{"product_id":"horizontech-sakerz-replacement-coils","title":"HorizonTech Sakerz Replacement Coils","description":"\u003ch2\u003eHorizonTech Sakerz Replacement Coils\u003c\/h2\u003e\n\u003cp\u003eThree mesh resistances, one press-fit fitting, sold in packs of three. The \u003cstrong\u003eHorizonTech Sakerz Replacement Coils\u003c\/strong\u003e cover the full draw range for the Sakerz sub-ohm tank, from the flavour-forward \u003cstrong\u003e0.17Ω 2-in-1 mesh\u003c\/strong\u003e through the cloud-heavy \u003cstrong\u003e0.16Ω\u003c\/strong\u003e down to the cooler, lower-power \u003cstrong\u003e0.4Ω\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eThese are \u003cstrong\u003edirect-to-lung (DTL)\u003c\/strong\u003e coils built for high-VG juice, and they drop straight in without any screwing about. If you run the Sakerz or Sakerz Master and your flavour has gone flat, a fresh set of \u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/horizontech-coils\" target=\"_blank\" title=\"HorizonTech Coils\" rel=\"noopener\"\u003e\u003cstrong\u003eHorizonTech Coils\u003c\/strong\u003e\u003c\/a\u003e is the fix. Every order from Pirate Vapes ships in plain, padded packaging.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy vapers choose this:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eThe 0.17Ω 2-in-1 mesh is the standout. Its dual-layer mesh spreads heat across a wider surface, which is why most Sakerz owners rate it as the best balance of taste and vapour in the range and treat it as their daily coil.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003ePress-fit fitting. No threads to cross, no fiddling. Push it in and go.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eThree resistances in one range so you can shift between denser clouds and a cooler, softer draw without changing tanks.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eBuilt for high-VG juice. Thicker liquids wick and vaporise properly here.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003ePacks of three keep a couple of spares in the drawer for when the flavour starts to fade.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eHorizonTech Sakerz Coils Features\u003c\/h2\u003e\n\u003ch3\u003eMesh and Wood Pulp Wicking\u003c\/h3\u003e\n\u003cp\u003eA \u003cstrong\u003emesh strip\u003c\/strong\u003e heats faster and more evenly than old-style wound wire, but the real secret here is the wicking. HorizonTech uses a signature \u003cstrong\u003ewood pulp and cotton blend\u003c\/strong\u003e that absorbs liquid incredibly fast. Across all three Sakerz resistances, this combination of mesh and wood pulp is what gives these coils their reputation with cloud chasers, delivering sharper flavour and thicker vapour from the first pull, especially when paired with a proper \u003cstrong\u003ehigh VG e-liquid\u003c\/strong\u003e.\u003c\/p\u003e\n\u003ch3\u003eEasy Press-Fit Replacement\u003c\/h3\u003e\n\u003cp\u003eEver cross-threaded a coil and killed the seal? \u003cstrong\u003ePress-fit\u003c\/strong\u003e removes that risk entirely. The coil pushes into the base of the tank and seats on its O-rings, so installation takes seconds and there is far less to get wrong. Honestly, once you have used a press-fit system, going back to screw-in coils feels like a chore.\u003c\/p\u003e\n\u003ch3\u003eThree Coil Options for Different Draws\u003c\/h3\u003e\n\u003cp\u003eThe range covers real differences in feel. The \u003cstrong\u003e0.16Ω\u003c\/strong\u003e pushes the most vapour and gets through juice quickest. The \u003cstrong\u003e0.17Ω 2-in-1\u003c\/strong\u003e sits in the sweet spot for everyday use. The \u003cstrong\u003e0.4Ω\u003c\/strong\u003e runs cooler at \u003cstrong\u003e40W\u003c\/strong\u003e for a lighter, more restricted DTL hit. Pick the one that suits your mood or your mod.\u003c\/p\u003e\n\u003ch3\u003eDesigned for High-VG E-Liquid\u003c\/h3\u003e\n\u003cp\u003eThese coils want a \u003cstrong\u003ehigh-VG blend, ideally 70% VG or more\u003c\/strong\u003e. Thin 50\/50 salts will flood a sub-ohm mesh coil and taste weak, so keep those for a pod device. Reach for a shortfill instead, and the wicking keeps up without dry hits.\u003c\/p\u003e\n\u003ch3\u003eLong-Lasting Coil Performance\u003c\/h3\u003e\n\u003cp\u003eCoils are consumables. Flavour dulls, and vapour drops off as the mesh ages, usually after a \u003cstrong\u003eweek or two\u003c\/strong\u003e of regular use. Having the next coil ready means you are never stuck with a burnt taste mid-week waiting on a delivery.