{"product_id":"freemax-fireluke-2-tx-coils","title":"FreeMax Fireluke 2 TX Replacement Coils","description":"\u003ch2\u003eFreeMax Fireluke 2 TX Coils\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eFreeMax Fireluke 2 TX Coils\u003c\/strong\u003e are mesh replacement coils with a 90% tea tree fibre wick, supplied in packs of 5 for the \u003cstrong\u003eFireluke 2 sub-ohm tank\u003c\/strong\u003e. Six builds are offered between 0.12ohm and 0.5ohm, from single mesh up to quad mesh.\u003c\/p\u003e\n\u003cp\u003eEvery build is a sub-ohm design intended for a direct-to-lung draw on thick, high-VG liquid, with rated power running from 20W to 90W depending on the build. Flavour is what the mesh and wick pairing is aimed at, and only the coil is replaced, so the tank stays in use for the next change.\u003c\/p\u003e\n\u003ch3\u003eWhat to Know About the Fireluke 2 TX Coils\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e5 coils in every pack, all in the build selected\u003c\/li\u003e\n\u003cli\u003eSix builds from 0.12ohm to 0.5ohm\u003c\/li\u003e\n\u003cli\u003e90% tea tree fibre and 10% organic cotton wicking\u003c\/li\u003e\n\u003cli\u003eDirect-to-lung coils for high-VG e-liquid\u003c\/li\u003e\n\u003cli\u003eFits the Fireluke 2 and Fireluke M tanks, plus the Twister 80W kit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFeatures of FreeMax Fireluke 2 TX Coils\u003c\/h2\u003e\n\u003cp\u003eThe wick, the mesh and the range of builds are covered below. How evenly a coil heats, how well the wick is fed and how much power each build accepts are all decided by them.\u003c\/p\u003e\n\u003ch3\u003eTea Tree Fibre Wick\u003c\/h3\u003e\n\u003cp\u003eThe wick is a patented formulation of \u003cstrong\u003e90% tea tree fibre\u003c\/strong\u003e and \u003cstrong\u003e10% organic cotton\u003c\/strong\u003e, derived from natural tea tree products. It is held tight against the mesh. The same wicking is used across the whole TX and TNX range, from the 0.12ohm build to the 0.5ohm build.\u003c\/p\u003e\n\u003ch3\u003eLaser-Cut Kanthal Mesh\u003c\/h3\u003e\n\u003cp\u003eEach \u003cstrong\u003eFireluke 2 mesh coil\u003c\/strong\u003e is precision laser cut from a customised \u003cstrong\u003eKanthal\u003c\/strong\u003e mesh plate. A honeycomb pattern is used, which FreeMax rates for instant, even heating, and the wick is fitted closely against it.\u003c\/p\u003e\n\u003ch3\u003eSingle to Quad Mesh Builds\u003c\/h3\u003e\n\u003cp\u003eThe TX1 uses a single mesh, the TX2 and TNX2 use double mesh, the TX3 has a triple mesh and the TX4 has a quad mesh. Ratings differ with each structure. The triple-mesh TX3 is rated at 50W to 90W, while the double-mesh 0.5ohm TNX2 is rated at 20W to 50W.\u003c\/p\u003e\n\u003ch3\u003eTX1 SS316L Temperature Control\u003c\/h3\u003e\n\u003cp\u003eThe TX1 SS316L is the only \u003cstrong\u003estainless steel\u003c\/strong\u003e build in the range. At 0.12ohm it is set by temperature instead of wattage, across 400°F to 550°F, with 500°F recommended. The other five builds use Kanthal mesh.\u003c\/p\u003e\n\u003ch3\u003eHigh-VG Direct-to-Lung Draw\u003c\/h3\u003e\n\u003cp\u003eSub-ohm coils like these are built for a loose, direct-to-lung draw, and thinner high-VG liquid keeps the wick fed. That draw style is matched by bottles from the \u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/high-vg-e-liquid\" title=\"High VG E-Liquid\" rel=\"noopener\" target=\"_blank\"\u003e\u003cstrong\u003eHigh VG E-Liquid\u003c\/strong\u003e\u003c\/a\u003e range, and Fireluke TX coils can be chosen by resistance to suit the liquid.\u003c\/p\u003e\n\u003ch2\u003eFireluke 2 TX Coil Resistance Options\u003c\/h2\u003e\n\u003cp\u003eSix TX mesh builds are offered, each supplied as a pack of 5.