{"product_id":"lost-vape-ub-mini-coils","title":"Lost Vape UB Mini Coils","description":"\u003ch2\u003eLost Vape UB Mini Coils\u003c\/h2\u003e\n\u003cp\u003eTwo resistances, one honeycomb mesh build, and a fit list that covers most of Lost Vape's pod range. The \u003cstrong\u003eUB Mini coils\u003c\/strong\u003e come as a \u003cstrong\u003epack of 5\u003c\/strong\u003e in a \u003cstrong\u003e0.8ohm\u003c\/strong\u003e head for a warmer restricted-DTL draw at 12 to 17W, and a \u003cstrong\u003e1.0ohm\u003c\/strong\u003e head for a tight MTL pull at 9 to 13W.\u003c\/p\u003e\n\u003cp\u003eBoth are \u003cstrong\u003emesh\u003c\/strong\u003e, both wick fast, and both take nic salt or freebase without complaint. If you run an Orion Mini or an URSA pod, these are the coils it was built around. Pair them with \u003cstrong\u003eNic Salts\u003c\/strong\u003e for the classic MTL hit.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy vapers choose this:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eTwo draws from one coil family. The 0.8ohm gives a warmer restricted-DTL hit while the 1.0ohm keeps it tight and MTL, so you pick the feel without switching kit.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eHoneycomb mesh heats evenly across the strip for cleaner flavour and a longer working life than the round-wire heads it replaced.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eA pack of five is a month or more for most people, and coils are the one part you get through fastest.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003ePress-fit fitment means no threading and no fuss. Pull the old one, push the new one home.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eSalt or freebase, it copes with both, which keeps your e-liquid options open.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eLost Vape UB Mini Coil Features\u003c\/h2\u003e\n\u003ch3\u003eThe Honeycomb Mesh Is the Point\u003c\/h3\u003e\n\u003cp\u003eLost Vape went with a \u003cstrong\u003ehoneycomb mesh\u003c\/strong\u003e rather than a plain strip, and it earns its place. The pattern spreads heat evenly across a wider surface, so the wick sees a steady temperature and the flavour comes through cleaner. It also tends to hold that flavour for longer before the coil starts tasting tired. More even burn, fewer dry patches.\u003c\/p\u003e\n\u003ch3\u003eWhich Head Suits Your Draw?\u003c\/h3\u003e\n\u003cp\u003eTwo options, two feels. The \u003cstrong\u003e0.8ohm\u003c\/strong\u003e runs 12 to 17W for a warmer, slightly airier restricted-DTL draw, happiest with 50\/50 or \u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/high-vg-e-liquid\" target=\"_blank\" title=\"High VG E-Liquids\" rel=\"noopener\"\u003e\u003cstrong\u003eHigh VG E-Liquids\u003c\/strong\u003e\u003c\/a\u003e. The \u003cstrong\u003e1.0ohm\u003c\/strong\u003e sits at 9 to 13W for a tighter MTL pull that suits salts and higher-PG juice. Pick whichever matches how you already vape.\u003c\/p\u003e\n\u003ch3\u003eFast, Clean Coil Swaps\u003c\/h3\u003e\n\u003cp\u003eNo screw threads here. The UB Mini heads \u003cstrong\u003epress-fit\u003c\/strong\u003e straight into the pod, so a change takes seconds and your fingers stay clean. Pull the spent coil out of the base, push a fresh one in until it seats, and you are back vaping. Simple by design.\u003c\/p\u003e\n\u003ch3\u003eBuilt Around the Orion and URSA Pods\u003c\/h3\u003e\n\u003cp\u003eThese were made to slot into Lost Vape's own pod ecosystem, and that tight fitment is why wicking and flavour stay consistent instead of fighting the hardware. Run one of the \u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/mtl-vape-kits\" target=\"_blank\" title=\"MTL Vape Kits\" rel=\"noopener\"\u003e\u003cstrong\u003eMTL Vape Kits\u003c\/strong\u003e\u003c\/a\u003e from that range and the coil behaves exactly as intended. That is the upside of a head made for a specific set of devices.