thicker liquids, and the wattage is too high for thin 50\/50 blends. Sub-ohm vaping at this power with high-nicotine e-liquid will be harsh, so stick to \u003c\/span\u003e\u003cspan\u003e3mg or 6mg freebase\u003c\/span\u003e\u003cspan\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eHow long do the Falcon 2 coils last?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eOne to two weeks with daily use at the recommended \u003c\/span\u003e\u003cspan\u003e70 to 75W\u003c\/span\u003e\u003cspan\u003e. Sweeter e-liquids shorten that. Keeping the tank topped up and avoiding dry hits extends coil life noticeably.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eCan I use the Falcon 2 on a pen-style battery?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eNot realistically. Pen batteries rarely output more than 25 to 30W. The Falcon 2 needs \u003c\/span\u003e\u003cspan\u003e70W minimum\u003c\/span\u003e\u003cspan\u003e to perform properly. A regulated box mod is the right pairing for this tank.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eWhat is the Falcon 2 e-liquid capacity?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003e2ml\u003c\/span\u003e\u003cspan\u003e under UK TPD regulations. The tank was designed with a larger international capacity, but all UK-sold units are limited to the \u003c\/span\u003e\u003cspan\u003e2ml\u003c\/span\u003e\u003cspan\u003e standard.\u003c\/span\u003e\u003c\/p\u003e","brand":"HorizonTech","offers":[{"title":"Rainbow","offer_id":52594532876570,"sku":null,"price":19.99,"currency_code":"GBP","in_stock":true},{"title":"Black","offer_id":52594532909338,"sku":null,"price":19.99,"currency_code":"GBP","in_stock":true},{"title":"Silver","offer_id":52594532942106,"sku":null,"price":19.99,"currency_code":"GBP","in_stock":true},{"title":"Blue","offer_id":52594532974874,"sku":null,"price":19.99,"currency_code":"GBP","in_stock":true},{"title":"Rose Gold","offer_id":52594533007642,"sku":null,"price":19.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0995\/5675\/3690\/files\/HorizonTech_Falcon_2_Replacement_Tank.jpg?v=1785156565"},{"product_id":"freemax-fireluke-2-vape-tank","title":"FreeMax Fireluke 2 Vape Tank","description":"\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eFreeMax Fireluke 2 Tank\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eA \u003cstrong\u003e28mm sub-ohm tank\u003c\/strong\u003e with \u003c\/span\u003e\u003cspan\u003e\u003cstrong\u003e2ml TPD-compliant \u003c\/strong\u003ecapacity\u003c\/span\u003e\u003cspan\u003e, built around \u003cstrong\u003eFreeMax's TX mesh coil series\u003c\/strong\u003e and a wicking formula you will not find anywhere else: \u003c\/span\u003e\u003cspan\u003e90% tea tree fibre blended with 10% organic cotton\u003c\/span\u003e\u003cspan\u003e. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThat is not marketing. It genuinely changes how the coil handles heat and flavour clarity compared to standard cotton builds. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003e\u003cstrong\u003eTwo coils included: \u003c\/strong\u003ea \u003c\/span\u003e\u003cspan\u003eTX2 mesh at 0.2ohm running 40-80W\u003c\/span\u003e\u003cspan\u003e pre-installed in the tank, and a spare \u003c\/span\u003e\u003cspan\u003eTX1 mesh at 0.15ohm rated 40-90W\u003c\/span\u003e\u003cspan\u003e. Slide-to-open top fill, dual slotted bottom airflow, \u003c\/span\u003e\u003cspan\u003e810 wide bore drip tip\u003c\/span\u003e\u003cspan\u003e, and a \u003c\/span\u003e\u003cspan\u003e510 thread\u003c\/span\u003e\u003cspan\u003e that fits any regulated mod in your collection. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eFourteen colour options in the store picker. Over 18s only. Browse the full range of\u003c\/span\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/dtl-tanks\" target=\"_blank\" title=\" Sub-Ohm Tanks \" rel=\"noopener\"\u003e Sub-Ohm Tanks\u003c\/a\u003e\u003c\/strong\u003e\u003cspan\u003e\u003cstrong\u003e \u003c\/strong\u003eat Pirate Vapes.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eWhy vapers choose this:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eTea tree fibre wicking is a genuine differentiator.\u003c\/span\u003e\u003cspan\u003e FreeMax's patented 90\/10 blend absorbs liquid faster and more evenly than pure cotton, which means longer coil life and cleaner flavour retention across the final days of a coil's run\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eTwo mesh coils in the box.\u003c\/span\u003e\u003cspan\u003e The 0.2ohm handles most vapers, and the 0.15ohm pushes warmer clouds for those who run their mods higher. Both are ready to go out of the box.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eSlide-to-open top fill keeps things clean.\u003c\/span\u003e\u003cspan\u003e No unscrewing, no threads to cross, no drip tip removal. Slide the cap, fill, slide it back.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eFourteen finishes.