{"product_id":"oxva-xlim-v3-replacement-pod","title":"Oxva Xlim V3 Replacement Pod","description":"\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eOxva Xlim V3 Replacement Pod\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eTop-fill, built-in Unitech 2.0 mesh coil, and compatibility across \u003cstrong\u003e15+ OXVA Xlim devices\u003c\/strong\u003e. The V3 pod fixes the two things Xlim owners complained about most: messy side-fill refills and condensation leaking from the base. Now you refill through a silicone stopper on the side without removing the pod from the device. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eFour resistances cover tight MTL through to open RDTL: 0.4, 0.6, 0.8, and 1.2 ohm. Sold in 3-packs. 2ml TPD compliant. Each pod lasts one to two weeks depending on usage. TPD compliant. Over 18s only.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eWhy vapers choose Oxva Xlim V3 Replacement Pods:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eTop-fill without removing the pod.\u003c\/span\u003e\u003cspan\u003e Pull the silicone stopper, fill through the side port, and press it shut. The V2 needed to come out of the device to refill. The V3 does not.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eFour resistances in one pod format.\u003c\/span\u003e\u003cspan\u003e 0.4, 0.6, 0.8, 1.2 ohm. Tight MTL to open RDTL in the same pod shape. Switch resistance without switching devices.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eUnitech 2.0 mesh coils with five-layer cotton wicking.\u003c\/span\u003e\u003cspan\u003e The mesh heats faster and more evenly. The five-layer cotton pulls liquid to the coil without dry spots, even at low tank levels.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eTransparent window shows liquid level.\u003c\/span\u003e\u003cspan\u003e A clear strip on the side so you can check without pulling the pod out. Useful when you are running low mid-session.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eFits 15+ Xlim devices.\u003c\/span\u003e\u003cspan\u003e Pro, Pro 2, Pro 3, SE, SE 2, SQ Pro, Go, Go 2, Classic Edition, and more. One pod stash covers your whole collection.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eOxva Xlim V3 Replacement Pod Features\u003c\/span\u003e\u003c\/h2\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eUnitech 2.0 Mesh Coil\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eOXVA's proprietary mesh coil with five-layer cotton wicking. The mesh grid distributes heat across a wider area than traditional round-wire coils, which means more of the e-liquid contacts the heated surface at once. Result: faster ramp-up, stronger flavour from the first puff, and a pod that keeps performing well even when the tank is nearly empty.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eTop-Fill Design\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe V2 pod had to be pulled from the device to refill. The V3 has a silicone stopper on the side that lifts open. Fill through the port, press it shut. No removal, no exposed contacts, no mess on your fingers. It is a small change that makes daily refilling noticeably less frustrating.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eAnti-Leak Base Seal\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eCondensation building up around the pod contacts was the most common V2 complaint. OXVA redesigned the base seal on the V3 to prevent moisture from pooling at the connector. The pod still needs wiping occasionally, but the dripping problem that V2 users dealt with is largely solved.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eFour Resistances for MTL and RDTL\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003e0.4 ohm at 26-30W for open RDTL with noticeable cloud. 0.6 ohm at 20-25W for a slightly restricted draw. 0.8 ohm at 12-18W for standard MTL with nic salts. 1.2 ohm at 10-12W for the tightest draw with the lightest vapour. All four use the same pod shape and magnetic connection.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eTransparent Liquid Level Window\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eA clear strip runs down the side of the pod. Glance at it to check your e-liquid level without pulling the pod out or tilting the device. Saves you from the dry hit you get when you forget to check, and the tank runs empty.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eHow to Set Up the Oxva Xlim V3 Replacement Pod\u003c\/span\u003e\u003c\/h2\u003e\n\u003col\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eUnpack.\u003c\/span\u003e\u003cspan\u003e Take a fresh pod from the 3-pack.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eFill.\u003c\/span\u003e\u003cspan\u003e Lift the silicone stopper on the side of the pod to reveal the fill port. Add your nic salt or 50\/50 e-liquid up to the fill line. Press the stopper firmly shut.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003ePrime.\u003c\/span\u003e\u003cspan\u003e Stand the filled pod upright for five to ten minutes. The five-layer cotton needs time to soak before your first draw. Skip this and the mesh coil will taste dry and burnt.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eRemove the old pod.\u003c\/span\u003e\u003cspan\u003e Pull the spent pod from your Xlim device and discard it.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eInsert.