\u003c\/p\u003e\n\u003ch3\u003eSalt or Freebase, Your Call\u003c\/h3\u003e\n\u003cp\u003eNot every pod coil handles both nicotine types well. These do. Salts at 10 or 20mg suit the tighter \u003cstrong\u003e1.0ohm\u003c\/strong\u003e for a smooth, fast hit, while lower-strength freebase pairs nicely with the airier \u003cstrong\u003e0.8ohm\u003c\/strong\u003e. Honestly, that flexibility is half the reason the UB Mini range has stuck around this long.\u003c\/p\u003e\n\u003ch2\u003eLost Vape UB Mini Coil Resistance Options\u003c\/h2\u003e\n\u003cp\u003eTwo heads in the picker. The choice is really about how tight you like the draw and how much vapour you want.\u003c\/p\u003e\n\u003cp\u003eMost popular all-rounder: the \u003cstrong\u003e0.8ohm (S1)\u003c\/strong\u003e. It runs 12 to 17W and sits between a true MTL and a restricted-DTL draw, warmer and a touch airier. Good pick if you want a bit more vapour and flavour without going full sub-ohm. Works best with 50\/50 and higher-VG liquid.\u003c\/p\u003e\n\u003cp\u003eFor the tighter, cigarette-style draw: the \u003cstrong\u003e1.0ohm (S2)\u003c\/strong\u003e. Rated 9 to 13W, it is the MTL option, cooler and more discreet, and it is the natural home for salts and higher-PG juice. If you came off cigarettes and want that familiar pull, start here.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e#buttons\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e0.8ohm (S1)\u003c\/li\u003e\n\u003cli\u003e1.0ohm (S2)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eHow to Set Up the Lost Vape UB Mini Coils\u003c\/h2\u003e\n\u003cp\u003eQuick swap. Under two minutes, no tools.\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cp\u003eTake the pod off the device and empty any old liquid if you are changing coils mid-tank.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003ePull the spent coil free from the base of the pod. It press-fits on seals, so a firm, straight tug releases it.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eTrickle four or five drops of e-liquid into the wicking windows on the side of the fresh coil, plus one drop straight onto the mesh.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003ePush the new coil into the pod base until it clicks home, then refill the pod with your chosen liquid.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eSlot the pod back on and leave it standing for a good seven minutes so the mesh saturates fully before you take a draw.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eEase in gently. Start near the low end of the wattage range and take a few soft pulls before settling in.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2\u003eWhat's in the Lost Vape UB Mini Coil Box\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eFive coils\u003c\/strong\u003e, sealed and packed, in the resistance you select. That is the lot: no pod, no device, no e-liquid. Pirate Vapes keeps the Orion Mini and URSA hardware these drop into over in the \u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/refillable-pod-kits\" target=\"_blank\" title=\"Refillable Pod Kits\" rel=\"noopener\"\u003e\u003cstrong\u003eRefillable Pod Kits\u003c\/strong\u003e\u003c\/a\u003e section if you still need the kit itself.\u003c\/p\u003e\n\u003ch2\u003eMade for Lost Vape's Orion Mini and URSA Pods\u003c\/h2\u003e\n\u003cp\u003eFitment is the whole story with any coil, and the UB Mini heads were designed around a specific set of Lost Vape pods. They drop into the Orion Mini and across much of the URSA family, from the Nano and Nano Pro through to the Baby and Baby Pro. The Thelema GO takes them as well.\u003c\/p\u003e\n\u003cp\u003eWhat they will not fit: pods and tanks from other brands, or Lost Vape kits built on a different coil platform. A \u003cstrong\u003eUB Mini head\u003c\/strong\u003e only belongs in a device that calls for a UB Mini head. If your current coil is marked S1 or S2 and press-fits into the pod base, you are in the right place. Still, it is worth a quick check against your exact kit before ordering, because the URSA line has grown a lot.