\u003c\/span\u003e\u003cspan\u003e From understated stainless to graffiti prints, which is more variety than most sub-ohm tanks offer at any price\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003e510 thread with broad mod compatibility.\u003c\/span\u003e\u003cspan\u003e Sits comfortably on anything from a single-battery stick to a dual-18650\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003ebox mod\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eFreeMax Fireluke 2 Tank Features\u003c\/span\u003e\u003c\/h2\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eThat Tea Tree Fibre Wicking, Though\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eFreeMax calls it a 90\/10 tea tree fibre and organic cotton blend. Derived from natural tea tree products, the fibre absorbs liquid faster and holds up to sustained heat better than standard cotton. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eYour coil stays saturated more consistently at higher wattages, and the flavour does not go stale as quickly towards the end of the coil's useful life. It sounds niche, but once you have run a tank with this wicking, going back to pure cotton feels noticeably different.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eWhy the Diamond-Pattern Mesh Matters\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe TX mesh coils inside the\u003cstrong\u003e Fireluke 2\u003c\/strong\u003e use a diamond-shaped mesh weave rather than the standard flat or hexagonal patterns most manufacturers use. The diamond shape distributes heat across a wider, more uniform surface area. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eMore even heating means fewer hot spots, which in turn means the wicking degrades more slowly and the flavour stays consistent. FreeMax has used mesh coils for years, and this is the refined version.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eDual Slotted Airflow at the Base\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eTwo wide airflow slots sit at the bottom of the tank. Fully open, the draw is loose and airy for a \u003cstrong\u003edirect lung \u003c\/strong\u003ehit with dense cloud output. Close them halfway, and the draw tightens noticeably. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eAll the way down, you get something approaching a restricted DTL draw with more concentrated flavour. The adjustment ring clicks into place cleanly, so it does not shift in your pocket. Worth pairing with a\u003c\/span\u003e\u003cspan\u003e\u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/70-30-shortfills\"\u003e \u003c\/a\u003e\u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/high-vg-e-liquid\" target=\"_blank\" title=\"High VG Shortfill\" rel=\"noopener\"\u003e\u003cstrong\u003eH\u003c\/strong\u003e\u003c\/a\u003e\u003c\/span\u003e\u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/high-vg-e-liquid\" target=\"_blank\" title=\"High VG Shortfill\" rel=\"noopener\"\u003e\u003cstrong\u003eigh VG Shortfill\u003c\/strong\u003e\u003c\/a\u003e\u003cspan\u003e for the best cloud performance.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eSlide-to-Open Top Fill\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003ePush the top cap sideways, and the fill port opens. No threading, no unscrewing the drip tip, no removing the tank from the mod. Fill through the wide port, slide the cap back, and you are done. It is one of the faster refill mechanisms on any sub-ohm tank, and the silicone seal underneath keeps liquid locked in. Messy refills are not an issue here.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003e360-Degree E-Liquid Feeding\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe internal coil housing channels liquid from all directions into the wicking material simultaneously. Not from one side, not from two ports. The entire circumference feeds the wick. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThat matters most when chain vaping, because the wick re-saturates between draws faster than designs that rely on gravity and two small feed holes. Fewer dry hits, especially at the higher end of the wattage range.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eFreeMax Fireluke 2 Tank Colours\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eFourteen finishes. A mix of solid metallic options and graffiti-patterned editions that stand out on a mod. All colours use the same stainless steel and glass construction underneath.