{"product_id":"grape-mint-al-fakher-hypermax-prime-50k","title":"Grape Mint Al Fakher Hypermax Prime 50K Prefilled Pod Kit","description":"\u003ch2\u003eGrape Mint Al Fakher Hypermax Prime 50K Prefilled Pod Kit\u003c\/h2\u003e\n\u003cp\u003eTwo \u003cstrong\u003e10ml\u003c\/strong\u003e containers of grape and mint nicotine salt feed the \u003cstrong\u003eGrape Mint Al Fakher Hypermax Prime 50K Prefilled Pod Kit\u003c\/strong\u003e, a rechargeable kit with the strength set at \u003cstrong\u003e20mg\/ml\u003c\/strong\u003e. Short draws let the puff count reach up to \u003cstrong\u003e50,000\u003c\/strong\u003e, a figure shared across the module and both containers.\u003c\/p\u003e\n\u003cp\u003ePower is supplied by a \u003cstrong\u003e1000mAh\u003c\/strong\u003e battery, while the mesh coil sits in a swappable module. Single kits and bundles of 5 or 10 all carry the one flavour. Airflow is adjustable, the draw runs from restricted to open lung inhales, and no liquid is ever poured by hand.\u003c\/p\u003e\n\u003ch3\u003eWhat to Know About the Grape Mint Hypermax Prime 50K Kit\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFlavour is fixed at Grape Mint in every pack size\u003c\/li\u003e\n\u003cli\u003ePuff capacity reaches up to 50,000 across the module and both containers\u003c\/li\u003e\n\u003cli\u003eUSB-C Quick Charge 2.0 feeds a 1000mAh cell\u003c\/li\u003e\n\u003cli\u003eEvery container holds 20mg\/ml nicotine salt\u003c\/li\u003e\n\u003cli\u003eReplacements come from the Prime 50K refill range only\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFeatures of Grape Mint Al Fakher Hypermax Prime 50K Prefilled Pod Kit\u003c\/h2\u003e\n\u003cp\u003eFlavour, coil, liquid control, battery, and airflow are covered below in the order they come into play. Kits with similar ratings are found in \u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/big-puff-pod-kits\" title=\"Big Puff Pod Kits\" rel=\"noopener\" target=\"_blank\"\u003e\u003cstrong\u003eBig Puff Pod Kits\u003c\/strong\u003e\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eGrape Mint Flavour\u003c\/h3\u003e\n\u003cp\u003eDark Concord grape comes forward on the inhale, and spearmint follows it to leave the palate clean on the exhale. The device is finished in a royal purple colourway to match. One liquid is used in the module and in both containers, so the flavour does not shift as the containers run down.\u003c\/p\u003e\n\u003ch3\u003eSnap Dual Module With Mesh Coil\u003c\/h3\u003e\n\u003cp\u003eInside the \u003cstrong\u003eSnap Dual\u003c\/strong\u003e module sit the \u003cstrong\u003e2ml\u003c\/strong\u003e tank and the mesh coil, with the two \u003cstrong\u003e10ml\u003c\/strong\u003e containers clicking in on either side. Replacing the module therefore replaces the coil too, so coil fitting and priming never come up. \u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/prefilled-pod-kits\" title=\"Prefilled Pod Kits\" rel=\"noopener\" target=\"_blank\"\u003e\u003cstrong\u003ePrefilled Pod Kits\u003c\/strong\u003e\u003c\/a\u003e collects the kits that come with a filled module.\u003c\/p\u003e\n\u003ch3\u003eFlow Sense E-Liquid Control\u003c\/h3\u003e\n\u003cp\u003eLiquid is drawn from the two containers into the 2ml tank by the \u003cstrong\u003eFlow Sense\u003c\/strong\u003e system as the kit is used. The coil stays supplied through longer sessions, and draw length and airflow setting still decide how quickly the liquid goes. It all happens inside the module.\u003c\/p\u003e\n\u003ch3\u003e1000mAh Battery and USB-C Charging\u003c\/h3\u003e\n\u003cp\u003eCharging goes through a \u003cstrong\u003eUSB-C\u003c\/strong\u003e port with Quick Charge 2.0 support, into a built-in \u003cstrong\u003e1000mAh\u003c\/strong\u003e battery. A \u003cstrong\u003eSilk Glow\u003c\/strong\u003e LED screen shows the battery percentage and whether the pod is firing. No lead comes with the kit, so \u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/chargers-and-cables\" title=\"Chargers And Cables\" rel=\"noopener\" target=\"_blank\"\u003e\u003cstrong\u003eChargers And Cables\u003c\/strong\u003e\u003c\/a\u003e stocks suitable leads, and \u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/rechargeable-vapes\" title=\"Rechargeable Vapes\" rel=\"noopener\" target=\"_blank\"\u003e\u003cstrong\u003eRechargeable Vapes\u003c\/strong\u003e\u003c\/a\u003e shows comparable devices.