{"product_id":"freemax-fireluke-22-replacement-coils","title":"Freemax Fireluke 22 Replacement Coils","description":"\u003ch2\u003eFreemax Fireluke 22 Replacement Coils\u003c\/h2\u003e\n\u003cp\u003eOne coil family, two vaping styles. The \u003cstrong\u003eFreemax Fireluke 22\u003c\/strong\u003e coils cover both \u003cstrong\u003eMTL\u003c\/strong\u003e and \u003cstrong\u003eDTL\u003c\/strong\u003e from a single tank, which is rarer than it sounds. Each head runs an \u003cstrong\u003eSS904L mesh\u003c\/strong\u003e element built on Freemax's \u003cstrong\u003eCoilTech 4.0\u003c\/strong\u003e, with a \u003cstrong\u003etea fibre\u003c\/strong\u003e wick underneath for clean, full flavour.\u003c\/p\u003e\n\u003cp\u003eThree resistances in the range: a \u003cstrong\u003e0.5ohm\u003c\/strong\u003e for warmer sub-ohm draws, plus a \u003cstrong\u003e1.0ohm\u003c\/strong\u003e and a \u003cstrong\u003e1.5ohm\u003c\/strong\u003e for tighter mouth-to-lung puffs. They press straight into the \u003cstrong\u003eFireluke 22 tank\u003c\/strong\u003e, take freebase or salt nicotine, and come five to a pack. Straightforward, flexible replacement \u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/vape-coils\" target=\"_blank\" title=\"Vape Coils\" rel=\"noopener\"\u003e\u003cstrong\u003eVape Coils\u003c\/strong\u003e\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy vapers choose these:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eThree resistances, one tank. The 0.5ohm does airy sub-ohm draws while the 1.0ohm and 1.5ohm handle mouth-to-lung, so you are not locked into a single style.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eSS904L mesh heats fast and evenly, which is the difference between clean flavour and a burnt top note.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eTea fibre wicking holds up well against sweeter liquids.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003ePress-fit, so a coil change takes seconds.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eFive to a pack, which at typical daily use is roughly a month or so of vaping.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFreemax Fireluke 22 Coils Features\u003c\/h2\u003e\n\u003ch3\u003eSS904L Mesh Is the Headline\u003c\/h3\u003e\n\u003cp\u003eFreemax builds these on \u003cstrong\u003eSS904L\u003c\/strong\u003e, a stainless steel it picked for stability and durability under heat. The mesh format spreads current across a wide surface rather than a single wire, so the coil ramps up quickly and vaporises liquid evenly. In practice, that means \u003cstrong\u003ebolder flavour from the first few pulls\u003c\/strong\u003e and less of the harshness you get from a hot spot on an older round-wire coil.\u003c\/p\u003e\n\u003ch3\u003eTea Fibre, Not Just Cotton\u003c\/h3\u003e\n\u003cp\u003eUnder the mesh sits Freemax's \u003cstrong\u003etea fibre wick\u003c\/strong\u003e. It draws liquid steadily and copes better than plain cotton with the sugary dessert and fruit liquids that usually gunk a coil early. You still get a cleaner taste towards the end of the coil's life, which is the bit most people notice. Small detail, real difference.\u003c\/p\u003e\n\u003ch3\u003eWhy Does Resistance Choice Matter?\u003c\/h3\u003e\n\u003cp\u003eBecause it changes everything about the draw. The \u003cstrong\u003e0.5ohm\u003c\/strong\u003e wants a bit of power and thicker \u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/high-vg-e-liquid\" target=\"_blank\" title=\"High VG E-Liquid\" rel=\"noopener\"\u003e\u003cstrong\u003eHigh VG E-Liquid\u003c\/strong\u003e\u003c\/a\u003e for warm, cloudy DTL hits. Step up to the \u003cstrong\u003e1.0ohm\u003c\/strong\u003e or \u003cstrong\u003e1.5ohm,\u003c\/strong\u003e and you get a tight, cool MTL pull that suits \u003cstrong\u003eNic Salts\u003c\/strong\u003e and a more cigarette-like style. Same tank, two very different experiences.\u003c\/p\u003e\n\u003ch3\u003ePush It In, Done\u003c\/h3\u003e\n\u003cp\u003eInstallation is \u003cstrong\u003epress-fit\u003c\/strong\u003e. No threading, no fiddly alignment. You seat the old coil out of the base and push a fresh one in until it clicks home. Prime it, fill, and you are away. Anyone who has wrestled with screw-in heads will appreciate how quick this is.\u003c\/p\u003e\n\u003ch3\u003eFreebase or Salt, Your Call\u003c\/h3\u003e\n\u003cp\u003eThese coils do not mind which nicotine you run. The \u003cstrong\u003e0.5ohm\u003c\/strong\u003e pairs best with lower-strength freebase or a balanced \u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/50-50-e-liquids\" target=\"_blank\" title=\"50\/50 E-Liquid\" rel=\"noopener\"\u003e\u003cstrong\u003e50\/50 E-Liquid\u003c\/strong\u003e\u003c\/a\u003e, while the higher-ohm heads take salts up to \u003cstrong\u003e20mg\u003c\/strong\u003e comfortably. Match the liquid to the coil and both last longer.