{"title":"MTL Tanks","description":"\u003ch1 dir=\"ltr\"\u003e\u003cspan\u003eMTL Tanks\u003c\/span\u003e\u003c\/h1\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eMouth to lung is the draw that feels closest to a cigarette: you pull the vapour into your mouth first, then breathe it in. MTL tanks are built for exactly that, with tighter airflow and higher-resistance coils that suit nic salts and lower-powered kits. This collection gathers the MTL tanks worth owning, from the Innokin Zenith to the Aspire Nautilus, known for clean flavour and a satisfying, restricted pull. \u003cbr\u003e\u003cbr\u003eBecause the right coil and airflow make or break the draw, Pirate Vapes lists the compatible coils and fitment on every tank page, so you set yours up correctly the first time rather than guessing. Each tank is refillable and sold to over-18s only. New to MTL? Start with a proven tank, a tight airflow setting, and a 20mg nic salt.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","products":[{"product_id":"innokin-jem-2ml-tank","title":"Innokin Jem 2ml Tank","description":"\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eInnokin Jem 2ml Tank\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eSlim tank. Tight draw. Built for mouth-to-lung and nothing else. The\u003cstrong\u003e Innokin Jem 2ml Tank\u003c\/strong\u003e is\u003cstrong\u003e stainless steel\u003c\/strong\u003e and \u003cstrong\u003ePyrex glass\u003c\/strong\u003e with an adjustable airflow ring at the bottom and a screw-off top cap for filling. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eIt ships with two\u003cstrong\u003e 1.6ohm Kanthal coils\u003c\/strong\u003e, both rated for 10 to 13.5W. Standard 510 thread, so it sits on the Jem Pen and most other regulated mods without fuss. \u003cstrong\u003ePirate Vapes\u003c\/strong\u003e stocks it in Silver and Black. Fill it with your own juice, screw the cap back on, and vape. The whole thing is 14.5mm across. Barely wider than a pen.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eWhy vapers choose the Innokin Jem 2ml Tank:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eTwo spare coils in the box mean you are not immediately hunting for replacements.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eScrew-off top cap with fill slots on both sides of the chimney. No guessing where the juice goes.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eBottom airflow ring adjusts from a tight cigarette-style draw to a slightly looser MTL pull.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eStainless steel and Pyrex. Not plastic. Holds up to daily use and acidic juices.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003e510 thread fits the Jem Pen kit and most other MTL mods you probably already own.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch1 dir=\"ltr\"\u003e\u003cspan\u003eInnokin Jem 2ml Tank Features\u003c\/span\u003e\u003c\/h1\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eTwo Coils, Same Resistance, One Spare \u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eYou get two 1.6ohm Kanthal coils. One sits pre-installed inside the tank. The other stays in the box until you need it. Replacing one takes about a minute. Unscrew the base, pull the dead coil out, push a fresh one in, screw it shut. Innokin sells replacements in five-packs, and Pirate Vapes keeps them in the\u003c\/span\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/vape-coils\"\u003e Vape Coils\u003c\/a\u003e\u003c\/strong\u003e\u003cspan\u003e\u003cstrong\u003e \u003c\/strong\u003esection. The 2.0ohm ceramic coil is also compatible if you want a cooler, smoother draw, but you will need to order that one on its own. \u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eThe Airflow Ring\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eBottom of the tank. Rotates. Close it right down and the draw gets tight, close to a cigarette. Open it a notch or two, and it loosens up without ever getting airy enough to call direct-to-lung. Most people fiddle with it once, find their spot, and leave it. Not a complicated feature. But it matters more than you think when you are pulling on the thing forty times a day.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eFill It Without Flipping It\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eUnscrew the top cap completely. Two fill slots sit on either side of the central chimney. Slide your bottle nozzle into one and fill down the wall. Do not pour straight into the chimney, or you will get juice in the airflow tube, and it will gurgle. Screw the cap back on. Done. No flipping the tank upside down, no side tabs to peel back. Just unscrew, fill, close.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003ePyrex and Steel\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe glass is Pyrex, not the cheap stuff that clouds up after a month of menthol. The body is stainless steel. Together they handle everyday knocks, bag rattling, and the occasional drop onto a desk without cracking. If you have had a plastic tank go milky on you from citrus juice, this one will not do that.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eThe Drip Tip\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003e510 Delrin mouthpiece. Removable. If you do not like the shape or want something wider, any standard 510 drip tip fits. Most people leave the stock one on. It does the job.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eInnokin Jem 2ml Tank: Colours and E-Liquid Pairing\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eNo flavours here. This is a refillable tank. You pick your own juice, which is half the point. Colours at Pirate Vapes:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003e#buttons\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eSilver\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eBlack\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe 1.6ohm coils run low wattage, so they want thinner juice. A 50\/50 or 60PG\/40VG\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003ee-liquid\u003c\/span\u003e\u003cspan\u003e wicks properly and does not gum up the cotton. Nic salts in 10mg or 20mg work well. Thicker blends, anything 70VG and above, struggle to keep up at this resistance. You will get dry hits and burnt cotton, and that ruins a coil fast.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eHow to Set Up the Innokin Jem 2ml Tank\u003c\/span\u003e\u003c\/h2\u003e\n\u003col\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eUnscrew the base of the tank. Check that the 1.6ohm coil is seated inside. If it is not, push one in from the box.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eScrew the base back on. Finger-tight. Do not force it.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eUnscrew the top cap fully. Fill through either slot, keeping the nozzle against the glass wall. Do not pour into the central chimney.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eScrew the cap back on. Stand the tank upright for three to five minutes. The cotton inside the coil needs time to soak through. Skip this step, and you will burn the coil on the first draw.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eScrew the tank onto your Jem Pen or any 510 device.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eIf you are using the Jem Pen, click the fire button five times to power on. Vape as normal.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eWhat's in the Innokin Jem 2ml Tank Box\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003e1x Innokin Jem 2ml Tank\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003e2x 1.6ohm Kanthal Jem Coils (one pre-installed, one spare)\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eNo device. No cable. No juice. Just the tank and two coils.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eFits the Jem Pen and Any 510 Mod\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe Jem Tank was made for the Innokin Jem Pen kit. But it uses a standard 510 thread, so it screws onto most regulated devices that accept 510\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003evape tanks\u003c\/span\u003e\u003cspan\u003e. If you own an \u003cstrong\u003eInnokin Endura, Coolfire, Kroma,\u003c\/strong\u003e or anything else with a 510 connection, it will fit.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eOne thing to know: Jem coils only work in the Jem Tank. They are not the same as Zenith Z-coils, T18 coils, or any other \u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/innokin-vapes\" target=\"_blank\" title=\"Innokin Coil Range\" rel=\"noopener\"\u003e\u003cstrong\u003eInnokin Coil Range\u003c\/strong\u003e\u003c\/a\u003e. Different shape, different threading. Make sure you order the right ones.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eAbout Innokin\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eInnokin has been around since 2011, and they have built most of their reputation on MTL hardware. The\u003cstrong\u003e Endura T18 was the kit\u003c\/strong\u003e that a lot of UK vapers started on. The Coolfire range added variable wattage without getting complicated. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe \u003cstrong\u003eZenith Tank \u003c\/strong\u003eis still one of the most recommended \u003cstrong\u003e\u003ca title=\"MTL Tanks\" href=\"https:\/\/piratevapes.co.uk\/collections\/mtl-tanks\" target=\"_blank\"\u003eMTL Tanks\u003c\/a\u003e \u003c\/strong\u003ein the UK vape community. More recently, they partnered with Aquios on water-based e-liquid technology and moved to fully recyclable packaging. Not the flashiest brand on the shelf. But their stuff works, and it tends to keep working.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eStock Up and Save\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eOrder from\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003ePirate Vapes\u003c\/strong\u003e\u003cspan\u003e\u003cstrong\u003e \u003c\/strong\u003eand get Free Pirate Post on orders over £25. Pair the tank with a five-pack of Jem replacement coils and a couple of bottles of nic salt to clear the free delivery threshold. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eEverything ships padded and tracked, so the glass arrives in one piece.\u003cstrong\u003e Same-day dispatch\u003c\/strong\u003e on orders placed before 4pm, weekdays. All products are MHRA-notified, and checkout is age-verified. You must be 18 or over to buy.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eConclusion\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eStainless steel and Pyrex glass. Adjustable airflow. Screw-off top cap. Two \u003cstrong\u003e1.6ohm coils\u003c\/strong\u003e in the box. Standard 510 thread. That is the whole pitch. The Jem Tank does not try to do everything. It does MTL, it does it cleanly, and it fits on gear you already have. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eIf you want something small and reliable that gets out of the way and lets you vape, this is a solid pick. Grab one from \u003cstrong\u003ePirate Vapes\u003c\/strong\u003e and fill it with whatever juice you like.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eFAQs\u003c\/span\u003e\u003c\/h2\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eWhat coils does this tank take?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eInnokin Jem coils. The box comes with two 1.6ohm Kanthal coils. A 2.0ohm ceramic version also exists and fits the same tank, but it is sold separately in packs of five.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eWill it fit my mod?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eIf your mod has a 510 connection, yes. That covers most regulated devices from Innokin, Vaporesso, Aspire, SMOK, VooPoo, and others.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eWhat juice should I use?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003e50\/50 or 60PG\/40VG e-liquids. Nic salts in 10mg or 20mg work well at this resistance. Do not go above 60% VG or you risk dry hits and burnt cotton.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eHow do I know when the coil needs replacing?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eFlavour drops. You get a papery or slightly burnt taste. Sometimes the tank gurgles or spits. When that happens, swap in the spare or crack open a fresh five-pack.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eIs it TPD compliant?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eYes. 2ml capacity. MHRA-notified when sold through UK retailers like Pirate Vapes.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eDoes it leak?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eNot when assembled properly. Keep the top cap screwed tight, do not overfill, and close the airflow ring when the tank is sitting unused. Leaving it on its side for hours is asking for trouble with any tank, not just this one.\u003c\/span\u003e\u003c\/p\u003e","brand":"Innokin","offers":[{"title":"Silver","offer_id":52527767126298,"sku":null,"price":6.99,"currency_code":"GBP","in_stock":true},{"title":"Black","offer_id":52527767159066,"sku":null,"price":6.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0995\/5675\/3690\/files\/Innokin_Jem_2ml_Tank.jpg?v=1784215309"},{"product_id":"vaporesso-itank-sub-ohm-tank","title":"Vaporesso iTank Sub Ohm Tank","description":"\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eVaporesso iTank Sub Ohm Tank \u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003ePirate Vapes carries the \u003cstrong\u003eVaporesso iTank Sub Ohm Tank \u003c\/strong\u003efor a reason. It is one of those tanks that does not try to reinvent anything. It just gets the basics right. 2ml capacity,\u003cstrong\u003e GTi mesh coils,\u003c\/strong\u003e a 510 thread that screws onto whatever mod you already have, and a Turbo Airflow System that genuinely changes how smooth the draw feels compared to older sub-ohm tanks. \u003c\/span\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eFill it from the top, press a coil in, set your wattage. The whole thing is stainless steel and Pyrex, built to take daily use without looking rough after a month. \u003cstrong\u003ePirate Vapes\u003c\/strong\u003e ships it age-verified across the UK. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eWhy vapers choose this:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eTurbo Airflow System with three bottom air inlets for smoother, quieter draws and more consistent flavour.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003ePress-fit coil installation. No threading, no cross-threading, no messing about.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eSecure sliding top-fill design that keeps juice where it should be.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eSelf-circulating e-liquid system that recirculates condensation back toward the coil to reduce leakage at the base.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003e510 connection that works with most sub-ohm mods without adapters or compatibility headaches.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eVaporesso iTank Sub Ohm Tank Features\u003c\/span\u003e\u003c\/h2\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eTurbo Airflow System\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThree separate air inlets sit around the base of the tank. Most sub-ohm tanks use one or two. Three spreads the draw more evenly across the mesh strip, and you notice it. Less turbulence, less of that rattly noise some tanks make at high wattage. Tighten the ring for a warmer, more restricted pull. Leave it wide open and you get a proper airy DTL hit. The difference between full open and half-closed is pretty dramatic on this tank.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eGTi Mesh Coil Platform\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eMesh coils heat faster and cover more surface area than traditional round wire. That is not news. What makes the GTi platform worth talking about is the press-fit system. You push the coil into the base and it seats itself. No screwing it in, no worrying about whether the threads have caught properly. Replacement GTi Coils come in packs of five from the\u003c\/span\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/vape-coils\"\u003e \u003c\/a\u003e\u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/vape-coils\" title=\"Vape Coils\" target=\"_blank\"\u003eVape Coils\u003c\/a\u003e\u003c\/strong\u003e\u003cspan\u003e\u003cstrong\u003e \u003c\/strong\u003ecollection at \u003cstrong\u003ePirate Vapes\u003c\/strong\u003e, so keeping spares around is easy.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eSlide-Open Top Fill\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eSlide the top cap open, pour your juice in, slide it back. The silicone seal sits flush so nothing drips between refills. Wide enough for most bottle nozzles. Not much else to say about it, honestly. It works, it seals, it does not pop open in your pocket. That is what you want from a fill system.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eSelf-Circulating E-Liquid System\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eCondensation builds up in every sub-ohm tank. It pools at the base, creeps through the 510 pin, leaves your mod sticky. Vaporesso built a recirculation channel into the iTank that draws that condensation back toward the coil instead of letting it sit there. It does not eliminate condensation entirely, nothing does, but it keeps the base noticeably cleaner than most tanks in this price range.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eAdjustable Bottom Airflow\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe ring at the base has three slots you can open or close. Wide open is full DTL, big clouds, airy draw. Close it down and the vapour gets warmer, denser, more flavour-focused. There is enough range here that you can genuinely dial it in to how you like it rather than just picking between \"open\" and \"slightly less open.\" Pair the tank with a\u003cstrong\u003e \u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/high-vg-e-liquid\"\u003eHigh VG\u003c\/a\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003ca title=\"High VG E-Liquid\" href=\"https:\/\/piratevapes.co.uk\/collections\/high-vg-e-liquid\" target=\"_blank\"\u003e\u003cstrong\u003e E-Liquid\u003c\/strong\u003e\u003c\/a\u003e\u003cspan\u003e\u003cstrong\u003e \u003c\/strong\u003efrom our collection and you will get the most out of it.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eVaporesso iTank Sub Ohm Tank Colour Options\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThis is a\u003cstrong\u003e refillable sub-ohm tank\u003c\/strong\u003e, so there are no flavour variants. You fill it yourself with whatever juice suits you, which honestly is one of the best things about owning a tank instead of a prefilled pod system.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003ePirate Vapes currently stocks the iTank in two finishes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003e#buttons\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\"\u003eRainbow\u003c\/li\u003e\n\u003cli dir=\"ltr\"\u003eAurora Green \u003cspan\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe iTank is manufactured in additional colours including Black, Grey, and Silver, among others. Stock at \u003cstrong\u003ePirate Vapes\u003c\/strong\u003e reflects current UK availability.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eHow to Set Up the Vaporesso iTank Sub Ohm Tank\u003c\/span\u003e\u003c\/h2\u003e\n\u003col\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eUnscrew the base of the tank and press-fit the GTi coil into place. It should seat firmly without any wobble.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eDrop a few drops of e-liquid directly onto the exposed cotton on the coil. This is priming, and skipping it is the fastest way to burn out a fresh coil.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eScrew the base back onto the tank body.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eSlide the top cap open and fill the tank with your chosen juice. Do not overfill past the max line.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eClose the top cap and let the tank sit upright for five to ten minutes. Seriously. The cotton needs time to saturate fully or you will taste it on your first draw.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eScrew the tank onto your 510 mod. Set your wattage to the lower end of the coil's recommended range.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eTake a few gentle draws first and gradually increase the wattage until you find where the flavour sits best for you.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eWhat's in the Vaporesso iTank Sub Ohm Tank Box\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003e\u003cstrong\u003eOne iTank (2ml, TPD-compliant)\u003c\/strong\u003e, one \u003cstrong\u003eGTi 0.2Ω mesh coil (rated 60 to 75W)\u003c\/strong\u003e, one \u003cstrong\u003eGTi 0.4Ω mesh coil (rated 50 to 60W)\u003c\/strong\u003e, one spare glass tube, three replacement O-rings, and a user manual. That is per the manufacturer's listed box contents. No mod, no battery, no e-liquid included. You are getting the tank and coils only.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eBuilt for Any 510 Mod\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe iTank uses a standard 510 threaded connection, so it is compatible with most 510-thread vape mods. No proprietary fittings. If you already own a Vaporesso GEN 200, a GeekVape Aegis, a SMOK Morph, or pretty much any other sub-ohm capable mod, the iTank screws straight on.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eOn the coil side, the tank takes the full \u003cstrong\u003eVaporesso GTi Mesh \u003c\/strong\u003erange. The two in the box handle most preferences, but there is also a\u003cstrong\u003e 0.15Ω\u003c\/strong\u003e option in the GTi lineup for higher wattage vaping at 75 to 90W. You can find\u003cstrong\u003e replacement coils\u003c\/strong\u003e alongside the tank in the\u003c\/span\u003e\u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/vape-tanks\"\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/a\u003e\u003ca title=\"Vape Tanks\" href=\"https:\/\/piratevapes.co.uk\/collections\/vape-tanks\" target=\"_blank\"\u003e\u003cstrong\u003eVape Tanks\u003c\/strong\u003e\u003c\/a\u003e\u003cspan\u003e selection at \u003cstrong\u003ePirate Vapes\u003c\/strong\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eAt 24.5mm diameter, the iTank sits flush on most modern mods without overhang. Worth noting though: this is a DTL tank through and through. If you want a tight, cigarette-style draw, you are better off with a pod kit or an \u003ca title=\"MTL Tank\" href=\"https:\/\/piratevapes.co.uk\/collections\/mtl-tanks\" target=\"_blank\"\u003e\u003cstrong\u003eMTL Tank\u003c\/strong\u003e\u003c\/a\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eAbout Vaporesso\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eVaporesso launched in 2015 out of Shenzhen, China, backed by parent company Smoore. They have been around long enough now that most vapers have used at least one of their products, whether that is an \u003cstrong\u003eXROS pod kit\u003c\/strong\u003e, a Target mod, or one of the GEN series setups. The company holds hundreds of patents and sells in over 60 countries. Where they have carved out their space is coil technology. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe GTi and earlier \u003cstrong\u003eGT coil \u003c\/strong\u003efamilies have built a following among vapers who got tired of coils lasting three days on sweet juice. The iTank sits in the DTL end of their lineup, and it shows what the \u003cstrong\u003eGTi platform \u003c\/strong\u003ecan do when paired with decent airflow engineering.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eStock Up and Save\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eHow long a\u003cstrong\u003e GTi coil \u003c\/strong\u003elasts depends on what juice you run and how high you push the wattage. Sweeter liquids will shorten that window, always do. Keeping a five-pack of replacement coils around means you are never stuck vaping burnt cotton while you wait on a delivery. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003ePirate Vapes stocks only genuine \u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/vaporesso-vapes\" target=\"_blank\" title=\"Vaporesso Products\" rel=\"noopener\"\u003e\u003cstrong\u003eVaporesso Products\u003c\/strong\u003e\u003c\/a\u003e, packed properly and dispatched with tracking across the UK. Every order goes through age-verified checkout, 18+ only, and all stock is TPD-compliant. Whether you are setting up for the first time or just restocking, everything you need is in one place.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eConclusion\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe \u003cstrong\u003eVaporesso iTank Sub Ohm Tank\u003c\/strong\u003e does what a good \u003cstrong\u003e\u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/dtl-tanks\" target=\"_blank\" title=\"DTL Tank\" rel=\"noopener\"\u003eDTL Tank\u003c\/a\u003e \u003c\/strong\u003eshould without overcomplicating things. Consistent flavour, solid clouds, easy fills, and coils that hold up well with regular use. The triple-inlet Turbo Airflow System and self-circulating condensation design deal with two of the biggest annoyances in sub-ohm tanks: uneven flavour and juice pooling at the base. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eIt fits any 510 mod, takes widely available \u003cstrong\u003eGTi coils\u003c\/strong\u003e, and the press-fit installation means you spend less time fiddling with hardware and more time actually vaping. If you want a reliable sub-ohm tank at a reasonable price, the iTank earns its spot. Available now at \u003cstrong\u003ePirate Vapes \u003c\/strong\u003ewith tracked, age-verified UK delivery.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eFAQs\u003c\/span\u003e\u003c\/h2\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eWhat wattage should I use with the Vaporesso iTank?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe 0.4Ω coil runs best between 50 and 60W. The 0.2Ω coil sits between 60 and 75W. Start at the lower end of whichever coil you are using and work your way up until the flavour feels right.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eCan I use other coils in the iTank?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eOnly Vaporesso GTi coils. The older GT Mesh and GTX coils are different platforms and will not fit this tank.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eDoes the iTank leak?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eWhen assembled properly, leaking is minimal. The self-circulating system helps keep the base dry. If you are getting leaks, check your O-rings and make sure the coil is fully seated.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eWhat juice works best?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eHigh VG e-liquids are recommended, ideally 70\/30 or above. This is a sub-ohm tank built for DTL vaping. Thinner liquids may not perform as well in this setup.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eWill the iTank fit my mod?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eIf your mod has a 510 connection and supports sub-ohm coils, it should work. The tank is 24.5mm at the base, which sits flush on most modern box mods.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eHow often should I change the coil?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eIt varies depending on your e-liquid and how much you vape. When flavour starts tasting flat or slightly off, that is your sign to swap in a fresh one.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eIs the iTank the same as the iTank 2?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eNo. The iTank 2 is an updated version with improved leak resistance and a revised airflow design. Both use GTi coils, but they are separate products.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eWhat is the difference between the 0.2Ω and 0.4Ω coil?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe 0.4Ω runs at lower wattage, gives a slightly cooler vape, and tends to be the better option for flavour. The 0.2Ω runs hotter, produces more cloud, and uses more juice and battery power.\u003c\/span\u003e\u003c\/p\u003e","brand":"Vaporesso","offers":[{"title":"Rainbow","offer_id":52534365159706,"sku":null,"price":9.95,"currency_code":"GBP","in_stock":true},{"title":"Aurora Green","offer_id":52534365192474,"sku":null,"price":9.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0995\/5675\/3690\/files\/Vaporesso_iTank_Sub_Ohm_Tank.jpg?v=1784263490"},{"product_id":"aspire-k1-tank","title":"Aspire K1 BVC Glassomizer Tank | Replacement Tank","description":"\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eAspire K1 Glassomizer Tank \u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eSmall, slim, and built to do one job properly. The Aspire K1 is a 1.5ml \u003cstrong\u003emouth-to-lung\u003c\/strong\u003e glassomizer made from Pyrex glass and stainless steel, and it screws onto any eGo-threaded battery without hanging over the sides. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003e\u003cstrong\u003eAspire's BVC coil\u003c\/strong\u003e sits inside the base, wicks vertically, and pulls a clean draw every time. You unscrew the bottom, fill it, screw it back on. That is the entire process. Two coil resistances to choose from, \u003cstrong\u003e1.6Ω and 1.8Ω\u003c\/strong\u003e, both built for \u003cstrong\u003ehigher-PG liquids\u003c\/strong\u003e and 50\/50 blends. \u003cstrong\u003ePirate Vapes\u003c\/strong\u003e carries the genuine article with fast, age-verified UK shipping. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eWhy vapers choose this:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003ePyrex glass body that handles acidic and citrus e-liquids without clouding or reacting\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eBVC coil wicks vertically for cleaner, more consistent flavour than older horizontal designs\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eFully disassembles for cleaning, every single piece comes apart\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eSlim 14.5mm profile sits flush on eGo batteries, no overhang whatsoever\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eStandard 510 drip tip, swap it out for any aftermarket tip you like\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eAspire K1 Glassomizer Tank Features\u003c\/span\u003e\u003c\/h2\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eBVC Coil Technology\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eAspire's Bottom Vertical Coil sits upright inside the base rather than lying flat like the older BDC design. Liquid wicks more evenly across the cotton, which means you get a more consistent draw from a full tank down to nearly empty. Two resistance options let you shift the warmth and throat hit depending on what you prefer. The coils are sold separately and thread straight in.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003ePyrex Glass Build\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe K1 uses Pyrex glass, which is more resistant to acidic e-liquids than polycarbonate and will not cloud up the way plastic tanks tend to after a few weeks. You can see exactly how much juice is left, and it stays crystal clear over time. Browse the\u003cstrong\u003e \u003c\/strong\u003e\u003c\/span\u003e\u003cstrong\u003e\u003ca title=\"Vape Tanks\" href=\"https:\/\/piratevapes.co.uk\/collections\/vape-tanks\" target=\"_blank\"\u003eVape Tanks\u003c\/a\u003e \u003c\/strong\u003ecollection\u003cspan\u003e at Pirate Vapes if you want to compare it against other glass tank options.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eBottom-Fill, No Fuss\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eFlip the tank upside down. Unscrew the base. Tilt it at an angle and drip liquid down the inside wall, keeping it away from the central airflow tube. Screw the base back on. Flip upright. Done. No tiny side ports. No silicone flaps that wear out. It takes less than a minute, and you will rarely spill anything once you have done it twice.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eEasy to Strip Down and Clean\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe tank disassembles for cleaning. Pull the drip tip off, separate the base, remove the coil. Rinse everything under warm water, let it dry, put it back together. A tank with old juice residue sitting in it tastes stale no matter how fresh the coil is. The K1 makes the cleaning part quick enough that you will actually bother doing it.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eSlim Enough to Pocket\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eFourteen and a half millimetres across. Seventy-two millimetres tall. It adds next to nothing to your battery. Sits flush on eGo-style devices, slips into a jacket pocket, and the stainless steel construction is built for everyday carrying. Not a showpiece. A workhorse.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eAspire K1 Glassomizer Tank Coil Options\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eNo flavour variants here because you fill the K1 yourself. Your only decision is which BVC coil resistance to run, and that changes how warm the draw feels and what voltage range you should be using.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003e#buttons\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\"\u003e1.8Ω BVC Coil\u003c\/li\u003e\n\u003cli dir=\"ltr\"\u003e1.6Ω BVC Coil\u003cstrong\u003e\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe 1.8Ω comes pre-installed. If you want something warmer with a bit more throat, swap to the 1.6Ω. Both use Aspire's standard (non-Nautilus) BVC heads, sold in five-packs. Pair either coil with a \u003cstrong\u003ehigh-PG e-liquid\u003c\/strong\u003e or a \u003cstrong\u003e50\/50 blend\u003c\/strong\u003e for the best wicking. \u003ca title=\"Higher-VG Liquids\" href=\"https:\/\/piratevapes.co.uk\/collections\/high-vg-e-liquid\" target=\"_blank\"\u003e\u003cstrong\u003eHigher-VG Liquids\u003c\/strong\u003e\u003c\/a\u003e may not wick efficiently in a tank this slim, so keep it at 60% VG or below. Check the \u003c\/span\u003e\u003cstrong\u003e\u003ca title=\"Vape Coils\" href=\"https:\/\/piratevapes.co.uk\/collections\/vape-coils\" target=\"_blank\"\u003eVape Coils\u003c\/a\u003e \u003c\/strong\u003ecollection\u003cspan\u003e at \u003cstrong\u003ePirate Vapes\u003c\/strong\u003e for compatible Aspire BVC heads.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eHow to Set Up the Aspire K1 Glassomizer Tank \u003c\/span\u003e\u003c\/h2\u003e\n\u003col\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eTurn the K1 upside down so the drip tip faces the floor.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eUnscrew the base counter-clockwise. The coil stays attached to it.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eTilt the tank at a 45-degree angle.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eDrip e-liquid slowly down the inner glass wall using the tip of your bottle. Do not let any liquid go into the central airflow tube. If it does, you will get juice in your mouth on the first draw.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eFill to around 1.5ml. There is no fill line marked on the glass, so go steady and stop before it reaches the top.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eScrew the base back on while the tank is still upside down. Finger-tight. Do not crank it.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eFlip upright and check the base for any seepage.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eThread the tank onto your eGo battery.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eWait two to three minutes before you draw. The coil cotton has to soak through first. Skip the wait and you risk a dry hit that will wreck a brand-new coil in one go.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eWhat's in the Aspire K1 Glassomizer Tank \u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eOne Aspire K1 Pyrex Glass Glassomizer. One 1.8Ω BVC coil, already installed. One stainless steel 510 drip tip, already fitted. That is the lot. No battery, no spare coils, no e-liquid included. You will need an eGo-threaded battery and a bottle of juice to get going.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003e\u003cstrong\u003eReplacement BVC coils\u003c\/strong\u003e come separately in five-packs and also fit the CE5, CE5-S, ET, and ET-S clearomizers. They do not fit the Nautilus or Nautilus Mini.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eBuilt for eGo Batteries and the Aspire Range\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe K1 threads onto any standard eGo battery. That covers the\u003cstrong\u003e Aspire CF G-Power\u003c\/strong\u003e, \u003cstrong\u003eCF VV+\u003c\/strong\u003e, and the majority of third-party eGo-style devices you will come across. At 14.5mm wide, there is zero overhang on slim batteries and the connection sits flush. For coils, the K1 takes Aspire's standard BVC heads in \u003cstrong\u003e1.6Ω and 1.8Ω\u003c\/strong\u003e, and will also accept the older BDC heads if you still have a box of those. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eIt does not take \u003cstrong\u003eNautilus BVC coils\u003c\/strong\u003e. Different threading, different fit. The drip tip is a standard 510, so any aftermarket 510 tip works if you prefer a different bore or material. Pair it with a good \u003cstrong\u003ehigh-PG \u003c\/strong\u003eor \u003cstrong\u003e50\/50 juice \u003c\/strong\u003efrom the \u003c\/span\u003e\u003ca title=\"E-Liquids Collection\" href=\"https:\/\/piratevapes.co.uk\/collections\/e-liquids\" target=\"_blank\"\u003e\u003cstrong\u003eE-Liquids Collection\u003c\/strong\u003e\u003c\/a\u003e\u003cspan\u003e at \u003cstrong\u003ePirate Vapes \u003c\/strong\u003efor the best results.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eAbout Aspire\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eAspire has been making vaping hardware since 2013, and the Nautilus tank on its own probably moved more smokers across to vaping than any public health campaign managed to. They brought BVC coils into the mainstream, put Pyrex glass into tanks when most brands were still glueing polycarbonate tubes together, and kept refining designs around flavour rather than spec-sheet numbers. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe \u003cstrong\u003eK1, CE5, Nautilus, PockeX, Flexus. Different products\u003c\/strong\u003e, same thinking. Build it properly, keep it simple, make the flavour the priority. Their gear turns up in vape shops everywhere because it works and keeps working.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eStock Up and Save\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eOne tank, one coil inside.\u003cstrong\u003e BVC replacement \u003c\/strong\u003eheads come in five-packs, and each coil lasts one to two weeks depending on usage and juice type. Sweeter liquids gunk coils faster. \u003c\/span\u003e\u003cspan\u003e\u003cstrong\u003ePirate Vapes\u003c\/strong\u003e\u003c\/span\u003e\u003cspan\u003e packs every order in padded, tracked packaging so nothing arrives loose. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eAll products are \u003cstrong\u003egenuine Aspire\u003c\/strong\u003e, sold through age-verified checkout for full UK compliance. The Crow's Nest subscription keeps coils coming on a schedule with a saving built in.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eConclusion\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe \u003cstrong\u003eAspire K1 \u003c\/strong\u003edoes one job and does it properly. Clean \u003cstrong\u003emouth-to-lung draw\u003c\/strong\u003e, Pyrex glass you can actually see through after weeks of use, \u003cstrong\u003eBVC coils \u003c\/strong\u003ethat wick evenly, and a profile slim enough to forget it is on your battery. No screens, no wattage dials, no parts catalogue to memorise. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eFill it up, screw it on, draw. For a fuss-free \u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/mtl-tanks\" target=\"_blank\" title=\"MTL Tank\" rel=\"noopener\"\u003e\u003cstrong\u003eMTL Tank\u003c\/strong\u003e\u003c\/a\u003e that lets the juice do the work, the K1 is still one of the names people come back to. \u003cstrong\u003ePirate Vapes\u003c\/strong\u003e stocks genuine \u003cstrong\u003eAspire K1 tanks\u003c\/strong\u003e with fast, age-verified UK delivery.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eFAQs\u003c\/span\u003e\u003c\/h2\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eWhat coil does the Aspire K1 use?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eStandard Aspire BVC (Bottom Vertical Coil) heads, available in 1.6Ω and 1.8Ω. Sold separately in five-packs. Do not buy Nautilus BVC coils for this tank. They look alike but the threading is different and they will not fit.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eCan I use high-VG e-liquid in the K1?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eNot ideal. The K1 has small wicking ports that were designed around thinner liquids. High-PG or 50\/50 blends work best. Higher-VG liquids may not wick efficiently, and once the cotton dries out mid-draw, you are looking at a burnt hit.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eWill the K1 fit my battery?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eIf your battery has an eGo thread, yes. That includes most pen-style batteries and the Aspire CF range. Box mods with only a 510 connection will need an eGo-to-510 adapter.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eHow long does a BVC coil last?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eDepends on how much you vape and what juice you use. Sweeter, darker liquids gunk up coils faster. Most people get somewhere between one and two weeks from a coil before it starts tasting flat or papery.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eDoes the K1 leak?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eRarely, if you fill it properly. Most leaking happens because the base was not screwed on tightly enough or because e-liquid went down the central airflow tube during filling. Take your time, tighten finger-tight, and it should stay dry.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eCan I use the K1 drip tip on other tanks?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eYes. It is a standard 510 drip tip. Pull it off the K1 and it will fit any 510-compatible tank. Works the other way too. Any aftermarket 510 tip will slot into the K1.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eIs this the same as the Aspire K1 Plus?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eNo. The K1 Plus is a bigger tank with a 2.4ml capacity. The original K1 holds 1.5ml and has a slimmer build. Check the name printed on your existing tank before you order.\u003c\/span\u003e\u003c\/p\u003e","brand":"Aspire","offers":[{"title":"BVC Coils 1.8 Ohm","offer_id":52534393012506,"sku":null,"price":11.99,"currency_code":"GBP","in_stock":true},{"title":"BVC Coils 1.6 Ohm","offer_id":52534393045274,"sku":null,"price":11.99,"currency_code":"GBP","in_stock":true},{"title":"No Need","offer_id":52534393078042,"sku":null,"price":5.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0995\/5675\/3690\/files\/Aspire_K1_Glassomizer_Tank.jpg?v=1784265322"},{"product_id":"innokin-ajax-tank","title":"Innokin Ajax Sub Ohm Tank","description":"\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eInnokin Ajax Sub Ohm Tank\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eTwenty-four millimetres wide, built around \u003cstrong\u003eInnokin's \u003c\/strong\u003e\u003c\/span\u003e\u003cstrong\u003ePlex3D Matrix mesh coils\u003c\/strong\u003e\u003cspan\u003e, and one of the few sub-ohm tanks from a brand better known for \u003cstrong\u003eMTL hardware\u003c\/strong\u003e. The Ajax holds \u003c\/span\u003e\u003cspan\u003e2ml under \u003cstrong\u003eUK TPD\u003c\/strong\u003e\u003c\/span\u003e\u003cspan\u003e\u003cstrong\u003e \u003c\/strong\u003eand uses a \u003c\/span\u003e\u003cspan\u003esliding top-fill\u003c\/span\u003e\u003cspan\u003e system that opens without removing any components. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eDual adjustable airflow sits at the base, giving you control over how open the draw runs. \u003c\/span\u003e\u003cspan\u003e510 threaded\u003c\/span\u003e\u003cspan\u003e, so it goes onto any mod that supports the connection. Two coil options: \u003c\/span\u003e\u003cstrong\u003e0.16ohm at 50-80W\u003c\/strong\u003e for clouds and\u003cstrong\u003e 0.35ohm\u003c\/strong\u003e\u003cspan\u003e\u003cstrong\u003e at 30-55W\u003c\/strong\u003e for a more restrained draw. Three colours available.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eWhy vapers choose this:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003ePlex3D Matrix coils use a three-dimensional mesh pattern\u003c\/span\u003e\u003cspan\u003e that heats liquid from multiple angles rather than just the surface, which gives noticeably better flavour extraction compared to flat mesh designs\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eSliding top fill\u003c\/span\u003e\u003cspan\u003e opens with a push rather than unscrewing, meaning one-handed refills are genuinely possible when you are on the go\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003e24mm diameter\u003c\/span\u003e\u003cspan\u003e keeps it compact enough for smaller mods while still fitting a proper dual-airflow system and decent coil chamber\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eTwo coil resistances\u003c\/span\u003e\u003cspan\u003e cover both full DTL at 80W and a more moderate 30-55W draw, so the tank works across a wider wattage range than most single-coil sub-ohm setups\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003e510 thread fits any compatible mod\u003c\/span\u003e\u003cspan\u003e from Innokin's own lineup or from other brands, no adaptor needed\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eInnokin Ajax Sub Ohm Tank Features\u003c\/span\u003e\u003c\/h2\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003ePlex3D Is Not Standard Mesh\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eMost mesh coils use a flat strip. The \u003cstrong\u003ePlex3D Matrix coil\u003c\/strong\u003e uses a three-dimensional mesh structure instead, folded in a way that creates multiple contact points with the\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003ee-liquid\u003c\/span\u003e\u003cspan\u003e. In practice, that means more of the liquid is being heated at once, and the flavour comes through with more depth. Innokin built this coil specifically for the Ajax, and it shows.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eSliding Top Fill Is Genuinely Useful\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003ePush the top cap to one side, and the fill port opens. No unscrewing, no pulling, no twisting. You can do it with one hand while the tank is still attached to the mod. Gravity handles the rest. The silicone seal around the port keeps liquid from leaking out when closed. A small thing, but it makes a real difference when you refill two or three times a day.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003e24mm and Still Room for Airflow\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eA lot of 24mm tanks sacrifice airflow design to keep the diameter down. The Ajax manages to fit dual bottom airflow slots into that 24mm body. Both are adjustable, and both actually change the draw when you turn the ring. From wide-open DTL clouds to a more focused restricted draw, it covers enough ground to keep most sub-ohm vapers happy.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eGlass Body, Steel Frame\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe tank section is glass. Durable, easy to clean, and gives you a clear view of your liquid level. The top cap and base are stainless steel. It looks clean on a\u003c\/span\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/vape-mods\"\u003e \u003c\/a\u003e\u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/vape-mods\" target=\"_blank\" title=\"Vape Mod\" rel=\"noopener\"\u003eVape Mod\u003c\/a\u003e\u003c\/strong\u003e\u003cspan\u003e without adding unnecessary bulk, and the steel components hold up to regular use without showing wear quickly.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eDesigned for the Proton Mini but Not Locked to It\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eInnokin built the Ajax to ship with the\u003cstrong\u003e Proton Mini kit\u003c\/strong\u003e, but the 510 threading means it works independently. If you already own a mod and want to try Plex3D coils without buying a whole new kit, this tank is how you do that. Any 510 mod that reaches 50W or higher will drive it properly.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eInnokin Ajax Sub Ohm Tank Colours\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThree finishes. All stainless steel hardware with glass tank bodies:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e#buttons\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli data-end=\"81\" data-start=\"72\" data-section-id=\"t3dqof\"\u003eBlack\u003cspan class=\"PDq2pG_selectionAnchor\" aria-hidden=\"true\"\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"90\" data-start=\"82\" data-section-id=\"1vm4tva\"\u003eBlue\u003c\/li\u003e\n\u003cli data-is-last-node=\"\" data-end=\"108\" data-start=\"91\" data-section-id=\"17pe31n\"\u003eStainless Steel\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eHow to Set Up the Innokin Ajax Sub Ohm Tank\u003c\/span\u003e\u003c\/h2\u003e\n\u003col\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eUnscrew the base of the tank and push a \u003c\/span\u003e\u003cspan\u003ePlex3D Matrix coil\u003c\/span\u003e\u003cspan\u003e into the base section until it seats firmly.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eDrop \u003c\/span\u003e\u003cspan\u003ethree to four drops of e-liquid\u003c\/span\u003e\u003cspan\u003e onto the cotton through the coil's exposed wicking slots.