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e#buttons\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli data-section-id=\"hji6ue\" data-start=\"39\" data-end=\"48\"\u003eRainbow\u003cspan aria-hidden=\"true\" class=\"PDq2pG_selectionAnchor\"\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli data-section-id=\"1o4swr\" data-start=\"49\" data-end=\"54\"\u003eRed\u003c\/li\u003e\n\u003cli data-section-id=\"1j420ty\" data-start=\"55\" data-end=\"61\"\u003eBlue\u003c\/li\u003e\n\u003cli data-section-id=\"1j442so\" data-start=\"62\" data-end=\"68\"\u003eGold\u003c\/li\u003e\n\u003cli data-section-id=\"16y13v3\" data-start=\"69\" data-end=\"76\"\u003eBlack\u003c\/li\u003e\n\u003cli data-section-id=\"1o4gk2\" data-start=\"77\" data-end=\"82\"\u003eAsh\u003c\/li\u003e\n\u003cli data-section-id=\"170hor7\" data-start=\"83\" data-end=\"90\"\u003eGreen\u003c\/li\u003e\n\u003cli data-section-id=\"2yo8g6\" data-start=\"91\" data-end=\"99\"\u003ePurple\u003c\/li\u003e\n\u003cli data-section-id=\"jvigrk\" data-start=\"100\" data-end=\"111\"\u003eStainless\u003c\/li\u003e\n\u003cli data-section-id=\"h4zkun\" data-start=\"112\" data-end=\"128\"\u003eGraffiti Black\u003c\/li\u003e\n\u003cli data-section-id=\"1e0xd86\" data-start=\"129\" data-end=\"144\"\u003eGraffiti Blue\u003c\/li\u003e\n\u003cli data-section-id=\"1tfpo8o\" data-start=\"145\" data-end=\"162\"\u003eGraffiti Orange\u003c\/li\u003e\n\u003cli data-section-id=\"a4jc2j\" data-start=\"163\" data-end=\"177\"\u003eGraffiti Red\u003c\/li\u003e\n\u003cli data-section-id=\"6y5gp7\" data-start=\"178\" data-end=\"200\"\u003eGraffiti Space Black\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eHow to Set Up the FreeMax Fireluke 2 Tank\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eNew tank, new coil routine. Give this five minutes, and you will be set.\u003c\/span\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eUnbox and inspect.\u003c\/span\u003e\u003cspan\u003e The TX2 0.2ohm mesh coil comes pre-installed. Check the coil is seated properly by looking through the base of the tank.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003ePrime the coil.\u003c\/span\u003e\u003cspan\u003e Drip \u003c\/span\u003e\u003cspan\u003efour to five drops of e-liquid\u003c\/span\u003e\u003cspan\u003e directly onto the exposed cotton through the top of the coil and one drop into each of the side wicking ports. Spread the liquid across the cotton evenly.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eReassemble the tank.\u003c\/span\u003e\u003cspan\u003e Screw the glass section and top cap back together if separated. Ensure the base is finger-tight on your mod.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eFill through the slide-to-open top.\u003c\/span\u003e\u003cspan\u003e Push the top cap to the side, tilt your bottle into the fill port, and fill to just below the max line. Avoid the central airflow chimney.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eWait a full seven minutes.\u003c\/span\u003e\u003cspan\u003e The tea tree fibre blend needs longer than standard cotton to fully saturate from every angle. Do not rush this. A burnt TX mesh coil is finished permanently, and they are not cheap to waste.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eStart at the lower end of the wattage range.\u003c\/span\u003e\u003cspan\u003e Begin at \u003c\/span\u003e\u003cspan\u003e40W\u003c\/span\u003e\u003cspan\u003e and increase gradually over five to ten puffs. Let the coil break in before pushing towards the upper limit.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eWhat's in the FreeMax Fireluke 2 Tank Box\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe TPD edition box includes: \u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eThe Fireluke 2 tank with the \u003c\/span\u003e\u003cspan\u003eTX2 mesh coil at 0.2ohm\u003c\/span\u003e\u003cspan\u003e pre-installed, \u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eone spare \u003c\/span\u003e\u003cspan\u003eTX1 mesh coil at 0.15ohm\u003c\/span\u003e\u003cspan\u003e, \u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003ea set of replacement O-rings, \u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eand a user manual. \u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eNo e-liquid, no mod, no batteries. You will need a compatible 510-threaded mod and your choice of\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003ee-liquid\u003c\/span\u003e\u003cspan\u003e to get started.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eThe DTL Tank That Fits Any 510 Mod\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe \u003cstrong\u003eFireluke 2\u003c\/strong\u003e uses a standard\u003cstrong\u003e \u003c\/strong\u003e\u003c\/span\u003e\u003cstrong\u003e510 thread\u003c\/strong\u003e\u003cspan\u003e, which means it connects to virtually every regulated\u003c\/span\u003e\u003cspan\u003e\u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/vape-mods\"\u003e \u003c\/a\u003e\u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/vape-mods\" target=\"_blank\" title=\"Vape Mod\" rel=\"noopener\"\u003e\u003cstrong\u003eV\u003c\/strong\u003e\u003c\/a\u003e\u003c\/span\u003e\u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/vape-mods\" target=\"_blank\" title=\"Vape Mod\" rel=\"noopener\"\u003e\u003cstrong\u003eape Mod\u003c\/strong\u003e\u003c\/a\u003e\u003cspan\u003e on the market. Single-battery mods, dual-battery setups, and compact stick-style devices that output at least 40W will all drive the\u003cstrong\u003e TX coils\u003c\/strong\u003e properly. The \u003c\/span\u003e\u003cspan\u003e28mm diameter\u003c\/span\u003e\u003cspan\u003e sits flush on most modern mods without overhang.