\u003c\/p\u003e\n\u003ch2\u003eFreemax Fireluke 22 Coils Resistance Options\u003c\/h2\u003e\n\u003cp\u003eThree heads in the range, covering both ends of the draw. The choice comes down to how you like to vape.\u003c\/p\u003e\n\u003cp\u003eMost popular is the \u003cstrong\u003e0.5ohm\u003c\/strong\u003e. It is a single mesh DTL head that sits happily in the \u003cstrong\u003e15 to 30W\u003c\/strong\u003e band and tastes its best around \u003cstrong\u003e25W\u003c\/strong\u003e. Warm vapour, plenty of it, and a good all-rounder for anyone leaning towards sub-ohm with higher-VG juice.\u003c\/p\u003e\n\u003cp\u003eFor a tighter draw, the \u003cstrong\u003e1.0ohm\u003c\/strong\u003e is the middle option. A mouth-to-lung head rated \u003cstrong\u003e10 to 15W\u003c\/strong\u003e and sweetest near \u003cstrong\u003e12.5W\u003c\/strong\u003e, it suits mid-strength salts and a restricted pull without going full sub-ohm.\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003e1.5ohm\u003c\/strong\u003e is the tightest of the three. Rated \u003cstrong\u003e8 to 12W\u003c\/strong\u003e and best around \u003cstrong\u003e10W\u003c\/strong\u003e, it is the closest to a proper cigarette-style draw and pairs well with stronger \u003cstrong\u003e20mg salts\u003c\/strong\u003e for a firm, satisfying hit.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e#buttons\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e0.5ohm\u003c\/li\u003e\n\u003cli\u003e1.0ohm\u003c\/li\u003e\n\u003cli\u003e1.5ohm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eHow to Set Up the Freemax Fireluke 22 Coils\u003c\/h2\u003e\n\u003cp\u003eQuick swap, then a bit of patience.\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cp\u003eEmpty the tank or remove it from the mod so no liquid escapes while you work.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eUnscrew the base and pull the old coil out of its housing.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eDrip three or four drops of e-liquid onto the cotton ports around the side of the new coil, then a drop down the centre.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003ePush the fresh coil firmly into the base until it seats, and screw the base back on.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eFill the tank, then stand it upright and let it drink for a good eight minutes so the mesh saturates fully. Skip this and the first pull tastes scorched, permanently.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eStart below the rated range and step the wattage up until the draw feels right for the resistance.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2\u003eWhat's in the Freemax Fireluke 22 Coils Box\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eFive coils\u003c\/strong\u003e in your chosen resistance. That is the lot: no tank, no e-liquid, no tools. These are replacement heads for a tank you already own, so make sure the one you pick matches your vaping style before you order.\u003c\/p\u003e\n\u003cp\u003eSpare heads in a couple of resistances are always worth keeping, and both are stocked at \u003cstrong\u003ePirate Vapes\u003c\/strong\u003e.\u003c\/p\u003e\n\u003ch2\u003eMade for the Fireluke 22 Tank and Twister 30W Kit\u003c\/h2\u003e\n\u003cp\u003eThese coils are built for two homes: the \u003cstrong\u003eFreemax Fireluke 22 Sub-Ohm Tank\u003c\/strong\u003e and the \u003cstrong\u003eFreemax Twister 30W Kit\u003c\/strong\u003e. Drop any of the three resistances into either, and you are set. Because the tank is a sub-ohm platform, pair the lower-resistance head with one of the \u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/dtl-tanks\" target=\"_blank\" title=\"DTL Tanks\" rel=\"noopener\"\u003e\u003cstrong\u003eDTL Tanks\u003c\/strong\u003e\u003c\/a\u003e crowd's favourite high-VG liquids for the best clouds.\u003c\/p\u003e\n\u003cp\u003eWhat they will not fit: the \u003cstrong\u003eFireluke 2\u003c\/strong\u003e, the \u003cstrong\u003eFireluke M\u003c\/strong\u003e, or the \u003cstrong\u003eMesh Pro tanks\u003c\/strong\u003e. Those each run their own coil platform, so a 22 head will not seat in them. If your tank or kit does not specifically say Fireluke 22 or Twister 30W, these are not the coils for it. A spare tank tube is handy too, and you will find \u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/replacement-tank-glass\" target=\"_blank\" title=\"Replacement Tank Glass\" rel=\"noopener\"\u003e\u003cstrong\u003eReplacement Tank Glass\u003c\/strong\u003e\u003c\/a\u003e for common Freemax tanks easily enough.