\u003c\/p\u003e\n\u003ch2\u003eAbout Lost Vape\u003c\/h2\u003e\n\u003cp\u003eLost Vape built its name on pod systems that feel a cut above, the leather-and-metal Orion and URSA kits that turned plenty of MTL vapers into loyalists. The \u003cstrong\u003eUB Mini coil platform\u003c\/strong\u003e is the engine behind that range.\u003c\/p\u003e\n\u003cp\u003eIt is the part doing the actual work: honeycomb mesh, fast wicking, and a fit tuned to Lost Vape's own pods rather than a generic one-size head. Getting the coil right for the device is a big part of why the Orion and URSA kits keep their name for clean, consistent flavour.\u003c\/p\u003e\n\u003ch2\u003eStock Up and Save\u003c\/h2\u003e\n\u003cp\u003eA single UB Mini head lasts most vapers a week or two before the flavour dips, so a \u003cstrong\u003epack of 5\u003c\/strong\u003e works out to a couple of months of steady use. Buy two packs and the cost per coil drops while you build a proper buffer for when one burns out.\u003c\/p\u003e\n\u003cp\u003eEvery order from \u003cstrong\u003ePirate Vapes\u003c\/strong\u003e ships same day before 4pm in padded packaging. All stock is TPD compliant, the checkout is age-verified, and it is strictly over-18s only.\u003c\/p\u003e\n\u003ch2\u003eConclusion\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eLost Vape UB Mini coils\u003c\/strong\u003e do the simple thing well: two solid mesh heads that cover both a warmer restricted-DTL draw and a tight MTL one, in a fit tuned to the Orion Mini and URSA pods.\u003c\/p\u003e\n\u003cp\u003ePick the \u003cstrong\u003e0.8ohm\u003c\/strong\u003e for more vapour and warmth, or the \u003cstrong\u003e1.0ohm\u003c\/strong\u003e for a cooler, cigarette-style pull. Stock up on coils and grab any \u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/vape-accessories\" target=\"_blank\" title=\"Vape Accessories\" rel=\"noopener\"\u003e\u003cstrong\u003eVape Accessories\u003c\/strong\u003e\u003c\/a\u003e you need in the same order at \u003ca href=\"https:\/\/piratevapes.co.uk\/\" target=\"_blank\" title=\"Pirate Vapes\" rel=\"noopener\"\u003e\u003cstrong\u003ePirate Vapes\u003c\/strong\u003e\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eFAQs\u003c\/h2\u003e\n\u003ch3\u003eWhich kits do the UB Mini coils fit?\u003c\/h3\u003e\n\u003cp\u003eThe Lost Vape Orion Mini and most of the URSA pod range, including the Nano, Nano Pro, Baby, and Baby Pro. The Thelema GO takes them as well.\u003c\/p\u003e\n\u003ch3\u003eAre the UB Mini coils mesh?\u003c\/h3\u003e\n\u003cp\u003eYes, honeycomb mesh on both resistances. That is what gives the cleaner flavour and the steadier wicking.\u003c\/p\u003e\n\u003ch3\u003eUB Mini coils 0.8ohm or 1.0ohm, which should I pick?\u003c\/h3\u003e\n\u003cp\u003eThe 0.8ohm for a warmer, airier restricted-DTL draw. The 1.0ohm for a tighter MTL pull with salts. Match it to how you already vape.\u003c\/p\u003e\n\u003ch3\u003eWhat e-liquid works best with the UB Mini coils?\u003c\/h3\u003e\n\u003cp\u003eThe 1.0ohm likes salts and 50\/50. The 0.8ohm handles 50\/50 and higher-VG liquid for a touch more vapour.\u003c\/p\u003e\n\u003ch3\u003eHow long does one UB Mini coil last?\u003c\/h3\u003e\n\u003cp\u003eUsually one to two weeks. Sweet, dark liquids gunk the mesh faster, so those shorten it. Prime it properly and you reach the top end.\u003c\/p\u003e\n\u003ch3\u003eDo I really need to prime the UB Mini coils?\u003c\/h3\u003e\n\u003cp\u003eYes, every time. A dry mesh coil fired on the first pull is a ruined coil. Wet the wicking windows and let it soak before you vape.\u003c\/p\u003e","brand":"Lost Vape","offers":[{"title":"0.8ohm s1","offer_id":52770880880922,"sku":null,"price":9.95,"currency_code":"GBP","in_stock":true},{"title":"1.0ohm s2","offer_id":52770880913690,"sku":null,"price":9.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0995\/5675\/3690\/files\/Lost_Vape_UB_Mini_Coils.jpg?v=1788158479","url":"https:\/\/piratevapes.co.uk\/products\/lost-vape-ub-mini-coils","provider":"Pirate Vapes","version":"1.0","type":"link"}