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003e\u003cstrong\u003eWhat it does not fit:\u003c\/strong\u003e pod systems, proprietary pod mods without a 510 connection, or unregulated mechanical mods (the TX coils are designed for regulated output only). If your mod has a \u003cstrong\u003e510 connector\u003c\/strong\u003e and can push 40W or above, you are good.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eAbout FreeMax\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eFreeMax built its reputation on one thing: coil technology. The tea tree fibre wicking formula that runs through the \u003cstrong\u003eFireluke 2\u003c\/strong\u003e is patented, and it was a genuine step forward when it launched. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eBefore tea tree fibre, most sub-ohm coils relied entirely on organic cotton, which degrades faster under sustained heat. FreeMax's blend addressed that directly, and the TX mesh coil series became one of the more respected coil platforms in the DTL sub-ohm space. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe Fireluke line, from the original Fireluke M through to the Fireluke 4, has been a consistent performer in the UK market. Browse the full\u003c\/span\u003e\u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/freemax-coils\"\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/a\u003e\u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/freemax-coils\" target=\"_blank\" title=\"FreeMax Coil Range\" rel=\"noopener\"\u003e\u003cstrong\u003eFreeMax Coil Range\u003c\/strong\u003e\u003c\/a\u003e\u003cspan\u003e if you need spares.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eStock Up and Save\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe Fireluke 2 ships with two coils, but at daily DTL use you will burn through a coil every one to two weeks depending on liquid sweetness and wattage. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eGrabbing a \u003cstrong\u003efive-pack of TX mesh replacements\u003c\/strong\u003e alongside the tank means you are covered for the first couple of months without reordering. A spare\u003c\/span\u003e\u003cspan\u003e\u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/replacement-tank-glass\"\u003e \u003c\/a\u003e\u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/replacement-tank-glass\" target=\"_blank\" title=\"Replacement Glass\" rel=\"noopener\"\u003e\u003cstrong\u003eR\u003c\/strong\u003e\u003c\/a\u003e\u003c\/span\u003e\u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/replacement-tank-glass\" target=\"_blank\" title=\"Replacement Glass\" rel=\"noopener\"\u003e\u003cstrong\u003eeplacement Glass\u003c\/strong\u003e\u003c\/a\u003e\u003cspan\u003e is worth adding too, because bubble glass and hard surfaces do not mix. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eAll stock is TPD compliant, with age-verified checkout and over-18s only. \u003c\/span\u003e\u003cstrong\u003ePirate Vapes\u003c\/strong\u003e\u003cspan\u003e ships same-day before 4 pm in padded packaging. Free Pirate Post on orders over £25.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eConclusion\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe \u003cstrong\u003eFreeMax Fireluke 2 \u003c\/strong\u003eis a proper \u003cstrong\u003eDTL sub-ohm tank\u003c\/strong\u003e with a wicking system that genuinely performs differently from standard cotton builds. Two TX mesh coils included, slide-to-open refilling, adjustable dual airflow, and fourteen finishes to match your mod. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eIt does exactly what a good\u003cstrong\u003e sub-ohm tank\u003c\/strong\u003e should do: deliver clean, consistent flavour at 40-90W without fuss. If you are running a 510 mod and want a tank that earns its place on top, this is a strong option. Pick one up alongside spare coils and\u003c\/span\u003e\u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/vape-accessories\" target=\"_blank\" title=\" Vape Accessorie\" rel=\"noopener\"\u003e\u003cstrong\u003e V\u003c\/strong\u003e\u003c\/a\u003e\u003cspan\u003e\u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/vape-accessories\" target=\"_blank\" title=\" Vape Accessorie\" rel=\"noopener\"\u003e\u003cstrong\u003eape Accessorie\u003c\/strong\u003e\u003c\/a\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/vape-accessories\"\u003es\u003c\/a\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003cspan\u003e at\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003ePirate Vapes\u003c\/strong\u003e\u003cspan\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eFAQs\u003c\/span\u003e\u003c\/h2\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eWhat coils does the Fireluke 2 use?