\u003c\/span\u003e\u003cspan\u003e Push the new pod into the device. The magnetic connection clicks it into position.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eVape.\u003c\/span\u003e\u003cspan\u003e Inhale through the mouthpiece or press the fire button depending on your Xlim model.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eWhat's in the Oxva Xlim V3 Replacement Pod Box\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThree pods per pack. Each pod is 2ml, PCTG construction, with a non-replaceable Unitech 2.0 mesh coil sealed inside. The pack does not include the device or e-liquid. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003ePick up an \u003cstrong\u003eOXVA Xlim Kit \u003c\/strong\u003eor browse \u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/nic-salts\" target=\"_blank\" title=\"Nic Salt E-Liquids\" rel=\"noopener\"\u003e\u003cstrong\u003eNic Salt E-Liquids\u003c\/strong\u003e\u003c\/a\u003e at Pirate Vapes if you need either.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 data-section-id=\"1h81et0\" data-start=\"0\" data-end=\"39\" class=\"PDq2pG_selectionAnchorContainer\"\u003eCompatible with the OXVA Xlim Range\u003cspan aria-hidden=\"true\" class=\"PDq2pG_selectionAnchor\"\u003e\u003c\/span\u003e\n\u003c\/h2\u003e\n\u003cp data-start=\"41\" data-end=\"273\"\u003eThese pods work with most OXVA Xlim devices. If your device has \u003cstrong data-start=\"105\" data-end=\"113\"\u003eXlim\u003c\/strong\u003e in the name and \u003cstrong data-start=\"130\" data-end=\"150\"\u003eisn't the Xlim C\u003c\/strong\u003e, there's a good chance they're compatible. The \u003cstrong data-start=\"198\" data-end=\"210\"\u003e0.4Ω pod\u003c\/strong\u003e is the only exception, as it requires a higher-powered device.\u003c\/p\u003e\n\u003cul data-start=\"275\" data-end=\"774\"\u003e\n\u003cli data-section-id=\"1f17jfp\" data-start=\"275\" data-end=\"361\"\u003e\n\u003cstrong data-start=\"277\" data-end=\"309\"\u003eXlim Pro (Pro, Pro 2, Pro 3)\u003c\/strong\u003e – Supports all pod resistances, including \u003cstrong data-start=\"352\" data-end=\"360\"\u003e0.4Ω\u003c\/strong\u003e.\u003c\/li\u003e\n\u003cli data-section-id=\"1z0xyg2\" data-start=\"362\" data-end=\"470\"\u003e\n\u003cstrong data-start=\"364\" data-end=\"398\"\u003eXlim SE (SE, SE 2, SE Classic)\u003c\/strong\u003e – Supports \u003cstrong data-start=\"410\" data-end=\"434\"\u003e0.6Ω, 0.8Ω, and 1.2Ω\u003c\/strong\u003e. \u003cstrong data-start=\"436\" data-end=\"444\"\u003e0.4Ω\u003c\/strong\u003e works with \u003cstrong data-start=\"456\" data-end=\"469\" data-is-only-node=\"\"\u003eSE 2 only\u003c\/strong\u003e.\u003c\/li\u003e\n\u003cli data-section-id=\"1grnz4e\" data-start=\"471\" data-end=\"535\"\u003e\n\u003cstrong data-start=\"473\" data-end=\"503\"\u003eXlim SQ (SQ Pro, SQ Pro 2)\u003c\/strong\u003e – Supports all pod resistances.\u003c\/li\u003e\n\u003cli data-section-id=\"1mpq8ap\" data-start=\"536\" data-end=\"631\"\u003e\n\u003cstrong data-start=\"538\" data-end=\"560\"\u003eXlim Go (Go, Go 2)\u003c\/strong\u003e – Supports all standard pods. Check your device before using \u003cstrong data-start=\"622\" data-end=\"630\"\u003e0.4Ω\u003c\/strong\u003e.\u003c\/li\u003e\n\u003cli data-section-id=\"1q10ag5\" data-start=\"632\" data-end=\"709\"\u003e\n\u003cstrong data-start=\"634\" data-end=\"667\"\u003eXlim \u0026amp; Xlim Classic \/ Xlim V2\u003c\/strong\u003e – Supports \u003cstrong data-start=\"679\" data-end=\"703\"\u003e0.6Ω, 0.8Ω, and 1.2Ω\u003c\/strong\u003e only.\u003c\/li\u003e\n\u003cli data-section-id=\"1erzsyx\" data-start=\"710\" data-end=\"774\"\u003e\n\u003cstrong data-start=\"712\" data-end=\"742\"\u003eDovpo Ayce Mini \u0026amp; Ayce Pro\u003c\/strong\u003e – Supports all pod resistances.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-start=\"776\" data-end=\"813\" data-is-last-node=\"\" data-is-only-node=\"\"\u003e\u003cstrong data-start=\"776\" data-end=\"800\"\u003eNot compatible with:\u003c\/strong\u003e OXVA Xlim C.\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eAbout OXVA\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eOXVA builds pod kits and e-liquids. The Xlim range is their core product line, and the V3 pod is the current standard across the family. OXVA develops the Unitech 2.0 coil technology in-house and tests it in their own devices, which is why the pod-to-device fit and flavour extraction are tighter than what you get with third-party pods in other systems. The OX Passion nic salt range is formulated to pair with these coils specifically. Browse the full \u003ca href=\"https:\/\/piratevapes.co.uk\/collections\/oxva-vapes\" target=\"_blank\" title=\"OXVA Vapes\" rel=\"noopener\"\u003e\u003cstrong\u003eOXVA Vapes\u003c\/strong\u003e\u003c\/a\u003e collection at Pirate Vapes.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eStock Up and Save\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eRunning out of pods mid-week is the problem nobody plans for. A 3-pack covers three to six weeks depending on your usage. At Pirate Vapes, we carry all four Xlim V3 resistances in stock and confirm the resistance matches what you ordered before every shipment leaves the warehouse. Every pod we sell is TPD compliant and MHRA-notified. The Crow's Nest subscription sends pods on your schedule so you never run dry.