Blueberry Mint Al Fakher 50K Hypermax Prime Refill Pods

Blueberry Mint Al Fakher 50K Hypermax Prime Refill Pods

Blueberry Mint Al Fakher 50K Hypermax Prime Refill Pods are replacement sets for the Hypermax Prime 50K kit. Each set pairs a 2ml Snap Dual pod module with two prefilled 10ml containers. Strength is 20mg/ml and the mesh coil sits inside the module, with each set quoted at up to 50,000 puffs.

Only Blueberry Mint is supplied, in three quantities: one set, five, or ten. A DTL or RDL draw is supported through adjustable airflow, and nothing has to be poured at a swap, because the containers are supplied full.

What to Know About the Blueberry Mint Hypermax Prime Pods

• Blueberry Mint only, offered in 3-pack sizes
• One 2ml Snap Dual module with a 0.6ohm mesh coil and 2 x 10ml containers per set
• 20mg/ml nicotine salt, with 20ml of e-liquid per set
• Rated at up to 50,000 puffs per set, fewer with long draws
• Fits the Hypermax Prime 50K kit only, not the 30K or Crown Bar devices

Features of Blueberry Mint Al Fakher 50K Hypermax Prime Refill Pods

The flavour, module, containers, puff rating, and draw are covered below. All of them are matched to the Prime 50K battery, which is kept from one set to the next. Refill modules for the wider range are collected in Replacement Pods.

Blueberry Mint Flavour

Blueberry Mint leads with ripe, mellow blueberry, and a crisp natural mint note cuts through the sweetness on the exhale. One liquid is held in both containers, so the taste is kept constant from the first container to the last. The other flavours of Al Fakher 50K pods are listed as separate products, which keeps each choice clear when a basket is built.

Snap Dual Mesh Coil Module

A 2ml Snap Dual pod module is included in every set, with a 0.6ohm mesh coil built into it. The coil and pod are replaced as one part, so no loose coil has to be bought, and nothing is dripped onto it by hand. Two millilitres is the ceiling for a UK nicotine pod, and only the module and containers are renewed.

Two 10ml Containers of Nic Salt

Two 10ml containers are packed with each module, which gives 20ml of Blueberry Mint e-liquid per set. At 20mg/ml, the liquid sits at the UK maximum, while 10ml is the largest refill container allowed for nicotine. The containers are supplied prefilled, so a swap needs no measuring or topping up.

Up to 50,000 Puffs

Up to 50,000 puffs is the rating per set, meaning one module with its two containers. The total depends on draw length and power mode, so brief, gentle puffs get nearest to that number, whereas drawn-out pulls empty the containers sooner. Other high-count devices are gathered in Big Puff Vapes.

DTL and RDL Draw

These pods are calibrated for restricted direct-to-lung (RDL) and direct-to-lung (DTL) vaping, a looser pull than a cigarette-style draw. Adjustable airflow is supported once the module is seated in the device. No setting is locked in by a new module, so the draw is set again to taste.

How to Swap the Blueberry Mint Hypermax Prime Pods

A swap replaces the module and both containers together. The kit battery stays where it is, and no tools are needed.

Step 1: Unpack the new module and both Blueberry Mint containers.

Step 2: Pull the empty module off the battery of the Hypermax Prime 50K kit.

Step 3: Snap the two containers onto the fresh module until they click into place.

Step 4: Press the loaded module onto the battery until it clicks.

Step 5: Allow the kit to stand upright for several minutes after the containers are in place.

Step 6: Take gentle first draws, then adjust the airflow to taste.

What's in the Blueberry Mint Hypermax Prime Pods Pack

One set is made up of the two items below, and the larger packs repeat it.

• 1 x Snap Dual pod module, 2ml, with a 0.6ohm mesh coil inside
• 2 x 10ml Blueberry Mint containers, prefilled

Five modules and ten containers make up the middle size, and the largest holds double that. Refills are all these packs contain, so the Hypermax Prime 50K kit, its battery, and its cable are not included.

Devices Compatible With the Blueberry Mint Hypermax Prime Pods

One device takes these modules: the Al Fakher Hypermax Prime 50K kit. Anyone without one can pick a kit from Prefilled Pod Kits, and its battery carries over to every new set.

The Hypermax 30K pods, the Crown Bar 600, the Crown Bar Pro Max 12K and the Crown Bar Big Cloud are not compatible, so these modules do not fit them. A shared brand name on another device is no guide to fit either.

Both the kit and these pods are fully TPD compliant, and MHRA notified. The kit label should read Hypermax Prime 50K before an order is placed.

About Al Fakher and the Hypermax Prime 50K System

Two generations of Hypermax pods are stocked here, and each has its own module. The Snap Dual module described above is used by the Prime 50K. A different pod is used by the 30K range, so a pack from one generation cannot be fitted to a device from the other.

Fruit, ice and mint profiles all feature in the Prime list, with Blueberry Mint sitting beside other blueberry names such as Blueberry Gum and Blueberry Lemonade. Larger prefilled kits of this style are collected under Big Puff Pod Kits.

Stock Up on the Blueberry Mint Prime Pods

Ten swaps of Blueberry Mint are covered by the largest pack, and another Prime flavour can travel in the same parcel. Mixed baskets can start from Multi-Buy Vapes.

Plain, unbranded packaging is used for every order from Pirate Vapes, and dispatch waits until the age check is complete, since nicotine products are sold to adults over 18 only.

Conclusion

Adults who already run a Hypermax Prime 50K and like a blueberry flavour with a mint finish are the natural buyers of these Al Fakher pods. One set is enough to try the taste, while the larger packs keep spare modules ready.

Anyone still choosing a device can browse Vape Kits, while the rest of the catalogue can be reached from Pirate Vapes.

FAQs

Which kit do the Blueberry Mint Al Fakher 50K Hypermax Prime Refill Pods fit?

They are only compatible with the Al Fakher Hypermax Prime 50K kit. Packs made for the Hypermax 30K or the Crown Bar devices use other modules, so the Prime battery rejects them.

How many puffs do the Blueberry Mint 50K pods give?

Quoted at up to 50,000 puffs per set, the rating shifts with draw length and power mode. Brief, light draws approach that figure, and heavy pulls shorten it.

What is in one pack of Al Fakher Blueberry Mint pods?

A single pack contains one 2ml Snap Dual module with a mesh coil inside, plus two prefilled 10ml containers of Blueberry Mint. That makes 20ml of 20mg/ml nicotine salt e-liquid per pack, and the kit is bought separately.

Do the Pack Of 5 and Pack Of 10 differ from a single pack?

Quantity is the only difference. The Pack Of 5 supplies 5 modules and 10 containers, the Pack Of 10 supplies 10 modules and 20 containers, and the flavour, contents per set, and kit fit stay the same.

Can the Blueberry Mint Hypermax Prime 50000 pods be refilled by hand?

The containers are supplied prefilled, and a spent module is replaced as a whole. A fresh set is fitted to the kit instead of the old one being topped up.

Is a battery included with the Al Fakher Blueberry Mint vape pods?

No battery is supplied, since these packs replace parts of a kit that already has one. That battery is reused each time a new module is fitted, as with any Al Fakher Blueberry Mint vape refill.