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe FreeMax TX mesh coil series. The \u003c\/span\u003e\u003cspan\u003eTX2 at 0.2ohm (40-80W)\u003c\/span\u003e\u003cspan\u003e comes pre-installed, and a spare \u003c\/span\u003e\u003cspan\u003eTX1 at 0.15ohm (40-90W)\u003c\/span\u003e\u003cspan\u003e is included. Additional TX coils (TX1, TX2, TNX2, TX3, TX4) are available separately.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eWhat e-liquid works best with the Fireluke 2?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eHigh VG blends. \u003c\/span\u003e\u003cspan\u003e70\/30 or 80\/20 VG\/PG\u003c\/span\u003e\u003cspan\u003e at \u003c\/span\u003e\u003cspan\u003e3mg or 6mg freebase nicotine\u003c\/span\u003e\u003cspan\u003e suits the sub-ohm coils and wattage range. Nic salts and 50\/50 liquids are not recommended for this tank.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eIs the Fireluke 2 TPD compliant?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eYes. The UK TPD edition holds \u003c\/span\u003e\u003cspan\u003e2ml\u003c\/span\u003e\u003cspan\u003e and meets all current UK regulatory requirements. Over 18s only.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eHow long do the TX mesh coils last?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eRoughly one to two weeks with daily use. Sweeter liquids shorten coil life. The tea tree fibre wicking holds up longer than standard cotton under the same conditions.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eDoes the Fireluke 2 fit my mod?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eIf your mod has a \u003c\/span\u003e\u003cspan\u003e510 connection\u003c\/span\u003e\u003cspan\u003e and outputs at least \u003c\/span\u003e\u003cspan\u003e40W\u003c\/span\u003e\u003cspan\u003e, yes. The 28mm diameter sits comfortably on most regulated mods without overhang.\u003c\/span\u003e\u003c\/p\u003e","brand":"Freemax","offers":[{"title":"Best Colour","offer_id":52594551652634,"sku":null,"price":20.99,"currency_code":"GBP","in_stock":true},{"title":"Rainbow","offer_id":52594551685402,"sku":null,"price":20.99,"currency_code":"GBP","in_stock":true},{"title":"Red","offer_id":52594551718170,"sku":null,"price":20.99,"currency_code":"GBP","in_stock":true},{"title":"Blue","offer_id":52594551750938,"sku":null,"price":20.99,"currency_code":"GBP","in_stock":true},{"title":"Gold","offer_id":52594551783706,"sku":null,"price":20.99,"currency_code":"GBP","in_stock":true},{"title":"Black","offer_id":52594551816474,"sku":null,"price":20.99,"currency_code":"GBP","in_stock":true},{"title":"Ash","offer_id":52594551849242,"sku":null,"price":20.99,"currency_code":"GBP","in_stock":true},{"title":"Green","offer_id":52594551882010,"sku":null,"price":20.99,"currency_code":"GBP","in_stock":true},{"title":"Purple","offer_id":52594551914778,"sku":null,"price":20.99,"currency_code":"GBP","in_stock":true},{"title":"Stainless","offer_id":52594551947546,"sku":null,"price":20.99,"currency_code":"GBP","in_stock":true},{"title":"Graffiti Black","offer_id":52594551980314,"sku":null,"price":20.99,"currency_code":"GBP","in_stock":true},{"title":"Graffiti Blue","offer_id":52594552013082,"sku":null,"price":20.99,"currency_code":"GBP","in_stock":true},{"title":"Graffiti Orange","offer_id":52594552045850,"sku":null,"price":20.99,"currency_code":"GBP","in_stock":true},{"title":"Graffiti Red","offer_id":52594552078618,"sku":null,"price":20.99,"currency_code":"GBP","in_stock":true},{"title":"Graffiti Space Black","offer_id":52594552111386,"sku":null,"price":20.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0995\/5675\/3690\/files\/FreeMax_Fireluke_2_Vape_Tank.jpg?v=1785158154"},{"product_id":"freemax-m-pro-3-tank","title":"Freemax M Pro 3 Tank","description":"\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eFreemax M Pro 3 Tank\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eA \u003c\/span\u003e\u003cstrong\u003e5mL sub-ohm tank\u003c\/strong\u003e\u003cspan\u003e locked to a \u003c\/span\u003e\u003cstrong\u003e2ml TPD-compliant fill\u003c\/strong\u003e\u003cspan\u003e for UK sale, built around \u003cstrong\u003eFreemax's FM COILTECH5.0 Double-D Mesh \u003c\/strong\u003eplatform. The\u003cstrong\u003e M Pro 3\u003c\/strong\u003e is the third generation of Freemax's well-known M Pro series, pairing a stainless steel chassis with a \u003c\/span\u003e\u003cspan\u003etop-fill sliding cap\u003c\/span\u003e\u003cspan\u003e that is ISO 8317 certified child resistant. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eComes with two coils in the box: a pre-installed \u003c\/span\u003e\u003cstrong\u003e0.15ohm M1-D Mesh\u003c\/strong\u003e\u003cspan\u003e and a spare \u003c\/span\u003e\u003cstrong\u003e0.2ohm 904L M2 Mesh\u003c\/strong\u003e\u003cspan\u003e, both built for direct-to-lung vaping. Four colourways. Standard \u003c\/span\u003e\u003cspan\u003e510 thread\u003c\/span\u003e\u003cspan\u003e and \u003c\/span\u003e\u003cspan\u003e810 drip tip\u003c\/span\u003e\u003cspan\u003e for wide mod compatibility. Browse the full range of \u003c\/span\u003e\u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/vape-tanks\" target=\"_blank\" title=\"Vape Tanks\" rel=\"noopener\"\u003e\u003cstrong\u003eVape Tanks\u003c\/strong\u003e\u003c\/a\u003e\u003cspan\u003e at \u003cstrong\u003ePirate Vapes\u003c\/strong\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eWhy vapers choose this:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eDouble-D Mesh coil tech\u003c\/span\u003e\u003cspan\u003e spreads heat across a larger surface than a standard flat mesh, which Freemax claims improves flavour and heating speed by 50% over the previous M1-D coil generation\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eTwo coils included in the box\u003c\/span\u003e\u003cspan\u003e, giving you a spare from day one instead of needing a separate coil pack for your first swap\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eISO 8317 certified child resistant top-fill\u003c\/span\u003e\u003cspan\u003e means the cap genuinely resists small hands, not just a marketing label\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eCompatible with four coil types across the M Platform, so you are not locked into one resistance or one vaping style\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eStainless steel chassis\u003c\/span\u003e\u003cspan\u003e takes knocks better than the plastic-heavy tanks most competitors ship at this price\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eFreemax M Pro 3 Tank Features\u003c\/span\u003e\u003c\/h2\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eFM COILTECH5.0: What Double-D Mesh Actually Changes\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eStandard mesh coils use a single flat sheet of mesh. Freemax's Double-D design uses two D-shaped mesh sections instead, which increases the total heating surface area inside the same coil housing. More surface area heating at once means vapour production ramps up faster and flavour comes through with less lag between draw and taste. The 0.15ohm M1-D coil that ships pre-installed is built specifically around this structure.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eThat Top Cap Is Properly Child Resistant\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eISO 8317 is not a vague safety claim. It is a formal international standard for child-resistant packaging, and the M Pro 3's sliding top cap is certified against it. Pull up, slide across, fill. The mechanism that makes it resistant to small fingers does not slow down refills for you. Worth mentioning if childproofing is a genuine concern in your household.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eFour Coils, One Tank, No Guesswork\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe M Pro 3 accepts the \u003cstrong\u003eM1-D Mesh, the 904L M Mesh, \u003c\/strong\u003ethe \u003cstrong\u003eM Pro Mesh, \u003c\/strong\u003eand the\u003cstrong\u003e M Pro RBA\u003c\/strong\u003e. That is the full M Platform coil range in one tank. It means you can chase tighter flavour with one coil, bigger clouds with another, or go the rebuildable route with the RBA, all without buying a new tank. Browse the full\u003cstrong\u003e \u003c\/strong\u003e\u003c\/span\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/freemax-coils\" target=\"_blank\" title=\"Freemax Coils\" rel=\"noopener\"\u003eFreemax Coils\u003c\/a\u003e\u003c\/strong\u003e\u003cspan\u003e range to see what fits.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003e904L Stainless Steel in the Spare Coil\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe included \u003cstrong\u003e904L M2 Mesh coil\u003c\/strong\u003e uses\u003cstrong\u003e 904L stainless steel wire\u003c\/strong\u003e, a grade known for corrosion resistance and consistent resistance readings over its lifespan. It runs at 0.2ohm, slightly higher resistance than the pre-installed \u003cstrong\u003e0.15ohm M1-D\u003c\/strong\u003e, which gives you two genuinely different draws straight out of the box rather than two coils that behave almost identically.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eBuilt to Survive Being Dropped\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eStainless steel construction means the \u003cstrong\u003eM Pro 3 \u003c\/strong\u003ehandles the odd knock or short drop better than tanks built mostly from PCTG plastic. It will not survive concrete at height, and nothing does, but day-to-day bag-and-pocket abuse is where this chassis earns its keep.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eFreemax M Pro 3 Tank Colours\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eFour finishes, all using the same stainless steel body with a different surface treatment.