\u003c\/p\u003e\n\u003ch3\u003eAdjustable Airflow and Draw Activation\u003c\/h3\u003e\n\u003cp\u003eA mechanical slide switch on the battery unit sets the airflow, moving the draw between restricted and open direct-to-lung. No button is present, since inhaling activates the kit. The wide mouthpiece suits lung inhales rather than a tight cigarette-style draw. Short draws are what the \u003cstrong\u003e50,000\u003c\/strong\u003e-puff ceiling assumes, and longer inhales use more liquid and lower the total.\u003c\/p\u003e\n\u003ch2\u003eHow to Set Up the Grape Mint Hypermax Prime 50K Kit\u003c\/h2\u003e\n\u003cp\u003eNothing is filled by hand, so setup comes down to assembling the module, giving the coil time to soak, and taking a gentle first draw.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStep 1:\u003c\/strong\u003e Unpack the battery, the module, and both containers, and remove the silicone bungs and seals from all of them.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStep 2:\u003c\/strong\u003e Push the two containers into the tracks on the module until each clicks flush.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStep 3:\u003c\/strong\u003e Dock the assembled module into the battery housing.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStep 4:\u003c\/strong\u003e Leave the assembled kit alone for 2 to 3 minutes so that liquid can reach the whole coil.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStep 5:\u003c\/strong\u003e Begin with light draws. The screen lights with each inhale, and the slide switch alters airflow.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStep 6:\u003c\/strong\u003e Charge through the USB-C port when the screen shows a low battery. When the containers run low, fit a new Prime 50K refill pack, which brings a fresh module and coil.\u003c\/p\u003e\n\u003ch2\u003eWhat's in the Grape Mint Hypermax Prime 50K Kit Box\u003c\/h2\u003e\n\u003cp\u003eOne complete kit contains the items below; the 5 and 10 packs repeat them.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1 x Hypermax Prime 50K battery (\u003cstrong\u003e1000mAh\u003c\/strong\u003e)\u003c\/li\u003e\n\u003cli\u003e1 x Snap Dual module with mesh coil built in\u003c\/li\u003e\n\u003cli\u003e2 x \u003cstrong\u003e10ml\u003c\/strong\u003e Grape Mint containers, prefilled\u003c\/li\u003e\n\u003cli\u003e1 x user manual\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot included:\u003c\/strong\u003e the \u003cstrong\u003eUSB-C cable\u003c\/strong\u003e, spare modules and refill packs, all of which must be bought separately.\u003c\/p\u003e\n\u003ch2\u003ePods Compatible With the Grape Mint Hypermax Prime 50K Kit\u003c\/h2\u003e\n\u003cp\u003eReplacement packs for this kit come from the \u003cstrong\u003ePrime 50K\u003c\/strong\u003e refill range, each holding one module and two 10ml containers. \u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/replacement-pods\" title=\"Replacement Pods\" rel=\"noopener\" target=\"_blank\"\u003e\u003cstrong\u003eReplacement Pods\u003c\/strong\u003e\u003c\/a\u003e lists refills for this device and others.\u003c\/p\u003e\n\u003cp\u003eHypermax 30K and Crown Bar systems belong to separate devices and do not interchange with it. The 30K series docks a single cartridge, whereas the Prime 50K needs the wider dual-bay Snap Dual chassis. Spares should carry the 50K name on the pack.\u003c\/p\u003e\n\u003ch2\u003eAbout Al Fakher and the Hypermax Prime Platform\u003c\/h2\u003e\n\u003cp\u003eThe Hypermax Prime platform from Al Fakher is divided into a long-lived battery and a replaceable module. Everything that touches the liquid is renewed with a refill pack, because the mesh coil, the Flow Sense system, and the link to the two containers are all carried by the module.