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eScrew the base back onto the glass section, then attach the tank to your mod via the \u003c\/span\u003e\u003cspan\u003e510 thread\u003c\/span\u003e\u003cspan\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eSlide the top cap open and fill with\u003c\/span\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/70-30-shortfills\"\u003e \u003c\/a\u003e\u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/70-30-shortfills\" target=\"_blank\" title=\"70\/30 Shortfills\" rel=\"noopener\"\u003e70\/30 Shortfills\u003c\/a\u003e\u003c\/strong\u003e\u003cspan\u003e or high VG freebase liquid up to the fill line.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eClose the top cap and leave the tank standing upright for a good \u003c\/span\u003e\u003cspan\u003esix to eight minutes\u003c\/span\u003e\u003cspan\u003e before you fire it. Let the Plex3D mesh saturate fully.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eStart vaping at the \u003c\/span\u003e\u003cspan\u003elow end of the coil's wattage range\u003c\/span\u003e\u003cspan\u003e and bring it up gradually.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eWhat's in the Innokin Ajax Sub Ohm Tank Box\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eOne Ajax Sub Ohm Tank in your selected colour. Coils are typically sold separately unless bundled with the Proton Mini kit. Check the product listing to confirm whether a coil is included or if one needs to be ordered alongside.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eFits Any 510 Mod in the Innokin Range and Beyond\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe Ajax uses standard \u003c\/span\u003e\u003cspan\u003e510 threading\u003c\/span\u003e\u003cspan\u003e. It was designed as the tank component of the \u003c\/span\u003e\u003cspan\u003eProton Mini Ajax\u003c\/span\u003e\u003cspan\u003e kit, but it works as a standalone tank on any mod with a 510 pin that pushes 30W or higher. The 24mm diameter sits flush on most mid-range and full-size mods without overhang.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe tank runs on Innokin's \u003c\/span\u003e\u003cspan\u003ePlex3D Matrix coils\u003c\/span\u003e\u003cspan\u003e exclusively. Those are sold as \u003cstrong\u003eInnokin Ajax replacement coils\u003c\/strong\u003e. Other \u003c\/span\u003e\u003cstrong\u003eInnokin\u003c\/strong\u003e\u003cspan\u003e\u003cstrong\u003e coil platforms\u003c\/strong\u003e (Z coils, Endura coils, iSub coils) will not fit.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eAbout Innokin\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eInnokin built most of its UK reputation on\u003cstrong\u003e \u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/mtl-vape-kits\" target=\"_blank\" title=\"MTL Products\" rel=\"noopener\"\u003eMTL Products\u003c\/a\u003e\u003c\/strong\u003e. The Endura T18, the\u003cstrong\u003e Zenith tank\u003c\/strong\u003e, the Zlide: all tight-draw, flavour-focused hardware aimed at ex-smokers. The Ajax was their move into sub-ohm territory, and they approached it the same way: engineer the coil first, then build the tank around it. The \u003cstrong\u003ePlex3D Matrix\u003c\/strong\u003e was the result. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eA three-dimensional mesh structure that heats \u003c\/span\u003e\u003cspan\u003ee-liquid\u003c\/span\u003e\u003cspan\u003e from multiple surfaces at once rather than relying on a single flat strip. Different approach from most sub-ohm brands. Typical Innokin.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eStock Up and Save\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe Ajax is a great tank, but it needs coils. Check whether the listing includes one, and if not, add a pack of Plex3D replacements to the basket alongside the tank itself. Every order from \u003c\/span\u003e\u003cstrong\u003ePirate Vapes\u003c\/strong\u003e\u003cspan\u003e ships the same day before 4 pm in protective packaging. All products are TPD compliant, with an age-verified checkout, over-18s only. Free Pirate Post on orders over £25.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eConclusion\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe \u003cstrong\u003eInnokin Ajax brings Plex3D mesh coils\u003c\/strong\u003e, sliding top fill, and dual adjustable airflow into a compact 24mm body. It is a sub-ohm tank from a brand that normally does MTL, and the engineering carries over. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eIf you own any 510-threaded mod and want strong flavour from a well-built\u003c\/span\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/vape-tanks\"\u003e \u003c\/a\u003e\u003ca title=\"Vape Tank\" href=\"https:\/\/piratevapes.co.uk\/collections\/vape-tanks\" target=\"_blank\"\u003eVape Tank\u003c\/a\u003e\u003c\/strong\u003e\u003cspan\u003e, the Ajax is worth trying. Browse the full range at\u003c\/span\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003cspan\u003e\u003cstrong\u003ePirate Vapes\u003c\/strong\u003e\u003c\/span\u003e\u003cspan\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eFAQs\u003c\/span\u003e\u003c\/h2\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eWhat coils does this tank use?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eInnokin Plex3D Matrix coils.\u003c\/span\u003e\u003cspan\u003e Two resistances: 0.16ohm at 50-80W and 0.35ohm at 30-55W. Both kanthal mesh. No other Innokin coil fits this tank.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eWill it fit on a non-Innokin mod?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eYes. Standard \u003c\/span\u003e\u003cspan\u003e510 thread\u003c\/span\u003e\u003cspan\u003e. Works on any mod that reaches the wattage range these coils require, roughly 30W minimum.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eWhat e-liquid ratio works best?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003e70\/30 VG\/PG or higher\u003c\/span\u003e\u003cspan\u003e with freebase nicotine at 3-6mg. Sub-ohm coils at this wattage are not suited for nic salts or 50\/50 blends.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eHow do I refill the tank?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eSlide the top cap open. Fill through the exposed port. Slide it closed. Takes seconds and can be done one-handed.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eDoes it come with a coil installed?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eCheck the listing carefully. When sold as part of the Proton Mini kit, coils are included. When sold as a standalone tank, coils may need to be purchased separately.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eWhat diameter mod does it need?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe tank is \u003c\/span\u003e\u003cspan\u003e24mm wide\u003c\/span\u003e\u003cspan\u003e. It sits flush on most 24mm and wider mods. On narrower devices, it may overhang slightly.\u003c\/span\u003e\u003c\/p\u003e","brand":"Innokin","offers":[{"title":"Black","offer_id":52534425256218,"sku":null,"price":12.89,"currency_code":"GBP","in_stock":true},{"title":"Blue","offer_id":52534425288986,"sku":null,"price":12.89,"currency_code":"GBP","in_stock":true},{"title":"Stainless Steel","offer_id":52534425321754,"sku":null,"price":12.89,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0995\/5675\/3690\/files\/Innokin_Ajax_Sub_Ohm_Tank.jpg?v=1784268886"},{"product_id":"aspire-nautilus-x-tank","title":"Aspire Nautilus X Tank","description":"\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eAspire Nautilus X Tank \u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eForty-five millimetres tall. That is the entire tank. The \u003cstrong\u003eNautilus X\u003c\/strong\u003e is one of the most compact\u003cstrong\u003e \u003c\/strong\u003e\u003c\/span\u003e\u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/mtl-tanks\" target=\"_blank\" title=\"MTL Tanks\" rel=\"noopener\"\u003e\u003cstrong\u003eMTL Tanks\u003c\/strong\u003e\u003c\/a\u003e\u003cspan\u003e Aspire has ever produced, and the reason it does not leak is that it does not have a bottom airflow hole at all. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe \u003c\/span\u003e\u003cspan\u003e\u003cstrong\u003eU-Tech coil \u003c\/strong\u003esystem\u003c\/span\u003e\u003cspan\u003e draws air in from the top, sends it down through one vertical Kanthal coil, around a U-bend, and back up through the second coil before reaching your mouth. Air passes the coil twice. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe base stays sealed. \u003c\/span\u003e\u003cspan\u003e2ml Pyrex glass tank\u003c\/span\u003e\u003cspan\u003e, \u003c\/span\u003e\u003cspan\u003e510 thread\u003c\/span\u003e\u003cspan\u003e, \u003c\/span\u003e\u003cspan\u003e22mm diameter\u003c\/span\u003e\u003cspan\u003e, adjustable top airflow, top-fill, \u003c\/span\u003e\u003cspan\u003eDelrin drip tip\u003c\/span\u003e\u003cspan\u003e, \u003c\/span\u003e\u003cspan\u003e1.5 ohm coil\u003c\/span\u003e\u003cspan\u003e pre-installed with a spare in the box. Two finishes: \u003c\/span\u003e\u003cspan\u003eBlack\u003c\/span\u003e\u003cspan\u003e and \u003c\/span\u003e\u003cspan\u003eSilver\u003c\/span\u003e\u003cspan\u003e. Over 18s only.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eWhy vapers choose this:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eU-Tech coil\u003c\/span\u003e\u003cspan\u003e passes air through Kanthal twice via a U-shaped chamber. More flavour contact than standard single-pass coils.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eSealed base means no leaking.\u003c\/span\u003e\u003cspan\u003e Top airflow only. The bottom of the tank has no holes. Gravity cannot pull liquid out.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003e45mm x 22mm\u003c\/span\u003e\u003cspan\u003e makes it one of the most compact MTL tanks on the market. Sits flush on any mod.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eTop-fill with adjustable top airflow.\u003c\/span\u003e\u003cspan\u003e Refill without removing the tank. Tighten or loosen the draw from the top ring.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003ePyrex glass + stainless steel.\u003c\/span\u003e\u003cspan\u003e Proper materials. Not plastic.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eAspire Nautilus X Tank Features\u003c\/span\u003e\u003c\/h2\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eThe U-Tech Coil Passes Air Through Twice and That Changes the Flavour\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eStandard coils pull air across the coil once. The \u003c\/span\u003e\u003cspan\u003eU-Tech system\u003c\/span\u003e\u003cspan\u003e routes air down one vertical coil, around a bend at the bottom, and back up through the second. By the time that air reaches your mouth, it has passed through the heating element twice. More contact time with the Kanthal means more vapour extracted per draw. The flavour is noticeably richer than single-pass coils at comparable wattage. Aspire developed this specifically for the Nautilus X, and it remains one of the more unusual coil designs in MTL vaping.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eA Sealed Base Means Leaking Becomes Structurally Impossible\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eMost tanks leak from the bottom. Air comes in through base slots, liquid seeps out through the same path over time. The Nautilus X has \u003c\/span\u003e\u003cspan\u003eno bottom airflow at all\u003c\/span\u003e\u003cspan\u003e. The base is completely sealed. Air enters from the top of the tank instead, which means gravity is working against any liquid trying to escape. In practical terms, you can leave this tank on its side in a bag, in a pocket, on a desk, and the liquid stays inside. That reliability is the reason the Nautilus X built a following despite being a relatively simple tank.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003e45mm Tall Is Barely There\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe Nautilus X adds \u003c\/span\u003e\u003cspan\u003e45mm\u003c\/span\u003e\u003cspan\u003e of height to your mod. Most MTL tanks sit between 50 and 65mm. The difference is visible, and it is significant if you carry your device in a pocket or want a low-profile setup. At \u003c\/span\u003e\u003cspan\u003e22mm diameter,\u003c\/span\u003e\u003cspan\u003e it sits flush on most mods without any overhang. The Pyrex glass section is short but clear enough to check your liquid level, and the stainless steel top cap and base keep the build solid despite the compact size.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eTop-Fill Without Removing the Tank\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eTwist the top cap to expose the fill port. Pour in your\u003c\/span\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/50-50-e-liquids\"\u003e \u003c\/a\u003e\u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/50-50-e-liquids\" target=\"_blank\" title=\"50\/50 E-Liquid\" rel=\"noopener\"\u003e50\/50 E-Liquid\u003c\/a\u003e\u003c\/strong\u003e\u003cspan\u003e\u003cstrong\u003e \u003c\/strong\u003eor nic salt. Twist the cap back. The tank stays on the mod throughout. No unscrewing from the 510 connection, no dripping liquid down the side of your device, no fiddling with bottom-fill ports. The fill hole is wide enough for most nozzle tips.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eThe Delrin Drip Tip Stays Cool at MTL Wattages\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eDelrin is a thermoplastic that does not conduct heat. At \u003c\/span\u003e\u003cspan\u003e14 to 22W\u003c\/span\u003e\u003cspan\u003e through the 1.5 ohm coil, the stainless steel body of the tank warms up during extended use. A metal drip tip would transfer that warmth to your lips. The Delrin tip does not. It stays at room temperature regardless of how long you vape. Minor detail, but it matters during longer sessions.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eAspire Nautilus X Tank Colours\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eTwo finishes. Same internals, same Pyrex, same coil fit.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003e#buttons\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\"\u003eBlack\u003c\/li\u003e\n\u003cli dir=\"ltr\"\u003eSilver\u003cspan\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eHow to Set Up the Aspire Nautilus X Tank \u003c\/span\u003e\u003c\/h2\u003e\n\u003col\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eThe \u003c\/span\u003e\u003cspan\u003e1.5 ohm U-Tech coil\u003c\/span\u003e\u003cspan\u003e ships pre-installed inside the tank. If you want to prime it before filling, tilt the tank and put a couple of drops of e-liquid onto the cotton visible through the coil's wicking ports.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eTwist the \u003c\/span\u003e\u003cspan\u003etop cap\u003c\/span\u003e\u003cspan\u003e to reveal the fill port. Pour in your e-liquid. Close the cap. \u003c\/span\u003e\u003cspan\u003eLeave the tank standing upright for five minutes\u003c\/span\u003e\u003cspan\u003e to let the Kanthal coil wicking saturate fully.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eScrew the tank onto your \u003c\/span\u003e\u003cspan\u003e510-threaded mod\u003c\/span\u003e\u003cspan\u003e. Set your wattage to \u003c\/span\u003e\u003cspan\u003e14W\u003c\/span\u003e\u003cspan\u003e and take a gentle first draw. Work up toward 20 to 22W over the next few pulls as the coil beds in.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eAdjust the \u003c\/span\u003e\u003cspan\u003etop airflow ring\u003c\/span\u003e\u003cspan\u003e to your preference. Tight for a firm MTL pull, slightly open for a looser restricted draw.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eWhat's in the Aspire Nautilus X Tank Box\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eThe Nautilus X tank with a \u003c\/span\u003e\u003cspan\u003e1.5 ohm U-Tech Kanthal coil\u003c\/span\u003e\u003cspan\u003e already installed. \u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eOne spare \u003c\/span\u003e\u003cspan\u003e1.5 ohm coil\u003c\/span\u003e\u003cspan\u003e. \u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eOne \u003c\/span\u003e\u003cspan\u003eDelrin drip tip\u003c\/span\u003e\u003cspan\u003e. \u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eOne replacement \u003c\/span\u003e\u003cspan\u003ePyrex glass tube\u003c\/span\u003e\u003cspan\u003e. \u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eUser manual. \u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eNo mod, no battery, no e-liquid. You need a 510-threaded mod and\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003ecompatible e-liquid\u003c\/span\u003e\u003cspan\u003e to use this tank.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eBuilt for Nautilus X U-Tech Coils and Any 510 Mod\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe Nautilus X uses \u003c\/span\u003e\u003cspan\u003eAspire Nautilus X U-Tech coils\u003c\/span\u003e\u003cspan\u003e, available in two resistances: \u003c\/span\u003e\u003cspan\u003e1.5 ohm at 14 to 22W\u003c\/span\u003e\u003cspan\u003e and \u003c\/span\u003e\u003cspan\u003e1.8 ohm at 12 to 16W\u003c\/span\u003e\u003cspan\u003e. Both are Kanthal with organic cotton wicking.\u003c\/span\u003e\u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/aspire-coils\"\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/a\u003e\u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/aspire-coils\" target=\"_blank\" title=\"Replacement Nautilus X Coils\" rel=\"noopener\"\u003e\u003cstrong\u003eReplacement Nautilus X Coils\u003c\/strong\u003e\u003c\/a\u003e\u003cspan\u003e are widely stocked. The coils are also cross-compatible with the \u003c\/span\u003e\u003cspan\u003eAspire Nautilus XS\u003c\/span\u003e\u003cspan\u003e tank.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe tank screws onto any \u003c\/span\u003e\u003cspan\u003e510-threaded mod\u003c\/span\u003e\u003cspan\u003e. At 22mm diameter, it sits flush on virtually every mod on the market. Set your wattage between 12 and 22W depending on your coil choice.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003e\u003cstrong\u003eE-liquid:\u003c\/strong\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/50-50-e-liquids\" target=\"_blank\" title=\"50\/50 VG\/PG\" rel=\"noopener\"\u003e\u003cstrong\u003e50\/50 VG\/PG\u003c\/strong\u003e\u003c\/a\u003e\u003cspan\u003e at 6mg to 20mg works best.\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003eNic salts\u003c\/span\u003e\u003cspan\u003e at 10 or 20mg pair well with the 1.8 ohm coil. Freebase at 6 to 12mg suits the 1.5 ohm. The U-Tech coil handles higher-VG blends better than most MTL coils thanks to larger wicking ports, but 50\/50 remains the safest match.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eAbout Aspire\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eAspire has been manufacturing vape hardware out of \u003c\/span\u003e\u003cspan\u003eShenzhen, China\u003c\/span\u003e\u003cspan\u003e since 2013, which makes them one of the oldest brands still actively producing. The \u003c\/span\u003e\u003cspan\u003eNautilus series\u003c\/span\u003e\u003cspan\u003e is the product line that built their reputation: the original Nautilus BVC tank was one of the first genuinely good MTL tanks on the market, and the Nautilus X, Nautilus 2, Nautilus 3, and Nautilus XS have carried that legacy forward. Aspire also produces the \u003c\/span\u003e\u003cspan\u003ePockeX\u003c\/span\u003e\u003cspan\u003e, \u003c\/span\u003e\u003cspan\u003eGotek\u003c\/span\u003e\u003cspan\u003e, \u003c\/span\u003e\u003cspan\u003eCleito\u003c\/span\u003e\u003cspan\u003e, and \u003c\/span\u003e\u003cspan\u003eTriton\u003c\/span\u003e\u003cspan\u003e ranges. Browse the full\u003c\/span\u003e\u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/aspire-vape\"\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/a\u003e\u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/aspire-vape\" target=\"_blank\" title=\"Aspire Collection\" rel=\"noopener\"\u003e\u003cstrong\u003eAspire Collection\u003c\/strong\u003e\u003c\/a\u003e\u003cspan\u003e at Pirate Vapes.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eStock Up and Save\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eTwo coils in the box. The spare buys you a couple of weeks, but after that you need more. Grab a five-pack of\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eNautilus X U-Tech coils\u003c\/strong\u003e\u003cspan\u003e alongside the tank, and you are covered for well over a month. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eEvery tank ships \u003c\/span\u003e\u003cspan\u003ewrapped and cushioned\u003c\/span\u003e\u003cspan\u003e to protect the Pyrex during transit. We verify age before dispatch, send tracked, and get orders out the same day when placed by 4 pm. Over 18s only. Reach £25, and \u003c\/span\u003e\u003cspan\u003eFree Pirate Post\u003c\/span\u003e\u003cspan\u003e handles your delivery.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eConclusion\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe \u003cstrong\u003eNautilus X\u003c\/strong\u003e does two things that most \u003cstrong\u003eMTL tanks\u003c\/strong\u003e do not: it passes air through the coil twice, and it seals the base completely so it cannot leak. At 45mm tall and 22mm wide, it is one of the smallest 510 tanks you can buy, and the\u003cstrong\u003e U-Tech coil\u003c\/strong\u003e system produces richer MTL flavour than standard single-pass designs at comparable wattage. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eIf you want a compact, leak-proof MTL tank that fits any mod and runs on a proven coil platform, the \u003cstrong\u003eNautilus X\u003c\/strong\u003e is difficult to argue against. Pick one up at\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003ePirate Vapes\u003c\/strong\u003e\u003cspan\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eFAQs\u003c\/span\u003e\u003c\/h2\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eWhat coils does the Nautilus X use?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eU-Tech coils\u003c\/span\u003e\u003cspan\u003e in 1.5 ohm (14-22W) and 1.8 ohm (12-16W). Kanthal with organic cotton. Cross-compatible with the Nautilus XS tank.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eDoes the Nautilus X leak?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eNo. The base is sealed with no bottom airflow holes. Air enters from the top only. Leaking from the base is structurally impossible.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eWhat mods does the Nautilus X fit?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eAny mod with a \u003c\/span\u003e\u003cspan\u003e510 thread\u003c\/span\u003e\u003cspan\u003e. The 22mm diameter sits flush on most devices without overhang.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eWhat e-liquid works best with the Nautilus X?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003e50\/50 VG\/PG. Nic salts at 10 to 20mg with the 1.8 ohm coil. Freebase at 6 to 12mg with the 1.5 ohm. MTL wattages only.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eIs the Nautilus X an MTL or DTL tank?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eMTL.\u003c\/span\u003e\u003cspan\u003e Tight draw with the airflow closed, slightly looser with it open. Not a DTL tank. Not designed for sub-ohm use.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eDoes the Nautilus X come with a mod?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eNo. Tank only. You need a 510-threaded mod, e-liquid, and a charged battery to use it.\u003c\/span\u003e\u003c\/p\u003e","brand":"Aspire","offers":[{"title":"Black","offer_id":52534435545370,"sku":null,"price":17.95,"currency_code":"GBP","in_stock":true},{"title":"Silver","offer_id":52534435578138,"sku":null,"price":17.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0995\/5675\/3690\/files\/Aspire_Nautilus_X_Tank.jpg?v=1784268755"},{"product_id":"aspire-nautilus-nano-tank","title":"Aspire Nautilus Nano Tank","description":"\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eAspire Nautilus Nano Tank\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eNineteen and a half millimetres wide. That makes the \u003cstrong\u003eNautilus Nano\u003c\/strong\u003e one of the slimmest\u003c\/span\u003e\u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/mtl-tanks\"\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/a\u003e\u003ca title=\"MTL Tanks\" href=\"https:\/\/piratevapes.co.uk\/collections\/mtl-tanks\" target=\"_blank\"\u003e\u003cstrong\u003eMTL Tanks\u003c\/strong\u003e\u003c\/a\u003e\u003cspan\u003e\u003cstrong\u003e \u003c\/strong\u003estill available from a major brand. It holds \u003c\/span\u003e\u003cspan\u003e2ml\u003c\/span\u003e\u003cspan\u003e, uses \u003cstrong\u003eAspire's \u003c\/strong\u003e\u003c\/span\u003e\u003cstrong\u003eNautilus BVC coils\u003c\/strong\u003e\u003cspan\u003e, and ships with a \u003c\/span\u003e\u003cspan\u003e1.0ohm\u003c\/span\u003e\u003cspan\u003e and a \u003c\/span\u003e\u003cspan\u003e1.8ohm\u003c\/span\u003e\u003cspan\u003e head in the box. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eBottom adjustable airflow lets you tighten the draw from a restricted MTL right down to something that feels genuinely close to a cigarette. \u003c\/span\u003e\u003cspan\u003e510 threaded\u003c\/span\u003e\u003cspan\u003e, top fill, \u003cstrong\u003estainless steel\u003c\/strong\u003e and glass body. Compact enough to sit on a pen-style battery without looking oversized. Spare glass and\u003cstrong\u003e O-rings\u003c\/strong\u003e included.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eWhy vapers choose this:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eUnder 20mm diameter\u003c\/span\u003e\u003cspan\u003e means it sits flush on slim pen-style batteries and small mods where wider tanks would overhang or look awkward\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eNautilus BVC coils are one of the most widely available coil types in UK vaping\u003c\/span\u003e\u003cspan\u003e, so finding replacements is never a problem regardless of where you shop\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eBottom adjustable airflow\u003c\/span\u003e\u003cspan\u003e gives genuine range from a loose MTL to a properly tight cigarette-style draw, which not every small tank manages\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eTwo coils in the box\u003c\/span\u003e\u003cspan\u003e at different resistances let you find your preference before committing to a full pack of replacements\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eSpare glass and O-rings included\u003c\/span\u003e\u003cspan\u003e is generous for a tank at this price point and saves a separate order if you crack the glass\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eAspire Nautilus Nano Tank Features\u003c\/span\u003e\u003c\/h2\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eGenuinely Small\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eAt 19.56mm across, this is a tank you can carry without it sticking out. It fits in a shirt pocket with a pen mod attached. It sits on a 22mm mod with room to spare on each side. For vapers who want something compact that does not compromise on MTL draw quality, size alone is a reason to pick the Nano over the larger Nautilus models.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eNautilus BVC Coils Are Everywhere\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe Nautilus coil family has been around for years, and that longevity is a practical advantage. You will find replacement BVC coils in almost every vape shop in the country, and they are widely stocked online. No worrying about niche coil platforms going out of stock. The 1.0ohm and 1.8ohm that come in the box are the standard Nautilus\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003ecoils\u003c\/span\u003e\u003cspan\u003e, which means you have a deep supply chain behind this tank.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eBottom Airflow With Real Adjustment Range\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe airflow ring on the base is not just decorative. Turning it gives you a noticeable change in draw resistance. All the way open is a looser MTL that produces a small amount of visible vapour. Tighten it right down, and the draw becomes restrictive enough to feel like pulling on a cigarette. Most people land somewhere in between, but having the full range matters if you are particular about your draw.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eTop Fill Without Drama\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eUnscrew the top cap, fill through the port, screw it back. The fill hole is wide enough for most bottle nozzles and dropper tips. No side ports, no sliding mechanisms, no buttons. Clean and simple. On a tank this size, a complicated filling system would be more trouble than it is worth.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003ePairs Well With Thinner Liquids\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe BVC coil wicking is sized for \u003c\/span\u003e\u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/50-50-e-liquids\" title=\"50\/50 VG\/PG\" target=\"_blank\"\u003e\u003cstrong\u003e50\/50 VG\/PG\u003c\/strong\u003e\u003c\/a\u003e\u003cspan\u003e or higher-PG blends.\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003eNic salts\u003c\/span\u003e\u003cspan\u003e at 10-20mg in a 50\/50 ratio work particularly well. \u003ca title=\"High VG Juice\" href=\"https:\/\/piratevapes.co.uk\/collections\/high-vg-e-liquid\" target=\"_blank\"\u003e\u003cstrong\u003eHigh VG Juice\u003c\/strong\u003e\u003c\/a\u003e above 60\/40 will struggle to wick at this diameter and wattage. Stick to the thinner end, and the flavour stays clean for the full life of each coil.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eAspire Nautilus Nano Tank Colours\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThree finishes. All stainless steel and glass construction:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e#buttons\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli data-end=\"76\" data-start=\"67\" data-section-id=\"t3dqof\"\u003eBlack\u003cspan class=\"PDq2pG_selectionAnchor\" aria-hidden=\"true\"\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"89\" data-start=\"77\" data-section-id=\"a7stb9\"\u003eGunmetal\u003c\/li\u003e\n\u003cli data-is-last-node=\"\" data-end=\"98\" data-start=\"90\" data-section-id=\"649fkv\"\u003eSilver\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eHow to Set Up the Aspire Nautilus Nano Tank\u003c\/span\u003e\u003c\/h2\u003e\n\u003col\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eUnscrew the base of the tank and thread one of the included \u003c\/span\u003e\u003cspan\u003eNautilus BVC coils\u003c\/span\u003e\u003cspan\u003e in clockwise. Finger-tight.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eDrop \u003c\/span\u003e\u003cspan\u003etwo to three drops of\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003ee-liquid\u003c\/span\u003e\u003cspan\u003e onto the cotton through the side ports to pre-saturate the wick.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eScrew the base back on and attach the tank to your mod or pen battery via the \u003c\/span\u003e\u003cspan\u003e510 thread\u003c\/span\u003e\u003cspan\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eUnscrew the \u003c\/span\u003e\u003cspan\u003etop cap\u003c\/span\u003e\u003cspan\u003e and fill with 50\/50 or higher-PG liquid up to the fill line.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eReplace the cap and let the tank stand upright for around \u003c\/span\u003e\u003cspan\u003efour to five minutes\u003c\/span\u003e\u003cspan\u003e before you take the first pull.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eAdjust the \u003c\/span\u003e\u003cspan\u003ebottom airflow ring\u003c\/span\u003e\u003cspan\u003e to your preferred tightness and start vaping at low wattage.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eWhat's in the Aspire Nautilus Nano Tank Box\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eOne Nautilus Nano tank in your selected colour. \u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eOne \u003c\/span\u003e\u003cspan\u003e1.0ohm Nautilus BVC coil\u003c\/span\u003e\u003cspan\u003e. \u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eOne \u003c\/span\u003e\u003cspan\u003e1.8ohm Nautilus BVC coil\u003c\/span\u003e\u003cspan\u003e. \u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eOne spare glass tube. \u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eOne pack of O-rings. \u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eAnd a user manual. \u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eSolid package for the price.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eThe Compact MTL Tank for Aspire's Nautilus Coil Family\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe \u003cstrong\u003eNautilus Nano \u003c\/strong\u003euses \u003cstrong\u003eAspire's \u003c\/strong\u003e\u003c\/span\u003e\u003cstrong\u003eNautilus BVC\u003c\/strong\u003e\u003cspan\u003e\u003cstrong\u003e coil\u003c\/strong\u003e platform. That is the same coil family used across the Nautilus, Nautilus 2, and Nautilus Mini. If you own any of those tanks, you already have coils that work in the Nano.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003e\u003cstrong\u003eWhat does not fit:\u003c\/strong\u003e \u003cstrong\u003eNautilus X coils (\u003c\/strong\u003edifferent platform entirely), \u003cstrong\u003eNautilus GT coils,\u003c\/strong\u003e and any of Aspire's pod or mesh coil systems. Stick to the standard \u003c\/span\u003e\u003cspan\u003eNautilus BVC\u003c\/span\u003e\u003cspan\u003e heads, and you are set. The 1.0ohm and 1.8ohm are the standard options, but other BVC resistances exist in the\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/aspire-vapes\" target=\"_blank\" title=\"Aspire Range\" rel=\"noopener\"\u003e\u003cstrong\u003eAspire\u003c\/strong\u003e\u003c\/a\u003e\u003cspan\u003e\u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/aspire-vapes\"\u003e\u003cstrong\u003e Range\u003c\/strong\u003e\u003c\/a\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eAbout Aspire\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe Nautilus was one of the first MTL tanks that vapers in the UK genuinely trusted. When it launched, most tanks were either clearomiser tubes with weak flavour or oversized sub-ohm setups that had no interest in tight draws. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe Nautilus filled that gap, and the \u003cstrong\u003eBVC coil \u003c\/strong\u003einside it became the standard that other MTL coils were measured against for years. The Nano is the smallest version of that original design. Same coil, same airflow philosophy, just built into a body that barely adds any width to a pen battery.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eStock Up and Save\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eTwo coils and a spare glass in the box. For a tank this affordable, that is a strong start. Adding a pack of \u003cstrong\u003eNautilus BVC coils \u003c\/strong\u003eto your basket means you are covered for several weeks before you need to reorder. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eEvery order from \u003c\/span\u003e\u003cstrong\u003ePirate Vapes\u003c\/strong\u003e\u003cspan\u003e\u003cstrong\u003e \u003c\/strong\u003eships the same day before 4 pm, carefully packed. All products are TPD compliant, with an age-verified checkout, over-18s only. Free Pirate Post on orders over £25.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eConclusion\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe \u003cstrong\u003eNautilus Nano \u003c\/strong\u003eis a compact, well-priced \u003cstrong\u003eMTL tank\u003c\/strong\u003e that runs on one of the most widely available coil platforms in UK vaping. Two coils in the box, spare glass included, bottom airflow that actually adjusts. It does not try to do anything fancy. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eIt just delivers a tight, flavourful MTL draw from a body that barely takes up any space. Browse more\u003c\/span\u003e\u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/vape-accessories\" target=\"_blank\" title=\"Vape Accessories \" rel=\"noopener\"\u003e\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eVape Accessories\u003c\/strong\u003e\u003c\/a\u003e\u003cspan\u003e at\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003ePirate Vapes\u003c\/strong\u003e\u003cspan\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eFAQs\u003c\/span\u003e\u003c\/h2\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eWhat coils does this tank use?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eNautilus BVC coils.\u003c\/span\u003e\u003cspan\u003e Same as the full-size Nautilus and the Nautilus 2. The 1.0ohm and 1.8ohm come in the box. Other BVC resistances are available separately.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eWhat e-liquid works best?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003e50\/50 VG\/PG\u003c\/span\u003e\u003cspan\u003e or higher-PG blends. Nic salts at 10-20mg pair well. High VG above 60\/40 will not wick properly in this tank.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eWill it fit on a pen battery?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eYes. At \u003c\/span\u003e\u003cspan\u003e19.56 mm in diameter\u003c\/span\u003e\u003cspan\u003e, it fits comfortably on most pen-style batteries and slim mods without overhang.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eHow do I adjust the airflow?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eTurn the \u003c\/span\u003e\u003cspan\u003ering at the base\u003c\/span\u003e\u003cspan\u003e of the tank. Clockwise tightens the draw. Anti-clockwise opens it up.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eDoes it come with a spare glass?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eYes. One \u003c\/span\u003e\u003cspan\u003espare glass tube\u003c\/span\u003e\u003cspan\u003e and a set of O-rings are included in the box.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eIs this an MTL or DTL tank?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eMTL only.\u003c\/span\u003e\u003cspan\u003e The BVC coils and airflow design are built specifically for mouth-to-lung vaping. It is not suited for direct-to-lung use.\u003c\/span\u003e\u003c\/p\u003e","brand":"Aspire","offers":[{"title":"Black","offer_id":52537083494682,"sku":null,"price":9.99,"currency_code":"GBP","in_stock":true},{"title":"Gunmetal","offer_id":52537083527450,"sku":null,"price":9.99,"currency_code":"GBP","in_stock":true},{"title":"Silver","offer_id":52537083560218,"sku":null,"price":9.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0995\/5675\/3690\/files\/Aspire_Nautilus_Nano_Tank.jpg?v=1784281322"},{"product_id":"voopoo-pnp-pod-tank","title":"Voopoo PNP Pod Replacement Tank","description":"\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eVooPoo PnP Pod Tank\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eHalf pod, half tank, fully 510-threaded. The \u003cstrong\u003ePnP Pod Tank \u003c\/strong\u003etakes everything VooPoo built into the \u003cstrong\u003ePnP coil platform \u003c\/strong\u003eand puts it inside a \u003c\/span\u003e\u003cspan\u003e26mm tank body\u003c\/span\u003e\u003cspan\u003e that screws onto any mod. Same \u003c\/span\u003e\u003cstrong\u003ePnP coils\u003c\/strong\u003e\u003cspan\u003e that run in the \u003cstrong\u003eDrag X, Drag S, \u003c\/strong\u003eand \u003cstrong\u003eDrag 3.\u003c\/strong\u003e Same mesh options. Same coil stock. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eBut instead of clicking into a pod device, this tank sits on a 510 connection like a traditional sub-ohm tank. \u003c\/span\u003e\u003cspan\u003e2ml capacity\u003c\/span\u003e\u003cspan\u003e, \u003c\/span\u003e\u003cspan\u003edual adjustable bottom airflow\u003c\/span\u003e\u003cspan\u003e, \u003c\/span\u003e\u003cspan\u003ebottom-fill\u003c\/span\u003e\u003cspan\u003e, two \u003c\/span\u003e\u003cspan\u003emesh coils\u003c\/span\u003e\u003cspan\u003e in the box \u003cstrong\u003e(0.3 ohm VM1 and 0.15 ohm VM5)\u003c\/strong\u003e, stainless steel and \u003cstrong\u003ePCTG \u003c\/strong\u003econstruction. Two colours: \u003c\/span\u003e\u003cspan\u003eBlack\u003c\/span\u003e\u003cspan\u003e and \u003c\/span\u003e\u003cspan\u003eSilver\u003c\/span\u003e\u003cspan\u003e. Over 18s only.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eWhy vapers choose this:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003ePnP coils on a 510 mod.\u003c\/span\u003e\u003cspan\u003e Use VooPoo's pod coils in a traditional tank format for the first time.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eCross-compatible coil stock\u003c\/span\u003e\u003cspan\u003e with the Drag X, Drag S, Drag 3, Vinci, and every PnP-compatible device\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003e26mm diameter\u003c\/span\u003e\u003cspan\u003e sits flush on most box mods. Compact for a sub-ohm tank.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eMTL and DTL\u003c\/span\u003e\u003cspan\u003e from one tank. The VM1 at 0.3 ohm handles restricted draws. The VM5 at 0.15 ohm opens into full DTL.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eTwo mesh coils included\u003c\/span\u003e\u003cspan\u003e with different resistances. Try both draw styles from the box.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eVooPoo PnP Pod Tank Features\u003c\/span\u003e\u003c\/h2\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003ePnP Coils on a 510 Thread Is the Whole Point\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eVooPoo designed the PnP coil system for their pod kits. The Drag X, Drag S, Drag 3, and Vinci all use PnP coils in pod cartridges. The PnP Pod Tank takes those same coils and puts them inside a 510-threaded tank body instead. Why does that matter? Because it means any mod you own becomes a PnP device. You are no longer limited to VooPoo's pod kits to use PnP coils. Screw this tank onto a Geekvape mod, a SMOK mod, a Vaporesso mod. The coils do not care what device they sit on.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eBottom Fill Is Unusual, and There Is a Reason for It\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eMost modern tanks fill from the top. The PnP Pod Tank fills from the bottom. You unscrew the base, pour in your\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003ee-liquid\u003c\/span\u003e\u003cspan\u003e, and screw the base back on. It is slightly less convenient than a top-fill, but the design keeps the top of the tank clean and allows VooPoo to maintain the same internal geometry as the PnP pod cartridge. The coil sits in the same position, the airflow routes through the same path, and the flavour output matches what you would get from a Drag pod. That consistency is the trade-off for bottom filling.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eThe VM1 and VM5 Cover Both Ends of the Draw Spectrum\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe \u003c\/span\u003e\u003cspan\u003eVM1 at 0.3 ohm\u003c\/span\u003e\u003cspan\u003e runs at lower wattage with a tighter, more restricted draw. Good for flavour-focused DTL vaping or a loose MTL pull with\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003enic salts\u003c\/span\u003e\u003cspan\u003e at 10mg. The \u003c\/span\u003e\u003cspan\u003eVM5 at 0.15 ohm\u003c\/span\u003e\u003cspan\u003e pushes harder for denser cloud production and a wider open draw. Both are mesh. Both deliver clean flavour. The VM1 lasts longer per coil because of the lower power draw. The VM5 goes through liquid faster but produces noticeably more vapour.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003e26mm and PCTG Keeps the Weight Down\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe tank body combines \u003c\/span\u003e\u003cspan\u003estainless steel\u003c\/span\u003e\u003cspan\u003e with \u003c\/span\u003e\u003cspan\u003ePCTG plastic\u003c\/span\u003e\u003cspan\u003e, which makes it lighter than an all-steel tank of the same size. At \u003c\/span\u003e\u003cspan\u003e26mm,\u003c\/span\u003e\u003cspan\u003e it matches the width of the Geekvape Zeus Sub Ohm and sits flush on most box mods. The PCTG section is transparent enough to check liquid level, and the material does not crack from contact with acidic or citrus-based e-liquids the way some glass alternatives can.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eOne Coil Platform Across Pods and Tanks\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eOwn a Drag X for portable use and want the same coils in a home setup on a bigger mod? The PnP Pod Tank solves that. Your PnP coil stock works in both. No buying two different coil families for two different devices. Browse\u003c\/span\u003e\u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/voopoo-coils\"\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/a\u003e\u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/voopoo-coils\" target=\"_blank\" title=\"VooPoo PnP Coils\" rel=\"noopener\"\u003e\u003cstrong\u003eVooPoo PnP Coils\u003c\/strong\u003e\u003c\/a\u003e\u003cspan\u003e for the full resistance range beyond the VM1 and VM5 included in the box.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eVooPoo PnP Pod Tank Colours\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eTwo finishes. Same internals, same coil fit.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003e#buttons\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\"\u003eBlack\u003c\/li\u003e\n\u003cli dir=\"ltr\"\u003eSilver\u003cspan\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eHow to Set Up the VooPoo PnP Pod Tank\u003c\/span\u003e\u003c\/h2\u003e\n\u003col\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eUnscrew the base\u003c\/span\u003e\u003cspan\u003e of the tank. The PnP-VM5 0.15 ohm coil may already be fitted. If not, push the coil into the base until it clicks.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003ePrime the coil.\u003c\/span\u003e\u003cspan\u003e Drip a few drops of e-liquid onto the cotton visible through the mesh openings. This pre-wets the cotton before filling.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eFill through the base.\u003c\/span\u003e\u003cspan\u003e With the base unscrewed, pour your\u003c\/span\u003e\u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/70-30-shortfills\"\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/a\u003e\u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/70-30-shortfills\" target=\"_blank\" title=\"70\/30 E-Liquid\" rel=\"noopener\"\u003e\u003cstrong\u003e70\/30 E-Liquid\u003c\/strong\u003e\u003c\/a\u003e\u003cspan\u003e into the tank from the bottom opening. Screw the base back on tightly.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eStand the tank upright for five minutes.\u003c\/span\u003e\u003cspan\u003e The mesh coil needs time to soak. Firing before saturation means a burnt coil on draw one.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eScrew the tank onto your \u003c\/span\u003e\u003cspan\u003e510 mod\u003c\/span\u003e\u003cspan\u003e. Set wattage to suit the coil (start low, work up). Adjust the dual bottom airflow ring to your preferred tightness.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eWhat's in the VooPoo PnP Pod Tank Box\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eThe PnP Pod Tank in your chosen finish. \u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eOne PnP-VM1 0.3 ohm mesh coil. \u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eOne PnP-VM5 0.15 ohm mesh coil (may be pre-installed). \u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eA bag of spare O-rings and parts. \u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eNo mod, no battery, no e-liquid. You need a 510 mod and\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003ecompatible liquid\u003c\/span\u003e\u003cspan\u003e to use this tank.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eRuns the Entire PnP Coil Range on Any 510 Mod\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe PnP Pod Tank accepts every coil in VooPoo's \u003c\/span\u003e\u003cspan\u003ePnP range\u003c\/span\u003e\u003cspan\u003e, not just the VM1 and VM5. That includes MTL coils, RDL coils, ceramic options, and higher-resistance variants.\u003c\/span\u003e\u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/vape-coils\"\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/a\u003e\u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/voopoo-pnp-coils\" target=\"_blank\" title=\"Replacement PnP Coils\" rel=\"noopener\"\u003e\u003cstrong\u003eReplacement PnP Coils\u003c\/strong\u003e\u003c\/a\u003e\u003cspan\u003e are among the most widely stocked coil options in UK retail.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe tank screws onto any \u003c\/span\u003e\u003cspan\u003e510-threaded mod\u003c\/span\u003e\u003cspan\u003e. At 26mm diameter, it fits most devices without overhang. Compatible with but not limited to the \u003c\/span\u003e\u003cspan\u003eDrag X, Drag S, Drag 3\u003c\/span\u003e\u003cspan\u003e, and any other mod with a 510 connection. Browse the\u003c\/span\u003e\u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/voopoo-vapes\"\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/a\u003e\u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/voopoo-vapes\" target=\"_blank\" title=\"VooPoo Range\" rel=\"noopener\"\u003e\u003cstrong\u003eVooPoo Range\u003c\/strong\u003e\u003c\/a\u003e\u003cspan\u003e for compatible devices.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003e\u003cstrong\u003eE-liquid:\u003c\/strong\u003e \u003c\/span\u003e\u003cspan\u003e50\/50 or 70\/30 VG\/PG\u003c\/span\u003e\u003cspan\u003e depending on coil. The VM5 at 0.15 ohm handles 70\/30 at 3 to 6mg freebase. The VM1 at 0.3 ohm works with 50\/50 at 6 to 10mg or nic salts at 10mg. Avoid 20mg nic salts through the VM5.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eAbout VooPoo\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eVooPoo sits in \u003c\/span\u003e\u003cspan\u003eShenzhen, China,\u003c\/span\u003e\u003cspan\u003e and launched the Drag series in 2017. The \u003c\/span\u003e\u003cspan\u003eGENE chip\u003c\/span\u003e\u003cspan\u003e powers their regulated mods, the \u003c\/span\u003e\u003cspan\u003eTPP coil platform\u003c\/span\u003e\u003cspan\u003e runs their high-wattage tanks, and the \u003c\/span\u003e\u003cspan\u003ePnP coil platform\u003c\/span\u003e\u003cspan\u003e covers everything from pod kits to this 510 tank.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe PnP system is one of the widest coil ecosystems in vaping: one coil format across pods, tanks, and multiple device generations. That kind of backward and forward compatibility is VooPoo's main structural advantage over competing brands.