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003e#buttons\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\"\u003eBlack\u003c\/li\u003e\n\u003cli dir=\"ltr\"\u003eGunmetal\u003c\/li\u003e\n\u003cli dir=\"ltr\"\u003eRainbow\u003c\/li\u003e\n\u003cli dir=\"ltr\"\u003eBlue\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eHow to Set Up the Freemax M Pro 3 Tank\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eStraightforward for anyone who has primed a mesh coil before.\u003c\/span\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eUnscrew the tank base\u003c\/span\u003e\u003cspan\u003e from the glass section to access the coil chamber.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eThread in your chosen coil, either the pre-installed 0.15ohm M1-D or the spare 0.2ohm 904L M2, until snug. Do not overtighten.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eReassemble the base and glass, then \u003c\/span\u003e\u003cspan\u003epull up and slide the top cap\u003c\/span\u003e\u003cspan\u003e to reveal the fill port.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eAdd \u003c\/span\u003e\u003cspan\u003e6 to 8 drops of e-liquid\u003c\/span\u003e\u003cspan\u003e directly onto the exposed mesh through the fill port before your main fill, saturating the coil ahead of first use.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eFill with e-liquid up to the 2ml TPD line. Slide the cap shut.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eLet the tank rest for 10 minutes\u003c\/span\u003e\u003cspan\u003e before your first draw, giving the Double-D mesh time to fully saturate. Skipping this step on a fresh mesh coil is the most common cause of a harsh first pull.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eStart at a low wattage matching your coil's rated range and increase gradually to find your preferred draw.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eWhat's in the Freemax M Pro 3 Tank Box\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eOne M Pro 3 Tank with the \u003cstrong\u003e0.15ohm M1-D Mesh coil \u003c\/strong\u003epre-installed, one spare \u003cstrong\u003e0.2ohm 904L M2 Mesh coil\u003c\/strong\u003e, one spare glass tube, a silicone O-ring pack, a user manual, and a desiccant pack to keep the coils dry in transit. No e-liquid, no mod, no battery included. If the glass ever cracks, \u003c\/span\u003e\u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/replacement-tank-glass\" target=\"_blank\" title=\"Replacement Tank Glass\" rel=\"noopener\"\u003e\u003cstrong\u003eReplacement Tank Glass\u003c\/strong\u003e\u003c\/a\u003e\u003cspan\u003e is sold separately.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eCompatible With the Full M Platform, Not Every Mod\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe \u003cstrong\u003eM Pro 3 \u003c\/strong\u003eis a \u003cstrong\u003e510-threaded tank\u003c\/strong\u003e, so it physically fits the vast majority of box mods and tube mods on the market. Where compatibility actually matters is the coil side: this tank only accepts coils from Freemax's M Platform, meaning \u003cstrong\u003eM1-D Mesh, 904L M Mesh, M Pro Mesh, \u003c\/strong\u003eand \u003cstrong\u003eM Pro RBA\u003c\/strong\u003e. It does not accept coils from the older Fireluke range or from other Freemax tank families.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003ePair it with a mod capable of running down to\u003cstrong\u003e 0.15ohm sub-ohm coils\u003c\/strong\u003e. Most regulated box mods on the market handle this without issue, but check your mod's minimum resistance rating if you are running an older device. Browse \u003c\/span\u003e\u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/dtl-tanks\" target=\"_blank\" title=\"DTL Tanks\" rel=\"noopener\"\u003e\u003cstrong\u003eDTL Tanks\u003c\/strong\u003e\u003c\/a\u003e\u003cspan\u003e for other sub-ohm options if you want to compare.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eAbout Freemax\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eFreemax built its reputation on mesh coil technology, and the \u003cstrong\u003eM Pro series\u003c\/strong\u003e is where that reputation gets tested hardest. The original \u003cstrong\u003eM Pro tank \u003c\/strong\u003eestablished the brand's mesh credentials in the sub-ohm space, and the M Pro 3 is the third generation of that lineage, refined with th\u003cstrong\u003ee Double-D mesh structure\u003c\/strong\u003e and a properly certified child-resistant fill system. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eFreemax also runs the\u003cstrong\u003e FM SaltCoilTech platform\u003c\/strong\u003e for\u003cstrong\u003e \u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/mtl-vape-kits\" target=\"_blank\" title=\"MTL Devices\" rel=\"noopener\"\u003eMTL Devices\u003c\/a\u003e\u003c\/strong\u003e, but the \u003cstrong\u003eM Pro 3 \u003c\/strong\u003esits firmly in DTL territory, aimed at vapers who want cloud production and flavour depth rather than a tight, cigarette-style draw.