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e#buttons\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTNX2 Mesh 0.5 Ohm\u003c\/li\u003e\n\u003cli\u003eTX1 Mesh 0.15 Ohm\u003c\/li\u003e\n\u003cli\u003eTX1 SS316L 0.12 Ohm\u003c\/li\u003e\n\u003cli\u003eTX2 Mesh 0.2 Ohm\u003c\/li\u003e\n\u003cli\u003eTX3 Mesh 0.15 Ohm\u003c\/li\u003e\n\u003cli\u003eTX4 Mesh 0.15 Ohm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eHow to Fit the Fireluke 2 TX Coils\u003c\/h2\u003e\n\u003cp\u003eA coil change happens at the bottom of the tank, and the wick has to be wet before the first draw.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStep 1:\u003c\/strong\u003e Empty the tank of e-liquid and remove it from the mod.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStep 2:\u003c\/strong\u003e Take the base off the glass, then draw the worn coil out of it and bin it.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStep 3:\u003c\/strong\u003e Saturate the cotton of the new coil with e-liquid through its wicking openings.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStep 4:\u003c\/strong\u003e Seat the coil in the base until it sits snugly, then reassemble the tank.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStep 5:\u003c\/strong\u003e Add high-VG e-liquid to the tank, then leave it standing upright for a short while so the cotton absorbs it.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStep 6:\u003c\/strong\u003e Put the tank back on the mod and begin near the bottom of the build's rated range. Power is raised in small steps until the flavour settles.\u003c\/p\u003e\n\u003ch2\u003eWhat's in the FreeMax Fireluke 2 TX Coils Pack\u003c\/h2\u003e\n\u003cp\u003eEvery pack has the same contents, whichever build is selected.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e5 mesh coils\u003c\/strong\u003e in the selected build\u003c\/li\u003e\n\u003cli\u003eOne build per pack, so a second build is bought as a separate pack\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNo tank, mod, battery or e-liquid is included.\u003c\/p\u003e\n\u003ch2\u003eDevices Compatible With the Fireluke 2 TX Coils\u003c\/h2\u003e\n\u003cp\u003eThese coils fit the \u003cstrong\u003eFireluke 2\u003c\/strong\u003e tank, which is supplied with the \u003cstrong\u003eTwister 80W\u003c\/strong\u003e kit, and the \u003cstrong\u003eFireluke M\u003c\/strong\u003e tank. All six builds can be used in either tank, so buyers searching for Twister 80W coils or Fireluke 2 tank coils will find the same range here.\u003c\/p\u003e\n\u003cp\u003eThe Fireluke 22, Fireluke Solo and Mesh Pro tanks are named in a similar way but use their own coil ranges, so TX coils are not fitted to them. The tank name should be compared with the list above before ordering, and matching tanks are gathered by Pirate Vapes in \u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/vape-tanks\" title=\"Vape Tanks\" rel=\"noopener\" target=\"_blank\"\u003e\u003cstrong\u003eVape Tanks\u003c\/strong\u003e\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eAbout FreeMax and the Fireluke 2 Platform\u003c\/h2\u003e\n\u003cp\u003eFreeMax describes the Fireluke 2 as the follow-up to the Fireluke M, and the TX1, TX2, TNX2, TX3 and TX4 mesh coils are its headline change. Slide-to-open top fill and 360-degree e-liquid feeding are paired with the tea tree fibre wick found in every coil here.\u003c\/p\u003e\n\u003cp\u003eThe Twister 80W starter kit combines the tank with a 5W to 80W variable-wattage tube mod, and FreeMax states that the Fireluke 2 balances vapour and flavour between 40W and 90W. More coil families are gathered in the \u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/freemax-coils\" title=\"Freemax Coils\" rel=\"noopener\" target=\"_blank\"\u003e\u003cstrong\u003eFreemax Coils\u003c\/strong\u003e\u003c\/a\u003e range.\u003c\/p\u003e\n\u003ch2\u003eStock Up on the Fireluke 2 TX Coils\u003c\/h2\u003e\n\u003cp\u003eKeeping two builds on hand, for instance a 0.2ohm TX2 next to a 0.15ohm TX3, covers two power settings, and thick high-VG liquid belongs in the same basket.