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eStock Up and Save\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eTwo coils in the box. Once those wear down, \u003c\/span\u003e\u003cspan\u003egrab a \u003cstrong\u003efive-pack\u003c\/strong\u003e\u003c\/span\u003e\u003cspan\u003e\u003cstrong\u003e of PnP coils\u003c\/strong\u003e in your preferred resistance, and you are set for over a month. Every tank ships \u003c\/span\u003e\u003cspan\u003esealed in its original \u003cstrong\u003eVooPoo packaging\u003c\/strong\u003e\u003c\/span\u003e\u003cspan\u003e with the glass and coils protected inside. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eWe dispatch before 4 pm on weekdays, tracked all the way, 18+ verified. Over £25 unlocks \u003c\/span\u003e\u003cspan\u003eFree Pirate Post\u003c\/span\u003e\u003cspan\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eConclusion\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe \u003cstrong\u003ePnP Pod Tank \u003c\/strong\u003eis a \u003cstrong\u003e510 tank \u003c\/strong\u003ethat runs pod coils. That single concept is the reason it exists and the reason it works. PnP coils on any mod. One coil stock across your pod kit and your box mod. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eMTL and DTL from the same tank depending on your coil choice. If you are already inside \u003cstrong\u003eVooPoo's PnP ecosystem \u003c\/strong\u003eand want a 510 option, or if you own a \u003cstrong\u003enon-VooPoo mod \u003c\/strong\u003eand want access to \u003cstrong\u003ePnP coils\u003c\/strong\u003e, this tank bridges the gap. Pick one up at\u003c\/span\u003e\u003cstrong\u003e Pirate Vapes\u003c\/strong\u003e\u003cspan\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eFAQs\u003c\/span\u003e\u003c\/h2\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eCan I use PnP coils from my Drag pod in this tank?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eYes. The PnP Pod Tank accepts every coil in the PnP range. Your existing coils from the Drag X, Drag S, Drag 3, or Vinci fit directly.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eIs the PnP Pod Tank top-fill or bottom-fill?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eBottom fill.\u003c\/span\u003e\u003cspan\u003e Unscrew the base, pour in liquid, screw back on. Less convenient than top-fill but maintains the same coil geometry as the PnP pod cartridge.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eWhat mods does the PnP Pod Tank fit?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eAny \u003c\/span\u003e\u003cspan\u003e510-threaded mod\u003c\/span\u003e\u003cspan\u003e. The 26mm diameter sits flush on most box mods.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eWhat e-liquid works best?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eVM5 (0.15 ohm): 70\/30 VG\/PG at 3 to 6mg freebase. VM1 (0.3 ohm): 50\/50 at 6 to 10mg or nic salts at 10mg. Avoid 20mg salt through the VM5.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eHow many colours does the PnP Pod Tank come in?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eTwo: \u003c\/span\u003e\u003cspan\u003eBlack\u003c\/span\u003e\u003cspan\u003e and \u003c\/span\u003e\u003cspan\u003eSilver\u003c\/span\u003e\u003cspan\u003e.\u003c\/span\u003e\u003c\/p\u003e","brand":"VooPoo","offers":[{"title":"Black","offer_id":52537114820890,"sku":null,"price":14.99,"currency_code":"GBP","in_stock":true},{"title":"Silver","offer_id":52537114853658,"sku":null,"price":14.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0995\/5675\/3690\/files\/Voopoo_PNP_Pod_Replacement_Tank.jpg?v=1784282023"},{"product_id":"innokin-go-s-disposable-tank","title":"Innokin Go-S Disposable Tank","description":"\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eInnokin Go-S Disposable Tank\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eA \u003c\/span\u003e\u003cstrong\u003e1.6ohm Kanthal coil\u003c\/strong\u003e\u003cspan\u003e\u003cstrong\u003e \u003c\/strong\u003esealed inside a \u003c\/span\u003e\u003cspan\u003e2ml\u003c\/span\u003e\u003cspan\u003e tank that you never open, never maintain, and never rewick. That is the entire pitch. The\u003cstrong\u003e Innokin Go-S \u003c\/strong\u003eis a disposable\u003c\/span\u003e\u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/mtl-tanks\"\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/a\u003e\u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/mtl-tanks\" target=\"_blank\" title=\"MTL Tank\" rel=\"noopener\"\u003e\u003cstrong\u003eMTL Tank\u003c\/strong\u003e\u003c\/a\u003e\u003cspan\u003e\u003cstrong\u003e \u003c\/strong\u003ewith a slide-open top fill, adjustable bottom airflow, and a \u003c\/span\u003e\u003cspan\u003e510 thread\u003c\/span\u003e\u003cspan\u003e that screws onto pen batteries and box mods alike. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eFill it with\u003cstrong\u003e \u003c\/strong\u003e\u003c\/span\u003e\u003cspan\u003e\u003cstrong\u003e50\/50\u003c\/strong\u003e or \u003cstrong\u003ehigher-PG e-liquid\u003c\/strong\u003e\u003c\/span\u003e\u003cspan\u003e, vape it until the flavour goes flat, bin it, screw on a fresh one. Coil changes? Gone. Priming anxiety? Gone. The whole thing runs at \u003c\/span\u003e\u003cstrong\u003e10 to 14W\u003c\/strong\u003e\u003cspan\u003e and sits at just \u003c\/span\u003e\u003cspan\u003e20mm\u003c\/span\u003e\u003cspan\u003e across. Food-grade\u003cstrong\u003e \u003c\/strong\u003e\u003c\/span\u003e\u003cstrong\u003ePCTG plastic\u003c\/strong\u003e\u003cspan\u003e, organic cotton wicking blended with wood-pulp, and three colours in the store picker. Over 18s only.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eWhy vapers choose the Go-S Tank:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eNo coil swaps. Period.\u003c\/span\u003e\u003cspan\u003e The coil lives inside the tank permanently. Flavour drops off after a couple of weeks, you toss the tank and click a new one on. Costs about the same as a standalone replacement coil from most brands, so the maths works out.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eAdjustable airflow at this price\u003c\/span\u003e\u003cspan\u003e is unusual, and it genuinely matters. The bottom ring takes the draw from cigarette-tight all the way to a slightly open MTL pull. Most disposable tanks give you one fixed draw, and that is that.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eSlide-fill keeps things clean.\u003c\/span\u003e\u003cspan\u003e Push the top cap across, tilt your bottle in, slide it shut. No removing the tank from the battery, no dripping into awkward ports.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eWood-pulp in the wicking\u003c\/span\u003e\u003cspan\u003e is an Innokin touch. It pulls liquid faster than pure cotton, which means fewer dry hits when the tank runs low. You notice it.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003e510 thread\u003c\/span\u003e\u003cspan\u003e screws onto basically anything. Your old box mod collecting dust? This fits it.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eInnokin Go-S Disposable Tank Features\u003c\/span\u003e\u003c\/h2\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eCoil Changes Are the Worst Part of Vaping. So Skip Them.\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThink about it. Replacement coils for most MTL tanks run somewhere between £2 and £5 each. The Go-S tank costs about the same, coil included. So you are paying roughly equivalent money, except you also get a fresh tank body, fresh wicking, a fresh silicone seal, and zero chance of a botched prime ruining the coil before you have even taken a draw. Nobody misses the ritual of unscrewing a gunked-up coil with sticky fingers. This just removes it.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eHonestly, the Airflow Ring Is What Sells It\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eFixed-draw disposable tanks are everywhere. They all feel the same: tight, slightly scratchy, take it or leave it. The Go-S has a \u003c\/span\u003e\u003cspan\u003emulti-hole airflow ring\u003c\/span\u003e\u003cspan\u003e on the base, and rotating it makes an actual difference. Closed down, you get that really restricted cigarette-pull that heavy MTL vapers want. Crack it open one or two notches, and the draw softens up, lets a bit more vapour through. Obviously it is not going to compete with a full sub-ohm adjustable setup, but for something you bin after a fortnight? Impressive.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eWhat Does Wood-Pulp Wicking Actually Do?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eInnokin mixes \u003c\/span\u003e\u003cspan\u003ewood-pulp\u003c\/span\u003e\u003cspan\u003e into the organic cotton inside the Go-S coil. Sounds odd. Works well. Wood-pulp fibres absorb liquid faster than cotton alone, so when you chain vape through a stressful afternoon, and the tank level drops below a quarter, the wick keeps up. Pure cotton struggles in that situation. You get a papery dry hit and wonder if the coil has died. The wood-pulp blend buys you more time before that happens. Not infinite time. But enough.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003e510 Means It Fits More Than Just the Go-S Pen\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eInnokin designed this tank for their own Go-S Pen Kit. Makes sense. But the \u003c\/span\u003e\u003cspan\u003e510 threaded connection\u003c\/span\u003e\u003cspan\u003e underneath is the same universal fitting that most regulated mods, pen batteries, and tube devices have used for years. So if you already own a 510 mod and just want a cheap, maintenance-free MTL tank to throw on top, the Go-S does the job. Keep it under \u003c\/span\u003e\u003cspan\u003e14W\u003c\/span\u003e\u003cspan\u003e though. Push it higher, and you will taste burnt cotton within minutes, and the tank is done.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eThe Fill System That Actually Prevents Mess\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eSlide the top cap in the direction of the arrow. That is it. Port opens, you angle your bottle nozzle in, fill to just below the line, push the cap back. Silicone seal clicks into place. No unscrewing the tank from the battery. No inverting the device. Thin-nozzle bottles work best because the fill port is not massive, but most 10ml and 30ml bottles fit without any trouble.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eInnokin Go-S Disposable Tank Colours\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThree options. All the same food-grade \u003c\/span\u003e\u003cspan\u003ePCTG plastic\u003c\/span\u003e\u003cspan\u003e body with a slight translucency, so you can eyeball your liquid level without pulling anything apart.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e#buttons\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli data-section-id=\"t3dqof\" data-start=\"61\" data-end=\"70\"\u003eBlack\u003cspan aria-hidden=\"true\" class=\"PDq2pG_selectionAnchor\"\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli data-section-id=\"1vm4tva\" data-start=\"71\" data-end=\"79\"\u003eBlue\u003c\/li\u003e\n\u003cli data-section-id=\"1j49pec\" data-start=\"80\" data-end=\"86\" data-is-last-node=\"\"\u003ePink\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eHow to Set Up the Innokin Go-S Disposable Tank\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eQuick job. A minute or two at most.\u003c\/span\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eGot an old tank on the battery? Unscrew it anticlockwise and set it aside.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eUnbox the new Go-S. Slide the top cap open by pushing the mouthpiece in the direction of the printed arrow. \u003c\/span\u003e\u003cspan\u003eDo not fire the device yet.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eFill with your chosen\u003c\/span\u003e\u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/50-50-e-liquids\" target=\"_blank\" title=\" 50\/50 E-Liquid \" rel=\"noopener\"\u003e\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e50\/50 E-Liquid\u003c\/strong\u003e\u003c\/a\u003e\u003cspan\u003e\u003cstrong\u003e \u003c\/strong\u003eor nic salt. Thin-nozzle bottle, angled in gently, stop just below the max line.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003ePush the top cap back until the silicone seal snaps shut.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eStand the tank upright and wait a solid seven minutes.\u003c\/span\u003e\u003cspan\u003e Seriously, set a timer. The wood-pulp and cotton blend inside the coil needs to soak through properly from the tank walls inward. Fire it dry and the cotton chars. Once that happens, every draw tastes burnt for the rest of the tank's life. No fixing it.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eScrew the tank onto your battery. First few draws, go gentle. Flavour starts slightly muted and sharpens up within five or six puffs once the wick is fully saturated.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eWhat's in the Innokin Go-S Disposable Tank Box\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eOne tank. Your colour. Coil pre-installed and sealed inside.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eNo e-liquid. No battery. No spare anything. If you need a compatible device, the \u003cstrong\u003eInnokin Go-S Pen Kit\u003c\/strong\u003e is the natural pairing. Any \u003c\/span\u003e\u003cspan\u003e510-threaded\u003c\/span\u003e\u003cspan\u003e battery or mod at \u003c\/span\u003e\u003cspan\u003e10 to 14W\u003c\/span\u003e\u003cspan\u003e works too.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eThe Go-S Fits Anything With a 510 Thread\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eStandard \u003c\/span\u003e\u003cspan\u003e510 connection\u003c\/span\u003e\u003cspan\u003e. That covers most regulated box mods, pen batteries, tube mods, and plenty of older devices sitting in drawers across the country. It threads directly into\u003c\/span\u003e\u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/vape-tanks\"\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/a\u003e\u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/vape-tanks\" target=\"_blank\" title=\"Vape Tanks\" rel=\"noopener\"\u003e\u003cstrong\u003eVape Tanks\u003c\/strong\u003e\u003c\/a\u003e\u003cspan\u003e slots on any of those without adaptors, spacers, or workarounds.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eDoes not fit pod kits. Not the magnetic ones, not the snap-in ones, not the press-fit ones. If your device uses proprietary pods, the Go-S is the wrong product.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eWattage matters too. The\u003cstrong\u003e \u003c\/strong\u003e\u003c\/span\u003e\u003cstrong\u003e1.6ohm coil\u003c\/strong\u003e\u003cspan\u003e was built for \u003c\/span\u003e\u003cspan\u003e13W\u003c\/span\u003e\u003cspan\u003e. Some devices let you run it between \u003c\/span\u003e\u003cspan\u003e10 and 14W\u003c\/span\u003e\u003cspan\u003e safely. Higher than that and the organic cotton burns out fast. You will know immediately because the flavour goes acrid.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eAbout Innokin\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eInnokin has been around since the early days of UK vaping. Longer than most brands people actually recognise. The Go-S line is their answer to a specific problem: vapers who like the form factor of a tank but cannot be bothered with coil maintenance. Practically speaking, the \u003cstrong\u003eGo-S \u003c\/strong\u003esits halfway between a classic tank and a modern pod. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eYou get the \u003c\/span\u003e\u003cspan\u003e510 threading\u003c\/span\u003e\u003cspan\u003e and the adjustable airflow of a proper tank, but when the coil degrades, you replace the whole unit like you would a pod. Their\u003cstrong\u003e Go-Z \u003c\/strong\u003eand\u003cstrong\u003e Go-Z+ models\u003c\/strong\u003e use swappable\u003c\/span\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/vape-coils\"\u003e \u003c\/a\u003e\u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/vape-coils\" target=\"_blank\" title=\"Replacement Coils\" rel=\"noopener\"\u003eReplacement Coils\u003c\/a\u003e\u003c\/strong\u003e\u003cspan\u003e if you prefer keeping the same tank body and just changing the coil head, but the Go-S strips even that step away.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eStock Up and Save\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eHere is the maths on these. One \u003cstrong\u003eGo-S tank\u003c\/strong\u003e lasts somewhere between ten days and three weeks depending on how heavily you vape and how much sweetener is in your liquid. Sucralose kills coils faster than anything else, honestly. Grab two or three tanks at once, and you have got a month or more covered without thinking about it. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003ePirate Vapes\u003c\/strong\u003e\u003cspan\u003e\u003cstrong\u003e \u003c\/strong\u003edispatches same day before 4 pm, everything padded. TPD compliant stock, age-verified checkout, over-18s only. Spend over £25 and delivery is free with Free Pirate Post.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eConclusion\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe Go-S is not trying to be clever. A\u003cstrong\u003e \u003c\/strong\u003e\u003c\/span\u003e\u003cstrong\u003e1.6ohm Kanthal coil\u003c\/strong\u003e\u003cspan\u003e\u003cstrong\u003e \u003c\/strong\u003einside a \u003c\/span\u003e\u003cstrong\u003e2ml PCTG tank\u003c\/strong\u003e\u003cspan\u003e with adjustable airflow and a slide-fill top cap. When the coil is finished, you replace the tank. No maintenance, no spare parts, no fuss. The \u003c\/span\u003e\u003cspan\u003e510 thread\u003c\/span\u003e\u003cspan\u003e fits nearly everything, and the price per tank is roughly what you would spend on a replacement coil anyway. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eIf you want simple MTL vaping without any of the upkeep, this is it. Browse the full Innokin collection and\u003c\/span\u003e\u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/vape-accessories\"\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/a\u003e\u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/vape-accessories\" target=\"_blank\" title=\"Vape Accessories\" rel=\"noopener\"\u003e\u003cstrong\u003eVape Accessories\u003c\/strong\u003e\u003c\/a\u003e\u003cspan\u003e at\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003ePirate Vapes\u003c\/strong\u003e\u003cspan\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eFAQs\u003c\/span\u003e\u003c\/h2\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eWhat devices does the Go-S fit?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eAnything with a \u003c\/span\u003e\u003cspan\u003e510 thread\u003c\/span\u003e\u003cspan\u003e running between \u003c\/span\u003e\u003cspan\u003e10 and 14W\u003c\/span\u003e\u003cspan\u003e. Built for the Innokin Go-S Pen, but it screws onto most box mods and pen batteries from other brands too. Not for pod systems.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eHow long does a Go-S tank last?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eDepends on use. Ten days to three weeks is typical. Sweeter liquids wear the coil faster because sugar residue cakes onto the cotton.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eCan I use nic salts?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eAbsolutely. The \u003c\/span\u003e\u003cspan\u003e1.6ohm coil\u003c\/span\u003e\u003cspan\u003e and tight MTL draw were basically made for nic salts. Go with \u003c\/span\u003e\u003cspan\u003e50\/50 VG\/PG\u003c\/span\u003e\u003cspan\u003e at \u003c\/span\u003e\u003cspan\u003e10mg or 20mg\u003c\/span\u003e\u003cspan\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eWhat is the difference between Go-S and Go-Z?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eBig one. The Go-S coil is permanent. Coil dies, whole tank gets replaced. The Go-Z uses swappable Z coils, so you keep the tank and only change the coil inside. Go-S is simpler. Go-Z saves money long-term if you vape heavily.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eDoes adjusting the airflow actually do anything?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eYes, and it is not even close to a gimmick. Fully closed is a very tight cigarette-style draw. Open it up, and the pull gets noticeably looser. Real difference between the two extremes.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eWill thick e-liquid work in this?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eNo. High-VG juice will not wick properly through the cotton and wood-pulp blend at \u003c\/span\u003e\u003cspan\u003e1.6ohm\u003c\/span\u003e\u003cspan\u003e. The ports are too narrow. Stick with \u003c\/span\u003e\u003cspan\u003e50\/50 or higher-PG\u003c\/span\u003e\u003cspan\u003e blends or you will get dry hits within a few draws.\u003c\/span\u003e\u003c\/p\u003e","brand":"Innokin","offers":[{"title":"Black","offer_id":52537269354778,"sku":null,"price":3.95,"currency_code":"GBP","in_stock":true},{"title":"Blue","offer_id":52537269387546,"sku":null,"price":3.95,"currency_code":"GBP","in_stock":true},{"title":"Pink","offer_id":52537269420314,"sku":null,"price":3.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0995\/5675\/3690\/files\/Innokin_Go-S_Disposable_Tank.jpg?v=1784287773"},{"product_id":"aspire-nautilus-3-tank","title":"Aspire Nautilus 3 Replacement Tank","description":"\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eAspire Nautilus 3 Replacement Tank\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eTwenty-four millimetres wide and built from \u003c\/span\u003e\u003cspan\u003estainless steel\u003c\/span\u003e\u003cspan\u003e with\u003cstrong\u003e \u003c\/strong\u003e\u003c\/span\u003e\u003cstrong\u003ePyrex glass\u003c\/strong\u003e\u003cspan\u003e. The \u003c\/span\u003e\u003cstrong\u003eAspire Nautilus 3\u003c\/strong\u003e\u003cspan\u003e\u003cstrong\u003e \u003c\/strong\u003eis a dedicated \u003c\/span\u003e\u003cstrong\u003eMTL tank\u003c\/strong\u003e\u003cspan\u003e\u003cstrong\u003e \u003c\/strong\u003ewith a sliding top-fill system, an \u003c\/span\u003e\u003cspan\u003ee-liquid shut-off valve\u003c\/span\u003e\u003cspan\u003e that stops juice from leaking during coil changes, and compatibility with every coil in the entire \u003c\/span\u003e\u003cspan\u003eNautilus series\u003c\/span\u003e\u003cspan\u003e. Two coils ship in the box: a \u003c\/span\u003e\u003cstrong\u003e1.8ohm BVC\u003c\/strong\u003e\u003cspan\u003e for tight, cigarette-style draws and a \u003c\/span\u003e\u003cspan\u003e0.7ohm mesh\u003c\/span\u003e\u003cspan\u003e for warmer restricted direct-lung pulls. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eSeven airflow inlets, a \u003c\/span\u003e\u003cstrong\u003eCRC-locking mouthpiece\u003c\/strong\u003e\u003cspan\u003e for child resistance, and \u003c\/span\u003e\u003cspan\u003epress-fit coil installation\u003c\/span\u003e\u003cspan\u003e that takes seconds. \u003c\/span\u003e\u003cspan\u003e2ml capacity\u003c\/span\u003e\u003cspan\u003e under UK TPD rules. Three finishes. One of the most respected\u003c\/span\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/vape-tanks\"\u003e \u003c\/a\u003e\u003ca title=\"Vape Tanks\" href=\"https:\/\/piratevapes.co.uk\/collections\/vape-tanks\" target=\"_blank\"\u003eVape Tanks\u003c\/a\u003e\u003c\/strong\u003e\u003cspan\u003e\u003cstrong\u003e \u003c\/strong\u003ein the MTL category, and it has been for a reason. Over 18s only.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eWhy vapers choose the Nautilus 3:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eSeven individually selectable airflow inlets\u003c\/span\u003e\u003cspan\u003e ranging from 0.8mm to 3.0mm let you dial in exactly the draw resistance you want, from a tight cigarette-like pull to a slightly looser restricted lung hit, without swapping any hardware\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eE-liquid shut-off valve\u003c\/span\u003e\u003cspan\u003e seals the tank base when you remove a coil, which means you can change coils without draining your tank or losing a single drop of juice\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eFull Nautilus coil compatibility\u003c\/span\u003e\u003cspan\u003e across every resistance Aspire has produced for the series, from the original \u003c\/span\u003e\u003cspan\u003e1.8ohm BVC\u003c\/span\u003e\u003cspan\u003e through to the \u003c\/span\u003e\u003cspan\u003e0.3ohm mesh\u003c\/span\u003e\u003cspan\u003e, giving you eight or more coil options from one tank\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003ePress-fit installation\u003c\/span\u003e\u003cspan\u003e instead of threaded screw-in, so coil swaps are quick and tool-free\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eCRC locking mouthpiece\u003c\/span\u003e\u003cspan\u003e adds genuine child resistance to the fill system, which matters in a household with young children\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eAspire Nautilus 3 Replacement Tank Features\u003c\/span\u003e\u003c\/h2\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eThe Shut-Off Valve Changes How You Swap Coils\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eMost tanks force you into a routine: drain the liquid, remove the old coil, install the new one, refill, wait. The Nautilus 3 skips half of that. The integrated \u003c\/span\u003e\u003cspan\u003ee-liquid shut-off valve\u003c\/span\u003e\u003cspan\u003e closes the channel between the tank body and the coil chamber when the coil is removed. Your liquid stays put. Pull the old coil, press the new one in, and vape. That is a small engineering decision that saves real time, especially when you change coils weekly.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eWhy Seven Airflow Options Matter More Than You Think\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eOne or two airflow settings are standard on most tanks. The Nautilus 3 offers \u003c\/span\u003e\u003cspan\u003eseven distinct inlets\u003c\/span\u003e\u003cspan\u003e on the airflow control ring, each a different diameter between \u003c\/span\u003e\u003cspan\u003e0.8mm and 3.0mm\u003c\/span\u003e\u003cspan\u003e. In practice, this means you are not choosing between \"open\" and \"closed.\" You are stepping through a range. Pair the tightest setting with the \u003c\/span\u003e\u003cspan\u003e1.8ohm BVC coil,\u003c\/span\u003e\u003cspan\u003e and it feels close to a cigarette draw. Open it up a few notches with the \u003c\/span\u003e\u003cspan\u003e0.7ohm mesh,\u003c\/span\u003e\u003cspan\u003e and you get a warmer, slightly cloudier restricted lung pull. One tank, a wide spread of draw styles.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eSliding Top-Fill With a Purpose\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003ePull the drip tip off, slide back the top cap, fill through the single port. The \u003c\/span\u003e\u003cspan\u003eCRC locking mechanism\u003c\/span\u003e\u003cspan\u003e means the cap does not slide open accidentally in a pocket or bag, and it keeps the fill port inaccessible to children. Practical, not gimmicky. The fill port is wide enough for most bottle nozzles without squeezing or overfilling. It works at speed when you are refilling quickly between tasks.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eStainless Steel That Earns Its Keep\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eAt \u003c\/span\u003e\u003cspan\u003e72.55g\u003c\/span\u003e\u003cspan\u003e, the Nautilus 3 has genuine weight to it. The full \u003c\/span\u003e\u003cspan\u003estainless steel body\u003c\/span\u003e\u003cspan\u003e with \u003c\/span\u003e\u003cspan\u003ePyrex glass\u003c\/span\u003e\u003cspan\u003e handles the kind of everyday wear that lighter plastic tanks do not survive. Drops onto a desk, a knock against the edge of a table, the inside of a bag with keys and coins. Fair enough, it is not indestructible. But it is built to last far longer than budget alternatives. A spare glass section ships in the box, and\u003c\/span\u003e\u003cstrong\u003e replacement Nautilus 3 glass\u003c\/strong\u003e\u003cspan\u003e is available separately.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003ePress-Fit Coils, No Thread to Strip\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThreaded coil installation works fine until you cross-thread it once and the seal goes. The Nautilus 3 uses a \u003c\/span\u003e\u003cspan\u003epress-fit system\u003c\/span\u003e\u003cspan\u003e. Push the coil in until it clicks. Pull it out when it is spent. No rotation, no alignment, no risk of damaging the threads over repeated swaps. Combined with the shut-off valve, a coil change on this tank genuinely takes under a minute.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eAspire Nautilus 3 Replacement Tank Colours\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThree finishes. All use the same stainless steel and Pyrex glass construction, so the choice is purely visual.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e#buttons\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli data-end=\"76\" data-start=\"67\" data-section-id=\"t3dqof\"\u003eBlack\u003cspan class=\"PDq2pG_selectionAnchor\" aria-hidden=\"true\"\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"87\" data-start=\"77\" data-section-id=\"1l1v5i7\"\u003eSilver\u003c\/li\u003e\n\u003cli data-is-last-node=\"\" data-end=\"98\" data-start=\"88\" data-section-id=\"1860rfp\"\u003eGunmetal\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eHow to Set Up the Aspire Nautilus 3 Replacement Tank\u003c\/span\u003e\u003c\/h2\u003e\n\u003col\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eRemove the pre-installed 0.7ohm mesh coil\u003c\/span\u003e\u003cspan\u003e from the base of the tank if you prefer to start with the \u003c\/span\u003e\u003cspan\u003e1.8ohm BVC\u003c\/span\u003e\u003cspan\u003e instead. If the mesh coil suits your vaping style, leave it in place and skip to step three.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003ePress your chosen coil\u003c\/span\u003e\u003cspan\u003e firmly into the base until you feel it seat. The press-fit mechanism should click or hold snugly without any wobble.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eApply three to four drops of e-liquid\u003c\/span\u003e\u003cspan\u003e directly onto the exposed cotton visible through the coil's wicking ports. Tilt the coil slightly and add another drop down the centre bore.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eReassemble the tank body\u003c\/span\u003e\u003cspan\u003e onto the base, then slide back the top cap and fill through the port with your chosen e-liquid. Stay just below the max line to leave airspace.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eStand the filled tank upright for six to seven minutes.\u003c\/span\u003e\u003cspan\u003e The cotton inside Nautilus coils is densely packed and needs this time to saturate fully from the base upward. Rushing this step chars the wick permanently.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eStart at the lowest recommended wattage\u003c\/span\u003e\u003cspan\u003e for your coil: \u003c\/span\u003e\u003cspan\u003e10W for the 1.8ohm BVC\u003c\/span\u003e\u003cspan\u003e or \u003c\/span\u003e\u003cspan\u003e20W for the 0.7ohm mesh\u003c\/span\u003e\u003cspan\u003e. Take a few short draws before increasing gradually.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eWhat's in the Aspire Nautilus 3 Replacement Tank Box\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eOne \u003c\/span\u003e\u003cspan\u003eNautilus 3 tank\u003c\/span\u003e\u003cspan\u003e with the \u003c\/span\u003e\u003cspan\u003e0.7ohm Nautilus 2S mesh coil\u003c\/span\u003e\u003cspan\u003e pre-installed. \u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eOne \u003c\/span\u003e\u003cspan\u003e1.8ohm Nautilus BVC coil\u003c\/span\u003e\u003cspan\u003e in the box,\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003ea spare \u003c\/span\u003e\u003cspan\u003ePyrex glass tube\u003c\/span\u003e\u003cspan\u003e, \u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003ea spare \u003c\/span\u003e\u003cspan\u003e510 drip tip\u003c\/span\u003e\u003cspan\u003e, \u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003ea user manual, \u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eand an \u003c\/span\u003e\u003cspan\u003eO-ring pack\u003c\/span\u003e\u003cspan\u003e for maintenance. \u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eNo e-liquid, no mod, no batteries. You will need a \u003c\/span\u003e\u003cspan\u003e510-threaded mod\u003c\/span\u003e\u003cspan\u003e or battery to use this tank.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eThe MTL Tank That Accepts Eight Coil Families\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe Nautilus 3 is backwards-compatible with every coil Aspire has manufactured for the Nautilus platform. That is a significant range:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe \u003c\/span\u003e\u003cspan\u003e1.8ohm BVC\u003c\/span\u003e\u003cspan\u003e (10-14W) and the \u003c\/span\u003e\u003cspan\u003e1.6ohm BVC\u003c\/span\u003e\u003cspan\u003e (7-12W) are classic tight-draw MTL coils for higher-PG liquids and\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003enic salts\u003c\/span\u003e\u003cspan\u003e. The \u003c\/span\u003e\u003cspan\u003e0.7ohm BVC\u003c\/span\u003e\u003cspan\u003e (18-23W) opens the draw up slightly. The \u003c\/span\u003e\u003cspan\u003eNS 1.8ohm\u003c\/span\u003e\u003cspan\u003e (10-12W) is specifically optimised for salt nicotine. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003e\u003cstrong\u003eThen there is the sub-ohm range: \u003c\/strong\u003ethe \u003c\/span\u003e\u003cspan\u003e0.7ohm 2S Mesh\u003c\/span\u003e\u003cspan\u003e (20-25W, included), the \u003c\/span\u003e\u003cspan\u003e0.4ohm 2S\u003c\/span\u003e\u003cspan\u003e (23-28W), the \u003c\/span\u003e\u003cspan\u003e0.3ohm mesh\u003c\/span\u003e\u003cspan\u003e (23-28W), and the \u003c\/span\u003e\u003cspan\u003e1.0ohm mesh\u003c\/span\u003e\u003cspan\u003e (13-15W).\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003e\u003cstrong\u003eWhat does not fit:\u003c\/strong\u003e any coil from the Aspire Cleito family, the PockeX range, the Atlantis series, or any Aspire pod system. The Nautilus platform is its own coil ecosystem. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eIf the coil says \"Nautilus\" on the packaging, it works. If it does not, it will not. Browse the full\u003c\/span\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/vape-coils\"\u003e \u003c\/a\u003e\u003ca title=\"Vape Coils\" href=\"https:\/\/piratevapes.co.uk\/collections\/vape-coils\" target=\"_blank\"\u003eVape Coils\u003c\/a\u003e\u003c\/strong\u003e\u003cspan\u003e collection for compatible options.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eAbout Aspire\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe Nautilus name defined mouth-to-lung vaping for a generation of vapers. The original Nautilus tank arrived in 2014, and it became the benchmark that every subsequent\u003cstrong\u003e \u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/mtl-tanks\" target=\"_blank\" title=\"MTL Tank\" rel=\"noopener\"\u003eMTL Tank\u003c\/a\u003e \u003c\/strong\u003ewas measured against. Aspire built on that with the \u003cstrong\u003eNautilus 2, the Nautilus GT\u003c\/strong\u003e, and now the\u003cstrong\u003e Nautilus 3.\u003c\/strong\u003e Each revision refined the airflow, the coil platform, and the fill system. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe Nautilus 3 specifically inherits its flavour profile from the Nautilus GT while adding the shut-off valve and CRC child-resistant feature that earlier models lacked. For MTL vapers who have used any Nautilus tank before, this is the version that fixes the small frustrations the older models had. Browse the full\u003c\/span\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/aspire-vapes\"\u003e \u003c\/a\u003e\u003ca title=\"Aspire Collection\" href=\"https:\/\/piratevapes.co.uk\/collections\/aspire-vapes\" target=\"_blank\"\u003eAspire Collection\u003c\/a\u003e\u003c\/strong\u003e\u003cspan\u003e for kits, tanks, pods, and coils.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eStock Up and Save\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eA tank is only as good as the coils and liquid running through it. The Nautilus 3 ships with two coils, but the \u003c\/span\u003e\u003cspan\u003e1.8ohm BVC\u003c\/span\u003e\u003cspan\u003e will last roughly a week with daily use, and the \u003c\/span\u003e\u003cspan\u003e0.7ohm mesh\u003c\/span\u003e\u003cspan\u003e perhaps ten days depending on how sweet your liquid runs. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003ePicking up a five-pack of \u003cstrong\u003eNautilus BVC coils\u003c\/strong\u003e alongside a few bottles of e-liquid in the same order gets you through the first month without thinking about it. Every order from \u003c\/span\u003e\u003cspan\u003ePirate Vapes\u003c\/span\u003e\u003cspan\u003e ships the same day before 4 pm in protective packaging. TPD-compliant stock, age-verified checkout, over 18s only. Free Pirate Post on orders over £25.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eConclusion\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe \u003cstrong\u003eNautilus 3\u003c\/strong\u003e is the tank you buy when you already know you want MTL and you want it done properly. The shut-off valve, the seven-position airflow ring, and the full backwards compatibility with\u003cstrong\u003e Aspire's Nautilus coil range \u003c\/strong\u003emake it one of the most versatile MTL tanks available in the UK right now.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThree finishes, solid stainless steel construction, and a spare glass in the box. If your current tank leaks during coil changes, does not give you enough airflow control, or locks you into a single coil option, this is the upgrade. Browse more\u003c\/span\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/vape-accessories\"\u003e \u003c\/a\u003e\u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/vape-accessories\" target=\"_blank\" title=\"Vape Accessories\" rel=\"noopener\"\u003eVape Accessories\u003c\/a\u003e\u003c\/strong\u003e\u003cspan\u003e\u003cstrong\u003e \u003c\/strong\u003eand pick one up at\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003ePirate Vapes\u003c\/strong\u003e\u003cspan\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eFAQs\u003c\/span\u003e\u003c\/h2\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eWhat coils fit the Nautilus 3?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eEvery coil in Aspire's Nautilus series. That includes the \u003c\/span\u003e\u003cspan\u003e1.8ohm BVC\u003c\/span\u003e\u003cspan\u003e, \u003c\/span\u003e\u003cspan\u003e1.6ohm BVC\u003c\/span\u003e\u003cspan\u003e, \u003c\/span\u003e\u003cspan\u003e0.7ohm BVC\u003c\/span\u003e\u003cspan\u003e, \u003c\/span\u003e\u003cspan\u003eNS 1.8ohm\u003c\/span\u003e\u003cspan\u003e, \u003c\/span\u003e\u003cspan\u003e0.4ohm 2S\u003c\/span\u003e\u003cspan\u003e, \u003c\/span\u003e\u003cspan\u003e0.7ohm 2S Mesh\u003c\/span\u003e\u003cspan\u003e, \u003c\/span\u003e\u003cspan\u003e0.3ohm mesh\u003c\/span\u003e\u003cspan\u003e, and the \u003c\/span\u003e\u003cspan\u003e1.0ohm mesh\u003c\/span\u003e\u003cspan\u003e. Eight options from one tank.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eDoes the Nautilus 3 leak?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eRarely. The shut-off valve seals the coil chamber during changes, and the sliding top-fill locks shut via a CRC mechanism. Leaking is almost always caused by a poorly seated coil or overfilling past the max line.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eWhat e-liquid ratio works best?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eDepends on the coil. The \u003c\/span\u003e\u003cspan\u003e1.8ohm BVC\u003c\/span\u003e\u003cspan\u003e works best with 50\/50 VG\/PG or higher-PG blends. The \u003c\/span\u003e\u003cspan\u003e0.7ohm mesh\u003c\/span\u003e\u003cspan\u003e handles 50\/50 and slightly higher-VG liquids comfortably. Avoid thick 70\/30 or max-VG in any of the higher-resistance MTL coils.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eIs the Nautilus 3 good for nic salts?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eVery. The tight MTL draw and low wattage on the BVC coils make it one of the better tanks for nic salts at \u003c\/span\u003e\u003cspan\u003e10mg or 20mg\u003c\/span\u003e\u003cspan\u003e. Aspire even makes a dedicated \u003c\/span\u003e\u003cspan\u003eNS 1.8ohm coil\u003c\/span\u003e\u003cspan\u003e optimised specifically for salt nicotine.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eHow often do Nautilus 3 coils need replacing?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eRoughly every one to two weeks with daily MTL use. Sweeter liquids gunk the cotton faster. The \u003c\/span\u003e\u003cspan\u003e0.7ohm mesh\u003c\/span\u003e\u003cspan\u003e tends to last slightly longer than the traditional BVC wire coils because mesh distributes heat more evenly across the wick.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eWhat mod does the Nautilus 3 need?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eAny \u003c\/span\u003e\u003cspan\u003e510-threaded mod or battery\u003c\/span\u003e\u003cspan\u003e capable of firing between \u003c\/span\u003e\u003cspan\u003e7W and 28W\u003c\/span\u003e\u003cspan\u003e. The Aspire Zelos 3 is the natural pairing, but any regulated mod with a 510 connector will work. The tank sits flush on most 24mm-wide mods.\u003c\/span\u003e\u003c\/p\u003e","brand":"Aspire","offers":[{"title":"Black","offer_id":52537278234906,"sku":null,"price":17.99,"currency_code":"GBP","in_stock":true},{"title":"Silver","offer_id":52537278267674,"sku":null,"price":17.99,"currency_code":"GBP","in_stock":true},{"title":"Gunmetal","offer_id":52537278300442,"sku":null,"price":17.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0995\/5675\/3690\/files\/Aspire_Nautilus_3_Replacement_Tank.jpg?v=1784288913"},{"product_id":"aspire-k3-tank","title":"Aspire K3 Tank","description":"\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eAspire K3 Tank Replacement\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eEighteen millimetres wide and 55mm tall. The \u003cstrong\u003eAspire K3\u003c\/strong\u003e is a compact \u003c\/span\u003e\u003cstrong\u003eMTL glassomizer\u003c\/strong\u003e\u003cspan\u003e built around \u003c\/span\u003e\u003cstrong\u003ePyrex glass\u003c\/strong\u003e\u003cspan\u003e, stainless steel construction, and \u003cstrong\u003eAspire's \u003c\/strong\u003eproven \u003c\/span\u003e\u003cstrong\u003eNautilus BVC coil\u003c\/strong\u003e\u003cspan\u003e\u003cstrong\u003e platform\u003c\/strong\u003e. It holds \u003c\/span\u003e\u003cstrong\u003e2ml of e-liquid\u003c\/strong\u003e\u003cspan\u003e\u003cstrong\u003e (TPD compliant)\u003c\/strong\u003e, fills from the bottom via a twist-off base cap, and connects to any \u003c\/span\u003e\u003cspan\u003e510-threaded\u003c\/span\u003e\u003cspan\u003e battery or mod. Fixed airflow through four precision-cut slots at the base keeps the draw tight and cigarette-like. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eA \u003c\/span\u003e\u003cstrong\u003e1.8ohm Nautilus BVC coil\u003c\/strong\u003e\u003cspan\u003e\u003cstrong\u003e \u003c\/strong\u003ecomes pre-installed, and the tank also accepts the \u003c\/span\u003e\u003cstrong\u003e1.6ohm\u003c\/strong\u003e\u003cspan\u003e\u003cstrong\u003e Nautilus BVC\u003c\/strong\u003e head. Two finishes in the store picker: Black and Silver. Removable \u003c\/span\u003e\u003cspan\u003e510 drip tip\u003c\/span\u003e\u003cspan\u003e included. If you need a straightforward\u003c\/span\u003e\u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/mtl-tanks\" target=\"_blank\" title=\"MTL Tank\" rel=\"noopener\"\u003e\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eMTL Tank\u003c\/strong\u003e\u003c\/a\u003e\u003cspan\u003e\u003cstrong\u003e \u003c\/strong\u003ethat runs on one of the most widely available coil families in UK vaping, the K3 does exactly that.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eWhy vapers choose the K3 Tank:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eNautilus BVC coil compatibility\u003c\/span\u003e\u003cspan\u003e means you are buying into one of the most established and widely stocked coil families in UK vaping, with replacements available almost everywhere\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003ePyrex glass and stainless steel\u003c\/span\u003e\u003cspan\u003e give the K3 a durability and chemical resistance that plastic clearomiser tanks simply cannot match, and it looks considerably better on a mod\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eBottom-fill design\u003c\/span\u003e\u003cspan\u003e lets you twist off the base, fill, and reassemble without removing the tank from your device, which saves time during a busy day\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eFixed four-slot airflow\u003c\/span\u003e\u003cspan\u003e keeps the draw consistently tight and MTL-focused without any adjustment dials to knock out of position accidentally\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003e510 drip tip\u003c\/span\u003e\u003cspan\u003e is removable and replaceable with any standard 510 mouthpiece if you want a different material, bore, or shape\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eAspire K3 Tank Replacement Features\u003c\/span\u003e\u003c\/h2\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003ePyrex Glass That Handles Everything You Pour In\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe tank section is genuine Pyrex, not the polycarbonate plastic used in cheaper clearomisers. That distinction matters. Acidic e-liquids, strong menthol blends, and citrus flavours can crack and cloud plastic tanks within days. Pyrex sits there unbothered. The glass also makes it easy to check your liquid level at a glance, so you are never guessing whether the tank needs a top-up.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eFour Slots, Zero Fiddling\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eAspire set the airflow with four fixed slots cut into the base of the K3. No rotating rings, no dials, no tiny screws. The draw lands in a specific place: tight, restrictive, and cigarette-like. For MTL vapers who know what they want and do not need adjustability, this is a benefit rather than a limitation. One less thing to go wrong in your pocket.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eThe Nautilus Coil Family, Still Going\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe K3 runs on\u003cstrong\u003e Aspire's \u003c\/strong\u003e\u003c\/span\u003e\u003cstrong\u003eNautilus BVC coils\u003c\/strong\u003e\u003cspan\u003e. These have been around for years, and that longevity is the point. You can find replacements in practically every UK vape shop, online or in person. The \u003c\/span\u003e\u003cspan\u003e1.8ohm\u003c\/span\u003e\u003cspan\u003e coil that comes pre-installed runs at \u003c\/span\u003e\u003cspan\u003e3.0 to 5.0V\u003c\/span\u003e\u003cspan\u003e and delivers a clean, cool MTL draw. Swap to the \u003c\/span\u003e\u003cspan\u003e1.6ohm\u003c\/span\u003e\u003cspan\u003e for a slightly warmer pull with a touch more throat feel. Both use organic cotton wicking. Grab fresh\u003c\/span\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/vape-coils\"\u003e \u003c\/a\u003e\u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/vape-coils\" target=\"_blank\" title=\"Replacement Coils\" rel=\"noopener\"\u003eReplacement Coils\u003c\/a\u003e\u003c\/strong\u003e\u003cspan\u003e whenever stock runs low.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eBottom Fill Without the Detach\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eTwist the base off the tank, expose the fill port, pour your liquid in, twist the base back on. The tank stays attached to your device through the whole process. No unscrewing the tank from the battery. No juggling parts over a sink. Sounds minor until you have done it twenty times in a week.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eA 510 Drip Tip You Can Actually Swap\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe included stainless steel drip tip uses a standard \u003c\/span\u003e\u003cspan\u003e510 fitting\u003c\/span\u003e\u003cspan\u003e. If stainless steel feels too cold in winter or too warm in summer, replace it with a Delrin, resin, or ceramic\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003edrip tip\u003c\/span\u003e\u003cspan\u003e without any adaptor. One pull, one push.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eAspire K3 Tank Replacement Colours\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eTwo finishes. Both use the same Pyrex glass body with different stainless steel trim.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003e#buttons\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\"\u003eBlack\u003c\/li\u003e\n\u003cli dir=\"ltr\"\u003eSilver\u003cspan\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eHow to Set Up the Aspire K3 Tank Replacement\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eQuick and clean. Under three minutes even the first time.\u003c\/span\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eUnscrew the base\u003c\/span\u003e\u003cspan\u003e of the K3 tank by twisting it anticlockwise. The base, coil, and tank body separate as one unit from the top cap.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eIf there is an old coil installed, unscrew it from the base. Take a fresh \u003c\/span\u003e\u003cspan\u003eNautilus BVC coil\u003c\/span\u003e\u003cspan\u003e and apply \u003c\/span\u003e\u003cspan\u003ethree to four drops of e-liquid\u003c\/span\u003e\u003cspan\u003e directly onto the cotton visible through the side wicking ports.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eThread the new coil\u003c\/span\u003e\u003cspan\u003e into the base clockwise until it sits snug. Finger-tight only. Overtightening strips the threading.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eReassemble the tank body onto the base. Fill with your chosen \u003c\/span\u003e\u003cspan\u003e50\/50 or higher-PG e-liquid\u003c\/span\u003e\u003cspan\u003e through the gap around the central chimney, keeping liquid away from the airflow channel. Do not overfill past the glass line.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eLeave the filled tank standing upright for \u003c\/span\u003e\u003cspan\u003esix to seven minutes\u003c\/span\u003e\u003cspan\u003e. The organic cotton inside the BVC coil needs that time to absorb liquid fully from the base upward through the narrow wicking channels.