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eStock Up and Save\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eMesh coils do not last forever, especially at the lower end of the resistance range. A 0.15ohm coil run hard will need replacing sooner than most vapers expect. Grab a couple of spare \u003cstrong\u003eM1-D or 904L M2 coils\u003c\/strong\u003e alongside the tank so you are not caught out mid-week. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003ePirate Vapes\u003c\/strong\u003e\u003cspan\u003e\u003cstrong\u003e \u003c\/strong\u003eships every order same day before 4pm in padded packaging. All stock is TPD compliant with an age-verified checkout, and every accessory purchase is over 18s only. Spend over £25 and delivery is on us with Free Pirate Post.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eConclusion\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe \u003cstrong\u003eFreemax M Pro 3 Tank\u003c\/strong\u003e brings genuine engineering to a familiar category. \u003cstrong\u003eDouble-D Mesh coil\u003c\/strong\u003e tech, a properly certified child-resistant fill system, a stainless steel body that takes a knock, and access to the full \u003cstrong\u003eM Platform coil\u003c\/strong\u003e range in one tank. Four colourways mean it will suit most mod builds, and two coils in the box mean you are covered from the first fill. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eIf you want a \u003cstrong\u003esub-ohm tank \u003c\/strong\u003ethat performs as well as it is built, the \u003cstrong\u003eM Pro 3 \u003c\/strong\u003edelivers. Browse more \u003c\/span\u003e\u003cspan\u003eFreemax coils\u003c\/span\u003e\u003cspan\u003e and \u003c\/span\u003e\u003ca title=\"Vape Accessories\" href=\"https:\/\/piratevapes.co.uk\/collections\/vape-accessories\" target=\"_blank\"\u003e\u003cstrong\u003eVape Accessories\u003c\/strong\u003e\u003c\/a\u003e\u003cspan\u003e, or head to the \u003c\/span\u003e\u003cspan\u003e\u003cstrong\u003ePirate Vapes\u003c\/strong\u003e\u003c\/span\u003e\u003cspan\u003e homepage to explore the full catalogue.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eFAQs\u003c\/span\u003e\u003c\/h2\u003e\n\u003ch3 role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eWhat is the actual e-liquid capacity?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe glass holds \u003c\/span\u003e\u003cspan\u003e5mL\u003c\/span\u003e\u003cspan\u003e, but UK stock is sold with a \u003c\/span\u003e\u003cspan\u003e2ml TPD-compliant fill line\u003c\/span\u003e\u003cspan\u003e marked on the glass. Fill to that line to stay compliant.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eWhat coils fit the M Pro 3?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eFour types: \u003c\/span\u003e\u003cspan\u003eM1-D Mesh\u003c\/span\u003e\u003cspan\u003e, \u003c\/span\u003e\u003cspan\u003e904L M Mesh\u003c\/span\u003e\u003cspan\u003e, \u003c\/span\u003e\u003cspan\u003eM Pro Mesh\u003c\/span\u003e\u003cspan\u003e, and \u003c\/span\u003e\u003cspan\u003eM Pro RBA\u003c\/span\u003e\u003cspan\u003e. All part of Freemax's M Platform.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eDoes it come with spare coils?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eYes. One \u003c\/span\u003e\u003cspan\u003e0.15ohm M1-D Mesh\u003c\/span\u003e\u003cspan\u003e pre-installed and one spare \u003c\/span\u003e\u003cspan\u003e0.2ohm 904L M2 Mesh\u003c\/span\u003e\u003cspan\u003e in the box.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eIs the top-fill cap actually child resistant?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eCertified to \u003c\/span\u003e\u003cspan\u003eISO 8317\u003c\/span\u003e\u003cspan\u003e, the international standard for child-resistant packaging. It is not just a marketing claim.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eDoes this tank fit MTL setups?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eNo. This is a \u003c\/span\u003e\u003cspan\u003eDTL sub-ohm tank\u003c\/span\u003e\u003cspan\u003e built for direct-to-lung vaping. For MTL, look at Freemax's SaltCoilTech range instead.\u003c\/span\u003e\u003c\/p\u003e","brand":"Freemax","offers":[{"title":"Black","offer_id":52597940191514,"sku":null,"price":24.99,"currency_code":"GBP","in_stock":true},{"title":"Gunmetal","offer_id":52597940224282,"sku":null,"price":24.99,"currency_code":"GBP","in_stock":true},{"title":"Rainbow","offer_id":52597940257050,"sku":null,"price":24.99,"currency_code":"GBP","in_stock":true},{"title":"Blue","offer_id":52597940289818,"sku":null,"price":24.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0995\/5675\/3690\/files\/Freemax_M_Pro_3_Tank.jpg?v=1785243791"}],"url":"https:\/\/piratevapes.co.uk\/collections\/dtl-tanks.oembed","provider":"Pirate Vapes","version":"1.0","type":"link"}