Aspire Gotek X Replacement Pods

Refillable Replacement Pods for the Aspire Gotek X and the wider Gotek device family. Sold in 2-packs, each empty pod fills with your own e-liquid through a side port, so you pick any flavour and nicotine strength you like.

Every pod uses the same 0.8-ohm non-replaceable mesh coil and clicks into the same devices. Choose the 2ml (TPD) size for compliant everyday use, or the larger 4.5ml if you fill less often. Each pod lasts seven to fourteen days before you swap it. No coil to thread, no tools. TPD compliant in the 2ml size.

Why vapers choose Aspire Gotek X Replacement Pods:

• Your flavour, your strength. Fill each pod with any 50/50 or nic salt e-liquid, in whatever flavour and nicotine level suits you.

• 0.8-ohm mesh coil in every pod. Mesh heats liquid across a wider surface than wire, keeping flavour sharper for seven to fourteen days per pod.

• No coil swaps, no threading. The coil is non-replaceable and sealed inside. When it fades, you replace the whole pod in seconds.

• One pod fits five Gotek devices. Gotek X, Gotek Pro, Gotek X3, Gotek S, and Gotek Nano all take the same pod. Your stash works across any you own.

• Two sizes to suit you. Grab the compliant 2ml for daily use, or the 4.5ml if you would rather top up less often.

Aspire Gotek X Replacement Pods Features

0.8-Ohm Non-Replaceable Mesh Coil

The mesh coil is sealed inside the pod, so you never handle or thread it. The 0.8-ohm resistance is matched to the Gotek X's 10-13W Smart Mode output for a clean, flavourful MTL draw. When the flavour drops off, you simply swap the whole pod rather than changing a coil.

Refillable Side-Fill Port

Pull the rubber stopper on the side, add your chosen e-liquid, and reseal. Pick any 50/50 or nic salt in whatever flavour and strength suits you. The side port makes topping up clean and reduces overfilling, and one 10ml bottle refills a 2ml pod roughly five times.

Two Capacities: 2ml and 4.5ml

Both share the same coil and fit. The 2ml is the UK TPD size for nicotine e-liquid and suits most daily vapers. The 4.5ml holds more for fewer refills, but it goes past the UK's 2ml nicotine limit, so it is not TPD-compliant. Choose the 2ml to stay compliant with nicotine juice.

Multi-Use Durability

Each pod handles several refills before the coil degrades, typically seven to fourteen days of use. When flavour thins or turns slightly burnt, the coil is spent and the swap takes seconds. Heavily sweetened e-liquids will shorten coil life faster than lighter blends.

Cross-Device Compatibility

The pods click into the Gotek X, Gotek Pro, Gotek X3, Gotek S, and Gotek Nano. If you own more than one Gotek device or plan to upgrade later, your pod stash carries over across the whole family with no adapters or changes.

Aspire Gotek X Replacement Pods E-Liquid Compatibility

These are Refillable Pods, so there is no set flavour. You choose that with your e-liquid, and the flavour and nicotine strength are fully customisable. 

The 0.8-ohm mesh coil is built for 50/50 VG/PG or Nic Salt E-Liquids, which wick cleanly and carry flavour well on an MTL draw. 

Higher-VG blends (70/30 or above) are too thick to wick efficiently through the mesh and can lead to dry hits. Nic salts at 10mg or 20mg are the most popular pairing. Pick your flavour and strength from our nic salt e-liquids collection at Pirate Vapes.

How to Set Up the Aspire Gotek X Replacement Pods

1. Pull the spent pod from the top of your Gotek device and dispose of it.

2. Take a fresh empty pod from the 2-pack.

3. Pull the rubber stopper on the side, add your e-liquid up to the fill line, and push the stopper firmly back into place.

4. Push the pod into the top of the device until it clicks into place.

5. Leave the device standing upright for about 10 minutes so the coil soaks in the e-liquid. This prevents a dry, burnt first draw.

6. Inhale through the mouthpiece. The device fires on draw.

What's in the Aspire Gotek X Replacement Pods Box

Two empty refillable pods per pack, each with the 0.8-ohm mesh coil sealed inside, ready to fill with your own e-liquid. The device and USB-C cable are not included. Pick up the Aspire Gotek X kit at Pirate Vapes if you need the device, or browse our nic salt e-liquids collection for something to fill them with.

Built for the Entire Aspire Gotek Range

These pods fit the Gotek X, Gotek Pro, Gotek X3, Gotek S, and Gotek Nano. The 0.8-ohm mesh coil is the standard across the Gotek family, with no adapters or modifications needed. The pod clicks into any of these devices, and the ASP Chipset handles the wattage automatically. 

If you are upgrading from the Gotek X, your pod supply works in every other Gotek device without changes. Note the 0.6-ohm Gotek pod is built for the Gotek Pro only and is not compatible with the Gotek X or Gotek S.

About Aspire

Aspire has manufactured vape hardware since 2013, earning a reputation for kits that hold up over time. The Gotek range is its compact pod family, built around a shared pod format and the ASP Chipset that handles power management automatically.

The Gotek X, Gotek Pro, and Gotek Nano all use the same replacement pods, which keeps things simple when you reorder. Aspire develops and tests every device in-house, and the Gotek pods meet UK TPD requirements in the 2ml size. Browse the Aspire vapes collection for the full lineup.

Stock Up and Save

Each pod lasts one to two weeks, so a 2-pack covers roughly a month. Ordering a few packs at once through Pirate Vapes Value Bundles drops the per-pod price: the more you grab, the less each pack costs. 

Every order ships tracked from our warehouse, so you know exactly when your pods arrive. Hit £25 and delivery is on us. Refer a friend through our Refer and Earn programme and you both get a discount on your next order.

Conclusion

If you run any device in the Gotek family, these are the pods to keep spare. You fill them with your own e-liquid, so you keep full control over flavour, strength, and brand. The 0.8-ohm mesh coil holds flavour for up to two weeks, the side-fill port keeps refilling clean, and the same pod fits five Gotek devices.

Choose the 2ml for TPD-compliant everyday use or the 4.5ml for fewer top-ups, and swap the whole pod in seconds when the coil is done. Available across our Refillable Pod Kits range at Pirate Vapes.

FAQs

How do I know when to replace the pod?

Flavour will fade, vapour will thin, and you may catch a faint burnt taste. When any of those happen, swap to a fresh pod from the pack.

Can I use these pods in the Gotek Pro?

The 0.8-ohm Gotek pod fits the Gotek X, Gotek Pro, Gotek X3, Gotek S, and Gotek Nano. One pod type, five compatible devices.

What e-liquid should I use?

50/50 VG/PG or nic salts work best. Nic salts at 10mg or 20mg are the most popular pairing. Avoid high-VG blends (70/30 or above), as they may not wick efficiently.

How many times can I refill one pod?

Multiple times. Most vapers get seven to fourteen days of use from one pod across several refills. Heavily sweetened e-liquids may shorten coil life.

What is the difference between the 2ml and 4.5ml?

Capacity, and UK compliance. The 2ml is the TPD-compliant size for nicotine e-liquid. The 4.5ml holds more but goes beyond the 2ml nicotine limit, so it sits outside TPD. Both share the same coil and fit.

Is there a 0.6-ohm option?

The 0.6-ohm Gotek pod exists but is designed for the Gotek Pro kit. The Gotek X uses the 0.8-ohm version only.