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eAttach the tank to your \u003c\/span\u003e\u003cspan\u003e510 battery or mod\u003c\/span\u003e\u003cspan\u003e and begin with gentle draws at low voltage. Increase gradually until you find your preferred warmth.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eWhat's in the Aspire K3 Tank Replacement Box\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eOne Aspire K3 glassomiser tank with a \u003c\/span\u003e\u003cspan\u003e1.8ohm Nautilus BVC coil\u003c\/span\u003e\u003cspan\u003e pre-installed. \u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eOne stainless steel \u003c\/span\u003e\u003cspan\u003e510 drip tip\u003c\/span\u003e\u003cspan\u003e pre-fitted. \u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eOne filling and coil change instruction card. \u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eNo e-liquid included. No battery or mod included. No spare coil included. You will want to pick up a five-pack of \u003cstrong\u003eNautilus BVC coils \u003c\/strong\u003eand a bottle of\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003enic salt\u003c\/span\u003e\u003cspan\u003e to get started.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eThe MTL Tank Built for Aspire's Pen Batteries and 510 Mods\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe K3 was originally designed as the tank component of Aspire's K3 Quick Start Kit, paired with a pen-style battery. Sold separately here as a replacement or upgrade. It fits any device with a \u003c\/span\u003e\u003cspan\u003e510 connection\u003c\/span\u003e\u003cspan\u003e and works best on batteries or mods that output between \u003c\/span\u003e\u003cspan\u003e3.0V and 5.0V\u003c\/span\u003e\u003cspan\u003e. That covers most pen-style Aspire batteries, basic regulated mods, and eGo-style devices.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eWhat it does not suit: high-wattage box mods running sub-ohm builds. The K3 is a \u003c\/span\u003e\u003cspan\u003e1.8ohm MTL tank\u003c\/span\u003e\u003cspan\u003e with fixed restricted airflow. Pushing 30W or more through this tank is not what it was built for, and the coil will burn out almost immediately.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eAbout Aspire\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe K3 sits in a specific corner of Aspire's range: the compact, affordable, entry-level MTL tank. It shares its coil platform with the Nautilus family, which is one of the longest-running and most widely distributed coil systems in vaping. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eAspire built their early UK reputation on exactly this kind of product: simple, well-constructed mouth-to-lung hardware that works reliably without demanding technical knowledge from the user. The K3 carries that same design philosophy. No frills, no features you will never use. Just a well-made glass tank that does one thing properly.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eStock Up and Save\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe K3 comes with one coil pre-installed and no spare. At daily MTL use, a single Nautilus BVC head lasts roughly a week, sometimes a bit longer with lighter vaping. Picking up a five-pack of replacement coils alongside the tank means you are covered for over a month without reordering. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eConsider grabbing a spare piece of\u003c\/span\u003e\u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/replacement-tank-glass\" target=\"_blank\" title=\"Replacement Glass\" rel=\"noopener\"\u003e\u003cstrong\u003e Replacement Glass\u003c\/strong\u003e\u003c\/a\u003e\u003cspan\u003e too, because Pyrex survives drops better than plastic but it is not invincible. Every order from\u003cstrong\u003e \u003c\/strong\u003e\u003c\/span\u003e\u003cstrong\u003ePirate Vapes\u003c\/strong\u003e\u003cspan\u003e\u003cstrong\u003e \u003c\/strong\u003eships same day before 4 pm. All stock is TPD compliant, with age-verified checkout and over-18s only.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eConclusion\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe Aspire K3 is a small, well-built \u003cstrong\u003eMTL tank \u003c\/strong\u003ethat runs on one of the most established coil families in UK vaping. Pyrex glass, stainless steel body, fixed restricted airflow, bottom fill, and \u003cstrong\u003eNautilus BVC compatibility\u003c\/strong\u003e at a price that makes replacement painless. Two colours, 510 connection, and a coil platform you can source almost anywhere. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eIf your K3 tank needs replacing or you want a second tank in your rotation, this is a straightforward pickup. Browse more from \u003c\/span\u003e\u003cspan\u003eAspire\u003c\/span\u003e\u003cspan\u003e and check out the full\u003c\/span\u003e\u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/vape-accessories\"\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/a\u003e\u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/vape-accessories\" target=\"_blank\" title=\"Vape Accessories\" rel=\"noopener\"\u003e\u003cstrong\u003eVape Accessories\u003c\/strong\u003e\u003c\/a\u003e\u003cspan\u003e range at\u003c\/span\u003e\u003ca href=\"https:\/\/piratevapes.co.uk\"\u003e \u003c\/a\u003e\u003cstrong\u003ePirate Vapes\u003c\/strong\u003e\u003cspan\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eFAQs\u003c\/span\u003e\u003c\/h2\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eWhat coils fit the K3 tank?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eAspire \u003c\/span\u003e\u003cspan\u003eNautilus BVC coils\u003c\/span\u003e\u003cspan\u003e in \u003c\/span\u003e\u003cspan\u003e1.6ohm\u003c\/span\u003e\u003cspan\u003e and \u003c\/span\u003e\u003cspan\u003e1.8ohm\u003c\/span\u003e\u003cspan\u003e. The 1.8ohm comes pre-installed. Both are widely stocked across the UK.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eDoes the K3 work with high-VG e-liquid?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eNot well. The wicking ports and fixed airflow are designed for \u003c\/span\u003e\u003cspan\u003e50\/50 VG\/PG\u003c\/span\u003e\u003cspan\u003e or thinner. High-VG liquids above 60% VG will wick too slowly and produce dry hits.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eCan I use nic salts in the K3?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eYes. The tight MTL draw and low wattage suit nic salts at \u003c\/span\u003e\u003cspan\u003e10mg to 20mg\u003c\/span\u003e\u003cspan\u003e in a 50\/50 ratio. Smooth throat hit, good flavour, minimal liquid consumption.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eIs the K3 tank adjustable airflow?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eNo. Four fixed air slots. The draw is set from the factory: tight, restrictive, MTL. No adjustment ring or dial.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eWhat battery does the K3 tank need?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eAny \u003c\/span\u003e\u003cspan\u003e510-threaded\u003c\/span\u003e\u003cspan\u003e battery or mod outputting between \u003c\/span\u003e\u003cspan\u003e3.0V and 5.0V\u003c\/span\u003e\u003cspan\u003e. Pen-style Aspire batteries, eGo devices, and basic regulated mods all work. Not designed for high-wattage sub-ohm setups.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eHow often should I change the coil?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eRoughly every \u003c\/span\u003e\u003cspan\u003efive to ten days\u003c\/span\u003e\u003cspan\u003e with daily MTL use. Sweeter e-liquids shorten coil life. When flavour drops off, or you taste a burnt note, it is time for a fresh one.\u003c\/span\u003e\u003c\/p\u003e","brand":"Aspire","offers":[{"title":"Black","offer_id":52537299534106,"sku":null,"price":7.49,"currency_code":"GBP","in_stock":true},{"title":"Silver","offer_id":52537299566874,"sku":null,"price":7.49,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0995\/5675\/3690\/files\/Aspire_K3_Tank.jpg?v=1784289500"},{"product_id":"aspire-k2-vape-tank","title":"Aspire K2 Vape Tank","description":"\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eK2 Vape Tank By Aspire\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eFifteen millimetres wide. That is all. The \u003cstrong\u003eAspire K2 \u003c\/strong\u003eis one of the slimmest\u003c\/span\u003e\u003ca title=\"MTL Tanks\" href=\"https:\/\/piratevapes.co.uk\/collections\/mtl-tanks\" target=\"_blank\"\u003e\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eMTL Tanks\u003c\/strong\u003e\u003c\/a\u003e\u003cspan\u003e still in production, and it does exactly one thing: deliver a tight, cigarette-style draw from a \u003c\/span\u003e\u003cspan\u003e1.8ml pyrex glass tank\u003c\/span\u003e\u003cspan\u003e with a pre-installed \u003c\/span\u003e\u003cstrong\u003e1.6ohm BVC Kanthal coil\u003c\/strong\u003e\u003cspan\u003e. Stainless steel body, fixed bottom airflow, bottom-fill design, and a standard \u003c\/span\u003e\u003cspan\u003e510 thread\u003c\/span\u003e\u003cspan\u003e that connects to practically any pen-style battery or low-wattage mod. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eAspire built this as the successor to the K1, doubling the airflow inlets from two to four for a smoother pull. Two colours in stock at \u003cstrong\u003ePirate Vapes\u003c\/strong\u003e: Black and Silver. Over 18s only.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eWhy vapers choose the K2 Tank:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eAt 15mm diameter, it pairs with eGo-style batteries without looking like a science project strapped to a pen.\u003c\/span\u003e\u003cspan\u003e The proportions match slim pen devices in a way that wider tanks never quite manage, and the weight stays low enough to forget it is there.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eFixed airflow means consistency.\u003c\/span\u003e\u003cspan\u003e No accidental setting changes in your pocket, no loose airflow rings. Same draw every time.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003ePyrex glass handles aggressive e-liquids\u003c\/span\u003e\u003cspan\u003e that would stain or crack polycarbonate tanks within a couple of weeks. Menthol, cinnamon, citrus: no clouding.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eBottom fill is slower than side fill, but it seals properly.\u003c\/span\u003e\u003cspan\u003e The K2 does not leak.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eBVC coil compatibility keeps replacement costs low\u003c\/span\u003e\u003cspan\u003e since Aspire's BVC clearomiser coils are widely available and sold in five-packs.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eK2 Vape Tank By Aspire Features\u003c\/span\u003e\u003c\/h2\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eStill Thinner Than Almost Everything Else\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eAt \u003c\/span\u003e\u003cspan\u003e15mm across\u003c\/span\u003e\u003cspan\u003e, the K2 matches the diameter of a ballpoint pen cap. That is not a novelty stat. Pen-style batteries are designed around this width, and when the tank matches the battery, the whole device looks and feels intentional rather than top-heavy. If you carry a vape in your shirt pocket or handbag, the slim profile genuinely matters. Wider tanks on narrow batteries look awkward and feel unstable.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eFour Air Inlets Where the K1 Had Two\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eAspire doubled the bottom airflow inlets from the K1 to the K2. The draw is still tight and firmly MTL, but the extra airflow makes it smoother. Less resistance on the inhale, less effort per draw. Not a massive change on paper, but noticeable after a few tanks. Fair enough improvement for what is essentially the same tank platform.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eThat Pyrex Earns Its Place\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe \u003c\/span\u003e\u003cspan\u003eacid-resistant Pyrex glass\u003c\/span\u003e\u003cspan\u003e section is not a marketing line. Polycarbonate and PMMA tanks react with certain e-liquid compounds, particularly cinnamaldehyde (cinnamon flavours), citral (citrus), and menthol. The reaction clouds the tank, weakens the plastic, and eventually cracks it. Pyrex ignores all of that. If you vape menthol\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003ee-liquids\u003c\/span\u003e\u003cspan\u003e or anything citrus-forward, glass is the only sensible tank material.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eBottom Fill With a Proper Seal\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eUnscrew the base, fill around the centre tube, screw it back. Not as fast as a side-fill port, true. But bottom-fill tanks with threaded bases tend to seal more reliably than silicone-plug side fills, and the K2 has a solid reputation for staying dry. No leaking from the base, no weeping around the airflow. Practically speaking? Worth the extra five seconds.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eDelrin Drip Tip Keeps the Temperature Down\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe \u003c\/span\u003e\u003cspan\u003e510 Delrin drip tip\u003c\/span\u003e\u003cspan\u003e insulates heat from the stainless steel body. Metal drip tips get uncomfortably warm during chain vaping. Delrin stays cool. The 510 fitting also means you can swap it for any standard 510 drip tip if you prefer a different shape or bore. Browse the\u003c\/span\u003e\u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/drip-tips-and-mouthpieces\"\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/a\u003e\u003ca title=\"Drip Tips and Mouthpieces\" href=\"https:\/\/piratevapes.co.uk\/collections\/drip-tips-and-mouthpieces\" target=\"_blank\"\u003e\u003cstrong\u003eDrip Tips and Mouthpieces\u003c\/strong\u003e\u003c\/a\u003e\u003cspan\u003e collection for alternatives.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eK2 Vape Tank By Aspire Colours\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eTwo finishes. Both use the same stainless steel and pyrex construction.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003e#buttons\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\"\u003eBlack\u003c\/li\u003e\n\u003cli dir=\"ltr\"\u003eSilver\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eHow to Set Up the K2 Vape Tank By Aspire\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eSimple bottom-fill process. Takes a couple of minutes the first time.\u003c\/span\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eUnscrew the base\u003c\/span\u003e\u003cspan\u003e of the K2 from the glass tank body. The pre-installed 1.6ohm BVC coil stays attached to the base.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003ePut \u003c\/span\u003e\u003cspan\u003ethree to four drops of e-liquid\u003c\/span\u003e\u003cspan\u003e directly onto the exposed cotton visible through the coil's wicking slots. Rotate the coil and hit each port so the cotton absorbs evenly from all sides.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eReassemble the base\u003c\/span\u003e\u003cspan\u003e onto the glass tank. Hold the tank upside down and pour e-liquid carefully into the gap between the glass and the centre tube. Do not pour liquid down the centre tube. Fill to just below the top rim.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eFlip the tank right side up and \u003c\/span\u003e\u003cspan\u003escrew it onto your battery or mod\u003c\/span\u003e\u003cspan\u003e via the 510 connection. Finger-tight only.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eLeave it standing upright for six to seven minutes.\u003c\/span\u003e\u003cspan\u003e The BVC coil uses organic cotton that needs time to saturate fully from the base upward. Rushing this step chars the cotton and kills the coil before you get a single proper draw.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eTake two gentle primer puffs without pressing the fire button to help draw liquid into the wick. Then start vaping at \u003c\/span\u003e\u003cspan\u003elow voltage between 3.0V and 3.7V\u003c\/span\u003e\u003cspan\u003e and adjust upward gradually.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eWhat's in the K2 Vape Tank By Aspire Box\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eOne Aspire K2 tank with a \u003c\/span\u003e\u003cspan\u003e1.6ohm BVC Kanthal coil\u003c\/span\u003e\u003cspan\u003e already installed and ready to fill. \u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eOne \u003c\/span\u003e\u003cspan\u003ereplaceable 510 Delrin drip tip\u003c\/span\u003e\u003cspan\u003e fitted to the top. \u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eOne filling and coil change guide.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eNo e-liquid included. No battery. No spare coils. The K2 is the tank only, so you will need a compatible battery or mod and your choice of e-liquid to start vaping. \u003cstrong\u003eReplacement BVC coils\u003c\/strong\u003e are sold separately in packs of five.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eThe Slim MTL Tank for Pen Batteries and Low-Wattage Mods\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe K2 connects via a standard \u003c\/span\u003e\u003cspan\u003e510 thread\u003c\/span\u003e\u003cspan\u003e, which means it fits virtually any device with a 510 connection. Practically, it is designed for eGo-style pen batteries and low-wattage regulated mods running between \u003c\/span\u003e\u003cspan\u003e3.0V and 4.2V\u003c\/span\u003e\u003cspan\u003e. That covers most basic vape pens and smaller box mods operating under 15W.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eWhat it does not suit: high-wattage sub-ohm mods, temperature-control devices running at 30W or above, or DTL setups. The \u003c\/span\u003e\u003cspan\u003e1.6ohm coil\u003c\/span\u003e\u003cspan\u003e is built for low power. Pushing high wattage through it burns the cotton instantly. If you want DTL vaping, the\u003c\/span\u003e\u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/aspire-vapes\"\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/a\u003e\u003ca title=\"Aspire Range\" href=\"https:\/\/piratevapes.co.uk\/collections\/aspire-vapes\" target=\"_blank\"\u003e\u003cstrong\u003eAspire Range\u003c\/strong\u003e\u003c\/a\u003e\u003cspan\u003e has tanks built for that purpose.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eE-liquid pairing matters too. The K2 works best with \u003c\/span\u003e\u003cstrong\u003e50\/50 VG\/PG blends\u003c\/strong\u003e\u003cspan\u003e or higher-PG liquids. Thick \u003cstrong\u003ehigh-VG juice\u003c\/strong\u003e will not wick properly through the narrow BVC coil ports. Stick with \u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/50-50-e-liquids\"\u003e\u003cstrong\u003e50\/50\u003c\/strong\u003e\u003c\/a\u003e\u003c\/span\u003e\u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/50-50-e-liquids\" target=\"_blank\" title=\"50\/50 Nic Salts\" rel=\"noopener\"\u003e\u003cstrong\u003e Nic Salts\u003c\/strong\u003e\u003c\/a\u003e\u003cspan\u003e at 10mg or 20mg for the best MTL experience, or 50\/50 freebase at 6mg to 18mg.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eAbout Aspire\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe \u003cstrong\u003eK2 represents Aspire's\u003c\/strong\u003e approach to entry-level hardware: keep the engineering honest and the price low. The original K1 tank was one of the most widely recommended starter tanks in UK vape shops during its run, and the K2 refined it with improved airflow and the same \u003cstrong\u003eBVC coil platform\u003c\/strong\u003e that Aspire built its early reputation on. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe BVC system was a genuine innovation when it launched. Vertical coil orientation fed liquid more evenly than the horizontal designs that preceded it, and that engineering still holds up in the K2. Aspire has moved on to pod systems and mesh coils in their newer lines, but the K2 remains in production because there is still a customer who wants a simple glass tank on a pen battery. That is not nostalgia. That is a product doing its job.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eStock Up and Save\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe coil in the box will last you a week or two depending on how heavily you vape. After that, you need replacements. Picking up a five-pack of BVC coils alongside the tank means you are covered for well over a month without reordering. If the pyrex ever takes a knock,\u003c\/span\u003e\u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/replacement-tank-glass\"\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/a\u003e\u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/replacement-tank-glass\" target=\"_blank\" title=\"Replacement Glass\" rel=\"noopener\"\u003e\u003cstrong\u003eReplacement Glass\u003c\/strong\u003e\u003c\/a\u003e\u003cspan\u003e is available separately too. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eEvery order from\u003cstrong\u003e \u003c\/strong\u003e\u003c\/span\u003e\u003cstrong\u003ePirate Vapes\u003c\/strong\u003e\u003cspan\u003e ships the same day before 4 pm. TPD-compliant stock, age-verified checkout, over-18s only. Spend over £25 and delivery is on us with Free Pirate Post.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eConclusion\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe \u003cstrong\u003eAspire K2\u003c\/strong\u003e is a slim, no-nonsense \u003cstrong\u003eMTL clearomiser tank \u003c\/strong\u003efor vapers who want a simple glass-and-steel setup on a pen-style battery. No adjustable airflow, no wattage modes, no complexity. Just a \u003c\/span\u003e\u003cspan\u003e1.8ml pyrex tank\u003c\/span\u003e\u003cspan\u003e, a \u003c\/span\u003e\u003cstrong\u003e1.6ohm BVC coil\u003c\/strong\u003e\u003cspan\u003e, fixed bottom airflow, and a reliable bottom-fill system that does not leak. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eIt is not trying to be anything more than that, and it does not need to be. If your setup is a pen battery and a bottle of 50\/50, the K2 delivers. Browse more\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003evape accessories\u003c\/strong\u003e\u003cspan\u003e\u003cstrong\u003e \u003c\/strong\u003eand the full Aspire range at\u003c\/span\u003e\u003cstrong\u003e Pirate Vapes\u003c\/strong\u003e\u003cspan\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eFAQs\u003c\/span\u003e\u003c\/h2\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eWhat coils does the K2 tank use?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eAspire BVC (Bottom Vertical Coil) clearomiser coils. The \u003c\/span\u003e\u003cspan\u003e1.6ohm\u003c\/span\u003e\u003cspan\u003e version comes pre-installed. You can also use the 1.2ohm and 1.8ohm BVC coils for a slightly different draw. Sold in packs of five.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eWhat e-liquid works best in the K2?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003e50\/50 VG\/PG or higher-PG blends. The wicking ports are narrow and the wattage is low, so thick high-VG juice will cause dry hits. Nic salts at \u003c\/span\u003e\u003cspan\u003e10mg or 20mg\u003c\/span\u003e\u003cspan\u003e in 50\/50 are ideal for this tank.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eDoes the K2 tank fit my device?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eIf your device has a \u003c\/span\u003e\u003cspan\u003e510 thread\u003c\/span\u003e\u003cspan\u003e and runs between 3.0V and 4.2V, yes. The K2 is designed for eGo-style pen batteries and low-wattage mods. It will physically connect to higher-powered mods, but running it above 4.2V will burn the coil.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eIs the K2 the same as the K1?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eSimilar platform, but the K2 has four bottom airflow inlets instead of two. The draw is smoother as a result. Both use the same BVC coils and share the same 1.8ml capacity and 510 thread.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eDoes the K2 leak?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eNo. The bottom-fill, threaded-base design seals tightly. The fixed airflow also eliminates the loose airflow ring that causes leaking on adjustable tanks. As long as you do not overfill past the top of the glass, the K2 stays dry.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eCan I use the K2 for sub-ohm vaping?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eNot even slightly. The \u003c\/span\u003e\u003cspan\u003e1.6ohm coil\u003c\/span\u003e\u003cspan\u003e is built for mouth-to-lung draws between 3.0V and 4.2V. Sub-ohm wattages will destroy the coil immediately.\u003c\/span\u003e\u003c\/p\u003e","brand":"Aspire","offers":[{"title":"Black","offer_id":52537336725786,"sku":null,"price":7.95,"currency_code":"GBP","in_stock":true},{"title":"Silver","offer_id":52537336758554,"sku":null,"price":7.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0995\/5675\/3690\/files\/Aspire_K2_Vape_Tank.jpg?v=1784290579"},{"product_id":"aspire-odan-mini-sub-ohm-tank","title":"Aspire Odan Mini Sub-Ohm Tank","description":"\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eAspire Odan Mini Sub-Ohm Tank\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eA \u003cstrong\u003e25mm sub-ohm tank \u003c\/strong\u003ebuilt from \u003cstrong\u003e304 stainless steel \u003c\/strong\u003ewith quartz-reinforced glass, a self-sealing coil housing, and triple adjustable bottom airflow. The \u003cstrong\u003eAspire Odan Mini \u003c\/strong\u003eholds \u003cstrong\u003e2ml \u003c\/strong\u003ewith the standard glass or 4ml with the included diamond bubble glass, fills from the top via a slide-open cap, and takes \u003cstrong\u003eAspire Odan mesh coils\u003c\/strong\u003e in 0.2Ω and 0.3Ω. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eOne of each coil ships in the box. Thread it onto any mod with a \u003cstrong\u003e510 connection\u003c\/strong\u003e, fill it with\u003cstrong\u003e \u003ca title=\"High-VG Shortfill\" href=\"https:\/\/piratevapes.co.uk\/collections\/high-vg-e-liquid\" target=\"_blank\"\u003eHigh-VG Shortfill\u003c\/a\u003e\u003c\/strong\u003e, and it runs. \u003cstrong\u003ePirate Vapes \u003c\/strong\u003eships the Odan Mini with tracked age-verified UK delivery.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eWhy do vapers choose this:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003e304 stainless steel construction with a polished PVD coating. Built to last, resistant to daily wear, and available in six finishes that actually look good on a mod.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eQuartz-reinforced glass. Stronger than standard borosilicate. Less likely to crack from a bump or a drop.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eSelf-sealing coil housing. The e-liquid sits in the tank without touching the chimney, which reduces spit-back and keeps the draw clean. A small engineering detail that makes a noticeable difference.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003e80\/20 linen and organic cotton wicking. Not standard cotton. The linen fibre blend absorbs e-liquid more consistently, which means fewer dry hits when chain-vaping and cleaner flavour extraction across the coil’s life.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eTwo coils included. The 0.2Ω mesh comes pre-installed, and a 0.3Ω coil ships in the box alongside it. You can start vaping straight away and have a spare ready.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eTriple adjustable bottom airflow. Three airflow slots at the base of the tank, all independently adjustable. You can fine-tune the draw from a restricted DTL to a wide-open lung hit.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cstrong\u003eAvailable Colours\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003e#buttons\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eDark Blue\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eEmerald\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eRainbow\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eStainless Steel\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eSmoky Quartz\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eBlack\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eAspire Odan Mini Sub-Ohm Tank Features\u003c\/span\u003e\u003c\/h2\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003ePush Top Fill System\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eSlide the top cap to one side, and it reveals a single fill port. No unscrewing, no removing the drip tip, no hunting for a hidden latch. The mechanism is spring-loaded, so it slides shut and seals when you let go. Refilling takes a few seconds and works with any standard shortfill nozzle.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eSelf-Sealing Coil Housing\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe Odan Mini uses a coil housing design that isolates the e-liquid from the chimney. In practical terms, this means the liquid only contacts the coil and wick, not the air path above it. The result is less spit-back, less gurgling, and a cleaner draw from the first hit to the last. It is one of the features that sets the Odan Mini apart from more basic sub-ohm tanks.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eAspire Odan Coil Series\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe tank ships with two coils. The 0.2Ω mesh coil comes pre-installed and is the higher-power option: more vapour, more flavour intensity, suited to 50W and above. The 0.3Ω mesh coil is included in the box and runs at a slightly lower wattage with a cooler, smoother draw. Both use the 80\/20 linen and organic cotton wicking blend. Replacement Aspire Odan coils are sold separately in packs of three.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003e810 Honeycomb Resin Drip Tip\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eWide-bore 810 fitting for open airflow, with a honeycomb resin pattern that gives each colour variant a slightly different look. The resin stays cooler on the lips than metal or plastic tips during extended sessions.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eDiamond Bubble Glass\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe standard glass gives you a 2 mL capacity (TPD compliant). The diamond bubble glass, included in the box, expands capacity to 4ml. The bubble shape sits flush with the tank body, and the diamond pattern adds a textural detail that matches the overall design. If you vape heavily on high-VG shortfills, the 4ml glass means fewer refills through the day.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eWhat E-Liquid to Use\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eHigh VG. 60\/40 or thicker. The Odan Mini is a sub-ohm DTL tank running mesh coils below 1.0Ω, and it is designed for thick shortfill e-liquids. Fruits, desserts, menthols, bakery flavours: whatever you prefer, keep the VG at 60% or above. Do not put nic salts or thin 50\/50 liquids through this tank. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe coils are not designed for it, and the high wattage will deliver too much nicotine too fast. For sub-ohm vaping, 6mg nicotine strength or lower is recommended. Browse our e-liquid range at\u003cstrong\u003e Pirate Vapes\u003c\/strong\u003e for shortfills that pair well with sub-ohm tanks.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eHow to Set Up the Aspire Odan Mini\u003c\/span\u003e\u003c\/h2\u003e\n\u003col\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eUnscrew the base and ensure the pre-installed coil is pushed firmly into place.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eDrip 3–4 drops of e-liquid directly onto the coil's exposed cotton ports.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003ePull off the 2ml tube and press on the 4ml diamond glass if you want more capacity.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eScrew the base back on and thread the tank onto your mod's 510 connection.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003ePush the top cap open, fill the tank, and let it spring shut.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eLet it sit before firing so the thick liquid fully saturates the linen-cotton blend.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eStart at 40W to break in the coil, adjust the bottom airflow, and ramp up to 50W+.\u003c\/span\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eWhat’s in the Box\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003e1 x Aspire Odan Mini Sub-Ohm Tank\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003e1 x Aspire Odan 0.2Ω Mesh Coil (pre-installed)\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003e1 x Aspire Odan 0.3Ω Coil\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003e1 x Diamond Bubble Glass (4ml)\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003e1 x User Manual\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003e1 x Warranty Card\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eCompatibility\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe \u003cstrong\u003eAspire Odan Mini\u003c\/strong\u003e uses a standard 510 threaded connection, which means it fits the vast majority of vape mods on the market. If your mod has a 510 connector and can fire at the wattage the Odan coils need (typically 50W and above for the 0.2Ω, slightly less for the 0.3Ω), it will work. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe tank uses Aspire Odan coils only. Not Aspire Nautilus, not \u003cstrong\u003eAspire PockeX\u003c\/strong\u003e, not any other Aspire coil range. Make sure you order the correct coils when restocking. \u003cstrong\u003ePirate Vapes\u003c\/strong\u003e stocks the Odan Mini tank and the \u003cstrong\u003eAspire Odan replacement coils\u003c\/strong\u003e together in our \u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/aspire-vapes\" title=\"Aspire Range\" target=\"_blank\"\u003e\u003cstrong\u003eAspire Range\u003c\/strong\u003e\u003c\/a\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eAbout Aspire\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eAspire has been making vape hardware since the early days of the UK vaping market. The Nautilus range defined \u003cstrong\u003e\u003ca title=\"MTL Vaping\" href=\"https:\/\/piratevapes.co.uk\/collections\/mtl-vape-kits\" target=\"_blank\"\u003eMTL Vaping\u003c\/a\u003e \u003c\/strong\u003efor years, and the Odan series brought that same build quality to sub-ohm\u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/dtl-tanks\"\u003e \u003c\/a\u003e\u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/dtl-tanks\" target=\"_blank\" title=\"https:\/\/piratevapes.co.uk\/collections\/dtl-tanks\" rel=\"noopener\"\u003e\u003cstrong\u003eDTL Tanks\u003c\/strong\u003e\u003c\/a\u003e. The Odan Mini is the compact version of the full-size Odan, designed for vapers who want the flavour and cloud production of a sub-ohm tank in a smaller, more portable form. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe 304 stainless steel construction, quartz glass, and self-sealing coil housing reflect Aspire’s focus on durability and clean engineering. It is a tank built to sit on a mod for months without showing wear.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eStock Up and Save\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe tank ships with two coils, but they will not last forever. Having a pack of replacement \u003cstrong\u003eAspire Odan coils \u003c\/strong\u003eready means you are never stuck with a burnt coil and a tank you cannot use. Add a shortfill alongside the coils and your order is sorted. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003ePirate Vapes sends everything in plain packaging, tracked to your door, age-verified checkout, and 18+ delivery. Crew Rewards points go on every order. If you want coils arriving without thinking about it, set up The Crow’s Nest at \u003cstrong\u003ePirate Vapes\u003c\/strong\u003e, and they come on repeat with a saving.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eConclusion\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003e25mm sub-ohm tank. 304 stainless steel with quartz-reinforced glass. 2ml standard capacity, 4ml with the included diamond bubble glass. Self-sealing coil housing for a clean, spit-free draw. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eTriple adjustable bottom airflow. Push-top fill. Two\u003cstrong\u003e Aspire Odan mesh coils\u003c\/strong\u003e included (0.2Ω pre-installed, 0.3Ω spare). 80\/20 linen and organic cotton wicking. 510 connection. Available in six colours. Grab one from \u003cstrong\u003ePirate Vape\u003c\/strong\u003es with tracked, age-verified UK delivery.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eFAQs\u003c\/span\u003e\u003c\/h2\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eWhat is the e-liquid capacity?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003e2ml with the standard glass (TPD compliant). 4ml with the diamond bubble glass, which is included in the box.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eWhich coils does it use?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eAspire Odan coils. The tank ships with a 0.2Ω mesh coil (pre-installed) and a 0.3Ω coil. Replacement coils are sold separately in packs of three.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eWill it fit my mod?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eIf your mod has a 510 connection and can fire at 50W or above, it will work. The 510 thread is the standard connection for sub-ohm tanks.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eWhat e-liquid should I use?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eHigh-VG shortfills. 60\/40 VG\/PG or thicker. Do not use nic salts or thin 50\/50 liquids. For sub-ohm vaping, 6mg nicotine or lower is recommended.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eHow do I fill the tank?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eSlide the top cap to reveal the fill port. Fill around the central chimney. Let the cap spring back to seal.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eHow do I change the coil?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003ePull the old coil out of the base of the tank. Push the new one in until it seats. Prime it with a few drops of e-liquid, fill the tank, and wait five minutes before vaping.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eIs the diamond bubble glass included?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eYes. The 4ml diamond bubble glass is included in the box alongside the standard 2ml glass.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eWhat colours are available?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eDark Blue, Emerald, Rainbow, Stainless Steel, Smoky Quartz, and Black.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eIs this suitable for mouth-to-lung vaping?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe Odan Mini is designed primarily for DTL sub-ohm vaping. The airflow can be restricted, but it is not an MTL tank. If you want a tight cigarette-style draw, this is not the right tank.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eDoes Pirate Vapes stock the replacement coils?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eYes. Aspire Odan replacement coils are in our Aspire range at Pirate Vapes.\u003c\/span\u003e\u003c\/p\u003e","brand":"Aspire","offers":[{"title":"Dark Blue","offer_id":52537372508442,"sku":null,"price":13.99,"currency_code":"GBP","in_stock":true},{"title":"Emerald","offer_id":52537372541210,"sku":null,"price":13.99,"currency_code":"GBP","in_stock":true},{"title":"Rainbow","offer_id":52537372573978,"sku":null,"price":13.99,"currency_code":"GBP","in_stock":true},{"title":"Stainless Steel","offer_id":52537372606746,"sku":null,"price":13.99,"currency_code":"GBP","in_stock":true},{"title":"Smoky Quartz","offer_id":52537372639514,"sku":null,"price":13.99,"currency_code":"GBP","in_stock":true},{"title":"Black","offer_id":52537372672282,"sku":null,"price":13.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0995\/5675\/3690\/files\/Aspire_Odan_Mini_Sub-Ohm_Tank.jpg?v=1784291777"},{"product_id":"uwell-whirl-2-tank","title":"Uwell Whirl 2 Sub-Ohm Tank","description":"\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eUwell Whirl 2 Sub-Ohm Tank\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eA 25mm tank built for both \u003cstrong\u003eMTL \u003c\/strong\u003eand \u003cstrong\u003eDTL vaping\u003c\/strong\u003e, with a 3.5ml capacity, \u003cstrong\u003e304 stainless steel\u003c\/strong\u003e construction, and \u003cstrong\u003eUwell’s Pro-FOCS coil \u003c\/strong\u003etechnology. The Whirl 2 ships with two coils: a 1.8Ω single coil for a tight \u003cstrong\u003emouth-to-lung draw \u003c\/strong\u003eat 10 to 15W, and a 0.6Ω dual coil for a looser direct-to-lung hit at 18 to 22W. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eQuarter-turn top fill, dual slotted adjustable airflow with five bored holes, and a curved top cap that wraps around the glass to protect it from knocks. Thread it onto any 510 mod, and it runs. \u003cstrong\u003ePirate Vapes\u003c\/strong\u003e ships the Whirl 2 tracked with age-verified UK delivery.\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eWhy do vapers choose this:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eMTL and DTL in one tank. The 1.8Ω coil gives a tight, cigarette-style draw at low wattage. The 0.6Ω coil opens things up for a looser lung hit with more vapour. Swap the coil, adjust the airflow, and the tank changes character completely. No need to own two tanks for two vaping styles.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003ePro-FOCS coil technology. Uwell’s proprietary flavour-testing system ensures each coil meets a consistent performance standard. The result is reliable flavour from coil to coil, with fewer duds in a pack than you get with some brands.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eGlass protection built into the design. The curved top cap and the airflow control ring both extend past the glass, creating a physical shield around it. A bump on a table edge hits the steel, not the glass. It is a small detail that matters when the tank lives in your pocket.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003e3.5ml capacity. Larger than most 2ml TPD tanks without being oversized. Fewer refills through the day, especially on the 1.8Ω MTL coil where e-liquid consumption is low.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eTwo coils and a spare glass in the box. Both coils included, plus an extra glass tube and replacement O-rings. You have everything you need to start vaping and a backup for when something breaks.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eAvailable Colours\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003e#buttons\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eBlack\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eSilver\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eBlue\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eRed and Black\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eUwell Whirl 2 Sub-Ohm Tank Features\u003c\/span\u003e\u003c\/h2\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eDual Coil System: MTL and DTL\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe 1.8Ω single coil runs at 10 to 15W and is designed for mouth-to-lung vaping. It produces minimal vapour, delivers a firm throat hit, and works well with higher-nicotine freebase liquids. The draw is tight and controlled, close to a cigarette. The 0.6Ω dual coil runs at 18 to 22W and opens the draw for direct-to-lung vaping. More vapour, more flavour intensity, and a warmer hit. Both coils use Uwell’s Pro-FOCS technology for consistent performance.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eAdjustable Airflow with Five Bored Holes\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe airflow control ring at the base of the tank has dual slots with five differently sized bored holes. Rotate the ring to open or close the airflow incrementally. Fully closed gives a tight MTL draw. Fully open gives a loose DTL inhale. Anywhere in between gives a restricted draw that sits between the two styles. The airflow is smooth, with no rattling or stiffness, and holds its position once set.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eQuarter-Turn Top Fill\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eA quarter-turn of the top cap reveals the fill port. No unscrewing, no removing the drip tip, no fiddling with silicone plugs. The mechanism is quick, straightforward, and designed to minimise spills. The lower-profile design of the Whirl 2 also means vapour travels a shorter distance from coil to drip tip, which helps preserve flavour accuracy.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eCurved Glass Protection\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe top cap and the airflow ring at the base both curve around the glass section, creating a concave profile that recesses the glass below the level of the steel. If the tank takes a knock, the metal absorbs the impact instead of the glass. It is a practical design choice for a tank that gets carried in pockets and bags daily.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eWhat E-Liquid to Use\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eHigh VG e-liquids work best with both coils. \u003cstrong\u003e60\/40 VG\/PG\u003c\/strong\u003e or thicker. For the 1.8Ω MTL coil, you can also use 50\/50 freebase or higher-PG blends at higher nicotine strengths (up to 18mg). For the 0.6Ω DTL coil, stick with \u003ca title=\"High-VG Shortfills\" href=\"https:\/\/piratevapes.co.uk\/collections\/high-vg-e-liquid\" target=\"_blank\"\u003e\u003cstrong\u003eHigh-VG Shortfills\u003c\/strong\u003e\u003c\/a\u003e at 6mg nicotine or lower. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eDo not put nic salts through the 0.6Ω DTL coil. The higher wattage and open draw will deliver too much nicotine too fast. Browse our \u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/e-liquids\" title=\"E-liquid Range\" target=\"_blank\"\u003e\u003cstrong\u003eE-liquid Range\u003c\/strong\u003e\u003c\/a\u003e at \u003cstrong\u003ePirate Vapes\u003c\/strong\u003e for shortfills and \u003cstrong\u003e50\/50 liquids\u003c\/strong\u003e that pair well with the Whirl 2.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eHow to Set Up the Uwell Whirl 2\u003c\/span\u003e\u003c\/h2\u003e\n\u003col\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eUnscrew the base of the tank and make sure the pre-installed 1.8Ω coil is pressed firmly into place.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eDrip 3–4 drops of e-liquid directly onto the exposed cotton ports on the side of the coil.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eScrew the tank base back together, then thread the 510 connection onto your mod until snug.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eGive the top cap a quarter-turn to remove it, fill the 3.5ml reservoir through the port, and twist the cap back on to lock it.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eLet the tank sit undisturbed to let the Pro-FOCS wicking material fully saturate.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eSet your mod between 10–15W for the pre-installed 1.8Ω MTL coil (or 18–22W if you swap to the 0.6Ω DTL coil).\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eRotate the bottom ring to select your preferred airflow holes, and you are ready to go.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eWhat’s in the Box\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003e1 x Uwell Whirl II Tank\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003e1 x Uwell Whirl 1.8Ω Single Coil (pre-installed)\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003e1 x Uwell Whirl 0.6Ω Dual Coil\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003e1 x Extra Glass Tube\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003e1 x Pack of Replacement O-Rings\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003e1 x User Manual\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003e1 x Drip Tip Cover\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eCompatibility\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe \u003cstrong\u003eUwell Whirl 2\u003c\/strong\u003e uses a standard 510 threaded connection. It fits the vast majority of vape mods on the market. The 0.6Ω coil needs a mod that can fire at 18 to 22W. The 1.8Ω coil needs a mod that can fire at 10 to 15W. Both wattage ranges are within the output of almost any regulated mod. The tank uses Uwell Whirl coils only. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eNot Uwell Crown coils, not \u003cstrong\u003eUwell Caliburn coils\u003c\/strong\u003e. Make sure you order the correct coils when restocking. Pirate Vapes stocks the Whirl 2 tank and the Uwell Whirl replacement coils together in our \u003ca rel=\"noopener\" title=\"Uwell Range\" href=\"https:\/\/piratevapes.co.uk\/collections\/uwell-vapes\" target=\"_blank\"\u003e\u003cstrong\u003eUwell Range\u003c\/strong\u003e\u003c\/a\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eAbout Uwell\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eUwell is best known in the UK for the Crown and Caliburn lines, but the Whirl series is where the brand’s MTL and crossover tanks live. The original \u003cstrong\u003eWhirl tank\u003c\/strong\u003e was a bestseller for mouth-to-lung vapers, and the \u003cstrong\u003eWhirl 2 \u003c\/strong\u003ebuilds on that with a revised airflow system, a dual-coil option for DTL, and \u003cstrong\u003ePro-FOCS technology \u003c\/strong\u003efor more consistent flavour. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eIt is one of the few tanks on the market that genuinely works for both MTL and DTL without compromise, which makes it a strong choice for vapers who want flexibility without owning multiple setups.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eStock Up and Save\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe tank ships with two coils, but they will not last forever. Having a pack of\u003cstrong\u003e Uwell Whirl replacement coils\u003c\/strong\u003e ready means you are never stuck on a burnt coil with a tank you cannot use. Add a shortfill or a bottle of \u003cstrong\u003e50\/50 \u003c\/strong\u003ealongside the coils and your order is sorted. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003e\u003cstrong\u003ePirate Vapes \u003c\/strong\u003esends everything in plain packaging, tracked to your door, age-verified checkout, 18+ delivery. Crew Rewards points go on every order. If you want coils arriving without thinking about it, set up The Crow’s Nest at \u003cstrong\u003ePirate Vapes\u003c\/strong\u003e and they come on repeat with a saving.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eConclusion\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003e25mm sub-ohm tank with genuine MTL and DTL capability. 3.5ml capacity. 304 stainless steel with curved glass protection. \u003cstrong\u003eUwell Pro-FOCS coil technology\u003c\/strong\u003e. Two coils included: 1.8Ω at 10 to 15W for MTL, 0.6Ω at 18 to 22W for DTL. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eDual slotted adjustable airflow with five bored holes. Quarter-turn top fill. 510 connection. Available in four colours. Grab one from \u003cstrong\u003ePirate Vapes\u003c\/strong\u003e with tracked, age-verified UK delivery.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eFAQs\u003c\/span\u003e\u003c\/h2\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eWhat is the e-liquid capacity?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003e3.5ml.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eCan this tank do both MTL and DTL?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eYes. The 1.8Ω coil is for MTL. The 0.6Ω coil is for DTL. The adjustable airflow lets you fine-tune the draw for either style.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eWhich coils does it use?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eUwell Whirl coils. The tank ships with a 1.8Ω single coil (pre-installed) and a 0.6Ω dual coil. Replacement coils are sold separately in packs of four.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eWill it fit my mod?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eIf your mod has a 510 connection and can fire between 10W and 22W, it will work. The 510 thread is the standard connection for vape tanks.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eWhat e-liquid should I use?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eHigh VG (60%+) for both coils. The 1.8Ω MTL coil can also handle 50\/50 blends. For the 0.6Ω DTL coil, use high-VG shortfills at 6mg nicotine or lower.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eIs a spare glass included?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eYes. An extra glass tube, replacement O-rings, and a drip tip cover are all included in the box.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eWhat colours are available?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eBlack, Silver, Blue, and Red and Black.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eIs this suitable for beginners?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eYes. The Whirl 2 is straightforward to set up and use. The MTL coil and tight airflow setting make it a good starting point for ex-smokers.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eHow do I change the coil?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003ePull the old coil out of the base of the tank. Push the new one in until it seats. Prime it with a few drops of e-liquid, fill the tank, and wait five minutes before vaping.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eDoes Pirate Vapes stock the replacement coils?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eYes. Uwell Whirl replacement coils are in our Uwell range at Pirate Vapes.\u003c\/span\u003e\u003c\/p\u003e","brand":"Uwell","offers":[{"title":"Black","offer_id":52537389187354,"sku":null,"price":12.99,"currency_code":"GBP","in_stock":true},{"title":"Silver","offer_id":52537389220122,"sku":null,"price":12.99,"currency_code":"GBP","in_stock":true},{"title":"Blue","offer_id":52537389252890,"sku":null,"price":12.99,"currency_code":"GBP","in_stock":true},{"title":"Red \u0026 Black","offer_id":52537389285658,"sku":null,"price":12.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0995\/5675\/3690\/files\/Uwell_Whirl_2_Sub-Ohm_Tank.jpg?v=1784292389"},{"product_id":"innokin-go-max-tank","title":"Innokin GOMax Vape Tank","description":"\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eInnokin GOMax Vape Tank\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eNo coil changes. No maintenance. Just fill it, vape it, and replace the whole tank when the coil is done. The\u003cstrong\u003e Innokin GOMax i\u003c\/strong\u003es a 29mm disposable sub-ohm tank with a built-in \u003cstrong\u003ePlex-3D Matrix mesh coil\u003c\/strong\u003e, 2ml capacity, sliding top fill, and adjustable bottom airflow. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eIt threads onto any 510 mod, runs on \u003ca title=\"High-VG Shortfills\" href=\"https:\/\/piratevapes.co.uk\/collections\/high-vg-e-liquid\" target=\"_blank\"\u003e\u003cstrong\u003eHigh-VG Shortfills\u003c\/strong\u003e\u003c\/a\u003e, and delivers DTL clouds and flavour without a single tool or spare part. When the coil burns out, you swap the tank. Available in five colours at \u003cstrong\u003ePirate Vapes\u003c\/strong\u003e with tracked, age-verified UK delivery.\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eWhy do vapers choose this:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eNo coil changes. The coil is built into the tank. When it starts tasting burnt, you do not unscrew anything, pull out wicking, or prime a new coil head. You take the old tank off, thread a new one on, fill it, and vape. The entire maintenance process takes thirty seconds and zero experience.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003ePlex-3D Matrix mesh coil. Innokin’s mesh design heats e-liquid faster and more evenly than a standard wire coil. The grooved and notched mesh surface increases the contact area with the cotton, which improves wicking and produces denser clouds with sharper flavour. It is the same coil technology Innokin uses in its Zenith and GoMax Tube lines.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eAdjustable airflow. The dual slotted airflow ring at the base of the tank lets you control the draw from a moderately restricted DTL inhale to a wide-open lung hit. You get to set the airflow where you want it and leave it.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003ePCTG plastic construction. Lighter and more impact-resistant than glass. If you drop it, it does not shatter. PCTG is also recyclable, which makes it a better choice than a tank you throw in the bin with a glass section attached.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003ePrice. At the cost of a coffee, the GOMax gives you a full sub-ohm DTL tank with a mesh coil, adjustable airflow, and top fill. For vapers who want to try sub-ohm vaping without committing to a multi-coil tank setup, or for anyone who just wants a simple, affordable tank that works, it is hard to argue with.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eAvailable Colours\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003e#buttons\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eBlack\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eGreen\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eBlue\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003ePink\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eClear\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eInnokin GOMax Vape Tank Features\u003c\/span\u003e\u003c\/h2\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eSliding Top Fill\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eSlide the top cap to one side to reveal the fill port. A silicone seal sits beneath the cap to prevent leaks when the tank is closed. The mechanism is simple, quick, and works well with standard shortfill nozzles. You can refill the tank without removing it from your mod.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003ePlex-3D Matrix Mesh Coil\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe mesh coil sits inside the tank and cannot be removed or replaced. It is designed for sub-ohm DTL vaping at higher wattages. The Plex-3D mesh pattern uses grooves and notches across the mesh surface to increase the area in contact with the organic cotton wick. This means faster heating, more consistent vapour production, and better flavour extraction from high-VG shortfills. When the coil reaches the end of its life, you replace the entire tank.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eAdjustable Airflow\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe dual slotted airflow control ring is integrated into the base of the tank. Rotate it to open or close the airflow. Fully open gives a loose, airy DTL draw with maximum vapour. Close it down for a more restricted inhale with a warmer, denser hit. The ring holds its position once set and does not slide during use.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003ePCTG Plastic Construction\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe tank body is made from PCTG, a food-grade plastic used across the vaping industry for its clarity, impact resistance, and chemical stability. It will not crack if you drop it, and it is lighter than a glass-and-steel tank. PCTG is also compatible with most e-liquid types, though heavily acidic or citrus-heavy flavours may cause clouding over extended use.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eWhat E-Liquid to Use\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eHigh VG. \u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/70-30-shortfills\" title=\"70\/30 VG\/PG\" target=\"_blank\"\u003e\u003cstrong\u003e70\/30 VG\/PG \u003c\/strong\u003e\u003c\/a\u003eor thicker. The GOMax is a sub-ohm DTL tank running a low-resistance mesh coil, and it is built for thick shortfill e-liquids. Fruits, desserts, menthols, bakery flavours: whatever you like, keep the VG at 70% or above. Do not put nic salts or thin \u003cstrong\u003e\u003ca title=\"50\/50 Liquids\" href=\"https:\/\/piratevapes.co.uk\/collections\/50-50-e-liquids\" target=\"_blank\"\u003e50\/50 Liquids\u003c\/a\u003e \u003c\/strong\u003ethrough this tank. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe low coil resistance and open airflow will deliver too much nicotine too fast with nic salts. Stick to 6mg nicotine or lower for sub-ohm vaping. Browse our e-liquid range at \u003cstrong\u003ePirate Vapes\u003c\/strong\u003e for shortfills that pair well with sub-ohm tanks.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eHow to Set Up the Innokin GOMax\u003c\/span\u003e\u003c\/h2\u003e\n\u003col\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eThread the GOMax tank onto your mod's 510 connection until it is finger-tight (no coil installation needed).\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eSlide the top cap over to open the port, fill the 2ml reservoir with high-VG shortfill, and slide it back to seal.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eLet the tank sit completely undisturbed so the built-in Plex-3D Matrix mesh coil can fully saturate.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eSet your mod between 60–80W (start at 50W for the first few puffs to gently break in the fresh wick).\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eTwist the integrated bottom airflow ring to your preferred draw width, press fire, and vape.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eWhat’s in the Box\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003e1 x Innokin GOMax Disposable Tank (coil pre-installed)\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003e1 x User Manual\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eCompatibility\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe Innokin \u003cstrong\u003eGOMax \u003c\/strong\u003euses a standard 510 threaded connection. It fits any mod with a 510 connector that can fire at the wattage the 0.19Ω mesh coil needs. The \u003cstrong\u003eGOMax \u003c\/strong\u003ewas originally designed for the Innokin\u003cstrong\u003e GoMax Tube Kit\u003c\/strong\u003e, but it works with any compatible \u003cstrong\u003e510 mod\u003c\/strong\u003e. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe coil is not replaceable. When it burns out, you replace the whole tank. There are no replacement coils to buy for this product. \u003cstrong\u003ePirate Vapes \u003c\/strong\u003estocks the \u003cstrong\u003eGOMax tank\u003c\/strong\u003e in our \u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/innokin-vapes\" title=\"Innokin Range\" target=\"_blank\"\u003e\u003cstrong\u003eInnokin Range\u003c\/strong\u003e\u003c\/a\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eAbout Innokin\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eInnokin has been making vape hardware since 2011 and has a strong reputation in the UK for beginner-friendly, well-built products. The \u003cstrong\u003eEndura \u003c\/strong\u003eand \u003cstrong\u003eZenith \u003c\/strong\u003elines are staples in vape shops across the country. The GOMax sits in a different part of the range: it is a \u003cstrong\u003edisposable sub-ohm tank\u003c\/strong\u003e designed for simplicity and affordability. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eNo\u003cstrong\u003e \u003ca title=\"Replacement Coils\" href=\"https:\/\/piratevapes.co.uk\/collections\/vape-coils\" target=\"_blank\"\u003eReplacement Coils\u003c\/a\u003e \u003c\/strong\u003eto track down, no maintenance schedule, no learning curve. Fill it, vape it, replace it. It is one of the most straightforward ways to get into sub-ohm \u003cstrong\u003eDTL vaping \u003c\/strong\u003ewithout spending a lot or dealing with complicated hardware.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eStock Up and Save\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eAt the price of the \u003cstrong\u003eGOMax\u003c\/strong\u003e, it makes sense to pick up two or three at once. When the coil in your current tank starts fading, you have a fresh one ready to go. Add a \u003cstrong\u003eshortfill \u003c\/strong\u003eand your order is sorted. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eFree Pirate Post on orders over £25. Same-day dispatch before 4pm. Crew Rewards points on every order. Everything ships in plain packaging, tracked and age-verified.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eConclusion\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003e29mm disposable sub-ohm tank with a built-in\u003cstrong\u003e Plex-3D Matrix mesh coil.\u003c\/strong\u003e 2ml capacity. PCTG plastic construction. Sliding top fill with silicone seal. Adjustable dual slotted bottom airflow. 510 connection. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eDTL vaping on \u003cstrong\u003ehigh-VG shortfills\u003c\/strong\u003e. No coil changes, no maintenance. Replace the tank when the coil is done. Available in five colours at\u003cstrong\u003e Pirate Vapes\u003c\/strong\u003e with tracked, age-verified UK delivery.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eFAQs\u003c\/span\u003e\u003c\/h2\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eIs this a disposable tank?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eYes. The coil is built in and cannot be replaced. When the coil burns out, you replace the entire tank.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eWhat is the e-liquid capacity?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003e2ml.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eCan I replace the coil?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eNo. The Plex-3D mesh coil is fixed inside the tank. This is a disposable tank. When the coil is spent, you swap the whole tank for a new one.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eWill it fit my mod?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eIf your mod has a 510 connection and can fire at the wattage the 0.19Ω coil needs, it will work. The 510 thread is the standard connection for sub-ohm tanks.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eWhat e-liquid should I use?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eHigh-VG shortfills. 70\/30 VG\/PG or thicker. Do not use nic salts or thin 50\/50 liquids. For sub-ohm vaping, 6mg nicotine or lower is recommended.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eHow do I fill the tank?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eSlide the top cap to reveal the fill port. Fill with your chosen shortfill. Slide the cap back to seal.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eWhat colours are available?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eBlack, Green, Blue, Pink, and Clear.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eHow long does the coil last?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eCoil life depends on how often you vape, the sweetness of your e-liquid, and your wattage. Expect roughly the same lifespan as a standard sub-ohm coil head.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eIs this compatible with the Innokin GoMax Tube Kit?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eYes. The GOMax tank was designed for the Innokin GoMax Tube Kit, but it also works with any 510-compatible mod.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eDoes Pirate Vapes stock this tank?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eYes. The Innokin GOMax is in our Innokin range at Pirate Vapes.\u003c\/span\u003e\u003c\/p\u003e","brand":"Innokin","offers":[{"title":"Black","offer_id":52537392726298,"sku":null,"price":2.49,"currency_code":"GBP","in_stock":true},{"title":"Green","offer_id":52537392759066,"sku":null,"price":2.49,"currency_code":"GBP","in_stock":true},{"title":"Blue","offer_id":52537392791834,"sku":null,"price":2.49,"currency_code":"GBP","in_stock":true},{"title":"Pink","offer_id":52537392824602,"sku":null,"price":2.49,"currency_code":"GBP","in_stock":true},{"title":"Clear","offer_id":52537392857370,"sku":null,"price":2.49,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0995\/5675\/3690\/files\/Innokin_GOMax_Vape_Tank.jpg?v=1784293009"},{"product_id":"innokin-zlide-tank","title":"Innokin Zlide Replacement Tank","description":"\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eInnokin Zlide Replacement Tank\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003e\u003cstrong\u003e22mm MTL tank\u003c\/strong\u003e with a child-proof sliding top fill, Pyrex glass, stainless steel construction, and compatibility with the full \u003cstrong\u003eInnokin Z coil range\u003c\/strong\u003e. The \u003cstrong\u003eZlide \u003c\/strong\u003eholds 2ml, takes a \u003cstrong\u003e0.48Ω Plex3D mesh coil \u003c\/strong\u003eand a \u003cstrong\u003e1.6Ω Kanthal coil\u003c\/strong\u003e (both included), and lets you change coils without emptying the tank. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eDesigned in collaboration with vape reviewers \u003cstrong\u003ePhil Busardo\u003c\/strong\u003e and \u003cstrong\u003eDimitris Agrafiotis \u003c\/strong\u003eto deliver clean MTL flavour in a compact, affordable package. Thread it onto any 510 mod, and it runs. \u003cstrong\u003ePirate Vapes\u003c\/strong\u003e ships the Zlide tracked with age-verified UK delivery.\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eWhy do vapers choose this:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eCoil changes without opening the tank. The Zlide lets you unscrew the old coil from the base and screw the new one in without removing the top cap, without draining the e-liquid, and without making a mess. It is one of the cleanest coil-swap systems on any \u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/mtl-tanks\" target=\"_blank\" title=\"MTL Tank\" rel=\"noopener\"\u003e\u003cstrong\u003eMTL Tank\u003c\/strong\u003e\u003c\/a\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eChild-proof sliding top fill. The mouthpiece has to be removed before the top cap will slide open. With the mouthpiece in place, the cap is locked shut. It is a genuine child-proofing mechanism, not just a stiff top cap. For households with children, this matters.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eFull Innokin Z coil compatibility. The Zlide takes every coil in the Innokin Zenith Z coil range. That is a large selection: \u003cstrong\u003e0.3Ω, 0.48Ω, 0.5Ω, 0.8Ω, 1.0Ω, 1.2Ω, and 1.6Ω\u003c\/strong\u003e. You can fine-tune your vaping style from tight MTL to restricted DTL without changing the tank.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003ePlex3D mesh coil included. The 0.48Ω mesh coil uses a three-dimensional mesh pattern that increases surface area for more even heating, better flavour extraction, and longer coil life compared to standard round-wire coils.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eDesigned with Phil Busardo and Dimitris Agrafiotis. The Zlide was a collaboration between Innokin and two of the most respected independent vape reviewers. It was built to be a more affordable alternative to the Zenith tank while keeping the same coil system and core performance.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eAvailable Colours\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003e#buttons\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eBlack\u003c\/span\u003e\u003c\/li\u003e\n\u003cli role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eSilver\u003c\/span\u003e\u003c\/li\u003e\n\u003cli role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eGunmetal\u003c\/span\u003e\u003c\/li\u003e\n\u003cli role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eBlue\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eInnokin Zlide Vape Tank Features\u003c\/span\u003e\u003c\/h2\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eChild-Proof Sliding Top Fill\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eRemove the mouthpiece, then slide the top cap to one side to reveal the fill port. Fill with your chosen e-liquid. Slide the cap back, replace the mouthpiece, and the top is locked. The child-proof mechanism is built into the mouthpiece lock, which means the tank will not open accidentally in a pocket or bag. It adds a couple of seconds to refilling, but it removes any risk of a child accessing the e-liquid inside.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eScrew-In Coil Replacement\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe coil screws into the base of the tank from below. To change it, unscrew the base, pull the old coil out, and screw the new one in. The e-liquid stays in the tank during the swap. No draining, no spills, no wasted liquid. Prime the new coil with a few drops and you are ready to vape within five minutes.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eInnokin Z Coil Range\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe tank ships with two coils. The \u003cstrong\u003e0.48Ω Plex3D mesh coil \u003c\/strong\u003eis pre-installed and works well with \u003ca title=\"High-VG E-Liquids\" href=\"https:\/\/piratevapes.co.uk\/collections\/high-vg-e-liquid\" target=\"_blank\"\u003e\u003cstrong\u003eHigh-VG E-Liquids\u003c\/strong\u003e\u003c\/a\u003e for a warmer, slightly airier restricted DTL draw. The 1.6Ω Kanthal coil is in the box for a tighter MTL hit at lower wattage, paired with 50\/50 or higher-PG e-liquids. Beyond these two, the Zlide accepts the full\u003cstrong\u003e Z coil range\u003c\/strong\u003e sold separately, including the 0.8Ω and 1.2Ω options that sit between the two included coils in terms of draw and warmth.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eAdjustable Airflow\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe airflow control ring at the base of the tank adjusts the draw from tight MTL to a slightly more open restricted DTL. For ex-smokers, closing the airflow and using the 1.6Ω coil gives a draw that closely mimics a cigarette. Opening it up with the 0.48Ω mesh coil gives a looser, more flavourful vape with a bit more vapour.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003ePyrex Glass and Compact Design\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe tank section is Pyrex glass, which resists cracking from heat and is chemically inert with e-liquid ingredients. The 22mm diameter fits flush on most slim mods and pen-style devices without overhang. A spare glass section is included in the box.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eWhat E-Liquid to Use\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eFor the 1.6Ω MTL coil, \u003ca title=\"50\/50 VG\/PG E-liquids\" href=\"https:\/\/piratevapes.co.uk\/collections\/50-50-e-liquids\" target=\"_blank\"\u003e\u003cstrong\u003e50\/50 VG\/PG E-liquids\u003c\/strong\u003e \u003c\/a\u003eor higher-PG blends work best. Nic salts also work well with this coil, up to 20mg. For the 0.48Ω Plex3D mesh coil: high-VG e-liquids (60\/40 or thicker). Stick to freebase nicotine at 6mg or lower with this coil. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003e\u003cstrong\u003eFor the other Z coils (0.8Ω, 1.0Ω, 1.2Ω): \u003c\/strong\u003e50\/50 e-liquids. For the lower-resistance\u003cstrong\u003e Z coils (0.3Ω, 0.5Ω\u003c\/strong\u003e): high-VG e-liquids, 6mg or lower. Browse our e-liquid range at \u003cstrong\u003ePirate Vapes\u003c\/strong\u003e for 50\/50 liquids and shortfills that pair well with the Zlide.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eHow to Set Up the Innokin Zlide\u003c\/span\u003e\u003c\/h2\u003e\n\u003col\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eUnscrew the tank base to ensure the pre-installed 0.48Ω mesh coil is screwed firmly into place.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eAdd 3–4 drops of e-liquid directly onto the exposed cotton openings on the side of the coil.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eReassemble the base securely and screw the tank onto your mod’s 510 connection.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003ePull the removable mouthpiece straight up to disengage the child-proof lock mechanism.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eSlide the top cap back to reveal the port, fill the 2ml tank, slide it shut, and reinsert it. Let the tank sit completely still so the dense cotton inside the Z-coil saturates fully.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eAdjust your mod's power (e.g., 10–15W for the spare 1.6Ω coil), dial in the bottom airflow ring, and enjoy.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eWhat’s in the Box\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003e1 x Innokin Zlide Vape Tank\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003e1 x Plex3D 0.48Ω Kanthal Mesh Coil (pre-installed)\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003e1 x 1.6Ω Kanthal Coil\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003e2 x Mouthpieces\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003e1 x Replacement Pyrex Glass Section\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003e1 x Replacement Silicone Seal\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003e1 x Pack of Replacement O-Rings\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003e1 x User Manual (with QR code for tutorial videos)\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eCompatibility\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe Innokin Zlide uses a standard 510 threaded connection. It fits the vast majority of vape mods and pen-style devices. The 22mm diameter means it sits flush on slim mods like the Innokin Coolfire Z50, Coolfire Z60, Kroma-R, and Adept without overhang. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe tank uses Innokin Z coils (Zenith coils). Not Innokin T18 coils, not Innokin EQ coils. Make sure you order the correct coils when restocking. Pirate Vapes stocks the Zlide tank and \u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/innokin-z-coils\" title=\"Innokin Z Replacement Coils\" target=\"_blank\"\u003e\u003cstrong\u003eInnokin Z Replacement Coils\u003c\/strong\u003e \u003c\/a\u003etogether in our Innokin range.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eAbout Innokin\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eInnokin has been making vape hardware since 2011. The\u003cstrong\u003e Endura T18 \u003c\/strong\u003ewas one of the first widely recommended starter kits in the UK, and the\u003cstrong\u003e Zenith tank \u003c\/strong\u003ebecame a benchmark for \u003cstrong\u003eMTL vaping\u003c\/strong\u003e. The Zlide carries that same design philosophy: simple to use, reliable, and focused on flavour. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eIt was built as a more affordable option alongside the Zenith, sharing the same\u003cstrong\u003e Z coil system\u003c\/strong\u003e while dropping the liquid shut-off valve to reduce cost. For an MTL vaper who wants a proven tank with a wide coil selection and a clean coil-swap system, it is one of the strongest options in the\u003ca title=\"Innokin Range\" href=\"https:\/\/piratevapes.co.uk\/collections\/innokin-vapes\" target=\"_blank\"\u003e\u003cstrong\u003e Innokin Range\u003c\/strong\u003e\u003c\/a\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eStock Up and Save\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe tank ships with two coils, but they will not last forever. Having a pack of\u003cstrong\u003e Innokin Z coils\u003c\/strong\u003e ready means you are never stuck on a burnt coil with a tank you cannot use. Add a bottle of 5\u003cstrong\u003e0\/50\u003c\/strong\u003e or a\u003cstrong\u003e nic salt \u003c\/strong\u003ealongside the coils and your order is sorted. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003ePirate Vapes sends everything in plain packaging, with tracked delivery to your door, age-verified checkout, and 18+ delivery. Crew Rewards points go on every order. If you want coils arriving without thinking about it, set up The Crow’s Nest at \u003cstrong\u003ePirate Vapes\u003c\/strong\u003e, and they come on repeat with a saving.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eConclusion\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003e22mm MTL tank with child-proof sliding top fill. 2ml capacity. Stainless steel and Pyrex glass. Compatible with the full \u003cstrong\u003eInnokin Z coil range\u003c\/strong\u003e. Two coils included: 0.48Ω Plex3D mesh (pre-installed) and 1.6Ω Kanthal. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eScrew-in coil changes without draining the tank. Adjustable airflow. 510 connection. Available in five colours. Designed with\u003cstrong\u003e Phil Busardo\u003c\/strong\u003e and \u003cstrong\u003eDimitris Agrafiotis\u003c\/strong\u003e. Grab one from \u003cstrong\u003ePirate Vapes\u003c\/strong\u003e with tracked, age-verified UK delivery.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eFAQs\u003c\/span\u003e\u003c\/h2\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eWhat is the e-liquid capacity?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003e2ml (TPD compliant).\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eWhich coils does it use?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eInnokin Z coils (Zenith coils). The full range is compatible: 0.3Ω, 0.48Ω, 0.5Ω, 0.8Ω, 1.0Ω, 1.2Ω, and 1.6Ω. Two coils ship in the box.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eCan I use nic salts in the Zlide?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eYes. Nic salts work well with the higher-resistance coils (0.8Ω, 1.0Ω, 1.2Ω, 1.6Ω). Do not use nic salts with the lower-resistance coils (0.3Ω, 0.48Ω, 0.5Ω).\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eWill it fit my mod?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eIf your mod has a 510 connection, it will work. The 22mm diameter fits flush on most slim mods and pen-style devices.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eIs this an MTL or DTL tank?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003ePrimarily MTL. The 0.48Ω mesh coil with the airflow opened gives a restricted DTL draw, but the tank is designed and optimised for mouth-to-lung vaping.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eIs the top fill child-proof?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eYes. The mouthpiece must be removed before the top cap slides open. With the mouthpiece in place, the cap is locked.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eCan I change the coil without emptying the tank?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eYes. The coil screws in from the base. You can swap coils without opening the top or draining e-liquid.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eWhat colours are available?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eBlack, Silver\/Stainless Steel, Gunmetal, Blue, and Coral Pink.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eIs a spare glass included?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eYes. A replacement Pyrex glass section, silicone seal, and O-rings are all included in the box.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eDoes Pirate Vapes stock the replacement coils?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eYes. Innokin Z coils are in our Innokin range at Pirate Vapes.\u003c\/span\u003e\u003c\/p\u003e","brand":"Innokin","offers":[{"title":"Black","offer_id":52537430769946,"sku":null,"price":14.99,"currency_code":"GBP","in_stock":true},{"title":"Silver","offer_id":52537430802714,"sku":null,"price":14.99,"currency_code":"GBP","in_stock":true},{"title":"Gunmetal","offer_id":52537430835482,"sku":null,"price":14.99,"currency_code":"GBP","in_stock":true},{"title":"Blue","offer_id":52537430868250,"sku":null,"price":14.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0995\/5675\/3690\/files\/Innokin_Zlide_Replacement_Tank.jpg?v=1784293932"},{"product_id":"aspire-nautilus-2-tank","title":"Aspire Nautilus 2 Tank","description":"\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eAspire Nautilus 2 Tank\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe tank that defined \u003ca title=\"Mouth-To-Lung Vaping\" href=\"https:\/\/piratevapes.co.uk\/collections\/mtl-vape-kits\" target=\"_blank\"\u003e\u003cstrong\u003eMouth-To-Lung Vaping\u003c\/strong\u003e\u003c\/a\u003e, updated. \u003cstrong\u003e22mm diameter, 2ml capacity\u003c\/strong\u003e, \u003cstrong\u003estainless steel \u003c\/strong\u003eand Pyrex glass construction, bottom adjustable airflow, and a shorter chimney designed to get flavour to the drip tip faster. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe \u003cstrong\u003eNautilus 2\u003c\/strong\u003e ships with a \u003cstrong\u003e0.7Ω BVC coil\u003c\/strong\u003e (pre-installed, 18 to 23W) and a \u003cstrong\u003e1.8Ω BVC coil\u003c\/strong\u003e (10 to 14W), and it is compatible with the entire \u003cstrong\u003eAspire Nautilus BVC coil \u003c\/strong\u003erange. Top fill, 510 connection, and a draw that ex-smokers have trusted for years. \u003cstrong\u003ePirate Vapes\u003c\/strong\u003e ships the \u003cstrong\u003eNautilus 2 \u003c\/strong\u003etracked with age-verified UK delivery.\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eWhy do vapers choose this:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eCarries the legendary Nautilus name in a more compact design with improved airflow.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eCuts down vapor travel distance for noticeably sharper, richer flavor.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eUses classic Nautilus BVC coils, making it fully cross-compatible with other tanks in the Nautilus range.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eComes with a 0.7Ω coil (18–23W) for a warmer draw and a 1.8Ω coil (10–14W) for a tight, cigarette-style hit.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eShips with an extra Pyrex glass tube and a replacement drip tip right in the box.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eAvailable Colours\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003e#buttons\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eSilver\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eGunmetal\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eAspire Nautilus 2 Tank Features\u003c\/span\u003e\u003c\/h2\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eBVC Coil Technology\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eBVC stands for Bottom Vertical Coil. The coil sits vertically inside the tank with the wicking ports at the base, drawing e-liquid upward through the cotton. This vertical orientation produces a more consistent draw and more even heat distribution than horizontal coil designs. The \u003cstrong\u003eBVC coils\u003c\/strong\u003e are screw-in, which makes changing them quick and clean.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eBottom Adjustable Airflow\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe airflow control ring sits at the base of the tank. Rotate it to open or close the airflow. Fully closed gives a very tight, cigarette-like draw. Open it up for a slightly looser MTL inhale. The ring clicks into position and holds, so it does not shift during use or in your pocket.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eTop Fill System\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eUnscrew the top cap to access the fill port. The opening is wide enough for most standard e-liquid bottle nozzles. Fill around the central chimney, screw the cap back on, and the tank is sealed. Straightforward and clean.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eCompact 22mm Design\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eAt 22mm diameter and 53mm height, the Nautilus 2 sits flush on slim mods and pen-style devices without overhang. It is compact enough for daily carry without adding bulk to your setup.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eWhat E-Liquid to Use\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe Nautilus 2 is an MTL tank. It works best with \u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/high-vg-e-liquid\" title=\"50\/50 VG\/PG E-Liquids\" target=\"_blank\"\u003e\u003cstrong\u003e50\/50 VG\/PG E-Liquids\u003c\/strong\u003e\u003c\/a\u003e or higher-PG blends. Nic salts work well with both included coils, up to 20mg. For the 1.8Ω coil, higher-PG liquids at higher nicotine strengths (up to 18mg freebase or 20mg nic salt) give a cigarette-like experience. For the 0.7Ω coil, 50\/50 or slightly higher-VG blends at 6 to 12mg freebase work well. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eDo not put thick high-VG sub-ohm shortfills through this tank. The coils are not designed for it. Browse our e-liquid range at \u003cstrong\u003ePirate Vapes\u003c\/strong\u003e for \u003cstrong\u003e\u003ca title=\"50\/50 Liquids\" href=\"https:\/\/piratevapes.co.uk\/collections\/50-50-e-liquids\" target=\"_blank\"\u003e50\/50 Liquids\u003c\/a\u003e \u003c\/strong\u003eand nic salts that pair well with the Nautilus 2.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eHow to Set Up the Aspire Nautilus 2\u003c\/span\u003e\u003c\/h2\u003e\n\u003col\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eUnscrew the outer metal sleeve from the base hardware to expose the inner glass and coil deck.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eScrew your preferred Nautilus BVC coil (0.7Ω or 1.8Ω) clockwise directly into the threaded base until snug.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eDrip 2–3 drops of 50\/50 e-liquid or nic salt straight into the top center opening of the coil.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003ePour your e-liquid into the Pyrex glass cup, ensuring you keep the fluid level just below the top threads of the central chimney.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003ePlace the outer metal sleeve back over the glass, screw it down firmly to the base, and thread the tank onto your mod's 510 pin.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eLet the tank stand so the vertical BVC cotton core can fully pull in and absorb the liquid.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eAdjust your device to 10–14W (for the 1.8Ω coil) or 18–23W (for the 0.7Ω coil), rotate the bottom ring to select your airflow holes, and enjoy.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eWhat’s in the Box\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003e1 x Aspire Nautilus 2 MTL Vape Tank\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003e1 x 0.7Ω BVC Coil (pre-installed, 18–23W)\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003e1 x 1.8Ω BVC Coil (10–14W)\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003e1 x Extra Pyrex Glass Tube\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003e8 x O-Rings\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003e1 x User Manual\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003e1 x Warning Card\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003e1 x Extra Drip Tip\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eCompatibility\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe \u003cstrong\u003eAspire Nautilus 2\u003c\/strong\u003e uses a standard 510 threaded connection. It fits any mod with a 510 connector. The 22mm diameter means it sits flush on most slim mods and pen-style devices. The tank uses Aspire Nautilus BVC coils. These are the same coils used across the entire Nautilus range: \u003cstrong\u003eNautilus, Nautilus Mini, Nautilus X, and Nautilus 3\u003c\/strong\u003e. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eNot Aspire PockeX coils, not Aspire Odan coils, not Aspire K-series coils. Make sure you order the correct Nautilus BVC coils when restocking. \u003cstrong\u003ePirate Vapes\u003c\/strong\u003e stocks the Nautilus 2 tank and the \u003cstrong\u003eAspire Nautilus BVC replacement coils\u003c\/strong\u003e together in our Aspire range.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eAbout Aspire\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eAspire built its reputation on the Nautilus. When the original Nautilus launched, it set the standard for what an \u003ca title=\"MTL Tank\" href=\"https:\/\/piratevapes.co.uk\/collections\/mtl-tanks\" target=\"_blank\"\u003e\u003cstrong\u003eMTL Tank\u003c\/strong\u003e\u003c\/a\u003e should feel like, and it became one of the most widely recommended tanks for ex-smokers in the UK. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe Nautilus 2 is the compact, updated version: shorter chimney for better flavour, cleaner top-fill system, and the same BVC coil compatibility that connects it to the entire Nautilus family. For vapers who want a proven MTL tank with a track record that stretches back years, the Nautilus 2 remains a solid choice in the \u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/aspire-vapes\" title=\"Aspire Range\" target=\"_blank\"\u003e\u003cstrong\u003eAspire Range\u003c\/strong\u003e\u003c\/a\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eStock Up and Save\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe tank ships with two coils, but they will not last forever. Having a pack of \u003cstrong\u003eAspire Nautilus BVC replacement coils \u003c\/strong\u003eready means you are never stuck on a burnt coil with a tank you cannot use. Add a bottle of nic salt or a 50\/50 e-liquid alongside the coils, and your order is sorted. Same-day dispatch before 4 pm. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eEverything ships in plain packaging, tracked and age-verified. Crew Rewards points go on every order. If you want coils arriving without thinking about it, set up The Crow’s Nest at \u003cstrong\u003ePirate Vapes\u003c\/strong\u003e and they come on repeat with a saving.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eConclusion\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003e\u003cstrong\u003e22mm MTL tank\u003c\/strong\u003e from the \u003cstrong\u003eNautilus serie\u003c\/strong\u003es. 2ml capacity. Stainless steel and Pyrex glass. Shorter chimney for improved flavour. Bottom adjustable airflow. Top fill. Two BVC coils included: 0.7Ω at 18 to 23W and 1.8Ω at 10 to 14W. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eCompatible with the entire\u003cstrong\u003e Aspire Nautilus BVC coil \u003c\/strong\u003erange. 510 connection. Spare glass and spare drip tip in the box. Grab one from \u003ca href=\"https:\/\/piratevapes.co.uk\/\" target=\"_blank\" title=\"Pirate Vapes\" rel=\"noopener\"\u003e\u003cstrong\u003ePirate Vapes\u003c\/strong\u003e\u003c\/a\u003e with tracked, age-verified UK delivery.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eFAQs\u003c\/span\u003e\u003c\/h2\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eWhat is the e-liquid capacity?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003e2ml (TPD compliant).\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eWhich coils does it use?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eAspire Nautilus BVC coils. The full range is compatible, including all coils used across the Nautilus, Nautilus Mini, Nautilus X, and Nautilus 3 tanks. Two coils ship in the box.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eCan I use nic salts in the Nautilus 2?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eYes. Nic salts work well with both included coils, up to 20mg.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eWill it fit my mod?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eIf your mod has a 510 connection, it will work. The 22mm diameter sits flush on most slim mods and pen-style devices.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eWhat e-liquid should I use?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003e50\/50 VG\/PG or higher-PG blends for MTL. Nic salts up to 20mg. Do not use thick high-VG sub-ohm shortfills.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eIs a spare glass included?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eYes. An extra Pyrex glass tube, a spare drip tip, and eight O-rings are all in the box.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eWhat colours are available?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eSilver and Gunmetal at Pirate Vapes. Other retailers may stock additional colours.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eHow do I change the coil?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eUnscrew the base of the tank. Unscrew the old coil from the base. Screw the new coil in. Prime it with a few drops of e-liquid, fill the tank, and wait five minutes before vaping.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eIs this suitable for beginners?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eYes. The Nautilus 2 is one of the most recommended MTL tanks for ex-smokers and new vapers. It is simple to fill, easy to maintain, and the tight draw mimics a cigarette.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eDoes Pirate Vapes stock the replacement coils?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eYes. Aspire Nautilus BVC coils are in our Aspire range at Pirate Vapes.\u003c\/span\u003e\u003c\/p\u003e","brand":"Aspire","offers":[{"title":"Silver","offer_id":52537464783130,"sku":null,"price":17.99,"currency_code":"GBP","in_stock":true},{"title":"Gunmetal","offer_id":52537464815898,"sku":null,"price":17.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0995\/5675\/3690\/files\/Aspire_Nautilus_2_Tank.jpg?v=1784294854"},{"product_id":"innokin-zenith-ii-tank","title":"Innokin Zenith II Replacement Tank","description":"\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eInnokin Zenith II Replacement Tank\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eTwo coils in the box. Two drip tips. One tank that handles \u003cstrong\u003emouth-to-lung\u003c\/strong\u003e and \u003cstrong\u003erestricted direct lung vaping\u003c\/strong\u003e depending on how you set it up. The\u003cstrong\u003e Innokin Zenith II\u003c\/strong\u003e is a \u003c\/span\u003e\u003cspan\u003e26mm, 2ml top-fill tank\u003c\/span\u003e\u003cspan\u003e with bottom adjustable airflow, a twist-open top cap, and compatibility with every \u003cstrong\u003eZ Coil Innokin \u003c\/strong\u003ehas ever produced. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe \u003c\/span\u003e\u003cspan\u003e\u003cstrong\u003e0.8ohm Z Coil \u003c\/strong\u003eruns at 15 to 18W\u003c\/span\u003e\u003cspan\u003e for a tight MTL draw. The \u003c\/span\u003e\u003cspan\u003e\u003cstrong\u003e0.3ohm Z Coil\u003c\/strong\u003e runs at 30 to 40W\u003c\/span\u003e\u003cspan\u003e for warmer, cloudier RDL pulls. \u003cstrong\u003eReplaceable pyrex glass\u003c\/strong\u003e, stainless steel body, and a 510 thread that fits on practically anything. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003e\u003cstrong\u003eThree finishes in the store picker at Pirate Vapes:\u003c\/strong\u003e Silver, Black, and Gunmetal. If you have been looking for a proper\u003c\/span\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/mtl-tanks\"\u003e \u003c\/a\u003e\u003ca title=\"MTL Vape Tank\" href=\"https:\/\/piratevapes.co.uk\/collections\/mtl-tanks\" target=\"_blank\"\u003eMTL Vape Tank\u003c\/a\u003e\u003c\/strong\u003e\u003cspan\u003e\u003cstrong\u003e \u003c\/strong\u003ethat can also stretch into RDL territory without needing a second tank, this is one of the strongest options out there. Over 18s only.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eWhy vapers choose the Zenith II:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eEvery \u003cstrong\u003eZ Coil Innokin \u003c\/strong\u003emakes fits this tank\u003c\/span\u003e\u003cspan\u003e, not just the two in the box. That opens up resistances from 1.6ohm right down to 0.3ohm, which is a wider range than most tanks at this price point will ever give you.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eThe bottom airflow ring does genuine work\u003c\/span\u003e\u003cspan\u003e across \u003cstrong\u003eMTL \u003c\/strong\u003eand \u003cstrong\u003eRDL \u003c\/strong\u003epositions. This is not a tank where \"adjustable\" means two barely different settings. Tight cigarette draw to warm, open RDL with real steps between.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eTwist-top fill stays shut when you want it shut.\u003c\/span\u003e\u003cspan\u003e Innokin added a silicone seal and tightened the cap tolerance after complaints about the original Zenith's top cap rotating on its own and catching facial hair. Sorted.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eCracked glass is a spare part, not a death sentence.\u003c\/span\u003e\u003cspan\u003e Pop the old pyrex off, slide a new one on.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eTwo drip tips included\u003c\/span\u003e\u003cspan\u003e because the draw profile changes enough between MTL and RDL that you genuinely benefit from different bore sizes.