\u003c\/p\u003e\n\u003ch2\u003eAbout Freemax\u003c\/h2\u003e\n\u003cp\u003eFreemax made its name on mesh. The brand pushed early sub-ohm mesh tanks into the mainstream, and the Fireluke line has been its flagship tank family ever since. The \u003cstrong\u003eCoilTech 4.0\u003c\/strong\u003e and \u003cstrong\u003eSS904L\u003c\/strong\u003e mesh used in the Fireluke 22 heads are the current version of that work: a stainless steel chosen for durability, paired with a \u003cstrong\u003etea fibre wick\u003c\/strong\u003e tuned for flavour over raw cloud.\u003c\/p\u003e\n\u003cp\u003eIt is a coil range that has been iterated on for years rather than rushed out, and that shows in how consistently these perform.\u003c\/p\u003e\n\u003ch2\u003eStock Up and Save\u003c\/h2\u003e\n\u003cp\u003eCoils are a consumable. A single mesh head lasts most vapers \u003cstrong\u003eone to two weeks\u003c\/strong\u003e before the flavour drops off, and sweeter liquids sooner. Do the maths on a \u003cstrong\u003efive-pack\u003c\/strong\u003e, and that is roughly a month or two of vaping, which is why grabbing two packs at once makes sense: you are never caught out with a dead coil and no spare.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePirate Vapes\u003c\/strong\u003e dispatches every order the same day when it is placed before 4 pm, through an age-verified checkout, over 18s only, on TPD-compliant stock.\u003c\/p\u003e\n\u003ch2\u003eConclusion\u003c\/h2\u003e\n\u003cp\u003eThe Freemax Fireluke 22 coils are a smart, flexible replacement set: \u003cstrong\u003eSS904L mesh\u003c\/strong\u003e, \u003cstrong\u003etea fibre wicking\u003c\/strong\u003e, and three resistances that let one tank swing from warm DTL clouds to a tight MTL draw. Match the head to your liquid, prime it properly, and they deliver clean flavour for a good couple of weeks each.\u003c\/p\u003e\n\u003cp\u003eIf you run a \u003cstrong\u003eFireluke 22 tank \u003c\/strong\u003eor a\u003cstrong\u003e Twister 30W kit\u003c\/strong\u003e, these are the heads to keep in the drawer. Pick up a pack, plus any spare \u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/vape-accessories\" target=\"_blank\" title=\"Vape Accessories\" rel=\"noopener\"\u003e\u003cstrong\u003eVape Accessories\u003c\/strong\u003e\u003c\/a\u003e you need, at \u003cstrong\u003ePirate Vapes\u003c\/strong\u003e.\u003c\/p\u003e\n\u003ch2\u003eFAQs\u003c\/h2\u003e\n\u003ch3\u003eWhich tanks do the Fireluke 22 coils fit?\u003c\/h3\u003e\n\u003cp\u003eThe Freemax Fireluke 22 Sub-Ohm Tank and the Freemax Twister 30W Kit. They will not fit the Fireluke 2, Fireluke M, or Mesh Pro tanks, which use different coils.\u003c\/p\u003e\n\u003ch3\u003eWhat are the Fireluke 22 coils made of?\u003c\/h3\u003e\n\u003cp\u003eAn SS904L mesh heating element with a tea fibre cotton wick, using Freemax's CoilTech 4.0.\u003c\/p\u003e\n\u003ch3\u003eWhich resistance should I pick in the Fireluke 22 coils?\u003c\/h3\u003e\n\u003cp\u003eFor clouds and DTL, the 0.5ohm. For a tighter mouth-to-lung draw, the 1.0ohm or 1.5ohm. Higher resistance suits stronger nic salts.\u003c\/p\u003e\n\u003ch3\u003eCan I use nic salts with the Fireluke 22 coils?\u003c\/h3\u003e\n\u003cp\u003eYes. The 1.0ohm and 1.5ohm heads handle salts up to 20mg well. The 0.5ohm is better suited to lower-strength freebase or 50\/50.\u003c\/p\u003e\n\u003ch3\u003eHow long does a Fireluke 22 coil last?\u003c\/h3\u003e\n\u003cp\u003eUsually one to two weeks with daily use. Sweet, dark liquids shorten that as residue builds on the mesh faster.\u003c\/p\u003e\n\u003ch3\u003eHow many Fireluke 22 coils come in a pack?\u003c\/h3\u003e\n\u003cp\u003eThere are five Fireluke 22 coils in a pack.\u003c\/p\u003e","brand":"Freemax","offers":[{"title":"0.5 Ohm","offer_id":52755338559770,"sku":null,"price":8.99,"currency_code":"GBP","in_stock":true},{"title":"1.0 Ohm","offer_id":52755338592538,"sku":null,"price":8.99,"currency_code":"GBP","in_stock":true},{"title":"1.5 Ohm","offer_id":52755338625306,"sku":null,"price":8.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0995\/5675\/3690\/files\/Freemax_Fireluke_22_Replacement_Coils.jpg?v=1787983061","url":"https:\/\/piratevapes.co.uk\/products\/freemax-fireluke-22-replacement-coils","provider":"Pirate Vapes","version":"1.0","type":"link"}