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eConclusion\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eTop-fill, Unitech 2.0 mesh, five-layer cotton, transparent viewing window, and compatibility across 15+ Xlim devices in one pod format. The V3 fixes what the V2 got wrong (messy refills, condensation leaking) and keeps what it got right (flavour, pod life, magnetic fit). Four resistances cover every MTL and RDTL draw style. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe 0.8-ohm is where most Xlim owners land. Grab a 3-pack from \u003ca href=\"https:\/\/piratevapes.co.uk\/\" target=\"_blank\" title=\"Pirate Vapes\" rel=\"noopener\"\u003e\u003cstrong\u003ePirate Vapes\u003c\/strong\u003e\u003c\/a\u003e and pair with your favourite nic salt from our e-liquids collection.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eFAQs\u003c\/span\u003e\u003c\/h2\u003e\n\u003ch3 dir=\"ltr\"\u003e\n\u003cspan\u003eWhich resistance is best for nic salts?\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003e\n\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003e0.8 ohm. Runs at 12-18W, firm MTL draw, pairs well with 10mg and 20mg nic salt. The 1.2 is tighter if you prefer less vapour. Both handle nic salts and 50\/50 blends without issues.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eDoes the 0.4-ohm pod fit every Xlim device?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eIt needs more power than some older and smaller Xlim kits provide. It fits the Xlim Pro, Pro 2, Pro 3, SE 2, SQ Pro, and SQ Pro 2. It does not fit the original Xlim, Xlim V2, or Xlim SE Bonus Classic.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\n\u003cspan\u003eWhat is the difference between V2 and V3 pods?\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003e\n\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eTop-fill vs side-fill. The V2 needed to be removed from the device to refill. The V3 has a silicone stopper on the side. V3 also has a redesigned base seal to reduce condensation leaking and upgraded Unitech 2.0 mesh coils with five-layer cotton wicking.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\n\u003cspan\u003eHow long does each pod last?\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003e\n\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eOne to two weeks for most vapers. Sweet e-liquids shorten that. Tobacco and menthol profiles tend to last longer. Some careful users report pods lasting a month or more with regular cleaning and consistent topping up.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eDo I need to prime a new pod?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eFill it, stand it upright for five to ten minutes, then vape. The five-layer cotton needs time to soak. Skipping the prime burns the mesh coil on the first draw.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\n\u003cspan\u003eCan I use high VG e-liquid?\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003e\n\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eIn the 0.4-ohm pod at 50\/50 or slightly higher VG, it works. For 0.6 through 1.2 ohm, stick to 50\/50 or nic salts. High VG (70\/30+) does not wick fast enough through the higher-resistance coils.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\n\u003cspan\u003eWill V2 pods still fit my Xlim Pro?\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003e\n\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eV2 pods fit many of the same devices, but OXVA has made the V3 the current standard. V2 pods are being phased out at most UK retailers. V3 pods offer better flavour, easier refilling, and improved leak resistance.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eIs there a larger capacity option?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe EZ XL version holds 3ml instead of 2ml. Same top-fill design, same Unitech 2.0 mesh coils. Less frequent refilling.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\n\u003cspan\u003eDoes this pod leak?\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003e\n\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe V3 base seal addresses the condensation issue V2 users experienced. With normal use, leaking is minimal. Do not overfill past the line, make sure the silicone stopper is pressed firmly, and wipe the contacts if moisture does build up.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\n\u003cspan\u003eAre these pods MHRA-registered?\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003e\n\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eAll OXVA Xlim V3 pods sold through Pirate Vapes carry MHRA notification and TPD compliance. Age-verified checkout, 18 and over only.\u003c\/span\u003e\u003c\/p\u003e","brand":"Oxva","offers":[{"title":"0.4 ohm","offer_id":52456320368922,"sku":null,"price":8.99,"currency_code":"GBP","in_stock":true},{"title":"0.6 ohm","offer_id":52456320401690,"sku":null,"price":8.99,"currency_code":"GBP","in_stock":true},{"title":"0.8 ohm","offer_id":52456320434458,"sku":null,"price":8.99,"currency_code":"GBP","in_stock":true},{"title":"1.2 ohm","offer_id":52456320467226,"sku":null,"price":8.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0995\/5675\/3690\/files\/OxvaXlimV3ReplacementPod.jpg?v=1784700299","url":"https:\/\/piratevapes.co.uk\/products\/oxva-xlim-v3-replacement-pod","provider":"Pirate Vapes","version":"1.0","type":"link"}