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eInnokin Zenith II Features\u003c\/span\u003e\u003c\/h2\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eHonestly, the Airflow Range Is the Whole Point\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003ePlenty of tanks say they do MTL and RDL. Most of them give you a vaguely tight draw and a vaguely loose draw and call it versatility. The Zenith II actually commits. Innokin took the Zenith Pro's airflow system, refined the machining tolerances, and built a bottom ring that clicks through distinct positions from fully restricted to fully open. At the tight end, it pulls like a cigarette. At the loose end, the \u003c\/span\u003e\u003cspan\u003e0.3ohm coil at 30 to 40W\u003c\/span\u003e\u003cspan\u003e pushes warm, dense vapour with real body to it. Not a gimmick. Genuinely two usable styles from one piece of hardware.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eThat Top Cap Fix Was Overdue\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eHere is the thing about the original Zenith: brilliant tank, annoying top cap. It would rotate in your pocket, catch on stubble, and occasionally pop open just enough to weep liquid onto your mod. Innokin knew about it. The Zenith II tightens the rotation tolerance and adds a \u003c\/span\u003e\u003cspan\u003esilicone gasket\u003c\/span\u003e\u003cspan\u003e around the fill port opening. Now the cap twists open smoothly when you actually want to refill and stays locked when you do not. Should this have happened sooner? Probably. Does it fix the problem? Completely.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eReplaceable Glass Changes the Maths\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eTanks break. Drop one on a tile floor and the pyrex is finished. On the original Zenith, that meant buying a whole new tank because the glass was bonded into the assembly around the auto-liquid shut-off valve. The Zenith II makes the \u003c\/span\u003e\u003cspan\u003epyrex cylinder user-removable\u003c\/span\u003e\u003cspan\u003e, which means a replacement glass from the\u003c\/span\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/replacement-tank-glass\"\u003e \u003c\/a\u003e\u003ca title=\"Spare Glass Section\" href=\"https:\/\/piratevapes.co.uk\/collections\/replacement-tank-glass\" target=\"_blank\"\u003eSpare Glass Section\u003c\/a\u003e\u003c\/strong\u003e\u003cspan\u003e costs a fraction of what a new tank would. Keep a spare in your drawer. You will be glad you did when gravity inevitably wins.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eZ Coil Compatibility Goes Deep\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe two coils in the box are the starting point. The full Innokin\u003c\/span\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/vape-coils\"\u003e \u003c\/a\u003e\u003ca title=\"Z Coil Range\" href=\"https:\/\/piratevapes.co.uk\/collections\/innokin-z-coils\" target=\"_blank\"\u003eZ Coil Range\u003c\/a\u003e\u003c\/strong\u003e\u003cspan\u003e includes 0.3ohm, 0.5ohm, 0.65ohm, 0.8ohm, 1.0ohm, 1.2ohm, and 1.6ohm options. Want to run tight MTL with\u003c\/span\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/20mg-nic-salt\"\u003e \u003c\/a\u003e\u003ca title=\"20mg Nic Salts\" href=\"https:\/\/piratevapes.co.uk\/collections\/20mg-nic-salt\" target=\"_blank\"\u003e20mg Nic Salts\u003c\/a\u003e\u003c\/strong\u003e\u003cspan\u003e? Fit a 1.6ohm. Want warm RDL clouds with \u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/70-30-shortfills\"\u003e\u003cstrong\u003e70\/30\u003c\/strong\u003e\u003c\/a\u003e\u003c\/span\u003e\u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/70-30-shortfills\" target=\"_blank\" title=\"70\/30 E-Liquid\" rel=\"noopener\"\u003e\u003cstrong\u003e E-Liquid\u003c\/strong\u003e\u003c\/a\u003e\u003cspan\u003e at 3mg? The 0.3ohm handles it. That kind of flexibility from a single tank is rare, and Innokin has kept \u003cstrong\u003eZ Coils \u003c\/strong\u003ein production long enough that supply is not going to be a problem anytime soon.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eNo More Pedestal\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eSmall detail, but it matters visually. The original Zenith had a raised riser section between the drip tip and the tank body. Functional, yes. But it made the whole thing look taller than it needed to and made aftermarket 510 drip tips sit awkwardly high. Gone on the Zenith II. The \u003c\/span\u003e\u003cspan\u003e510 drip tip\u003c\/span\u003e\u003cspan\u003e now sits flush against the top cap. Cleaner proportions. Looks like it was designed in 2026 rather than 2018. Any standard 510 mouthpiece you own will fit and look right.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eInnokin Zenith II Colours\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThree finishes available. All use the same stainless steel and pyrex construction underneath.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003e#buttons\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\"\u003eSilver\u003c\/li\u003e\n\u003cli dir=\"ltr\"\u003eBlack\u003c\/li\u003e\n\u003cli dir=\"ltr\"\u003eGunmetal\u003cspan\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eHow to Set Up the Innokin Zenith II\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eQuick process. Under two minutes if you have done it before.\u003c\/span\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eUnscrew the base\u003c\/span\u003e\u003cspan\u003e from the glass and top cap assembly. Set the top section aside.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003ePick your coil. The \u003c\/span\u003e\u003cspan\u003e0.8ohm\u003c\/span\u003e\u003cspan\u003e for MTL or the \u003c\/span\u003e\u003cspan\u003e0.3ohm\u003c\/span\u003e\u003cspan\u003e for RDL. Press it firmly into the base until it clicks and seats flush. No threading needed. Just push.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eDrip four or five drops of e-liquid\u003c\/span\u003e\u003cspan\u003e directly onto the cotton visible through the side wicking ports. Turn the coil as you go so every port gets wet. Do not rush this step.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eScrew the base back onto the glass. Twist the top cap open, fill to just below the max line, and \u003c\/span\u003e\u003cspan\u003eclose the cap until the silicone seal compresses flat\u003c\/span\u003e\u003cspan\u003e. You will feel it seat.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eStand the tank upright and \u003c\/span\u003e\u003cspan\u003ewait a full five minutes\u003c\/span\u003e\u003cspan\u003e. Seriously. The Z Coil wicking material is dense and needs time to pull liquid through from every angle. Firing early chars the cotton and ruins the coil on the first draw.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eAttach to your mod. \u003c\/span\u003e\u003cspan\u003eStart low\u003c\/span\u003e\u003cspan\u003e: 15W for the 0.8ohm, 30W for the 0.3ohm. Work upward until the warmth and flavour hit where you want them.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eWhat's in the Innokin Zenith II Box\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eOne Zenith II tank. \u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eOne \u003c\/span\u003e\u003cspan\u003e0.8ohm Z Coil\u003c\/span\u003e\u003cspan\u003e for MTL at 15 to 18W. \u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eOne \u003c\/span\u003e\u003cspan\u003e0.3ohm Z Coil\u003c\/span\u003e\u003cspan\u003e for RDL at 30 to 40W. \u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eA spare RDL drip tip with a wider bore than the installed MTL one. \u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eA bag of spare O-rings. \u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eA quick start guide.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eNo e-liquid. No mod. No battery. Tank only. You will need a 510-threaded regulated mod that can run between 15W and 40W, and your choice of liquid to get started.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eBuilt for Innokin Mods, Works on Everything Else Too\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eStandard \u003c\/span\u003e\u003cspan\u003e510 thread\u003c\/span\u003e\u003cspan\u003e. Fits any 510 mod, battery, or box device. \u003cstrong\u003eInnokin \u003c\/strong\u003epaired it with their \u003cstrong\u003eCoolfire Z50 \u003c\/strong\u003eand \u003cstrong\u003eCoolfire Z80 kits\u003c\/strong\u003e, and those are solid combinations. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eBut it works just as well on \u003cstrong\u003eVaporesso, Voopoo, Geekvape,\u003c\/strong\u003e or any other 510 mod you already own. At 26mm wide, it sits flush on most mid-size box mods with no overhang.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eWattage requirements depend on which coil you install. The \u003c\/span\u003e\u003cspan\u003e0.8ohm\u003c\/span\u003e\u003cspan\u003e needs 15 to 18W minimum. The \u003c\/span\u003e\u003cspan\u003e0.3ohm\u003c\/span\u003e\u003cspan\u003e needs 30 to 40W. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eNot suitable for mechanical mods or unregulated devices. Check out the full\u003c\/span\u003e\u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/innokin-vapes\" target=\"_blank\" title=\" Innokin Range \" rel=\"noopener\"\u003e\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eInnokin Range\u003c\/strong\u003e\u003c\/a\u003e\u003cspan\u003e\u003cstrong\u003e \u003c\/strong\u003efor kits that pair naturally with this tank.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eAbout Innokin\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe \u003cstrong\u003eZ Coil\u003c\/strong\u003e is \u003cstrong\u003eInnokin's \u003c\/strong\u003emost commercially important design decision. One coil platform that runs across the \u003cstrong\u003eZenith, Zenith Pro, Zenith II, Zlide, Go Z, Coolfire Mini\u003c\/strong\u003e, and half a dozen pod kits. Buy into any one of those devices, and you have access to coils that fit across the entire ecosystem. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThat is not an accident. \u003cstrong\u003eInnokin \u003c\/strong\u003ehas been building hardware around long-term coil continuity since their Shenzhen manufacturing operation started in 2011, and they have stuck with it while other brands cycle through incompatible coil formats every eighteen months. The \u003cstrong\u003eZenith II \u003c\/strong\u003eis the latest expression of that philosophy: a better tank, the same coils. If you have\u003cstrong\u003e Z Coils\u003c\/strong\u003e in a drawer right now, they already fit.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eStock Up and Save\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eTwo coils in the box is a decent start, but they will not last forever. A five-pack of \u003cstrong\u003eZ Coils\u003c\/strong\u003e alongside the tank keeps you covered for weeks and brings the per-coil price down noticeably. Keep a spare pyrex tube in the drawer while you are at it. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eEvery order from \u003c\/span\u003e\u003cstrong\u003ePirate Vapes\u003c\/strong\u003e\u003cspan\u003e ships same day before 4 pm in cushioned, secure packaging. TPD compliant stock, age-verified checkout, over-18s only. Orders over £25 ship free with Free Pirate Post.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eConclusion\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eTanks that genuinely do two things well are hard to find. The\u003cstrong\u003e Zenith II \u003c\/strong\u003emanages it. Tight \u003cstrong\u003eMTL \u003c\/strong\u003edraws from the\u003cstrong\u003e 0.8ohm coil\u003c\/strong\u003e, warm \u003cstrong\u003eRDL clouds \u003c\/strong\u003efrom the 0.3ohm, with an airflow ring that gives you real steps between the two rather than a binary switch. Replaceable glass, improved top cap seal, and full backward compatibility with every\u003cstrong\u003e Z Coil\u003c\/strong\u003e in the catalogue.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eInnokin fixed the things that needed fixing from the original Zenith and kept everything that worked. Not a radical redesign. Just a better version of a tank that was already good. Pick one up alongside the full range of\u003c\/span\u003e\u003cspan\u003e\u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/vape-accessories\"\u003e \u003c\/a\u003e\u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/vape-accessories\" target=\"_blank\" title=\"Vape Accessories\" rel=\"noopener\"\u003e\u003cstrong\u003eV\u003c\/strong\u003e\u003c\/a\u003e\u003c\/span\u003e\u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/vape-accessories\" target=\"_blank\" title=\"Vape Accessories\" rel=\"noopener\"\u003e\u003cstrong\u003eape Accessories\u003c\/strong\u003e\u003c\/a\u003e\u003cspan\u003e\u003cstrong\u003e \u003c\/strong\u003eat\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003ePirate Vapes\u003c\/strong\u003e\u003cspan\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eFAQs\u003c\/span\u003e\u003c\/h2\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eWhat coils fit the Zenith II?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eAll Innokin Z Coils. Every single one. The box includes a \u003c\/span\u003e\u003cspan\u003e0.8ohm\u003c\/span\u003e\u003cspan\u003e and a \u003c\/span\u003e\u003cspan\u003e0.3ohm\u003c\/span\u003e\u003cspan\u003e, but the 0.5, 0.65, 1.0, 1.2, and 1.6ohm options all work too.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eCan it do proper DTL?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eNo. RDL is the loosest it goes. If you want wide-open sub-ohm clouds, this is not the tank for that. What it does is a warmer, flavour-rich restricted draw at \u003c\/span\u003e\u003cspan\u003e30 to 40W\u003c\/span\u003e\u003cspan\u003e through the 0.3ohm coil, which is enough for most people who are not chasing competitive cloud volume.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eWhat e-liquid ratio works best?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eDepends on the coil. 50\/50 nic salts at 10mg or 20mg through the \u003c\/span\u003e\u003cspan\u003e0.8ohm\u003c\/span\u003e\u003cspan\u003e. Freebase at 3 to 6mg in 50\/50 or 70\/30 through the \u003c\/span\u003e\u003cspan\u003e0.3ohm\u003c\/span\u003e\u003cspan\u003e. Anything thicker than 70\/30 might struggle to wick in the higher-resistance coils.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eIs the glass really replaceable?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eYes. Properly removable. Twist the base off, slide the pyrex cylinder down, put a new one on. Takes about thirty seconds.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eHow long do Z Coils last?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eRoughly one to three weeks depending on how much you vape and how sweet your liquid is. Heavy use with dessert flavours will gunk a coil faster than moderate use with a clean fruit or menthol. Not bad for the price.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eBetter than the original Zenith?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eIn every measurable way. Better airflow range, replaceable glass, fixed top cap, cleaner design. Same coils.\u003c\/span\u003e\u003c\/p\u003e","brand":"Innokin","offers":[{"title":"Silver","offer_id":52543051858202,"sku":null,"price":16.99,"currency_code":"GBP","in_stock":true},{"title":"Black","offer_id":52543051890970,"sku":null,"price":16.99,"currency_code":"GBP","in_stock":true},{"title":"Gunmetal","offer_id":52543051923738,"sku":null,"price":16.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0995\/5675\/3690\/files\/Innokin_Zenith_II_Replacement_Tank.jpg?v=1784350310"},{"product_id":"innokin-go-z-tank","title":"Innokin GO Z Tank","description":"\u003ch2 dir=\"ltr\"\u003eInnokin GO Z Tank\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eA \u003c\/span\u003e\u003cstrong\u003e2ml MTL tank\u003c\/strong\u003e\u003cspan\u003e for under a fiver. The \u003cstrong\u003eInnokin GO Z\u003c\/strong\u003e is built from food-grade \u003c\/span\u003e\u003cstrong\u003ePCTG plastic\u003c\/strong\u003e\u003cspan\u003e, comes with a \u003c\/span\u003e\u003cstrong\u003e1.6ohm Z coil\u003c\/strong\u003e\u003cspan\u003e\u003cstrong\u003e pre-installed\u003c\/strong\u003e, and fits any mod or battery with a standard \u003c\/span\u003e\u003cspan\u003e510 thread\u003c\/span\u003e\u003cspan\u003e. Sliding top-fill, bottom-adjustable airflow, and a \u003c\/span\u003e\u003cspan\u003e20mm diameter\u003c\/span\u003e\u003cspan\u003e that sits flush on pen-style devices without any overhang. The coil is press-fit, not screwed, so swaps take seconds. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eCompatible with \u003cstrong\u003eInnokin's full Z coil range\u003c\/strong\u003e, which means you can run anything from a \u003c\/span\u003e\u003cspan\u003e0.5ohm\u003c\/span\u003e\u003cspan\u003e restricted lung draw to a \u003c\/span\u003e\u003cspan\u003e1.6ohm\u003c\/span\u003e\u003cspan\u003e tight cigarette-style pull depending on what you pair it with. Four colours in the store picker. Over 18s only. Browse the full range of\u003c\/span\u003e\u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/mtl-tanks\"\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/a\u003e\u003ca title=\"MTL Tanks\" href=\"https:\/\/piratevapes.co.uk\/collections\/mtl-tanks\" target=\"_blank\"\u003e\u003cstrong\u003eMTL Tanks\u003c\/strong\u003e\u003c\/a\u003e\u003cspan\u003e at \u003cstrong\u003ePirate Vapes\u003c\/strong\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eWhy vapers choose the GO Z Tank:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eZ coil cross-compatibility\u003c\/span\u003e\u003cspan\u003e means you are not locked into one resistance. The entire Innokin Z coil family fits this tank, from the 0.5ohm mesh right through to the 1.6ohm standard head, and replacements are widely available across UK retailers\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003ePCTG plastic construction\u003c\/span\u003e\u003cspan\u003e handles drops and knocks that would crack a glass tank. Lighter too, which matters on a pen-style battery where weight balance is everything\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eSliding top-fill\u003c\/span\u003e\u003cspan\u003e is faster than unscrewing a cap. Push the top open, fill along the inner wall, slide it shut. No leaking from misaligned threads\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eUnder £5 retail.\u003c\/span\u003e\u003cspan\u003e Genuinely hard to beat at this price point\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003ePress-fit coil swaps\u003c\/span\u003e\u003cspan\u003e take less than ten seconds. No threading, no alignment issues, no tools\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eGO Z Tank Features\u003c\/span\u003e\u003c\/h2\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eWhy PCTG Instead of Glass?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eDrop a glass tank on a pavement, and you are buying a new one. The GO Z uses \u003c\/span\u003e\u003cspan\u003efood-grade PCTG\u003c\/span\u003e\u003cspan\u003e, a transparent thermoplastic that absorbs impact without shattering. It is lighter than glass, which keeps the centre of gravity low on pen-style mods. The trade-off is that certain e-liquids containing citrus or cinnamon compounds can cloud PCTG over time. Stick to standard fruit, menthol, or tobacco profiles and the tank stays clear. Fair trade for something this durable.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eThat Sliding Top-Fill, Though\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eMost budget\u003c\/span\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/vape-tanks\"\u003e \u003c\/a\u003e\u003ca title=\"Vape Tanks\" href=\"https:\/\/piratevapes.co.uk\/collections\/vape-tanks\" target=\"_blank\"\u003eVape Tanks\u003c\/a\u003e\u003c\/strong\u003e\u003cspan\u003e\u003cstrong\u003e \u003c\/strong\u003eat this price point use screw-cap filling. The \u003cstrong\u003eGO Z \u003c\/strong\u003ehas a sliding mechanism with a silicone seal underneath. Push the cap sideways, and the fill port opens. No unscrewing, no cross-threading, no cap to fumble with in one hand. The seal keeps liquid locked in when closed. Simple engineering, well executed.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eOne Coil Platform, Dozens of Options\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe \u003cstrong\u003eZ coil range \u003c\/strong\u003eis one of \u003cstrong\u003eInnokin's longest-running coil\u003c\/strong\u003e platforms. The GO Z ships with the \u003c\/span\u003e\u003cspan\u003e1.6ohm\u003c\/span\u003e\u003cspan\u003e head, but the press-fit base accepts every Z coil Innokin makes. The \u003c\/span\u003e\u003cspan\u003e1.2ohm\u003c\/span\u003e\u003cspan\u003e gives a slightly warmer draw. The \u003c\/span\u003e\u003cspan\u003e0.8ohm\u003c\/span\u003e\u003cspan\u003e opens things up for a looser MTL pull. The \u003c\/span\u003e\u003cspan\u003e0.5ohm\u003c\/span\u003e\u003cspan\u003e pushes into restricted direct lung territory if your mod has the wattage. One tank, multiple vaping styles, and you only need to swap the coil. Browse available\u003c\/span\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/vape-coils\"\u003e \u003c\/a\u003e\u003ca title=\"Vape Coils\" href=\"https:\/\/piratevapes.co.uk\/collections\/vape-coils\" target=\"_blank\"\u003eVape Coils\u003c\/a\u003e\u003c\/strong\u003e\u003cspan\u003e\u003cstrong\u003e \u003c\/strong\u003eto find your preferred resistance.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eBottom Airflow That Actually Adjusts\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe airflow ring sits at the base of the tank and rotates smoothly between fully closed and fully open. For a tight cigarette-style draw, close it down to a sliver. For a slightly airier MTL pull, open it a quarter turn. The adjustment is precise enough to notice the difference between settings, which is not always the case on budget tanks.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003e510 Thread Fits Almost Everything\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eStandard \u003c\/span\u003e\u003cspan\u003e510 connection\u003c\/span\u003e\u003cspan\u003e. The GO Z screws onto any mod, box mod, or pen battery that uses a 510 thread, which is the vast majority of devices on the market. At \u003c\/span\u003e\u003cspan\u003e20mm\u003c\/span\u003e\u003cspan\u003e across, it sits flush on pen batteries and does not overhang on compact mods. If you already own a mod and just need a reliable \u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/mtl-tanks\" target=\"_blank\" title=\" MTL Tank \" rel=\"noopener\"\u003e\u003cstrong\u003eMTL Tank\u003c\/strong\u003e \u003c\/a\u003efor\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003enic salts\u003c\/span\u003e\u003cspan\u003e, this is one of the most affordable ways to get there.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eGO Z Tank Colours\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eFour finishes, all using the same transparent PCTG body with different tinting.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e#buttons\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv class=\"qMYqUG_convSearchResultHighlightRoot\"\u003e\n\u003cdiv data-is-intersecting=\"true\" data-turn-id-container=\"request-6a50af45-65cc-83e8-857a-c714e35e28c9-0\" class=\"\"\u003e\n\u003csection data-turn=\"assistant\" data-testid=\"conversation-turn-318\" data-turn-id-container=\"request-6a50af45-65cc-83e8-857a-c714e35e28c9-0\" data-turn-id=\"request-6a50af45-65cc-83e8-857a-c714e35e28c9-0\" dir=\"auto\" class=\"text-token-text-primary w-full focus:outline-none has-data-writing-block:pointer-events-none [\u0026amp;:has([data-writing-block])\u0026gt;*]:pointer-events-auto R6Vx5W_threadScrollVars scroll-mb-[calc(var(--scroll-root-safe-area-inset-bottom,0px)+var(--thread-response-height))] scroll-mt-[calc(var(--header-height)+min(200px,max(70px,20svh)))]\"\u003e\n\u003cdiv class=\"text-base my-auto mx-auto pb-15 [--thread-content-margin:var(--thread-content-margin-xs,calc(var(--spacing)*4))] @w-sm\/main:[--thread-content-margin:var(--thread-content-margin-sm,calc(var(--spacing)*6))] @w-lg\/main:[--thread-content-margin:var(--thread-content-margin-lg,calc(var(--spacing)*16))] px-(--thread-content-margin)\"\u003e\n\u003cdiv class=\"[--thread-content-max-width:40rem] @w-lg\/main:[--thread-content-max-width:48rem] mx-auto max-w-(--thread-content-max-width) flex-1 group\/turn-messages focus-visible:outline-hidden relative flex w-full min-w-0 flex-col agent-turn\" data-conversation-screenshot-content=\"\"\u003e\n\u003cdiv class=\"flex max-w-full flex-col gap-4 grow\"\u003e\n\u003cdiv data-turn-start-message=\"true\" class=\"min-h-8 text-message relative flex w-full flex-col items-end gap-2 text-start break-words whitespace-normal outline-none keyboard-focused:focus-ring [.text-message+\u0026amp;]:mt-1\" data-message-model-slug=\"gpt-5-5\" dir=\"auto\" data-message-id=\"e59e4348-00e9-4356-811c-2953a8f97188\" data-message-author-role=\"assistant\" tabindex=\"0\"\u003e\n\u003cdiv class=\"flex w-full flex-col gap-1 empty:hidden\"\u003e\n\u003cdiv class=\"markdown prose dark:prose-invert wrap-break-word w-full dark markdown-new-styling\"\u003e\n\u003cul data-is-only-node=\"\" data-is-last-node=\"\" data-end=\"103\" data-start=\"68\"\u003e\n\u003cli data-end=\"77\" data-start=\"68\" data-section-id=\"8yangx\"\u003eClear\u003cspan class=\"PDq2pG_selectionAnchor\" aria-hidden=\"true\"\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"87\" data-start=\"78\" data-section-id=\"t3dqof\"\u003eBlack\u003c\/li\u003e\n\u003cli data-end=\"96\" data-start=\"88\" data-section-id=\"1vm4tva\"\u003eBlue\u003c\/li\u003e\n\u003cli data-is-last-node=\"\" data-end=\"103\" data-start=\"97\" data-section-id=\"1j49pec\"\u003ePink\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/section\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eHow to Set Up the GO Z Tank\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eQuick fill, quick prime. Two minutes from box to first draw.\u003c\/span\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eRemove the tank from packaging\u003c\/span\u003e\u003cspan\u003e and confirm the \u003c\/span\u003e\u003cspan\u003e1.6ohm Z coil\u003c\/span\u003e\u003cspan\u003e is already press-fitted into the base. If you are installing a different coil, twist off the base, pull the old coil out, and push the new one firmly into place until it clicks.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003ePlace \u003c\/span\u003e\u003cspan\u003ethree to four drops of e-liquid\u003c\/span\u003e\u003cspan\u003e directly onto the cotton visible through the coil's wicking ports. Spread them across each port so the cotton is visibly damp on all sides.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eSlide the top cap open and fill with your chosen e-liquid. Tilt the nozzle against the \u003c\/span\u003e\u003cspan\u003einner wall\u003c\/span\u003e\u003cspan\u003e of the tank and fill to just below the top of the centre post. Close the cap firmly.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eScrew the tank onto your mod or battery via the \u003c\/span\u003e\u003cspan\u003e510 thread\u003c\/span\u003e\u003cspan\u003e. Finger-tight. Do not overtighten.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eSet the tank upright and wait a full seven minutes\u003c\/span\u003e\u003cspan\u003e before your first draw. The Kanthal coil needs time to pull liquid through the organic cotton from every angle. Rushing this step chars the cotton permanently.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eStart at \u003c\/span\u003e\u003cspan\u003elow wattage\u003c\/span\u003e\u003cspan\u003e, around \u003c\/span\u003e\u003cspan\u003e10 to 14W\u003c\/span\u003e\u003cspan\u003e for the 1.6ohm coil. Take a few gentle primer puffs, then adjust the airflow to your preference.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eWhat's in the GO Z Tank Box\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eOne Innokin GO Z tank in your selected colour with a \u003c\/span\u003e\u003cspan\u003e1.6ohm Z coil\u003c\/span\u003e\u003cspan\u003e pre-installed. \u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eOne quick start guide. \u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eNo e-liquid, no mod, no battery, no spare coil in the box. If you want a backup coil ready for when the first one fades, pick one up separately. The Z coil range is sold in packs of five.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eThe MTL Tank for Any 510 Mod in Your Collection\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe GO Z is designed as a standalone tank, not a kit-exclusive component. That means it works on virtually any device with a \u003c\/span\u003e\u003cspan\u003e510 connection\u003c\/span\u003e\u003cspan\u003e. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003ePen batteries from the Innokin GO S, CoolFire Z50, and CoolFire Z80 are natural pairings, but it fits equally well on box mods from Vaporesso, Voopoo, Geekvape, and others. The \u003c\/span\u003e\u003cspan\u003e20mm diameter\u003c\/span\u003e\u003cspan\u003e avoids overhang on most compact mods.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eWhat it does not fit: devices that use proprietary pod connections instead of 510 threads. Pod kits from the XROS, Caliburn, and XLIM families use their own pod formats and will not accept a screw-on tank. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eIf you are on a pod system and want to explore tanks, you will need a mod with a 510 connection first. Check the\u003c\/span\u003e\u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/innokin-vapes\"\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/a\u003e\u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/innokin-vapes\" target=\"_blank\" title=\"Innokin Range\" rel=\"noopener\"\u003e\u003cstrong\u003eInnokin Range\u003c\/strong\u003e\u003c\/a\u003e\u003cspan\u003e for compatible devices.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eAbout Innokin\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe \u003cstrong\u003eZ coil platform \u003c\/strong\u003eis one of Innokin's most significant contributions to MTL vaping hardware. Originally launched as the \u003cstrong\u003eZenith coil\u003c\/strong\u003e series, it has since been rebranded to the Z coil family and spans eight resistance options across MTL and restricted direct lung styles. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe coils are cross-compatible across more than a dozen Innokin tanks and pods, including the \u003cstrong\u003eZenith, Zenith II, Zlide, Kroma-Z, and the GO Z itself\u003c\/strong\u003e. That kind of coil ecosystem longevity is rare. When you invest in the Z coil platform, you are investing in a system that Innokin has supported and expanded for years, not a dead-end proprietary format.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eStock Up and Save\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe GO Z comes with one coil fitted. One. At daily \u003cstrong\u003eMTL \u003c\/strong\u003euse, a\u003cstrong\u003e Z coil \u003c\/strong\u003elasts roughly one to two weeks depending on sweetener levels in your liquid. Picking up a five-pack of replacement Z coils alongside the tank means you are covered for over a month without reordering. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003ePair it with a few bottles of\u003c\/span\u003e\u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/50-50-e-liquids\"\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/a\u003e\u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/50-50-e-liquids\" target=\"_blank\" title=\"50\/50 E-Liquid\" rel=\"noopener\"\u003e\u003cstrong\u003e50\/50 E-Liquid\u003c\/strong\u003e\u003c\/a\u003e\u003cspan\u003e\u003cstrong\u003e,\u003c\/strong\u003e and you have a complete setup for well under £20. Every order from \u003c\/span\u003e\u003cspan\u003ePirate Vapes\u003c\/span\u003e\u003cspan\u003e ships the same day before 4 pm. TPD-compliant stock, age-verified checkout, over 18s only. Free Pirate Post on orders over £25.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eConclusion\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe \u003cstrong\u003eGO Z \u003c\/strong\u003eis not trying to be a premium sub-ohm tank. It is a simple, affordable, durable \u003cstrong\u003eMTL clearomiser \u003c\/strong\u003ethat does exactly what it needs to do: hold 2ml of liquid, deliver clean flavour through a proven coil platform, and screw onto any 510 mod you own. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe\u003cstrong\u003e PCTG body \u003c\/strong\u003ehandles daily wear, the sliding top-fill is faster than most tanks twice the price, and the \u003cstrong\u003eZ coil \u003c\/strong\u003ecross-compatibility gives you options well beyond the included 1.6ohm head. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eIf you want a reliable backup tank, a cheap \u003cstrong\u003eMTL option\u003c\/strong\u003e for nic salts, or a first tank to pair with a new mod, the GO Z covers all three. Browse more Innokin hardware and\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003evape accessories\u003c\/span\u003e\u003cspan\u003e at\u003c\/span\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/piratevapes.co.uk\"\u003e \u003c\/a\u003e\u003ca href=\"https:\/\/piratevapes.co.uk\" target=\"_blank\" title=\"Pirate Vapes\" rel=\"noopener\"\u003ePirate Vapes\u003c\/a\u003e\u003c\/strong\u003e\u003cspan\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eFAQs\u003c\/span\u003e\u003c\/h2\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eWhat coils fit the GO Z?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eAll Innokin Z (Zenith) series coils. That includes the \u003c\/span\u003e\u003cspan\u003e0.5ohm\u003c\/span\u003e\u003cspan\u003e, \u003c\/span\u003e\u003cspan\u003e0.8ohm\u003c\/span\u003e\u003cspan\u003e, \u003c\/span\u003e\u003cspan\u003e1.0ohm\u003c\/span\u003e\u003cspan\u003e, \u003c\/span\u003e\u003cspan\u003e1.2ohm\u003c\/span\u003e\u003cspan\u003e, and \u003c\/span\u003e\u003cspan\u003e1.6ohm\u003c\/span\u003e\u003cspan\u003e heads. The 1.6ohm comes pre-installed. The practical range for this tank is 0.5ohm to 1.6ohm.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eWhat e-liquid works best?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003e50\/50 VG\/PG or higher-PG blends. The wicking ports on the Z coils are sized for thinner liquids. Anything above 60% VG will struggle to wick properly and may produce dry hits, especially on the 1.6ohm.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eIs the GO Z glass or plastic?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003ePlastic. Food-grade \u003c\/span\u003e\u003cspan\u003ePCTG\u003c\/span\u003e\u003cspan\u003e, which is transparent and shatter-resistant. Avoid citrus or cinnamon e-liquids as they can cloud PCTG over time.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eDoes it fit my mod?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eIf your mod has a \u003c\/span\u003e\u003cspan\u003e510 thread\u003c\/span\u003e\u003cspan\u003e, yes. The GO Z is 20mm in diameter, so it sits flush on most pen-style devices and compact mods without overhang.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eHow often should I change the coil?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eEvery one to two weeks with daily use. Sweeter liquids shorten coil life because sugar residue caramelises on the cotton. When flavour drops, or you get a persistent burnt taste, swap it.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eDoes the GO Z come with a spare coil?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eNo. One \u003c\/span\u003e\u003cspan\u003e1.6ohm Z coil\u003c\/span\u003e\u003cspan\u003e pre-installed, no spare in the box. Z coils are sold separately in packs of five.\u003c\/span\u003e\u003c\/p\u003e","brand":"Innokin","offers":[{"title":"Clear","offer_id":52543135908122,"sku":null,"price":4.95,"currency_code":"GBP","in_stock":true},{"title":"Black","offer_id":52543135940890,"sku":null,"price":4.95,"currency_code":"GBP","in_stock":true},{"title":"Blue","offer_id":52543135973658,"sku":null,"price":4.95,"currency_code":"GBP","in_stock":true},{"title":"Pink","offer_id":52543136006426,"sku":null,"price":4.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0995\/5675\/3690\/files\/GO_Z_Tank_By_Innokin.jpg?v=1784350199"},{"product_id":"innokin-endura-t18e-tank","title":"Innokin Endura T18E Replacement Tank","description":"\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eInnokin Endura T18E Replacement Tank\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eFifty-one millimetres tall and eighteen wide. The \u003cstrong\u003eInnokin Endura T18E replacement tank\u003c\/strong\u003e is a compact \u003c\/span\u003e\u003cspan\u003estainless steel and Pyrex glass\u003c\/span\u003e\u003cspan\u003e \u003cstrong\u003eMTL Tank\u003c\/strong\u003e built for \u003cstrong\u003eInnokin's Endura pen-style kits\u003c\/strong\u003e. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003e2ml TPD-compliant capacity\u003c\/span\u003e\u003cspan\u003e, \u003c\/span\u003e\u003cspan\u003e510 threaded\u003c\/span\u003e\u003cspan\u003e base, \u003c\/span\u003e\u003cspan\u003efixed airflow\u003c\/span\u003e\u003cspan\u003e, and a twist top-fill system that keeps refills clean. It runs \u003cstrong\u003eInnokin's \u003c\/strong\u003ededicated \u003c\/span\u003e\u003cstrong\u003eT18E coils\u003c\/strong\u003e\u003cspan\u003e\u003cstrong\u003e \u003c\/strong\u003ewith \u003cstrong\u003eJapanese organic cotton \u003c\/strong\u003ewicking and a \u003c\/span\u003e\u003cstrong\u003e1.5ohm\u003c\/strong\u003e\u003cspan\u003e\u003cstrong\u003e resistance\u003c\/strong\u003e optimised at \u003c\/span\u003e\u003cspan\u003e14W\u003c\/span\u003e\u003cspan\u003e. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eIf the tank on your \u003cstrong\u003eEndura T18E or T22E kit\u003c\/strong\u003e is scratched, cracked, or just due a refresh, this is the direct replacement. Nine colours in the store picker. Over 18s only. Browse more\u003c\/span\u003e\u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/mtl-tanks\"\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/a\u003e\u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/mtl-tanks\" target=\"_blank\" title=\"MTL Tanks\" rel=\"noopener\"\u003e\u003cstrong\u003eMTL Tanks\u003c\/strong\u003e\u003c\/a\u003e\u003cspan\u003e at Pirate Vapes.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eWhy vapers choose the Endura T18E tank:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eFixed airflow tuned for a tight cigarette-style draw\u003c\/span\u003e\u003cspan\u003e that suits ex-smokers and MTL vapers who want consistency without adjusting anything between fills\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eTwist top-fill\u003c\/span\u003e\u003cspan\u003e keeps the refill process quick and contained, no unscrewing the base, no removing the tank from the device\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003ePyrex glass section\u003c\/span\u003e\u003cspan\u003e resists cracking from citrus and menthol e-liquids that degrade polycarbonate tanks over time\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eNine colours\u003c\/span\u003e\u003cspan\u003e to match or contrast with the Endura kit body\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eT18E coils with Japanese organic cotton\u003c\/span\u003e\u003cspan\u003e deliver clean, reliable flavour at low wattage without burning through battery life\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eInnokin Endura T18E Replacement Tank Features\u003c\/span\u003e\u003c\/h2\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eWhy Fixed Airflow Works Here\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eNo dial. No ring. No choices to make. The T18E tank has a single, fixed airflow path calibrated for mouth-to-lung draws. For vapers who just want to fill and go, this removes a variable that most MTL users never touch anyway. The draw is tight, consistent, and deliberately close to the resistance of pulling on a cigarette. That is the entire point of the Endura line.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003ePyrex and Steel, Nothing Else\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eGenuine \u003c\/span\u003e\u003cspan\u003ePyrex glass\u003c\/span\u003e\u003cspan\u003e seated between \u003c\/span\u003e\u003cspan\u003estainless steel\u003c\/span\u003e\u003cspan\u003e hardware. Pyrex matters because citrus and cinnamon flavourings attack cheaper plastic tanks and cause hazing or cracking within days. The T18E handles those without issue. Vape whatever\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003enic salts\u003c\/span\u003e\u003cspan\u003e you prefer without worrying about the tank degrading.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eThat Twist Top-Fill, Though\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eQuarter-turn of the top cap. The fill port sits to one side of the central airflow tube, wide enough for most 10ml nozzle tips. No need to detach the tank from the device. Innokin's leak-free coil swap system also means you can change the coil from the base without draining the remaining liquid first.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eSized for Pockets, Not Display Cases\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eAt \u003c\/span\u003e\u003cspan\u003e51mm tall and 18mm across\u003c\/span\u003e\u003cspan\u003e, this is one of the most compact\u003c\/span\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/vape-tanks\"\u003e \u003c\/a\u003e\u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/vape-tanks\" target=\"_blank\" title=\"Vape Tanks\" rel=\"noopener\"\u003eVape Tanks\u003c\/a\u003e\u003c\/strong\u003e\u003cspan\u003e you will find. Sits flush on the Endura kits without overhang, and the whole assembly fits in a jacket pocket. Portability over cloud production. That is the trade-off, and it is the right one for this device.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eOne Coil Platform, Zero Guesswork\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe T18E tank uses \u003cstrong\u003eInnokin's dedicated \u003c\/strong\u003e\u003c\/span\u003e\u003cstrong\u003eT18E coils\u003c\/strong\u003e\u003cspan\u003e at \u003c\/span\u003e\u003cspan\u003e1.5ohm\u003c\/span\u003e\u003cspan\u003e. One resistance. One wattage. One outcome. You do not need to cross-reference compatibility charts or choose between mesh, ceramic, and standard wire. The coil goes in, the cotton soaks, and you vape. Replacement packs of five are available in the\u003c\/span\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/innokin-vapes\"\u003e \u003c\/a\u003e\u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/innokin-vapes\" target=\"_blank\" title=\"Innokin range\" rel=\"noopener\"\u003eInnokin range\u003c\/a\u003e\u003c\/strong\u003e\u003cspan\u003e at \u003cstrong\u003ePirate Vapes\u003c\/strong\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eInnokin Endura T18E Replacement Tank Colours\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eNine finishes. Same stainless steel and Pyrex glass across all of them.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e#buttons\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli data-section-id=\"t3dqof\" data-start=\"105\" data-end=\"114\"\u003eBlack\u003cspan aria-hidden=\"true\" class=\"PDq2pG_selectionAnchor\"\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli data-section-id=\"1l1v5i7\" data-start=\"115\" data-end=\"125\"\u003eSilver\u003c\/li\u003e\n\u003cli data-section-id=\"7km2y7\" data-start=\"126\" data-end=\"135\"\u003eWhite\u003c\/li\u003e\n\u003cli data-section-id=\"1xv21q9\" data-start=\"136\" data-end=\"144\"\u003eGrey\u003c\/li\u003e\n\u003cli data-section-id=\"179h4gr\" data-start=\"145\" data-end=\"152\"\u003eRed\u003c\/li\u003e\n\u003cli data-section-id=\"whto2b\" data-start=\"153\" data-end=\"162\"\u003eGreen\u003c\/li\u003e\n\u003cli data-section-id=\"31ey8k\" data-start=\"163\" data-end=\"171\"\u003ePink\u003c\/li\u003e\n\u003cli data-section-id=\"uh14xy\" data-start=\"172\" data-end=\"182\"\u003ePurple\u003c\/li\u003e\n\u003cli data-section-id=\"hji6ue\" data-start=\"183\" data-end=\"192\" data-is-last-node=\"\"\u003eRainbow\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eHow to Set Up the Innokin Endura T18E Replacement Tank\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eQuick swap. Under five minutes.\u003c\/span\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eUnscrew the old tank\u003c\/span\u003e\u003cspan\u003e from your Endura device anticlockwise at the 510 base.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eCheck the new tank's coil.\u003c\/span\u003e\u003cspan\u003e If none is installed, unscrew the base, push a T18E coil into the housing, and screw the base back on.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003ePrime the coil\u003c\/span\u003e\u003cspan\u003e with three to four drops of e-liquid onto the cotton visible through the side ports.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eTwist the top cap\u003c\/span\u003e\u003cspan\u003e open, fill to just below the max line, and close firmly. Avoid the central airflow tube.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eWait a full six minutes.\u003c\/span\u003e\u003cspan\u003e The Japanese organic cotton is dense. Skip this and the first draw chars the wick permanently.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eScrew the tank onto your device\u003c\/span\u003e\u003cspan\u003e, take two gentle dry puffs, then vape normally at \u003c\/span\u003e\u003cspan\u003e14W\u003c\/span\u003e\u003cspan\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eWhat's in the Innokin Endura T18E Replacement Tank Box\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eOne T18E replacement tank in your selected colour. No e-liquid, no battery, no device, no spare glass. Replacement T18E\u003c\/span\u003e\u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/vape-coils\"\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/a\u003e\u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/vape-coils\" target=\"_blank\" title=\"Vape Coils\" rel=\"noopener\"\u003e\u003cstrong\u003eVape Coils\u003c\/strong\u003e\u003c\/a\u003e\u003cspan\u003e sold separately in packs of five.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eThe MTL Tank Built for Every Endura Kit\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eDirect fit for the \u003c\/span\u003e\u003cstrong\u003eInnokin Endura T18E\u003c\/strong\u003e\u003cspan\u003e and the \u003c\/span\u003e\u003cstrong\u003eEndura T22E\u003c\/strong\u003e\u003cspan\u003e\u003cstrong\u003e kits\u003c\/strong\u003e. Both run at a fixed \u003c\/span\u003e\u003cspan\u003e14W\u003c\/span\u003e\u003cspan\u003e output matched to the T18E coil's \u003c\/span\u003e\u003cspan\u003e1.5ohm\u003c\/span\u003e\u003cspan\u003e resistance. The 510 threading means the tank physically fits any standard 510 mod, but it performs best on the Endura platform.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eWhat it does not fit: \u003cstrong\u003eInnokin's Zenith range\u003c\/strong\u003e, the Zlide, the Go Z, or any Innokin pod system. Those use entirely different coil platforms. The original Endura T18 (non-E version) also uses different coils, so confirm your kit model before ordering.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eAbout Innokin\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe\u003cstrong\u003e Endura series\u003c\/strong\u003e is where \u003cstrong\u003eInnokin\u003c\/strong\u003e built its reputation with new vapers and ex-smokers. The original T18 was one of the first MTL kits widely recommended by UK vape shops as a genuine cigarette replacement, and the T18E carries that forward with improved coil design and the leak-free swap system. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eJapanese organic cotton, fixed airflow, one coil resistance, one wattage. Everything tuned to do one thing well.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eStock Up and Save\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eA spare tank is worth having before you need one. Pyrex is tough, but a drop onto tile is a drop onto tile. Picking up a replacement now means a cracked glass does not leave you without a device for days. Pair it with a fresh pack of T18E coils and a few bottles of 50\/50 nic salt, and you are covered for weeks. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eEvery order from \u003c\/span\u003e\u003cspan\u003ePirate Vapes\u003c\/span\u003e\u003cspan\u003e ships the same day before 4 pm in padded packaging. TPD-compliant stock, age-verified checkout, over-18s only. Free Pirate Post on orders over £25.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eConclusion\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe\u003cstrong\u003e Endura T18E replacement tank \u003c\/strong\u003eis a small, simple, well-built \u003cstrong\u003eMTL tank t\u003c\/strong\u003ehat does exactly what it needs to do. Fixed airflow, Pyrex glass, twist top-fill, and compatibility with Innokin's proven T18E coils at 1.5ohm and 14W. Nine colours, 510 threading, and a compact footprint that keeps the whole setup2 genuinely pocketable. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eIf your current tank needs replacing or you want a spare on hand, this is the part. Browse more from the\u003c\/span\u003e\u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/vape-accessories\"\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/a\u003e\u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/vape-accessories\" target=\"_blank\" title=\"Vape Accessories\" rel=\"noopener\"\u003e\u003cstrong\u003eVape Accessories\u003c\/strong\u003e\u003c\/a\u003e\u003cspan\u003e collection or explore the full range of\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003ereplacement tank glass\u003c\/span\u003e\u003cspan\u003e at\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003ePirate Vapes\u003c\/strong\u003e\u003cspan\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eFAQs\u003c\/span\u003e\u003c\/h2\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eWhat coils fit the T18E tank?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eInnokin T18E coils at \u003c\/span\u003e\u003cspan\u003e1.5ohm\u003c\/span\u003e\u003cspan\u003e. The tank accepts coils within the \u003c\/span\u003e\u003cspan\u003e1.2ohm to 2.5ohm\u003c\/span\u003e\u003cspan\u003e range, but the 1.5ohm is the standard and most widely available option. Original T18 coils are not compatible.