\u003c\/p\u003e\n\u003cp\u003eGrape Mint is offered on this platform as both a complete kit and a refill pack. Further high-rated devices are found in \u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/big-puff-vapes\" title=\"Big Puff Vapes\" rel=\"noopener\" target=\"_blank\"\u003e\u003cstrong\u003eBig Puff Vapes\u003c\/strong\u003e\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eStock Up on the Hypermax Prime Grape Mint Kit\u003c\/h2\u003e\n\u003cp\u003eA single refill pack brings a new module plus a pair of containers, which makes it the natural companion once the first set is used up.\u003c\/p\u003e\n\u003cp\u003eSame-day dispatch by Tracked 24 applies to Monday to Friday orders that reach \u003cstrong\u003ePirate Vapes\u003c\/strong\u003e by 3:30 pm with age verification cleared. \u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/multi-buy-vapes\" title=\"Multi-Buy Vapes\" rel=\"noopener\" target=\"_blank\"\u003e\u003cstrong\u003eMulti-Buy Vapes\u003c\/strong\u003e\u003c\/a\u003e is the place to combine several kits, while checkout stays closed to anyone under 18.\u003c\/p\u003e\n\u003ch2\u003eConclusion\u003c\/h2\u003e\n\u003cp\u003eAdults who want one flavour in a big-puff kit will find this Grape Mint 50000 puff vape easy to run. The liquid is sealed in, the module is changed as one piece, and the kit meets TPD rules.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/vape-kits\" title=\"Vape Kits\" rel=\"noopener\" target=\"_blank\"\u003e\u003cstrong\u003eVape Kits\u003c\/strong\u003e\u003c\/a\u003e shows further devices, and \u003cstrong\u003ePirate Vapes\u003c\/strong\u003e stocks the matching refill packs.\u003c\/p\u003e\n\u003ch2\u003eFAQs\u003c\/h2\u003e\n\u003ch3\u003eHow many puffs does the Grape Mint Al Fakher 50k vape give?\u003c\/h3\u003e\n\u003cp\u003eShort draws across the module and both 10ml containers can reach up to 50,000 puffs. Longer or more frequent inhales bring the real total down.\u003c\/p\u003e\n\u003ch3\u003eWhat strength is the Grape Mint Hypermax Prime vape?\u003c\/h3\u003e\n\u003cp\u003eEach container holds 20mg\/ml nicotine salt, the most that UK rules allow. Because it contains nicotine, the kit may only be bought by people aged 18 or older.\u003c\/p\u003e\n\u003ch3\u003eWhich refill packs fit the Al Fakher Hypermax Prime 50K Grape Mint kit?\u003c\/h3\u003e\n\u003cp\u003ePrime 50K refill packs are the matching replacements, each combining one module with two 10ml containers. Hypermax 30K and Crown Bar pods do not fit, and a fresh coil arrives with every pack.\u003c\/p\u003e\n\u003ch3\u003eDoes the Grape Mint Hypermax Prime 50K kit have a button?\u003c\/h3\u003e\n\u003cp\u003eNo button is fitted. The kit starts when the mouthpiece is inhaled, and the Silk Glow screen shows the battery percentage. Airflow is adjusted with the slide switch on the battery unit.\u003c\/p\u003e\n\u003ch3\u003eHow is the Al Fakher Grape Mint vape charged?\u003c\/h3\u003e\n\u003cp\u003eA USB-C port with Quick Charge 2.0 recharges the built-in 1000mAh battery, with a lead bought on its own. One battery serves every module that is swapped in.\u003c\/p\u003e\n\u003ch3\u003eWhat is the difference between the Pack Of 1, Pack Of 5 and Pack Of 10 Grape Mint kits?\u003c\/h3\u003e\n\u003cp\u003eEach pack contains that many complete kits, so Pack Of 5 holds five batteries, five modules, and ten containers. The flavour is Grape Mint in all three sizes.\u003c\/p\u003e","brand":"Al Fakher","offers":[{"title":"Pack Of 1","offer_id":53229676986650,"sku":null,"price":11.99,"currency_code":"GBP","in_stock":true},{"title":"Pack Of 5","offer_id":53229677019418,"sku":null,"price":54.99,"currency_code":"GBP","in_stock":true},{"title":"Pack Of 10","offer_id":53229677052186,"sku":null,"price":105.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0995\/5675\/3690\/files\/Grape_Mint_Al_Fakher_Hypermax_Prime_50K_Prefilled_Pod_Kit.jpg?v=1793084448","url":"https:\/\/piratevapes.co.uk\/products\/grape-mint-al-fakher-hypermax-prime-50k","provider":"Pirate Vapes","version":"1.0","type":"link"}