Blueberry Gum Al Fakher 50K Hypermax Prime Refill Pods

Blueberry Gum Al Fakher 50K Hypermax Prime Refill Pods

One 2ml Snap Dual pod module and two sealed 10ml containers are supplied in each pack of Blueberry Gum Al Fakher 50K Hypermax Prime Refill Pods, which makes 20ml of nicotine salt e-liquid in total. Rated puff life reaches up to 50,000 per set on the Prime 50K kit, and the nicotine comes at 20mg/ml.

Blueberry Gum is the only flavour supplied, and the packs come in 3 sizes. The pods are calibrated for restricted direct-to-lung (RDL) and direct-to-lung (DTL) vaping, and adjustable airflow is supported once the module is seated in the device. Because the containers arrive full, a spent module is replaced without any pouring.

What to Know About the Blueberry Gum Hypermax Prime Pods

• Single flavour, Blueberry Gum, in 3 pack sizes
• 1 Snap Dual module (2ml, 0.6Ω mesh coil) and 2 x 10ml containers in every pack
• 20mg/ml nicotine salt
• Rated at up to 50,000 puffs, fewer with long draws
• Fits the Hypermax Prime 50K kit only, not Hypermax 30K or Crown Bar devices

Features of Blueberry Gum Al Fakher 50K Hypermax Prime Refill Pods

Flavour, pod module, containers, puff rating, and nicotine type are covered below. Every set belongs to the Replacement Pods range and is matched to the Hypermax Prime 50K battery.

Blueberry and Bubblegum Flavour

Blueberry Gum pairs sweet wild blueberry with a chewy bubblegum base. Both containers are filled with the same e-liquid, so the taste is held constant from the first container to the last. Other Hypermax Prime refills are sold as separate products. That keeps the flavour choice clear when a basket is built.

Snap Dual Pod Module

A Snap Dual module is supplied in every pack, with a 0.6Ω mesh coil built into it. Its capacity is 2ml, the UK limit for a nicotine pod. The coil and pod are replaced as one part, so no loose coil is needed, and no hand-priming is involved. One battery serves every module.

Two Sealed 10ml Containers

Each module is packed with two 10ml containers, which gives 20ml of e-liquid per pack. The UK caps nicotine refill containers at 10ml, so these sit at the limit. Both are supplied full and sealed, so nothing is measured or poured during a swap, and topping them up is not intended.

Up to 50,000 Puffs

Per set, the Hypermax Prime 50K system is quoted at up to 50,000 puffs. Light, brief draws get closest to it. Heavier ones use the e-liquid faster, so real totals vary with draw length and power mode. Systems with similar ratings can be browsed in Big Puff Vapes.

Nicotine Salt at 20mg/ml

Nicotine comes as a nicotine salt, and the strength is 20mg/ml, the legal cap in the UK. The pods and the kit are both TPD compliant and MHRA notified. Adults only should use these pods, as nicotine is addictive. Comparable e-liquids can be browsed in Nic Salts.

How to Swap the Blueberry Gum Hypermax Prime Pods

A swap replaces the module and both containers together. The kit battery is left in place, and no tools are needed.

Step 1: Unpack the new module and the two Blueberry Gum containers, then peel off any seals or film.

Step 2: Click both containers onto the new module until each one locks in place, then stand it upright for several minutes so the mesh coil can get wet.

Step 3: Pull the empty module off the Hypermax Prime 50K kit.

Step 4: Press the loaded module onto the kit until it clicks.

Step 5: Take gentle first draws and adjust the airflow to taste.

What's in the Blueberry Gum Hypermax Prime Pods Pack

A single pack makes up one refill set, and the larger sizes multiply that.

• 1 x Snap Dual pod module, 2ml, 0.6Ω mesh coil inside
• 2 x 10ml Blueberry Gum nicotine salt containers, sealed

A Pack Of 5 holds 5 modules and 10 containers, while a Pack Of 10 holds 10 modules and 20 containers. The Hypermax Prime 50K kit and its battery are not included, because these packs are refills only.

Devices Compatible With the Blueberry Gum Hypermax Prime Pods

These modules are built for the Al Fakher Hypermax Prime 50K kit and for no other device. Anyone without one can choose a kit from Prefilled Pod Kits, and that battery carries over to every new module.

Hypermax 30K pods and Crown Bar devices are not compatible, so Prime modules do not fit them and their pods do not fit the Prime kit. A shared brand name on another maker's device is no guide to fit either. The kit should read Hypermax Prime 50K before an order is placed.

About Al Fakher and the Hypermax Prime System

In the Hypermax Prime system from Al Fakher, the pod is kept apart from its supply. A 2ml module sits on the battery and is fed by 10ml containers, so both UK size limits for nicotine (2ml pods, 10ml refills) are met.

The same module and container format is shared by every Prime flavour, so a different flavour is fitted to the kit with no other change. Prefilled kits built around a similar idea are grouped under Big Puff Pod Kits.

Stock Up on the Blueberry Gum Prime Pods

Spare Al Fakher Prime pods are worth keeping beside the kit, and five or ten complete Blueberry Gum sets are included in the larger sizes.

Free Pirate Post applies once a Pirate Vapes basket passes £40, and more items can be added from Multi-Buy Vapes. Orders are age-verified before dispatch, and under-18s cannot buy nicotine pods.

Conclusion

Owners of the Hypermax Prime 50K kit who like blueberry with a bubblegum finish are the natural buyers of these Al Fakher Blueberry Gum pods. One set is enough to try the flavour, while spares are kept ready by the larger packs.

Kits for anyone without a device are in Vape Kits, while the rest of the range can be browsed from the Pirate Vapes front page.

FAQs

Which kit do the Blueberry Gum Al Fakher 50K Hypermax Prime Refill Pods fit?

Only the Al Fakher Hypermax Prime 50K kit takes them. Hypermax 30K pods and Crown Bar devices belong to different systems, and neither works with the Prime kit.

How many puffs do the Blueberry Gum 50 K pods give?

Ratings for the Prime 50K kit reach up to 50,000 puffs per set, though draw length and power mode change the total. Brief draws come closer to the figure, and long ones fall short of it.

What is in one pack of Blueberry Gum Hypermax Prime pods?

One pack contains a 2ml Snap Dual module with a mesh coil inside and two sealed 10ml containers of Blueberry Gum e-liquid. That makes 20ml per pack, and the kit is not included.

What nicotine strength do the Al Fakher 50k pods in Blueberry Gum have?

A 20mg/ml strength is used throughout, in nicotine salt form. Addiction is a known risk with nicotine, so these pods are for adults only.

Do the Blueberry Gum Prime pods need priming?

Nothing needs to be dripped onto the coil, as the mesh is housed in the module and the containers are filled before they ship. Clicking the containers in and standing the module upright for several minutes lets the coil wet.

Is every pod in a Blueberry Gum multipack the same flavour?

Each multipack contains Blueberry Gum throughout, with five or ten identical sets. Only the number of modules and containers changes between sizes.