\u003c\/p\u003e\n\u003cp\u003eFree Pirate Post is applied to orders over £40. \u003cstrong\u003ePirate Vapes\u003c\/strong\u003e dispatches orders placed before 3:30pm on the same day, Monday to Friday, while weekend and bank holiday orders are sent the next working day. Age is verified at checkout, and only adults aged 18 and over can buy.\u003c\/p\u003e\n\u003ch2\u003eConclusion\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eFireluke 2 TX Coils\u003c\/strong\u003e suit anyone running a\u003cstrong\u003e Fireluke 2, Fireluke M \u003c\/strong\u003eor \u003cstrong\u003eTwister 80W\u003c\/strong\u003e who wants a like-for-like replacement, with six builds spanning low-power and high-power settings.\u003c\/p\u003e\n\u003cp\u003eSpares and other hardware are found in \u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/vape-accessories\" title=\"Vape Accessories\" rel=\"noopener\" target=\"_blank\"\u003e\u003cstrong\u003eVape Accessories\u003c\/strong\u003e\u003c\/a\u003e, and the full range sits at \u003cstrong\u003ePirate Vapes\u003c\/strong\u003e. Sales are restricted to over-18s.\u003c\/p\u003e\n\u003ch2\u003eFAQs\u003c\/h2\u003e\n\u003ch3\u003eWhich tanks do the FreeMax Fireluke 2 TX Coils fit?\u003c\/h3\u003e\n\u003cp\u003eAll six builds fit two tanks: the Fireluke 2 and the Fireluke M. Twister 80W owners are covered too, because that kit ships with the Fireluke 2 tank.\u003c\/p\u003e\n\u003ch3\u003eWhich resistance should I pick for Fireluke 2 coils?\u003c\/h3\u003e\n\u003cp\u003eThe choice follows the power the mod is set to. TNX2 at 0.5ohm is rated for 20W to 50W, TX2 at 0.2ohm for 40W to 80W, and the three 0.15ohm builds together cover 40W to 90W.\u003c\/p\u003e\n\u003ch3\u003eWhat e-liquid suits the Fireluke 2 TX Coils?\u003c\/h3\u003e\n\u003cp\u003eSub-ohm coils are built for a direct-to-lung draw, so a high-VG e-liquid is the usual choice. Thinner, lower-VG liquid can struggle to feed the wick at higher power.\u003c\/p\u003e\n\u003ch3\u003eHow many coils come in a pack of the Fireluke 2 TX Coils?\u003c\/h3\u003e\n\u003cp\u003eEach pack holds five coils, all in the same build. A different resistance or mesh type is bought as a separate pack.\u003c\/p\u003e\n\u003ch3\u003eDo the Fireluke 2 TX Coils need priming?\u003c\/h3\u003e\n\u003cp\u003ePriming is needed before the first draw. The cotton is wetted with e-liquid, the tank is filled and left to stand briefly, and the mod starts near the bottom of the rating for that build.\u003c\/p\u003e\n\u003ch3\u003eHow does the TX1 SS316L differ from the other Fireluke 2 TX Coils?\u003c\/h3\u003e\n\u003cp\u003eThe TX1 SS316L uses stainless steel mesh at 0.12ohm and is rated by temperature, from 400°F to 550°F. Kanthal mesh is used in the other five builds, which are rated in watts.\u003c\/p\u003e","brand":"FreeMax","offers":[{"title":"TNX2 Mesh 0.5 Ohm","offer_id":52941915914522,"sku":null,"price":11.99,"currency_code":"GBP","in_stock":true},{"title":"TX1 Mesh 0.15 Ohm","offer_id":52941915947290,"sku":null,"price":11.99,"currency_code":"GBP","in_stock":true},{"title":"TX1 SS316L 0.12 Ohm","offer_id":52941915980058,"sku":null,"price":11.99,"currency_code":"GBP","in_stock":true},{"title":"TX2 Mesh 0.2 Ohm","offer_id":52941916012826,"sku":null,"price":11.99,"currency_code":"GBP","in_stock":true},{"title":"TX3 Mesh 0.15 Ohm","offer_id":52941916045594,"sku":null,"price":11.99,"currency_code":"GBP","in_stock":true},{"title":"TX4 Mesh 0.15 Ohm","offer_id":52941916078362,"sku":null,"price":11.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0995\/5675\/3690\/files\/FreeMax_Fireluke_2_TX_Coils.jpg?v=1790578337","url":"https:\/\/piratevapes.co.uk\/products\/freemax-fireluke-2-tx-coils","provider":"Pirate Vapes","version":"1.0","type":"link"}