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eWhat e-liquid works best?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003e50\/50 VG\/PG nic salts at \u003c\/span\u003e\u003cspan\u003e10mg or 20mg\u003c\/span\u003e\u003cspan\u003e. The fixed airflow and low wattage suit thinner liquids. High-VG blends above 60\/40 will not wick properly through the small coil ports.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eDoes the T18E tank fit any 510 mod?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003ePhysically, yes. The 510 thread is universal. But the tank is optimised for \u003c\/span\u003e\u003cspan\u003e14W\u003c\/span\u003e\u003cspan\u003e. Running it on a high-wattage mod risks burning the coil instantly. Stick to the Endura T18E or T22E kits, or set your mod to 14W manually if it supports that range.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eHow often should I replace the tank?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eOnly when the glass cracks or the threading wears out. The glass and steel are durable under normal use. The coil inside is the part that needs regular replacement, roughly every one to two weeks.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eCan I use the T18E tank for DTL vaping?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eNo. Fixed airflow, 1.5ohm resistance, 14W output. Everything about this tank is built for a tight, mouth-to-lung draw. If you want DTL, you need a completely different tank and coil setup.\u003c\/span\u003e\u003c\/p\u003e","brand":"Innokin","offers":[{"title":"Black","offer_id":52543556321562,"sku":null,"price":7.99,"currency_code":"GBP","in_stock":true},{"title":"Silver","offer_id":52543556354330,"sku":null,"price":7.99,"currency_code":"GBP","in_stock":true},{"title":"White","offer_id":52543556387098,"sku":null,"price":7.99,"currency_code":"GBP","in_stock":true},{"title":"Grey","offer_id":52543556419866,"sku":null,"price":7.99,"currency_code":"GBP","in_stock":true},{"title":"Red","offer_id":52543556452634,"sku":null,"price":7.99,"currency_code":"GBP","in_stock":true},{"title":"Green","offer_id":52543556485402,"sku":null,"price":7.99,"currency_code":"GBP","in_stock":true},{"title":"Pink","offer_id":52543556518170,"sku":null,"price":7.99,"currency_code":"GBP","in_stock":true},{"title":"Purple","offer_id":52543556550938,"sku":null,"price":7.99,"currency_code":"GBP","in_stock":true},{"title":"Rainbow","offer_id":52543556583706,"sku":null,"price":7.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0995\/5675\/3690\/files\/Innokin_Endura_T18E_Replacement_Tank.jpg?v=1784352750"},{"product_id":"aspire-nautilus-3-22-tank","title":"Aspire Nautilus 3 22 Tank","description":"\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eNautilus 3 22 Tank By Aspire\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe \u003cstrong\u003e22mm diameter \u003c\/strong\u003eversion of \u003cstrong\u003eAspire's best-selling Nautilus 3\u003c\/strong\u003e. Built for mouth-to-lung vaping, the \u003c\/span\u003e\u003cstrong\u003eNautilus 3²² tank\u003c\/strong\u003e\u003cspan\u003e\u003cstrong\u003e \u003c\/strong\u003eholds \u003c\/span\u003e\u003cstrong\u003e2ml of e-liquid\u003c\/strong\u003e\u003cspan\u003e, runs on \u003cstrong\u003eAspire's \u003c\/strong\u003e\u003c\/span\u003e\u003cspan\u003e\u003cstrong\u003epress-fit coil\u003c\/strong\u003e system\u003c\/span\u003e\u003cspan\u003e, and gives you \u003c\/span\u003e\u003cspan\u003eseven airflow settings\u003c\/span\u003e\u003cspan\u003e to fine-tune the draw. \u003c\/span\u003e\u003cspan\u003eStainless steel\u003c\/span\u003e\u003cspan\u003e construction, \u003c\/span\u003e\u003cspan\u003e510 threaded\u003c\/span\u003e\u003cspan\u003e, and compatible with the full Nautilus coil family. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eTwo coils are included in the box: a \u003c\/span\u003e\u003cspan\u003e0.3ohm\u003c\/span\u003e\u003cspan\u003e and a \u003c\/span\u003e\u003cspan\u003e1.0ohm\u003c\/span\u003e\u003cspan\u003e, both from \u003cstrong\u003eAspire's Nautilus mesh range.\u003c\/strong\u003e Three colours in the store picker. Over 18s only. Browse more\u003c\/span\u003e\u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/mtl-tanks\"\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/a\u003e\u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/mtl-tanks\" title=\"MTL Tanks\" target=\"_blank\"\u003e\u003cstrong\u003eMTL Tanks\u003c\/strong\u003e\u003c\/a\u003e\u003cspan\u003e at \u003cstrong\u003ePirate Vapes\u003c\/strong\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eWhy vapers choose the Nautilus 3²²:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eSeven airflow settings\u003c\/span\u003e\u003cspan\u003e give genuinely fine control over the draw, more adjustment than most MTL tanks bother offering\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003ePress-fit coil swaps\u003c\/span\u003e\u003cspan\u003e take seconds. No threading, no cross-threaded coils ruining a fresh purchase\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eTwo coils in the box\u003c\/span\u003e\u003cspan\u003e means you can compare the 0.3ohm and 1.0ohm straight away and find your preference without buying extras\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003e22mm diameter\u003c\/span\u003e\u003cspan\u003e keeps the tank compact and better matched to slimmer MTL mods than the standard-size Nautilus 3\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eStainless steel build\u003c\/span\u003e\u003cspan\u003e holds up to daily use far better than the resin bodies on cheaper MTL tanks\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eNautilus 3 22 Tank By Aspire Features\u003c\/span\u003e\u003c\/h2\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eSeven Airflow Settings, Not Two\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eMost MTL tanks give you a handful of airflow positions at best. The Nautilus 3²² has \u003c\/span\u003e\u003cspan\u003eseven\u003c\/span\u003e\u003cspan\u003e, adjusted by turning the lower section of the tank to reveal differently sized air vents. Smaller holes give a tighter, warmer draw. Larger holes open things up for a cooler, slightly looser pull. Worth spending five minutes finding your setting rather than leaving it wherever it lands out of the box.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003ePress-Fit Coils, Genuinely Fast\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eAspire's press-fit system on the Nautilus 3 series removes the base, pulls the old coil, and presses the new one in until it seats. No threading. Fair enough, it sounds like a small thing, but cross-threaded coils are one of the most common reasons a coil dies before it even gets wet.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eThe Shutoff Valve Actually Matters\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eDuring a coil swap, the fill port's \u003c\/span\u003e\u003cspan\u003ee-liquid shutoff valve\u003c\/span\u003e\u003cspan\u003e closes automatically so liquid in the tank does not drain into the coil chamber while the base is open. Less mess, and less chance of flooding a fresh coil before it has even been primed.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eTwo Coils, Two Different Vapes\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe box ships with a \u003c\/span\u003e\u003cspan\u003e0.3ohm mesh coil\u003c\/span\u003e\u003cspan\u003e and a \u003c\/span\u003e\u003cspan\u003e1.0ohm mesh coil\u003c\/span\u003e\u003cspan\u003e, both from the Aspire Nautilus range. The 1.0ohm gives a tighter, classic MTL draw closer to a cigarette pull. The 0.3ohm opens things up slightly for more vapour and a warmer hit. Try both before settling on a favourite. Aspire's wider \u003c\/span\u003e\u003cspan\u003eNautilus coil range\u003c\/span\u003e\u003cspan\u003e also fits, so you are not locked to just these two resistances long-term.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eSized for Slimmer Mods\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eAt \u003c\/span\u003e\u003cspan\u003e22mm diameter\u003c\/span\u003e\u003cspan\u003e, the Nautilus 3²² is noticeably slimmer than the standard 24mm Nautilus 3. It sits flush on smaller pen-style devices and slimmer box mods without the overhang you get pairing a 24mm tank with a narrower body. If you have struggled to match a Nautilus tank to a compact mod before, this is the fix.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eNautilus 3 22 Tank By Aspire Colours\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThree finishes in the store picker. All use the same stainless steel body with a different plating.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e#buttons\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli data-section-id=\"t3dqof\" data-start=\"67\" data-end=\"76\"\u003eBlack\u003cspan aria-hidden=\"true\" class=\"PDq2pG_selectionAnchor\"\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli data-section-id=\"a7stb9\" data-start=\"77\" data-end=\"89\"\u003eGunmetal\u003c\/li\u003e\n\u003cli data-section-id=\"649fkv\" data-start=\"90\" data-end=\"98\" data-is-last-node=\"\"\u003eSilver\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eHow to Set Up the Nautilus 3 22 Tank By Aspire\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eStraightforward press-fit swap. A couple of minutes if the coil is not already installed.\u003c\/span\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eUnscrew the base\u003c\/span\u003e\u003cspan\u003e from the bottom of the tank to expose the coil chamber.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003ePress the Nautilus coil\u003c\/span\u003e\u003cspan\u003e firmly into the base until it clicks into place. No threading needed.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eScrew the base back onto the tank\u003c\/span\u003e\u003cspan\u003e, making sure it is fully seated.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003ePrime the coil\u003c\/span\u003e\u003cspan\u003e with three to four drops of e-liquid onto the exposed wicking ports before filling.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eFill through the top port\u003c\/span\u003e\u003cspan\u003e, keeping liquid away from the central airflow tube, and close the cap.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eLeave the tank to stand for six minutes\u003c\/span\u003e\u003cspan\u003e before your first draw, then start vaping at a low airflow setting and adjust from there.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eWhat's in the Nautilus 3 22 Tank By Aspire Box\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eOne Nautilus 3²² tank in your selected colour, \u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eone \u003c\/span\u003e\u003cspan\u003e0.3ohm Aspire Nautilus coil\u003c\/span\u003e\u003cspan\u003e, \u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eone \u003c\/span\u003e\u003cspan\u003e1.0ohm Aspire Nautilus coil\u003c\/span\u003e\u003cspan\u003e, \u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003ea spare glass tube, \u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eand an O-ring pack. \u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eNo e-liquid, no device, no battery included.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eBuilt for MTL, Compatible Across the Nautilus Range\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe \u003cstrong\u003eNautilus 3²² \u003c\/strong\u003eis designed for\u003cstrong\u003e \u003c\/strong\u003e\u003c\/span\u003e\u003ca title=\"Mouth-to-Lung Vaping\" href=\"https:\/\/piratevapes.co.uk\/collections\/mtl-vape-kits\" target=\"_blank\"\u003e\u003cstrong\u003eMouth-to-Lung Vaping\u003c\/strong\u003e\u003c\/a\u003e\u003cspan\u003e, delivering a tight, cigarette-style draw rather than an open-lung DTL pull. It runs on \u003cstrong\u003eAspire's Nautilus coil\u003c\/strong\u003e platform, which spans a wide resistance range from mesh 0.3ohm through to 1.8ohm coils, \u003cstrong\u003eplus Nautilus 2 \u003c\/strong\u003eand 2S variants. Its \u003c\/span\u003e\u003cspan\u003e510 threading\u003c\/span\u003e\u003cspan\u003e means it fits any standard 510 mod, though it is built to be paired with lower-wattage \u003cstrong\u003eMTL devices\u003c\/strong\u003e rather than sub-ohm box mods.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eWhat it does not fit: \u003cstrong\u003eAspire's Cleito, Atlantis, \u003c\/strong\u003eor \u003cstrong\u003eCloudflask ranges\u003c\/strong\u003e, all of which use entirely separate coil platforms for DTL vaping. If your device currently runs GTX, PnP, or other third-party coils, those will not fit here either. Replacement\u003c\/span\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/aspire-vapes\"\u003e \u003c\/a\u003e\u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/aspire-vapes\" title=\"Aspire Coils\" target=\"_blank\"\u003eAspire Coils\u003c\/a\u003e\u003c\/strong\u003e\u003cspan\u003e\u003cstrong\u003e \u003c\/strong\u003efor the Nautilus range are stocked separately.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eAbout Aspire\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe \u003cstrong\u003eNautilus\u003c\/strong\u003e line is arguably Aspire's most enduring contribution to vaping. The original \u003cstrong\u003eNautilus tank\u003c\/strong\u003e helped define what a dependable \u003cstrong\u003eMTL tank \u003c\/strong\u003eshould look like, long before \u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/pod-kits\" target=\"_blank\" title=\"Pod Kits\" rel=\"noopener\"\u003e\u003cstrong\u003ePod Kits\u003c\/strong\u003e\u003c\/a\u003e took over the entry-level market, and the platform has been refined through several generations since. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe \u003cstrong\u003eNautilus 3²²\u003c\/strong\u003e takes that same proven coil system and press-fit design and fits it into a slimmer 22mm body, aimed at vapers who want the classic Nautilus draw on a smaller, more travel-friendly mod. It is less a reinvention than a refinement of something Aspire already got right.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eStock Up and Save\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eA spare \u003cstrong\u003eNautilus coil\u003c\/strong\u003e or two is worth keeping on hand, since flavour on \u003cstrong\u003eMTL coils\u003c\/strong\u003e tends to fade before the coil actually fails outright. Pick up a fresh pack alongside the tank, along with a bottle or two of\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003enic salts\u003c\/span\u003e\u003cspan\u003e, and you will not be caught short mid-week. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eEvery order from \u003c\/span\u003e\u003cstrong\u003ePirate Vapes\u003c\/strong\u003e\u003cspan\u003e\u003cstrong\u003e \u003c\/strong\u003eships same day before 4 pm in padded packaging. \u003cstrong\u003eTPD-compliant\u003c\/strong\u003e stock, age-verified checkout, over-18s only. Free Pirate Post on orders over £25.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eConclusion\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe \u003cstrong\u003eNautilus 3²²\u003c\/strong\u003e brings Aspire's proven press-fit coil system and genuinely adjustable airflow into a slimmer, more compact tank built specifically for \u003cstrong\u003eMTL vaping\u003c\/strong\u003e. Two coils in the box, seven airflow settings, and a stainless steel build that will outlast most tanks at this price point. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eIf you want the classic Nautilus draw without the bulk of the standard-size tank, this is worth a look. Browse the full range of \u003c\/span\u003e\u003cstrong\u003eAspire Coils\u003c\/strong\u003e\u003cspan\u003e and\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003evape accessories\u003c\/span\u003e\u003cspan\u003e, or head back to\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003ePirate Vapes\u003c\/strong\u003e\u003cspan\u003e\u003cstrong\u003e \u003c\/strong\u003efor more from the Nautilus range.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eFAQs\u003c\/span\u003e\u003c\/h2\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eWhat coils fit the Nautilus 3²²?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eAspire's Nautilus coil range, including the \u003c\/span\u003e\u003cspan\u003e0.3ohm and 1.0ohm mesh coils\u003c\/span\u003e\u003cspan\u003e included in the box, plus Nautilus 2, 2S, and Triton mini-Clapton variants.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eIs this tank MTL or DTL?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eMTL.\u003c\/span\u003e\u003cspan\u003e The Nautilus 3²² is built for a tight, mouth-to-lung draw. It is not designed for sub-ohm cloud production.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eWhat e-liquid should I use?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003e50\/50 VG\/PG nic salts work best, ideally \u003c\/span\u003e\u003cspan\u003e10mg or 20mg\u003c\/span\u003e\u003cspan\u003e. The coil range and low-to-mid wattage suit thinner liquids rather than high-VG shortfills.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eHow is this different from the standard Nautilus 3?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eMainly size. The Nautilus 3²² has a \u003c\/span\u003e\u003cspan\u003e22mm diameter\u003c\/span\u003e\u003cspan\u003e rather than the standard tank's 24mm, making it a better match for slimmer MTL devices.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eDoes the tank fit any 510 mod?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eYes, the \u003c\/span\u003e\u003cspan\u003e510 threading\u003c\/span\u003e\u003cspan\u003e is universal, but it performs best on lower-wattage MTL devices rather than sub-ohm box mods.\u003c\/span\u003e\u003c\/p\u003e","brand":"Aspire","offers":[{"title":"Black","offer_id":52544165380378,"sku":null,"price":19.95,"currency_code":"GBP","in_stock":true},{"title":"Gunmetal","offer_id":52544165413146,"sku":null,"price":19.95,"currency_code":"GBP","in_stock":true},{"title":"Silver","offer_id":52544165445914,"sku":null,"price":19.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0995\/5675\/3690\/files\/Aspire_Nautilus_3_22_Tank.jpg?v=1784357723"},{"product_id":"aspire-k1-plus-tank","title":"Aspire K1 Plus Replacement Tank","description":"\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eAspire K1 Plus Replacement Tank \u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eA \u003c\/span\u003e\u003cspan\u003e1.9ml Pyrex glass tank\u003c\/span\u003e\u003cspan\u003e built specifically for\u003cstrong\u003e Aspire's \u003c\/strong\u003e\u003c\/span\u003e\u003cstrong\u003eK1 Plus\u003c\/strong\u003e\u003cspan\u003e\u003cstrong\u003e kit\u003c\/strong\u003e (and a fantastic top-fill upgrade for older K2 setups), and one of the simplest ways to keep an ageing Aspire pod-style tank running without buying a whole new kit. It uses \u003cstrong\u003eAspire's \u003c\/strong\u003e\u003c\/span\u003e\u003cstrong\u003eBVC (Bottom Vertical Coil)\u003c\/strong\u003e\u003cspan\u003e\u003cstrong\u003e platform\u003c\/strong\u003e, ships with a coil already fitted, and fills from the top so you are not stripping the whole unit down every time you need a refill. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003ePolished stainless steel housing, a genuine Pyrex tube, and a redesigned top-fill system make this a straightforward replacement for anyone whose original tank has cracked, clouded, or just worn out. Suited to \u003cstrong\u003eMTL vaping\u003c\/strong\u003e. Stocked at \u003c\/span\u003e\u003cstrong\u003ePirate Vapes\u003c\/strong\u003e\u003cspan\u003e\u003cstrong\u003e \u003c\/strong\u003efor K1 Plus and K2 owners who just need the part, not a whole new kit. Over 18s only.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eWhy vapers choose this:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eA genuine like-for-like replacement \u003c\/span\u003e\u003cspan\u003efor your K1 Plus, or a seamless top-fill upgrade for your K2 setup. No adapters, no workarounds. \u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003ePyrex glass, not plastic.\u003c\/span\u003e\u003cspan\u003e Holds up to stronger e-liquids and resists the clouding that plastic tubes develop over time.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eComes with a coil fitted.\u003c\/span\u003e\u003cspan\u003e You are not ordering the tank and then waiting on a separate coil order to actually use it.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eTop-fill design.\u003c\/span\u003e\u003cspan\u003e Faster refills, less risk of spilling liquid down the side of the device.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eGenuinely compact.\u003c\/span\u003e\u003cspan\u003e At 16mm across, it barely changes the feel of the device it is fitted to.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eAspire K1 Plus Replacement Tank Features\u003c\/span\u003e\u003c\/h2\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eWhy the Pyrex Glass Matters\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eCheaper replacement tanks use plastic tubes that scratch, cloud, and occasionally crack under pressure from stronger e-liquids. Aspire fits this tank with a proper \u003c\/span\u003e\u003cspan\u003ePyrex glass\u003c\/span\u003e\u003cspan\u003e tube instead, which holds its clarity for longer and copes better with day-to-day handling. Not glamorous, but it is the difference between a tank that still looks new after three months and one that does not. If you only need the tube itself, check \u003c\/span\u003e\u003ca title=\"Replacement Tank Glass\" href=\"https:\/\/piratevapes.co.uk\/collections\/replacement-tank-glass\" target=\"_blank\"\u003e\u003cstrong\u003eReplacement Tank Glass\u003c\/strong\u003e\u003c\/a\u003e\u003cspan\u003e before buying the full unit again.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eTop-Fill, Finally\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eOlder Aspire clearomiser tanks needed a full strip-down to refill: unscrew the base, remove the coil, fill from underneath. This tank flips that. Pull the mouthpiece, tip liquid in from the top, and you are done. Quicker, and less chance of e-liquid ending up somewhere it should not.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eBVC Coils, Built In\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe tank ships with a \u003c\/span\u003e\u003cspan\u003eBVC coil\u003c\/span\u003e\u003cspan\u003e already installed, Aspire's bottom vertical coil design that feeds liquid more evenly than older horizontal setups. That means fewer dry hits and a more consistent draw across the coil's lifespan.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eBuilt for MTL, Not DTL\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThis is not a cloud-chasing tank. At 1.9ml capacity with resistances of 1.6ohm and 1.8ohm, it is designed for a tight, cigarette-style \u003c\/span\u003e\u003cspan\u003emouth-to-lung\u003c\/span\u003e\u003cspan\u003e draw, the same style covered across our \u003c\/span\u003e\u003cstrong\u003e\u003ca title=\"MTL Vape Kits\" href=\"https:\/\/piratevapes.co.uk\/collections\/mtl-vape-kits\" target=\"_blank\"\u003eMTL Vape Kits\u003c\/a\u003e\u003c\/strong\u003e\u003cspan\u003e range. If you are coming from a K1 Plus or K2 and want that exact feel back, this tank delivers it without any adjustment period.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eCross-Compatible Upgrades \u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe K1 Plus tank is the native replacement for the K1 Plus kit. However, because it shares the legendary \u003c\/span\u003e\u003cspan\u003eAspire BVC coil platform\u003c\/span\u003e\u003cspan\u003e and \u003c\/span\u003e\u003cspan\u003estandard 510 threading\u003c\/span\u003e\u003cspan\u003e, it also makes a fantastic top-fill upgrade for older K1 or K2 battery owners looking to ditch the old bottom-fill routine (just note there will be a tiny 1mm cosmetic overhang on a K2 battery).\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eAspire K1 Plus Replacement Tank Colours and Resistance Options\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe tank is stocked in one finish and two coil resistances, matched to which Aspire device you are running.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eClear\u003c\/strong\u003e\u003cspan\u003e\u003cstrong\u003e is the only colour in the store picker:\u003c\/strong\u003e a fully transparent stainless steel and glass build that lets you see your e-liquid level at a glance.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eOn resistance, most buyers are replacing a tank for a specific device, so the choice makes itself. The \u003c\/span\u003e\u003cspan\u003e1.6ohm\u003c\/span\u003e\u003cspan\u003e coil runs slightly warmer for a throatier hit, while the \u003c\/span\u003e\u003cspan\u003e1.8ohm\u003c\/span\u003e\u003cspan\u003e coil gives a cooler, softer draw. Both are fully compatible with this tank, letting you tweak your MTL experience.\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cstrong\u003eClear:\u003c\/strong\u003e\u003cspan\u003e Transparent glass and steel, visible fill level\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cstrong\u003e1.6ohm:\u003c\/strong\u003e\u003cspan\u003e\u003cstrong\u003e \u003c\/strong\u003eWarmer MTL draw\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cstrong\u003e1.8ohm:\u003c\/strong\u003e\u003cspan\u003e\u003cstrong\u003e \u003c\/strong\u003eCooler MTL draw\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eHow to Set Up the Aspire K1 Plus Replacement Tank\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eStraightforward swap. A couple of minutes, start to finish.\u003c\/span\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eRemove\u003c\/span\u003e\u003cspan\u003e the mouthpiece from the top of the old tank and unscrew the tank from the device base.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eFit\u003c\/span\u003e\u003cspan\u003e the new tank onto the base, making sure the threading catches evenly before tightening.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003ePrime\u003c\/span\u003e\u003cspan\u003e the coil with two to three drops of e-liquid through the top fill port, directly onto the visible cotton.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eFill\u003c\/span\u003e\u003cspan\u003e the tank with your chosen e-liquid via the top-fill mechanism, stopping just below the max line.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eLet it sit for six minutes\u003c\/span\u003e\u003cspan\u003e before you take your first draw, longer if you have the patience, so the cotton has properly soaked through.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eStart at low wattage\u003c\/span\u003e\u003cspan\u003e on your device and take a couple of gentle draws before vaping normally.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eWhat's in the Aspire K1 Plus Replacement Tank Box\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eOne Aspire K1 Plus tank with a BVC coil already fitted, plus a printed user manual. No e-liquid, no device, and no spare coils beyond the one installed. If you get through coils quickly, it is worth picking up a separate pack of BVC coils rather than a new tank each time.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eNative to the K1 Plus, Cross-Compatible with the K2. \u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThis tank is built natively for the \u003c\/span\u003e\u003cspan\u003eK1 Plus\u003c\/span\u003e\u003cspan\u003e and fits the K2 battery perfectly as a hardware upgrade. It is not designed to fit \u003cstrong\u003eAspire's Nautilus Range\u003c\/strong\u003e, the Cleito series, or the newer PockeX and Gotek pod systems, which each run on their own tank platforms. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eWrong device, wrong part, however similar the branding looks on the box. Browse the full range of\u003cstrong\u003e \u003c\/strong\u003e\u003c\/span\u003e\u003cstrong\u003e\u003ca title=\"\u0026amp;nbsp;Aspire Vapes\" href=\"https:\/\/piratevapes.co.uk\/collections\/aspire-vapes\" target=\"_blank\"\u003eAspire Vapes\u003c\/a\u003e\u003c\/strong\u003e\u003cspan\u003e\u003cstrong\u003e \u003c\/strong\u003eto find the correct tank or coil for your model.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eAbout Aspire\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eAspire has been building \u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/mtl-tanks\" target=\"_blank\" title=\" MTL-Focused Tanks \" rel=\"noopener\"\u003e\u003cstrong\u003eMTL-Focused Tanks\u003c\/strong\u003e \u003c\/a\u003eand pod devices for over a decade, and the K1 and K2 lines sit firmly in that tradition: simple, low-wattage, cigarette-style vaping without menus or settings to fuss over. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe\u003cstrong\u003e K-series \u003c\/strong\u003ewas designed for vapers who want something that just works, rather than a device built around chasing bigger clouds. This tank continues that approach with the same coil family and fill logic, just refreshed with\u003cstrong\u003e Pyrex glass\u003c\/strong\u003e and a proper top-fill system.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eStock Up and Save\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eTank glass is one of those parts you do not think about until it cracks, usually at the worst possible moment. A spare on hand means you are never without a device while you wait for a delivery. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003ePirate Vapes\u003c\/strong\u003e\u003cspan\u003e\u003cstrong\u003e \u003c\/strong\u003eships every order the same day before 4pm, in padded packaging that keeps glass tanks intact in transit. All stock is TPD compliant, checkout is age-verified, over 18s only.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eConclusion\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe \u003cstrong\u003eAspire K1 Plus Replacement Tank \u003c\/strong\u003edoes one job and does it properly: it gets your K1 Plus or K2 battery back in action without a whole new kit. \u003cstrong\u003ePyrex glass\u003c\/strong\u003e, a coil already fitted, and a top-fill system that saves you the faff of the old bottom-fill design. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003ePick the 1.6ohm for a warmer draw or the 1.8ohm for a classic, smooth MTL vape. Check\u003cstrong\u003e \u003c\/strong\u003e\u003c\/span\u003e\u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/vape-coils\" target=\"_blank\" title=\"Vape Coils\" rel=\"noopener\"\u003e\u003cstrong\u003eVape Coils\u003c\/strong\u003e\u003c\/a\u003e\u003cspan\u003e for spares once this one wears in, and browse \u003c\/span\u003e\u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/vape-accessories\" target=\"_blank\" title=\"Vape Accessories\" rel=\"noopener\"\u003e\u003cstrong\u003eVape Accessories\u003c\/strong\u003e\u003c\/a\u003e\u003cspan\u003e for the rest of your MTL setup. Find it at\u003cstrong\u003e \u003c\/strong\u003e\u003c\/span\u003e\u003cstrong\u003ePirate Vapes\u003c\/strong\u003e\u003cspan\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eFAQs\u003c\/span\u003e\u003c\/h2\u003e\n\u003ch3 dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eDoes this tank fit the K2?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eYes. While it is physically wider than the original K2 tank (16mm vs 15mm), it uses the same 510 threading and runs flawlessly using the same Aspire BVC coils. It’s a great way to add top-fill convenience to a K2 battery.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eWhat is the e-liquid capacity?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003e1.9ml\u003c\/span\u003e\u003cspan\u003e, just under the UK's 2ml legal limit for tank devices.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eCan I use this with Nautilus or Cleito tanks?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eNo. It is built to run exclusively on the Aspire BVC coil platform. Nautilus and Cleito tanks use different threading and coil systems entirely.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eHow long does the coil last?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eAspire hasn't published a fixed lifespan for this coil. Most BVC coils run for one to two weeks under regular MTL use, depending on how sweet your e-liquid is and how often you vape.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eDoes it come with a coil already fitted?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eYes, one BVC coil is installed in the box, along with the user manual. No spare coils are included.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eIs this suitable for sub-ohm or DTL vaping?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eNo. It is an MTL-only tank, built for a tight, cigarette-style draw rather than big clouds.\u003c\/span\u003e\u003c\/p\u003e","brand":"Aspire","offers":[{"title":"Default Title","offer_id":52544453771546,"sku":null,"price":9.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0995\/5675\/3690\/files\/Aspire_K1_Plus_Replacement_Tank.jpg?v=1784364779"},{"product_id":"geekvape-zeus-nano-tank","title":"Geekvape Zeus Nano Tank","description":"\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eGeekvape Zeus Nano Tank\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eA sub-ohm tank that actually does both styles properly. The \u003c\/span\u003e\u003cstrong\u003eGeekvape Zeus Nano\u003c\/strong\u003e\u003cspan\u003e holds \u003c\/span\u003e\u003cspan\u003e2ml\u003c\/span\u003e\u003cspan\u003e of e-liquid within the\u003cstrong\u003e UK's TPD limit\u003c\/strong\u003e, runs on \u003cstrong\u003eGeekvape's \u003c\/strong\u003e\u003c\/span\u003e\u003cspan\u003e\u003cstrong\u003eB Series\u003c\/strong\u003e mesh coils\u003c\/span\u003e\u003cspan\u003e, and switches between a tight MTL draw and a proper DTL cloud depending on which coil you fit. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eTwo resistances are included in the box, adjustable top airflow lets you fine-tune either style, and the whole thing fills from the top so refills take seconds rather than minutes. Built with 510 threading, so it drops onto most standard mods without an adapter. Stocked in Gold and Rainbow at \u003c\/span\u003e\u003cstrong\u003ePirate Vapes\u003c\/strong\u003e\u003cspan\u003e. Over 18s only.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eWhy vapers choose this:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eOne tank, two vaping styles.\u003c\/span\u003e\u003cspan\u003e Swap the coil and you get \u003cstrong\u003eMTL \u003c\/strong\u003eor \u003cstrong\u003eDTL \u003c\/strong\u003efrom the same body, no need for two separate tanks.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eGeekvape's B Series mesh coils.\u003c\/span\u003e\u003cspan\u003e Sharper flavour and a longer coil life than the older round-wire coils this replaced.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eAdjustable top airflow.\u003c\/span\u003e\u003cspan\u003e Dial the draw in without hunting for a bottom ring buried under your mod.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eGenuinely quick refills.\u003c\/span\u003e\u003cspan\u003e Top-fill design means you are not stripping the tank down every time the tank runs low.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003e510 threaded.\u003c\/span\u003e\u003cspan\u003e Fits onto the vast majority of standard mods without needing an adapter.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eGeekvape Zeus Nano Tank Features\u003c\/span\u003e\u003c\/h2\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eB Series Mesh, Not the Old Round Wire\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eGeekvape's older tanks ran round-wire coils that heated unevenly and lost flavour quickly. The \u003c\/span\u003e\u003cspan\u003eB Series mesh coils\u003c\/span\u003e\u003cspan\u003e in this tank spread heat across a flat surface instead, which means more consistent vapour and a coil that holds its flavour for longer before it needs changing. Not a small upgrade, honestly, once you have used both back to back.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eTwo Coils, Two Completely Different Vapes\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe included \u003c\/span\u003e\u003cspan\u003e0.4ohm\u003c\/span\u003e\u003cspan\u003e coil runs at 25 to 33W and is built for denser, warmer DTL clouds. The \u003c\/span\u003e\u003cspan\u003e0.6ohm\u003c\/span\u003e\u003cspan\u003e sits at 15 to 25W and gives a tighter, cooler pull closer to MTL. Fair enough to want both depending on the mood, and this tank lets you switch between them rather than buying a second device.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eAirflow You Can Actually Reach\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe adjustable airflow ring sits at the top of the tank rather than tucked away at the base. Quick to reach, quick to adjust mid-vape, and it works whether you are running the tight 0.6ohm setup or opened up for the 0.4ohm.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eTop-Fill Without the Faff\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003ePull the drip tip, tip liquid in through the top port, done. No unscrewing the base, no risk of flooding the airflow slots underneath. If you have used an older bottom-fill \u003cstrong\u003eGeekvape tank\u003c\/strong\u003e, this is the upgrade you have been waiting for.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eBuilt to Actually Fit Your Mod\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003e510 threading covers most box mods and pod mods on the market. Check our \u003c\/span\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/vape-tanks\" target=\"_blank\" title=\" Vape Tanks \" rel=\"noopener\"\u003eVape Tanks\u003c\/a\u003e\u003c\/strong\u003e\u003cspan\u003e range if you are shopping for a device to pair it with, since the \u003cstrong\u003eZeus Nano\u003c\/strong\u003e is sold as a tank only.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eGeekvape Zeus Nano Tank Colours\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eTwo finishes in the store picker, both metallic and vibrant. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003e#buttons\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\"\u003eGold\u003c\/li\u003e\n\u003cli dir=\"ltr\"\u003eRainbow\u003cspan\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eHow to Set Up the Geekvape Zeus Nano Tank\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eA few minutes from box to first draw.\u003c\/span\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eUnscrew\u003c\/span\u003e\u003cspan\u003e the top cap and remove the pre-installed coil packaging if fitted for transit.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eChoose your coil.\u003c\/span\u003e\u003cspan\u003e Fit the 0.6ohm for MTL or the 0.4ohm for DTL, and press it firmly into the base until snug.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003ePrime\u003c\/span\u003e\u003cspan\u003e the coil with two to three drops of e-liquid directly onto the visible mesh through the airflow slots.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eFill\u003c\/span\u003e\u003cspan\u003e the tank via the top-fill port, stopping just below the max fill line.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eLet it rest for eight minutes\u003c\/span\u003e\u003cspan\u003e before your first draw, giving the mesh time to fully saturate.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eSet your airflow\u003c\/span\u003e\u003cspan\u003e to match your coil choice, tighter for the 0.6ohm and more open for the 0.4ohm, then start vaping.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eWhat's in the Geekvape Zeus Nano Tank Box\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eOne Zeus Nano tank body, a\u003cstrong\u003e 0.4ohm B Series coil\u003c\/strong\u003e, a \u003cstrong\u003e0.6ohm B Series coil\u003c\/strong\u003e, a drip tip, a coil removal tool, a spare parts pack, a spare glass tube, and the user manual. No device and no e-liquid included, so you will need both to get started if this is your first Geekvape tank.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eRuns on Any 510 Device, MTL or DTL\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe\u003cstrong\u003e Zeus Nano's 510 \u003c\/strong\u003econnection means it fits onto the great majority of box mods and pod mods without an adapter. Whether you pair it with a dedicated MTL device or a higher-wattage mod for DTL clouds depends entirely on which coil you have fitted. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eBrowse \u003c\/span\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/dtl-tanks\" target=\"_blank\" title=\"DTL Tanks \" rel=\"noopener\"\u003eDTL Tanks\u003c\/a\u003e\u003c\/strong\u003e\u003cspan\u003e\u003cstrong\u003e \u003c\/strong\u003eif cloud production is the priority, or\u003cstrong\u003e \u003c\/strong\u003e\u003c\/span\u003e\u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/mtl-tanks\" target=\"_blank\" title=\"MTL Tanks\" rel=\"noopener\"\u003e\u003cstrong\u003eMTL Tanks\u003c\/strong\u003e\u003c\/a\u003e\u003cspan\u003e if you are after that tighter, cigarette-style draw instead. What it will not do is fit proprietary pod systems that use their own snap-in cartridges rather than standard 510 threading.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eAbout Geekvape\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003e\u003cstrong\u003eGeekvape \u003c\/strong\u003ebuilt its name on rugged, performance-focused hardware, and the \u003cstrong\u003eZeus range\u003c\/strong\u003e sits among its most established tank families. The \u003cstrong\u003eB Series mesh coil\u003c\/strong\u003e platform used here has replaced round-wire coils across most of Geekvape's current tank lineup, chosen for the flavour and longevity gains mesh heating brings over older designs. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe Nano trims the original Zeus down to a smaller, lighter footprint while keeping the same coil ecosystem, which means spares are easy to find and cross-compatible with other \u003cstrong\u003eB Series tanks\u003c\/strong\u003e in the range.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eStock Up and Save\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eMesh coils wear faster than you expect once you are running a tank daily, especially at the higher end of the 0.4ohm's wattage range. Keeping a couple of spare \u003cstrong\u003eB Series coils \u003c\/strong\u003ein the drawer means you are never caught out mid-week. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003e\u003cstrong\u003ePirate Vapes\u003c\/strong\u003e \u003c\/span\u003e\u003cspan\u003edispatches every order the same day before 4pm, with age-verified checkout throughout. All stock is TPD compliant and restricted to over 18s only, with Free Pirate Post on orders over £25.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eConclusion\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe \u003cstrong\u003eGeekvape Zeus Nano Tank\u003c\/strong\u003e earns its place by doing two jobs well instead of one job brilliantly. Fit the 0.6ohm for a tighter MTL pull or the \u003cstrong\u003e0.4ohm\u003c\/strong\u003e for genuine DTL clouds, adjust the top airflow to match, and refill through the top without any of the usual faff. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eMesh coils, 510 threading, and two colourways that do not look like everyone else's tank. Check our\u003cstrong\u003e \u003c\/strong\u003e\u003c\/span\u003e\u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/geekvape-coils\" target=\"_blank\" title=\"Geekvape Coils\" rel=\"noopener\"\u003e\u003cstrong\u003eGeekvape Coils\u003c\/strong\u003e\u003c\/a\u003e\u003cspan\u003e range for spares once the included pair wear in, browse \u003c\/span\u003e\u003cspan\u003evape accessories\u003c\/span\u003e\u003cspan\u003e for everything else your setup needs, and pick one up at \u003c\/span\u003e\u003cstrong\u003ePirate Vapes\u003c\/strong\u003e\u003cspan\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eFAQs\u003c\/span\u003e\u003c\/h2\u003e\n\u003ch3 dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eDoes this tank do MTL or DTL?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eBoth. Fit the 0.6ohm coil for MTL, or the 0.4ohm for DTL. Same tank, different coil.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eWhat is the actual capacity?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003e2ml\u003c\/span\u003e\u003cspan\u003e in the UK version, which is the TPD limit. Some international listings show 3.5ml, but UK stock is capped at 2ml.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eWill it fit my mod?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eAlmost certainly. It uses standard \u003c\/span\u003e\u003cspan\u003e510 threading\u003c\/span\u003e\u003cspan\u003e, which covers the vast majority of box mods and pod mods sold in the UK.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eHow long do the included coils last?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eTypically one to two weeks with daily use, though the 0.4ohm at higher wattage tends to wear faster than the 0.6ohm.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eDoes it come with spare parts?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eYes. A spare glass tube and a small spare parts pack are included alongside the two coils and coil tool.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eCan I buy replacement coils separately?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eYes, Geekvape B Series coils are sold separately once your originals wear out.\u003c\/span\u003e\u003c\/p\u003e","brand":"Geekvape","offers":[{"title":"Gold","offer_id":52544483426586,"sku":null,"price":17.99,"currency_code":"GBP","in_stock":true},{"title":"Rainbow","offer_id":52544483459354,"sku":null,"price":17.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0995\/5675\/3690\/files\/Geekvape_Zeus_Nano_Tank.jpg?v=1784366338"},{"product_id":"aspire-nautilus-3sr-tank","title":"Aspire Nautilus 3SR Replacement Tank","description":"\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eAspire Nautilus 3SR Replacement Tank \u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eStainless steel build. Slide top-fill. Bottom adjustable airflow. The\u003cstrong\u003e Aspire Nautilus 3SR\u003c\/strong\u003e is a \u003cstrong\u003e2ml MTL\u003c\/strong\u003e and \u003cstrong\u003eRDTL tank\u003c\/strong\u003e built around one of the most trusted coil platforms in UK vaping. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eIt takes every \u003cstrong\u003eNautilus series coil Aspire \u003c\/strong\u003emakes, including the \u003cstrong\u003eBVC range\u003c\/strong\u003e and the newer meshed options. Three interchangeable protective tank tubes with metal sleeves let you switch up the look while keeping the glass covered. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003e\u003cstrong\u003ePirate Vapes \u003c\/strong\u003estocks the Nautilus 3SR in \u003cstrong\u003eBlack, Silver, \u003c\/strong\u003eand \u003cstrong\u003eGunmetal\u003c\/strong\u003e, each one shipped as genuine with age-verified checkout across the UK. A solid tank for anyone already running a Nautilus setup at \u003cstrong\u003ePirate Vapes\u003c\/strong\u003e, or building a new one from scratch. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eWhy vapers choose this:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eEight compatible coils across the Nautilus range, covering everything from tight MTL to open RDTL.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eSlide top-fill that does not require removing the tank from the mod.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eBottom adjustable airflow for precise draw control at every resistance.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eThree interchangeable protective tank tubes with metal sleeves for customisation and glass protection.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eMHRA-notified, TPD-compliant, genuine Aspire stock with age-verified checkout.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eAspire Nautilus 3SR Replacement Tank Features\u003c\/span\u003e\u003c\/h2\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eSlide Top-Fill Without the Mess\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eMost tanks make you unscrew a cap to refill. The\u003cstrong\u003e Nautilus 3SR \u003c\/strong\u003euses a sliding top cap instead. Push it towards the red arrow, pour your juice in through the port, and slide it shut. The design helps reduce spills during refilling compared to full-cap removal. Quick, clean, and you do not need to take the tank off the mod.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eEight Coils, One Tank\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThis is where the Nautilus platform earns its reputation. The 3SR accepts every Nautilus series coil and the Triton Mini Clapton. That is eight different resistances from 0.3Ω up to 1.8Ω. Tight cigarette-style draw on the BVC 1.8Ω. Warmer hit on the 0.3Ω mesh. Browse our\u003c\/span\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/vape-coils\"\u003e \u003c\/a\u003e\u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/vape-coils\" title=\"Vape Coils\" target=\"_blank\"\u003eVape Coils\u003c\/a\u003e\u003c\/strong\u003e\u003cspan\u003e\u003cstrong\u003e \u003c\/strong\u003ecollection to find the resistance that fits your style.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eBottom Airflow You Can Fine-Tune\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eRotate the AFC ring at the base, and the draw changes completely. Close it down for a proper MTL pull. Open it up for a restricted direct-to-lung inhale. The ring has enough resistance that it does not spin on its own in your pocket, which is a problem cheaper tanks never solve.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eThree Protective Tubes, Three Looks\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eEach Nautilus 3SR ships with three interchangeable tank tubes fitted with metal sleeves. Swap between them to change the look without affecting performance. The metal sleeves provide additional protection for the glass compared with running an exposed tank.