\u003c\/p\u003e\n\u003ch2\u003eHorizonTech Sakerz Coils Resistance Options\u003c\/h2\u003e\n\u003cp\u003eThe Sakerz range gives you \u003cstrong\u003ethree genuinely different experiences\u003c\/strong\u003e, so it is worth knowing which suits your setup before you buy.\u003c\/p\u003e\n\u003cp\u003eStart with the \u003cstrong\u003e0.17Ω 2-in-1 mesh\u003c\/strong\u003e if you are unsure. This is the flagship of the range and the one most Sakerz owners come back to. The twin-mesh interior widens the heated area, which lifts flavour and vapour together, and it runs comfortably at \u003cstrong\u003e70W\u003c\/strong\u003e with high-VG juice. For most people, this is the daily driver.\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003e0.16Ω single mesh\u003c\/strong\u003e is the cloud option. It puts out the biggest plumes in the range and runs at \u003cstrong\u003e70W\u003c\/strong\u003e, with the trade-off that it drinks through e-liquid faster. Pick this one if maximum vapour matters more than coil longevity.\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003e0.4Ω mesh\u003c\/strong\u003e is the outlier and the gentlest of the three. Rated up to \u003cstrong\u003e40W\u003c\/strong\u003e, it gives a cooler, slightly tighter DTL draw that suits lower-powered mods or anyone who finds the 70W coils a bit much.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e#buttons\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e0.16 Ohm\u003cspan class=\"PDq2pG_selectionAnchor\"\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e0.17 Ohm 2-in-1\u003c\/li\u003e\n\u003cli\u003e0.4 Ohm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eHow to Set Up the Sakerz Coils\u003c\/h2\u003e\n\u003cp\u003eQuick job. Under two minutes.\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cp\u003eTurn your Sakerz tank upside down and unscrew the base to reach the coil housing. (Because it is a top-airflow tank, keeping it inverted means you don't need to empty your e-liquid).\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003ePull out the old coil from the base. It lifts straight off, no wrench needed.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eTrickle 4 to 5 drops of your e-liquid onto the exposed cotton ports of the new coil so the wick starts off wet.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003ePress the fresh coil firmly into the base until it seats on its O-rings, then screw the base back on.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eFill with high-VG juice and stand the tank upright for a full 5 minutes so the cotton saturates completely before you fire it.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eBegin low and climb. Take a few gentle pulls at a modest wattage, then work up towards the coil's rating.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2\u003eWhat's in the Sakerz Coils Box\u003c\/h2\u003e\n\u003cp\u003eEach pack contains \u003cstrong\u003ethree HorizonTech Sakerz mesh coils\u003c\/strong\u003e in your chosen resistance. That is the lot: three coils, ready to fit. There is no tank, no e-liquid, and no device included, so you will need your \u003cstrong\u003eSakerz \u003c\/strong\u003eor \u003cstrong\u003eSakerz Master tank\u003c\/strong\u003e and a bottle of high-VG juice to go with them.\u003c\/p\u003e\n\u003ch2\u003eThe Sub-Ohm Coil Made for the Sakerz Tank\u003c\/h2\u003e\n\u003cp\u003eThese are single-tank coils, purpose-built for HorizonTech's \u003cstrong\u003eSakerz sub-ohm platform\u003c\/strong\u003e. They fit the original Sakerz tank. They also fit the Sakerz Master tank. Both use the same \u003cstrong\u003epress-fit housing\u003c\/strong\u003e, so the full range of resistances is interchangeable between the two.\u003c\/p\u003e\n\u003cp\u003eWhat they will not do is fit anything else. This is not a universal coil, so it will not seat in other sub-ohm tanks. Running a different setup? Check the broader \u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/dtl-tanks\" target=\"_blank\" title=\"Sub-Ohm DTL Tanks\" rel=\"noopener\"\u003e\u003cstrong\u003eSub-Ohm DTL Tanks\u003c\/strong\u003e\u003c\/a\u003e to match coils to your own hardware, and keep a \u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/replacement-tank-glass\" target=\"_blank\" title=\"Spare Tank Glass\" rel=\"noopener\"\u003e\u003cstrong\u003eSpare Tank Glass\u003c\/strong\u003e\u003c\/a\u003e in the drawer while you are at it.\u003c\/p\u003e\n\u003ch2\u003eAbout HorizonTech\u003c\/h2\u003e\n\u003cp\u003eHorizonTech built its name on \u003cstrong\u003esub-ohm mesh coils\u003c\/strong\u003e long before mesh became the default. The brand's Falcon series helped set the standard for flavour-focused DTL vaping, and the Sakerz line carries that engineering across to a tank aimed at balance rather than sheer size.\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003e2-in-1 mesh element\u003c\/strong\u003e in the flagship coil is HorizonTech's own design, splitting the heated surface into two layers for a fuller draw. It is a coil range with a loyal following in the UK, and the Sakerz tank remains a solid pick for anyone chasing dense vapour and clean taste.\u003c\/p\u003e\n\u003ch2\u003eStock Up and Save\u003c\/h2\u003e\n\u003cp\u003eCoils are a running cost, not a one-off, so it pays to keep a set ahead. Grab a couple of packs, and you are covered for weeks rather than reordering every time the flavour drops.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePirate Vapes\u003c\/strong\u003e dispatches every order the same day when it is placed before 4 pm, sent in discreet padded packaging. Checkout is \u003cstrong\u003eage-verified\u003c\/strong\u003e, all stock is \u003cstrong\u003eTPD compliant\u003c\/strong\u003e, and it is \u003cstrong\u003eover-18s only\u003c\/strong\u003e. Pair a pack with a high-VG shortfill, and you are set.\u003c\/p\u003e\n\u003ch2\u003eConclusion\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eHorizonTech Sakerz coils\u003c\/strong\u003e are a straightforward, well-proven set for one job: keeping a Sakerz or Sakerz Master tank running at its best. The \u003cstrong\u003e0.17Ω 2-in-1\u003c\/strong\u003e is the coil to start with for flavour and vapour together, the \u003cstrong\u003e0.16Ω\u003c\/strong\u003e is there when you want maximum clouds, and the \u003cstrong\u003e0.4Ω\u003c\/strong\u003e gives a cooler, lighter draw for lower-powered setups.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePress-fit fitting\u003c\/strong\u003e makes swaps painless, and a pack of three keeps spares on hand. Stock up alongside your other \u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/vape-accessories\" target=\"_blank\" title=\"Vape Accessories\" rel=\"noopener\"\u003e\u003cstrong\u003eVape Accessories\u003c\/strong\u003e\u003c\/a\u003e and pair them with a \u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/70-30-shortfills\" target=\"_blank\" title=\"70\/30 Shortfill\" rel=\"noopener\"\u003e\u003cstrong\u003e70\/30 Shortfill\u003c\/strong\u003e\u003c\/a\u003e at \u003cstrong\u003ePirate Vapes\u003c\/strong\u003e.\u003c\/p\u003e\n\u003ch2\u003eFAQs\u003c\/h2\u003e\n\u003ch3\u003eWhich Sakerz coil should I buy first?\u003c\/h3\u003e\n\u003cp\u003eThe 0.17Ω 2-in-1 mesh. It is the flagship of the range and gives the best balance of flavour and vapour at around 70W. The 0.16Ω is the pick if you want bigger clouds instead.\u003c\/p\u003e\n\u003ch3\u003eDo Sakerz coils fit the Sakerz Master tank?\u003c\/h3\u003e\n\u003cp\u003eYes. They fit both the original Sakerz tank and the Sakerz Master tank, which share the same press-fit housing. They do not fit any other tank.\u003c\/p\u003e\n\u003ch3\u003eHow long does a Sakerz coil last?\u003c\/h3\u003e\n\u003cp\u003eUsually one to two weeks of regular use, depending on your wattage and how sweet your juice is. Dark, sweetened liquids shorten coil life. A pack of three keeps spares ready.\u003c\/p\u003e\n\u003ch3\u003eWhat e-liquid works best with Sakerz coils?\u003c\/h3\u003e\n\u003cp\u003eA high-VG blend at 70% VG or above. Sub-ohm mesh coils need thicker liquid to wick properly. Avoid thin 50\/50 nic salts, which are better suited to pod kits.\u003c\/p\u003e\n\u003ch3\u003eHow do I fit a Sakerz coil?\u003c\/h3\u003e\n\u003cp\u003eIt is press-fit, so no threading. Drip a little juice onto the cotton, push the coil into the tank base until it seats, fill up, and rest it for five minutes before vaping.\u003c\/p\u003e\n\u003ch3\u003eWhy is the 0.4Ω rated lower than the others?\u003c\/h3\u003e\n\u003cp\u003eBecause it is the cooler, gentler coil in the range. At up to 40W it gives a softer, slightly tighter DTL draw, which suits lower-powered mods and vapers who find 70W too warm.\u003c\/p\u003e","brand":"HorizonTech","offers":[{"title":"0.16 Ohm","offer_id":52899211477274,"sku":null,"price":8.95,"currency_code":"GBP","in_stock":true},{"title":"0.17 Ohm 2-in-1","offer_id":52899211510042,"sku":null,"price":8.95,"currency_code":"GBP","in_stock":true},{"title":"0.4 Ohm","offer_id":52899211542810,"sku":null,"price":8.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0995\/5675\/3690\/files\/HorizonTech_Sakerz_Replacement_Coils.jpg?v=1789633512","url":"https:\/\/piratevapes.co.uk\/products\/horizontech-sakerz-replacement-coils","provider":"Pirate Vapes","version":"1.0","type":"link"}