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003e510 Drip Tip, Your Choice\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe drip tip is a standard 510, so if the included one does not suit your lips, any aftermarket 510 tip slots right in. The stock tip is comfortable enough for all-day use, but having the option matters when you are running the tank for hours. Pair it with your preferred juice from our\u003c\/span\u003e\u003cspan\u003e \u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/e-liquids\"\u003e\u003cstrong\u003eE\u003c\/strong\u003e\u003c\/a\u003e\u003c\/span\u003e\u003ca title=\"E-Liquids Range\" href=\"https:\/\/piratevapes.co.uk\/collections\/e-liquids\" target=\"_blank\"\u003e\u003cstrong\u003e-Liquids\u003c\/strong\u003e\u003c\/a\u003e\u003cspan\u003e\u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/e-liquids\"\u003e\u003cstrong\u003e Range\u003c\/strong\u003e\u003c\/a\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eHow to Set Up the Aspire Nautilus 3SR Replacement Tank\u003c\/span\u003e\u003c\/h2\u003e\n\u003col\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eUnscrew the base of the tank and press-fit your chosen coil into place.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eScrew the base back on and attach the assembled tank to any 510-threaded mod. Finger-tight is enough.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eSlide the top cap towards the red arrow mark to open the fill port.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eFill with up to 2ml of e-liquid through the port, leaving a small air gap at the top.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eSlide the top cap back to seal. Leave the tank standing upright for five minutes so the coil wick soaks fully.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eAdjust the airflow ring at the base. Tighter for MTL, looser for RDTL.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eFire and vape. If the first draw tastes dry or papery, wait another minute for the cotton to catch up.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eWhat's in the Aspire Nautilus 3SR Replacement Tank Box\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eOne \u003cstrong\u003eNautilus 3SR tank\u003c\/strong\u003e, two coils \u003cstrong\u003e(a 1.8Ω BVC and a 0.3Ω Mesh)\u003c\/strong\u003e, a 510 drip tip, a spare O-ring set, and a user manual. No mod, no battery, no e-liquid. You supply the mod and the juice. Box contents may vary slightly by region or retail package.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eFits Any 510 Mod in Your Collection\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe \u003cstrong\u003eNautilus 3SR \u003c\/strong\u003euses a standard 510 connection. That means it threads onto virtually every regulated mod on the market. No proprietary fittings, no adapter rings. Aspire built it alongside the Zelos M80, but at 24.6 mm in diameter, it sits flush on most mid-size\u003c\/span\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/vape-mods\"\u003e \u003c\/a\u003e\u003ca title=\"Vape Mods\" href=\"https:\/\/piratevapes.co.uk\/collections\/vape-mods\" target=\"_blank\"\u003eVape Mods\u003c\/a\u003e\u003c\/strong\u003e\u003cspan\u003e\u003cstrong\u003e \u003c\/strong\u003eand box mods without overhang.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003e\u003cstrong\u003eCoil compatibility runs across the full Nautilus platform: \u003c\/strong\u003eNautilus BVC 1.6Ω (7-11W), BVC 1.8Ω (10-14W), Meshed 1.0Ω (13-15W), Meshed 0.3Ω (23-28W), Nautilus 2 Coil 0.7Ω (18-23W), Nautilus 2S Coil 0.4Ω (23-28W), Nautilus 2S Meshed 0.7Ω (20-25W), and Triton Mini Clapton 1.8Ω (13-16W). Eight coils. One tank.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eAbout Aspire\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eAspire has been making vape hardware since 2013, and the Nautilus line is where most people first heard the name. The original Nautilus became one of Aspire's most recognised MTL tanks and helped popularise replaceable \u003cstrong\u003eBVC coil technology\u003c\/strong\u003e across the industry. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eSince then, Aspire has iterated through the Nautilus 2, 3, 3S, and now the 3SR, each time refining the coil platform and the build quality. The \u003cstrong\u003eBVC (Bottom Vertical Coil)\u003c\/strong\u003e design they pioneered is still the backbone of the range. \u003cstrong\u003ePirate Vapes \u003c\/strong\u003estocks \u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/aspire-vapes\" target=\"_blank\" title=\"Genuine Aspire\" rel=\"noopener\"\u003e\u003cstrong\u003eGenuine Aspire\u003c\/strong\u003e\u003c\/a\u003e hardware across our\u003c\/span\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/vape-tanks\"\u003e \u003c\/a\u003e\u003ca title=\"Vape Tanks\" href=\"https:\/\/piratevapes.co.uk\/collections\/vape-tanks\" target=\"_blank\"\u003eVape Tanks\u003c\/a\u003e\u003c\/strong\u003e\u003cspan\u003e\u003cstrong\u003e \u003c\/strong\u003ecollection.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eStock Up and Save\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe 3SR ships with two coils in the box, but coils are consumables. How long they last depends on your wattage, juice sweetness, and how often you vape. Many users get one to two weeks per coil, though yours may differ. Keeping a spare five-pack means you will not get caught short mid-week waiting on a delivery. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003ePirate Vapes dispatches every order tracked, packed carefully so your glass tank arrives in one piece. Checkout is age-verified, 18+ delivery only, and every product is TPD-compliant and MHRA-notified. Rather not reorder each time manually? The Crow's Nest posts replacement coils on a schedule with savings built in.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eConclusion\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe \u003cstrong\u003eAspire Nautilus 3SR \u003c\/strong\u003eis a well-built, versatile MTL and RDTL replacement tank with a coil platform that gives you genuine range. Eight \u003cstrong\u003ecompatible coils \u003c\/strong\u003efrom 0.3Ω to 1.8Ω, slide top-fill, adjustable bottom airflow, and a 510 connection that fits virtually any mod. Two coils in the box let you test both ends of the spectrum straight away. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eIf you are after a tank that does its job without fuss, the Nautilus 3SR earns its place. Grab one from \u003cstrong\u003ePirate Vapes \u003c\/strong\u003ewith fast, age-verified UK delivery.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eFAQs\u003c\/span\u003e\u003c\/h2\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eWill this tank fit my mod?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eIf your mod has a 510 connection, yes. The Nautilus 3SR uses a standard 510 thread. At 24.6 mm in diameter, it sits flush on most mods without any overhang.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eDo I need to buy coils separately?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eTwo coils come in the box: a 1.8Ω BVC for MTL and a 0.3Ω Mesh for RDTL. Replacement packs of five are sold separately when those run out.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eWhat e-liquid works best with this tank?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eHigher-resistance coils perform best with 50\/50 PG\/VG e-liquids or nic salts. The lower-resistance mesh coils can handle slightly thicker blends, but 50\/50 is a safe starting point across the range. The UK Aspire Vendor recommends 50% VG as a baseline.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eIs this the same as the Nautilus 3S?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eNo. The 3SR features a redesigned slide top-fill and interchangeable protective tank tubes with metal sleeves, while maintaining full compatibility with the Nautilus coil range.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eHow long does a coil last?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eIt depends on wattage, juice sweetness, and how often you vape. Many users replace coils every one to two weeks, but the actual lifespan varies. Replace it when the flavour drops off or it starts tasting slightly burnt.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eCan I use this for sub-ohm vaping?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe 0.3Ω and 0.4Ω coils run in sub-ohm territory at 23-28W. It is not a cloud-chasing tank, but it handles restricted direct-to-lung draws well at those wattages.\u003c\/span\u003e\u003c\/p\u003e","brand":"Aspire","offers":[{"title":"Best Colour","offer_id":52544511017242,"sku":null,"price":23.99,"currency_code":"GBP","in_stock":true},{"title":"Black","offer_id":52544511050010,"sku":null,"price":23.99,"currency_code":"GBP","in_stock":true},{"title":"Silver","offer_id":52544511082778,"sku":null,"price":23.99,"currency_code":"GBP","in_stock":true},{"title":"Gunmetal","offer_id":52544511115546,"sku":null,"price":23.99,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0995\/5675\/3690\/files\/Aspire_Nautilus_3SR_Replacement_Tank.jpg?v=1784367703"},{"product_id":"innokin-t18e-pro-tank","title":"Innokin T18E Pro Tank | Top Fill Replacement Tank","description":"\u003ch2 dir=\"ltr\"\u003eInnokin T18E Pro Tank \u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003ePirate Vapes stocks the\u003cstrong\u003e Innokin T18E Pro Top Fill Replacement Tank \u003c\/strong\u003efor anyone running an Endura T22 Pro kit and needing a fresh tank. Cracked glass, worn seals, or just fancying a second colour. The \u003cstrong\u003eT18E Pro\u003c\/strong\u003e holds 2ml, fills from a sliding top cap, and uses 510 threading that pairs it with most low-wattage mods on the market. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eA 1.7Ω coil sits pre-installed inside, with a spare coil in the box. Stainless steel frame, Pyrex glass, fixed MTL airflow. \u003cstrong\u003ePirate Vapes\u003c\/strong\u003e ships every age-verified order across the UK.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eWhy vapers choose this:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eSliding top-fill that opens and shuts without unscrewing anything.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eStainless steel armour wrapped around the glass for drop protection.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eNo-spill coil swap system, so changing a coil does not mean draining the tank.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eFixed airflow tuned specifically for a tight, cigarette-style MTL draw.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003e510 connection fits the Endura T22 Pro and most other compatible mods.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eInnokin T18E Pro Tank Features\u003c\/span\u003e\u003c\/h2\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eSliding Top-Fill\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eSlide the cap in the direction of the arrow, pour, slide it shut. No unscrewing, no loose parts sitting on the kitchen counter. The fill port is wide enough for most bottle nozzles, and the seal sits tight when it closes. Refills take about ten seconds, and nothing spills if you keep the tank upright.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eStainless Steel Armour\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eA steel sleeve wraps around the outside of the Pyrex glass, leaving clear viewing windows on each side. You can still see juice levels at a glance. The sleeve adds real protection against drops and knocks, which matters when you carry this tank in a pocket or bag every day. Pirate Vapes keeps multiple colours in stock across the\u003c\/span\u003e\u003cspan\u003e\u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/vape-tanks\"\u003e \u003c\/a\u003e\u003ca title=\"Vape Tank\" href=\"https:\/\/piratevapes.co.uk\/collections\/vape-tanks\" target=\"_blank\"\u003e\u003cstrong\u003eV\u003c\/strong\u003e\u003c\/a\u003e\u003c\/span\u003e\u003ca title=\"Vape Tank\" href=\"https:\/\/piratevapes.co.uk\/collections\/vape-tanks\" target=\"_blank\"\u003e\u003cstrong\u003eape Tank\u003c\/strong\u003e\u003c\/a\u003e\u003cspan\u003e\u003cstrong\u003e \u003c\/strong\u003erange.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eNo-Spill Coil Swap\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eInnokin's no-spill coil system lets you pull the old coil out and push a new one in without emptying the tank first. Line up the flat sections on the base, push it in, and it locks. No threading, no leaking. The spent coil slides out cleanly. Pick up replacement\u003c\/span\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/vape-coils\"\u003e \u003c\/a\u003e\u003ca title=\"Vape Coils\" href=\"https:\/\/piratevapes.co.uk\/collections\/vape-coils\" target=\"_blank\"\u003eVape Coils\u003c\/a\u003e\u003c\/strong\u003e\u003cspan\u003e for the T18E Pro from the same order.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eFixed MTL Airflow\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eNo adjustable ring on this one. Innokin sets the airflow for a tight, cigarette-style draw, and it stays that way. That makes it predictable. Every hit feels the same, every time. If you want something that mimics smoking without guessing at airflow settings, the T18E Pro does not over complicate things.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003e510 Connection\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eStandard 510 threading means this tank screws onto the Endura T22 Pro and onto most other 510-compatible mods and batteries. If you already own a CoolFire, an MVP, or any other Innokin mod, it will likely fit. Worth checking the diameter of your device before ordering, though. Pair it with a 50\/50 or \u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/nic-salts\" target=\"_blank\" title=\"Nic Salt E-Liquid\" rel=\"noopener\"\u003e\u003cstrong\u003eNic Salt\u003c\/strong\u003e\u003c\/a\u003e\u003c\/span\u003e\u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/nic-salts\" title=\"Nic Salt E-Liquid\" target=\"_blank\"\u003e\u003cstrong\u003e E-Liquid\u003c\/strong\u003e\u003c\/a\u003e\u003cspan\u003e\u003cstrong\u003e \u003c\/strong\u003efor the best results.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eInnokin T18E Pro Tank Colour Options\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe\u003cstrong\u003e T18E Pro Top Fill Replacement Tank\u003c\/strong\u003e comes in three colourways. Pick whichever matches your Endura T22 Pro kit, or go with something different.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003e#buttons\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli data-section-id=\"ioxona\" data-start=\"83\" data-end=\"98\"\u003eMatte Black\u003cspan aria-hidden=\"true\" class=\"PDq2pG_selectionAnchor\"\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli data-section-id=\"ukor9c\" data-start=\"99\" data-end=\"117\"\u003eBrushed Silver\u003c\/li\u003e\n\u003cli data-section-id=\"1alajwq\" data-start=\"118\" data-end=\"130\" data-is-last-node=\"\"\u003eGrey Steel\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eHow to Set Up the Innokin T18E Pro Top Fill Replacement Tank\u003c\/span\u003e\u003c\/h2\u003e\n\u003col\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eUnscrew the base of the tank and pull out the pre-installed coil if you want to prime it first. Drip 2 to 3 drops of e-liquid directly into the cotton visible on the coil.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003ePush the coil back in, lining up the flat edges with the alignment tracks inside the base, and tighten the base back onto the tank.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eSlide the top cap open in the direction of the arrow. Fill the tank with your chosen e-liquid, avoiding the centre airflow tube.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eSlide the cap shut and let the tank stand upright for 5 to 10 minutes. Do not skip the soak. Vaping a dry coil burns the cotton and ruins the coil in one hit.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eScrew the tank onto your Endura T22 Pro or any 510-compatible device, and inhale.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eWhat's in the Innokin T18E Pro Tank Box\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003e1 x Innokin T18E Pro Replacement Tank (2ml)\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003e1 x 1.7Ω Prism T18E Pro Coil (pre-installed)\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003e1 x 1.7Ω Prism T18E Pro Coil (spare)\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003e1 x Spare O-Ring Set\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eBuilt for the Innokin Endura T22 Pro\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe T18E Pro tank is a direct replacement for the tank that comes with the\u003cstrong\u003e Innokin Endura T22 Pro Kit\u003c\/strong\u003e. Same threading, same alignment, same fit. It also works with the \u003cstrong\u003eEndura T18E Pro\u003c\/strong\u003e battery and any mod or device that runs a 510 connection. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe coils inside are \u003cstrong\u003eInnokin Prism T18E coils\u003c\/strong\u003e, available in 1.5Ω, 1.7Ω, and 2.0Ω. Other Innokin tanks use different coil systems, so do not mix T18E coils with Z coils or iSub coils.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eAbout Innokin\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eInnokin has been building vape hardware since 2011. The Endura series is what put them on the map with newer vapers. The T18 was one of the first kits people recommended to ex-smokers looking for a tight, quiet MTL draw. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe T22 Pro is the current version of that same idea: simple, reliable, built for \u003cstrong\u003ehigh-PG liquids\u003c\/strong\u003e and nic salts. Innokin manufactures in Shenzhen and distributes globally. Their products consistently pass TPD and MHRA checks for UK sale. Not flashy. Just dependable hardware that works the way it should.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eStock Up and Save\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eTanks crack. Seals wear out. Having a spare means you do not go a week without your setup while a replacement ships. \u003cstrong\u003ePirate Vapes\u003c\/strong\u003e packs every tank carefully with protective packaging, dispatched same day on orders placed before 4 pm. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eAll purchases go through age-verified checkout 18+ delivery only, and every product on\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003ePirate Vapes\u003c\/strong\u003e\u003cspan\u003e is TPD-compliant and MHRA-notified. Grab a spare tank alongside your next coil restock and keep your T22 Pro running without downtime.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eConclusion\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe \u003cstrong\u003eInnokin T18E Pro Top Fill Replacement Tank\u003c\/strong\u003e is a simple, solidly built \u003cstrong\u003e\u003ca title=\"MTL Tank\" href=\"https:\/\/piratevapes.co.uk\/collections\/mtl-tanks\" target=\"_blank\"\u003eMTL Tank\u003c\/a\u003e \u003c\/strong\u003ewith a sliding fill system and fixed airflow. It fits the \u003cstrong\u003eEndura T22 Pro\u003c\/strong\u003e and any 510 mod, comes with two coils in the box, and handles nic salts and \u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/50-50-e-liquids\" target=\"_blank\" title=\"50\/50 E-Liquids\" rel=\"noopener\"\u003e\u003cstrong\u003e50\/50 E-Liquids\u003c\/strong\u003e\u003c\/a\u003e without fuss. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eIf your current tank has seen better days or you want a backup in a different colour, this is the part you need. Available now at \u003cstrong\u003ePirate Vapes\u003c\/strong\u003e with tracked UK delivery.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eFAQs\u003c\/span\u003e\u003c\/h2\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eWill this tank fit a standard T18 or T22 kit?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eIt is designed for the T22 Pro specifically. The threading is 510, so it may physically connect to older Endura models, but coil compatibility and tank alignment differ. Check your device name before ordering.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eWhat coils does this tank use?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe tank ships with two of the updated 1.7Ω Pro coils, but it is fully backwards compatible if you prefer to buy and run the older 1.5Ω Prism T18E coils separately. \u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eCan I use high-VG e-liquids in this tank?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eStick to 50\/50 VG\/PG or higher-PG blends. High-VG liquids (70% or above) are too thick for the small coil wicking ports and will cause dry hits.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eHow often should I change the coil?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eRoughly every one to three weeks, depending on usage and how sweet your juice is. When the flavour goes flat or tastes burnt, it is time for a fresh one.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eIs this the same as the T18E tank (non-Pro)?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eSimilar design but different top-fill mechanism. The Pro version has a sliding top-fill instead of a screw-off cap. Both use T18E coils.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eDoes the tank come with e-liquid?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eNo. The box contains the tank, two coils, and spare O-rings. You supply the juice.\u003c\/span\u003e\u003c\/p\u003e","brand":"Innokin","offers":[{"title":"Matte Black","offer_id":52544639729946,"sku":null,"price":9.99,"currency_code":"GBP","in_stock":true},{"title":"Brushed Silver","offer_id":52544639762714,"sku":null,"price":9.99,"currency_code":"GBP","in_stock":true},{"title":"Grey Steel","offer_id":52544639795482,"sku":null,"price":9.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0995\/5675\/3690\/files\/Innokin_T18E_Pro_Top_Fill_Replacement_Tank.jpg?v=1784374714"},{"product_id":"voopoo-rta-tank","title":"Voopoo RTA Pod Tank","description":"\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eVoopoo RTA 2ml Replacement Pod Tank \u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eMost pod tanks use factory coils. The \u003cstrong\u003eVoopoo RTA 2ml Replacement Pod Tank \u003c\/strong\u003eskips that entirely. It drops a full rebuildable deck into the PnP pod format, giving you complete control over coil material, resistance, and wicking. 2ml capacity, bottom airflow, stainless steel and PCTG construction. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eClicks onto a \u003cstrong\u003eDrag X or Drag S\u003c\/strong\u003e through magnetic installation with no threaded connection required. Whether you are new to rebuildables or an experienced builder, the deck is designed to make coil installation quick and uncomplicated. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003e\u003cstrong\u003ePirate Vapes \u003c\/strong\u003estocks both the Black and Stainless Steel finishes, \u003cstrong\u003egenuine Voopoo\u003c\/strong\u003e only, with age-verified checkout and tracked UK delivery. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eWhy vapers choose this:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eFully rebuildable deck inside a magnetic pod format. No separate 510 adapter is needed for PnP devices.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eBottom airflow with dual intake channels wrapping around the coil for even heating and consistent flavour.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eStainless steel and PCTG build. Durable, lightweight, and portable at just 26 mm in diameter, with construction that holds up to regular cleaning and rebuilding.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eSupports MTL to Restricted DL draws depending on your coil build and airflow setting. The fully adjustable airflow system offers an extensive range of customisation, whether you prefer a tight, restricted draw or an open, airy pull.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eBeginner-friendly deck design that simplifies coil installation, making it accessible to vapers who are new to rebuildables while still offering the control that experienced builders expect.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eTPD-compliant and MHRA-notified, genuine Voopoo, sold through Pirate Vapes with age-verified checkout.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eVoopoo RTA 2ml Replacement Pod Tank Features\u003c\/span\u003e\u003c\/h2\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eRebuildable Deck in a Pod Shell\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eTwo posts. One terminal each. Drop your coil leads in, tighten the hex screws from the top, and you are built. The deck sits inside the pod body, not on a separate 510 section. That means you get RTA-level flavour while retaining the convenience of the magnetic PnP platform. The open terminals make it straightforward to position your coil centrally over the airflow, which is where most of the flavour gains come from. Whether you are a beginner picking up your first spool of wire or an experienced builder running complex coil profiles, the dual-post layout keeps the process quick and uncomplicated. \u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eInfinite Airflow System\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eVoopoo routes air through dual intake channels at the base, wrapping around the coil from both sides. The airflow is fully adjustable, offering an extensive range of customisation to match your preferred draw style. Tighten the ring for a more restricted draw. Open it up, and you get a loose direct lung pull. Same pod, very different vape depending on how you set it. The dual airflow design delivers smooth, consistent vapour production with rich flavour on every puff. The wide-bore drip tip and chamber size favour a restricted DL style, though tighter builds can still deliver a looser MTL experience. \u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eBottom Fill, Top Drip\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe main fill port is underneath, sealed by a silicone stopper. Pull it back, fill up to 2ml, press shut. This design minimises leaks and keeps refilling quick and mess-free. The build deck can also be manually primed from the top before you close the pod, which helps when you want to test a new juice without committing to a full fill. Handy when you are working through different \u003c\/span\u003e\u003cspan\u003ee-liquids\u003c\/span\u003e\u003cspan\u003e to find your go-to. \u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eMagnetic Connection\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eNo threaded connection needed. The pod clicks onto the \u003cstrong\u003eDrag X, Drag S, or any PnP-compatible \u003c\/strong\u003edevice magnetically. Pull it off just as fast. This magnetic connection system makes installation seamless, ensuring a secure and hassle-free attachment every time. The optional 510 base (sold separately) also allows the pod to be used on a wide range of compatible box mods and 510-threaded devices, which opens up pairing options well beyond the PnP range. Browse our\u003cstrong\u003e \u003c\/strong\u003e\u003c\/span\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/vape-tanks\" title=\"Vape Tanks\" target=\"_blank\"\u003eVape Tanks\u003c\/a\u003e\u003c\/strong\u003e\u003cspan\u003e collection at Pirate Vapes for more options. \u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eSingle Coil, Multiple Styles\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe dual-post deck is optimised for single-coil builds. That keeps things simple while allowing for enhanced flavour output and reduced complexity compared to dual-coil setups. A higher resistance round wire build (for example, around 1.0Ω) tightens the draw for a more restricted hit on nic salts. A lower resistance build (for example, a 0.3Ω Clapton) opens the airflow right up for more vapour on a shortfill. The deck supports a wide range of single-coil configurations, so you can tailor the vape to your preference. \u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eVoopoo RTA 2ml Replacement Pod Tank Colour Options\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThis is a rebuildable tank atomiser. You fill it with your own e-liquid, so there are no preset flavour options to choose from. The choice here is finish, and Voopoo keeps it simple with two colourways. Both options blend functionality with clean aesthetics.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003e#buttons\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\"\u003eBlack\u003c\/li\u003e\n\u003cli dir=\"ltr\"\u003eStainless Steel\u003cspan\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003ePair your build with nic salts for restricted draws or \u003ca title=\"70\/30 Shortfills\" href=\"https:\/\/piratevapes.co.uk\/collections\/70-30-shortfills\" target=\"_blank\"\u003e\u003cstrong\u003e70\/30 Shortfills\u003c\/strong\u003e\u003c\/a\u003e for direct lung. Browse our \u003c\/span\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/e-liquids\" title=\"E-Liquids Collection\" target=\"_blank\"\u003eE-Liquids Collection\u003c\/a\u003e\u003c\/strong\u003e\u003cspan\u003e at \u003cstrong\u003ePirate Vapes\u003c\/strong\u003e for juice that matches your setup.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eHow to Set Up the Voopoo RTA 2ml Replacement Pod Tank \u003c\/span\u003e\u003c\/h2\u003e\n\u003col\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eUnscrew the hex screws on both posts using the included Allen key.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eInsert your coil leads into the post terminals, one leg per side, and tighten the screws firmly from the top.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eTrim any excess wire flush with the posts using wire cutters.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eThread your cotton wick through the coil and tuck the tails into the juice wells on either side. Do not pack too tightly or leave gaps.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eFlip the pod over, pull back the silicone stopper on the bottom fill port, and add up to 2ml of e-liquid.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003ePress the stopper back firmly and let the pod sit upright for five minutes. Give the cotton time to saturate fully before firing.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eClick the pod onto your Drag X, Drag S, or any PnP-compatible device. The magnet grabs it.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eStart at a low wattage and work up gradually. Adjust the bottom airflow ring tighter or looser to taste.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eWhat's in the Voopoo RTA 2ml Replacement Pod Tank Box\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003e1 x Voopoo RTA Pod 2 x Spare Hex Screws 1 x 0.2Ω Pre-wrapped Wire Coil 1 x Organic Cotton 1 x Hexagon Wrench (Allen Key) 1 x User Manual\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eNo device, no e-liquid, no 510 adapter. You get the pod and everything needed for your first build.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eBuilt for the Voopoo Drag X, Drag S, and PnP Platform\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe \u003cstrong\u003eVoopoo RTA Pod Tank\u003c\/strong\u003e is designed for\u003cstrong\u003e Voopoo's PnP pod \u003c\/strong\u003esystem. It clicks magnetically onto PnP-compatible devices, including the Drag X and Drag S. If you own a PnP-platform device, this pod fits without adapters or modifications. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eFor vapers running a standard 510 box mod, \u003cstrong\u003eVoopoo's PnP Pod Tank\u003c\/strong\u003e Base (sold separately) converts the magnetic connection to a standard 510 thread, allowing the pod to be used with a wide variety of compatible mods and opening up versatility for advanced vapers who run multiple setups. Check our \u003c\/span\u003e\u003ca title=\"Vape Kits\" href=\"https:\/\/piratevapes.co.uk\/collections\/vape-kits\" target=\"_blank\"\u003e\u003cstrong\u003eVape Kits\u003c\/strong\u003e\u003c\/a\u003e\u003cspan\u003e collection at \u003cstrong\u003ePirate Vapes\u003c\/strong\u003e for compatible \u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/voopoo-vapes\" target=\"_blank\" title=\"Voopoo Devices\" rel=\"noopener\"\u003e\u003cstrong\u003eVoopoo Devices\u003c\/strong\u003e\u003c\/a\u003e. \u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eAbout Voopoo\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eVoopoo launched the original Drag mod and turned it into one of the most recognised names in UK vaping. The GENE chipset inside their devices became a talking point for firing speed and wattage accuracy. Since then, Voopoo has pushed the\u003cstrong\u003e PnP platform across pods\u003c\/strong\u003e, tanks, and now rebuildable atomisers, keeping the same magnetic connection running through everything. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eVoopoo is often preferred by vapers for its user-friendly designs, adjustable airflow systems, and reliable magnetic pod connections. The \u003cstrong\u003eRTA Pod Tank\u003c\/strong\u003e is a solid example of that approach. Same click-on design, same device compatibility, but with a built-in deck for vapers who want full coil control.  \u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eStock Up and Save\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eBecause the deck is rebuildable, you only replace the wire and cotton rather than an entire coil head. That makes the \u003cstrong\u003eRTA pod\u003c\/strong\u003e a longer-lasting investment than pre-built options. Its compact 26mm diameter also means it is lightweight and portable, making it a practical choice for vapers who are always on the move. Still worth keeping a spare pod on hand for when you want to swap builds or run two different juices. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eEvery Voopoo RTA Pod Tank sold through \u003c\/span\u003e\u003cstrong\u003ePirate Vapes\u003c\/strong\u003e\u003cspan\u003e is genuine, shipped in protective packaging, and dispatched with tracked UK delivery. Checkout is age-verified and restricted to customers aged 18 and over, with all products TPD-compliant and MHRA-notified. Free Pirate Post kicks in on orders over £25. \u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eConclusion\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe \u003cstrong\u003eVoopoo RTA 2ml Replacement Pod Tank\u003c\/strong\u003e puts a proper rebuildable deck inside the \u003cstrong\u003ePnP magnetic pod\u003c\/strong\u003e system. You get full control over your coil, your wick, and your airflow without giving up the convenience of Voopoo's click-on pod design. Dual-post deck, fully adjustable bottom airflow, stainless steel build, with the flexibility and customisation that rebuildable users often prefer over pre-made coil heads. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eWhether you are a seasoned builder or just getting started with rebuildables, this pod strikes a balance between simplicity and advanced capability. If you already own a \u003cstrong\u003eDrag X or Drag S\u003c\/strong\u003e and want that level of control, this pod does the job. Grab yours from \u003cstrong\u003ePirate Vapes \u003c\/strong\u003ewith same-day dispatch before 4 pm and fast UK delivery. \u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eFAQs\u003c\/span\u003e\u003c\/h2\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eDoes this fit the Drag X or Drag S?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eYes. It connects magnetically to Voopoo PnP-compatible devices, including the Drag X and Drag S. Check that your device supports PnP pods before ordering.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eDo I need to buy coils separately?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eA 0.2Ω pre-wrapped wire coil and organic cotton come in the box for your first build. After that, you wrap your own coils using wire and cotton of your choice.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eCan I use this on a 510 mod?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eYes, but you need Voopoo's PnP Pod Tank Base or a 510 adapter, sold separately. With the optional base fitted, the pod can be used with a wide range of compatible 510-threaded box mods. Without it, the pod only fits PnP devices magnetically.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eWhat resistance should I build?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe deck handles a wide range. A 0.8 to 1.2Ω build suits a more restricted draw on nic salts. For direct lung, aim for 0.2 to 0.5Ω on a shortfill. Stay within your device's and battery's supported resistance range.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eIs the 2ml capacity enough?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eDepends on your vaping style. Restricted draws will get decent use from a full tank. Lower resistance builds burn through juice faster, so expect more frequent top-ups. The bottom fill port makes refilling quick.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eWhat e-liquid works best with this tank?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eNic salts and 50\/50 blends suit higher resistance builds. For lower resistance direct lung builds, 70\/30 VG\/PG shortfills work well. Avoid very thick max VG liquids in tight setups as the small juice channels may not keep up.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eDo RTA tanks leak?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eRTA tanks can leak if coils are not installed properly or the pod is overfilled. Ensuring proper coil positioning, tight seals, and avoiding overfilling help prevent leaks. The Voopoo RTA Pod includes a secure bottom-fill silicone stopper designed to minimise leaking when pressed back firmly after filling.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eWhat is the difference between an RTA and an RDA?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eAn RTA includes a built-in e-liquid reservoir, which means you fill it up and vape between refills without dripping. An RDA has no tank section and requires you to manually drip e-liquid onto the coil and cotton. RTAs offer a balance of convenience, flavour, and customisation, making them the more practical choice for daily use.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eCan I use this for MTL vaping?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eYes. The fully adjustable airflow system allows the Voopoo RTA Pod to support both mouth-to-lung and direct-lung vaping styles. For a tighter MTL draw, build a higher-resistance coil and close down the airflow ring.\u003c\/span\u003e\u003c\/p\u003e","brand":"VooPoo","offers":[{"title":"Black","offer_id":52544693797146,"sku":null,"price":13.99,"currency_code":"GBP","in_stock":true},{"title":"Stainless Steel","offer_id":52544693829914,"sku":null,"price":13.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0995\/5675\/3690\/files\/Voopoo_RTA_2ml_Replacement_Pod_Tank.jpg?v=1784377562"},{"product_id":"aspire-huracan-tank","title":"Aspire Huracan Sub-Ohm Vape Tank","description":"\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eAspire Huracan Sub-Ohm Tank\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eTwo \u003c\/span\u003e\u003cspan\u003eBP Meshed coils\u003c\/span\u003e\u003cspan\u003e, \u003c\/span\u003e\u003cspan\u003eadjustable top airflow\u003c\/span\u003e\u003cspan\u003e, and a quick-twist top-fill system built into a genuinely compact body. The \u003cstrong\u003eAspire Huracan\u003c\/strong\u003e pairs a\u003cstrong\u003e 0.15ohm mesh coil\u003c\/strong\u003e for warm, flavour-dense hits with a \u003cstrong\u003e0.3ohm coil \u003c\/strong\u003eoption for a slightly cooler draw, both wrapped in a stainless steel housing that fits comfortably on most regulated mods. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eUK stock ships at 2ml, fully \u003c\/span\u003e\u003cspan\u003eTPD-compliant\u003c\/span\u003e\u003cspan\u003e. That does not cost you anything in performance though. Flavour and vapour output stay exactly what \u003cstrong\u003eAspire’s mesh coil\u003c\/strong\u003e platform is known for. Good fit if clouds, sharp flavour, and a tank that will not leak all over your mod are what you are after. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eWhy vapers choose this:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eBetter flavour density\u003c\/span\u003e\u003cspan\u003e and a faster heat-up than older round-wire builds, thanks to the BP Meshed coil tech\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eSits flush \u003c\/span\u003e\u003cspan\u003eon most regulated box mods. No overhang, despite being a proper sub-ohm tank\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eTop airflow design\u003c\/span\u003e\u003cspan\u003e, so e-liquid stays locked inside rather than finding its way onto your mod\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eTwist the cap, fill, twist it shut. \u003c\/span\u003e\u003cspan\u003eRefilling takes seconds \u003c\/span\u003e\u003cspan\u003eand there is no mess\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eWide adjustment range on the airflow\u003c\/span\u003e\u003cspan\u003e, from a slightly restricted hit right through to big, open clouds\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eAspire Huracan Sub-Ohm Tank Features\u003c\/span\u003e\u003c\/h2\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eBP Meshed Coils, Built for Flavour and Speed\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe pre-installed 0.15ohm BP Meshed coil heats fast and delivers the kind of dense, layered flavour mesh coils are known for over older Kanthal round-wire builds. Fair enough if you have been burned by cheap mesh coils before, but Aspire's BP platform has a solid track record across their tank range, and the Huracan carries that same coil architecture.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eCompact Enough for Any Mod\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eSub-ohm tanks have a habit of dwarfing the mod underneath them. The Huracan avoids that. Its proportions keep it in scale with most single and dual-battery box mods, so you are not left with an awkward top-heavy setup that tips over on a table.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eTailored Sub-Ohm Performance \u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eSwap between the two included coils to shift the Huracan's performance to your liking. The pre-installed 0.15ohm coil is built for maximum vapour and warmth at higher wattages, while the spare 0.3ohm coil lets you tone things down for a cooler, more restricted sub-ohm vape. It is worth trying both to see which wattage range gives you your perfect sweet spot. \u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eTwist-to-Fill, No Fuss \u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eUnscrew the top cap to reveal the wide fill ports, add your e-liquid, and twist it back into place. It keeps everything tightly sealed without the risk of loose sliding mechanism leaks. It is one of the cleaner fill systems on the market, and it becomes second nature after the first couple of refills.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eAirflow You Can Actually Feel the Difference In\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe adjustable airflow control has a real range to it. Closed down, the draw tightens and flavour intensifies. Opened up, vapour production increases noticeably. Because the airflow intakes are at the top of the tank rather than the bottom, it is virtually leak-proof, keeping your mod dry. \u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eHow to Set Up the Aspire Huracan Sub-Ohm Tank\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eQuick swap and refill process. A few minutes from unboxing to first draw.\u003c\/span\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eAttach the tank\u003c\/span\u003e\u003cspan\u003e to your mod by aligning the 510 connection and screwing down until snug.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eTwist the top cap open \u003c\/span\u003e\u003cspan\u003eto expose the fill ports.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eAdd e-liquid\u003c\/span\u003e\u003cspan\u003e, keeping clear of the central airflow tube, and fill to just below the max line.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eTwist the top cap back on \u003c\/span\u003e\u003cspan\u003efirmly to seal the tank before firing.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eLet the coil sit for around five minutes\u003c\/span\u003e\u003cspan\u003e before your first draw, giving the mesh time to fully saturate.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eAdjust the top airflow ring \u003c\/span\u003e\u003cspan\u003eto your preferred draw, then start vaping at the coil's recommended wattage and increase gradually.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eWhat's in the Aspire Huracan Sub-Ohm Tank Box\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eOne Huracan tank with a BP Meshed coil pre-installed, a second BP Meshed coil for an alternate wattage range, a spare glass tube, a pack of O-rings, and a user manual. No mod, no e-liquid, no charger included.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eBuilt for 510 Mods, Pure DTL Vaping \u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe Huracan connects via standard 510 threading, so it fits the overwhelming majority of regulated box mods on the market. It is built strictly for\u003cstrong\u003e Direct-to-Lung (DTL) Vaping\u003c\/strong\u003e, running beautifully at higher wattages depending on which included coil you have fitted. It is not designed for mechanical mods or low-powered pod devices, and running it well outside the coil's rated range will shorten coil life quickly. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eIf you already run other \u003c\/span\u003e\u003cstrong\u003eAspire\u003c\/strong\u003e\u003cspan\u003e\u003cstrong\u003e Coils\u003c\/strong\u003e and want something that shares the same broader ecosystem, the Huracan is a natural fit.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eAbout Aspire\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eAspire has been a fixture in UK vaping hardware for years, known for building tanks that prioritise reliable performance over gimmicks. The BP Meshed coil platform used in the Huracan has already proven itself across several other \u003cstrong\u003eAspire Tanks\u003c\/strong\u003e, and the Huracan applies that same coil technology to a genuinely compact sub-ohm design. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eIt reflects Aspire's broader approach: solid engineering, dependable coils, and hardware built to be repaired and refilled rather than replaced.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eStock Up and Save\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eMesh coils on \u003cstrong\u003esub-ohm tanks\u003c\/strong\u003e tend to wear faster than MTL coils simply because they run at higher wattage more of the time. Picking up a spare pack alongside the tank means flavour stays sharp instead of fading out mid-week. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eEvery order from \u003c\/span\u003e\u003cstrong\u003ePirate Vapes\u003c\/strong\u003e\u003cspan\u003e\u003cstrong\u003e \u003c\/strong\u003eships the same day before 4pm, with a fully age-verified checkout throughout. All stock is TPD compliant and restricted to over-18s only. Spend over £25 and delivery is free with Free Pirate Post.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eConclusion\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe Huracan gives you genuine sub-ohm performance in a tank that does not overwhelm your mod. The \u003cstrong\u003eBP Meshed coils\u003c\/strong\u003e handle high-wattage vaping convincingly, and the top-fill system keeps things clean. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eIf you want a tank that delivers excellent flavor without leaking all over your mod, the Huracan is worth a look. Browse the full\u003cstrong\u003e \u003c\/strong\u003e\u003c\/span\u003e\u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/vape-tanks\" target=\"_blank\" title=\"Vape Tanks\" rel=\"noopener\"\u003e\u003cstrong\u003eVape Tanks\u003c\/strong\u003e\u003c\/a\u003e\u003cspan\u003e range, pick up spare \u003c\/span\u003e\u003cspan\u003evape coils\u003c\/span\u003e\u003cspan\u003e, and check everything else out at \u003c\/span\u003e\u003cspan\u003e\u003cstrong\u003ePirate Vapes\u003c\/strong\u003e\u003c\/span\u003e\u003cspan\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eFAQs\u003c\/span\u003e\u003c\/h2\u003e\n\u003ch3 dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eIs the Huracan suitable for beginners?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eIt is best suited for vapers who are already comfortable with sub-ohm setups, high-wattage vaping, and thick, high-VG e-liquids. It isn't ideal as a first-ever vape kit.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eCan I use nic salts in this tank?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eDefinitely not recommended. The BP Meshed coils push a lot of power (up to 80W). Vaping high-strength nic salts at those wattages will deliver far too much nicotine at once and feel incredibly harsh on your throat. Stick to freebase high-VG shortfills. \u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eHow do I adjust the draw?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eYou can tune the vape by rotating the airflow control ring at the top of the tank. Closing it down slightly will give you a warmer, more restricted DTL draw, while opening it up wide gives you maximum airflow and huge clouds.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eHow often do the coils need replacing?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eTypically every one to two weeks with regular use, depending on how often you vape and which e-liquid you run.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eWhat mods is this tank compatible with?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eAny device with a standard \u003c\/span\u003e\u003cspan\u003e510 connection\u003c\/span\u003e\u003cspan\u003e and variable wattage control suited to sub-ohm coils.\u003c\/span\u003e\u003c\/p\u003e","brand":"Aspire","offers":[{"title":"Default Title","offer_id":52553439314202,"sku":null,"price":23.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0995\/5675\/3690\/files\/Aspire_Huracan_Sub-Ohm_Tank.jpg?v=1784554447"}],"url":"https:\/\/piratevapes.co.uk\/collections\/mtl-tanks.oembed","provider":"Pirate Vapes","version":"1.0","type":"link"}