Blueberry Raspberry Al Fakher 50K Hypermax Prime Refill Pods

Blueberry Raspberry Al Fakher 50K Hypermax Prime Refill Pods

Blueberry Raspberry Al Fakher 50K Hypermax Prime Refill Pods replace a used set on the Hypermax Prime 50K kit, with a ceiling of up to 50,000 puffs per pack. Every set pairs a 2ml Snap Dual pod module, mesh coil built in, with two 10ml containers of 20mg/ml nicotine salt e-liquid.

Only the Blueberry Raspberry flavour is covered here, in three quantities: one set, five, or ten. These pods are calibrated for restricted direct-to-lung (RDL) and direct-to-lung (DTL) vaping. Because the containers arrive prefilled, a spent set is swapped without measuring or pouring.

What to Know About the Blueberry Raspberry Hypermax Prime Pods

• One flavour, Blueberry Raspberry, in 3 pack sizes
• 1 Snap Dual pod module with a 0.6Ω mesh coil in every set
• 2 x 10ml prefilled containers (20ml in total) of 20mg/ml nicotine salt
• Up to 50,000 puffs per pack, with long draws lowering the total
• Fits the Hypermax Prime 50K kit only

Features of Blueberry Raspberry Al Fakher 50K Hypermax Prime Refill Pods

The flavour, coil module, containers, puff rating, and nicotine strength are covered below. All of them belong to the Replacement Pods range and apply to every pack size.

Blueberry Raspberry Flavour

Blueberry Raspberry is a dual-berry profile. Sweet, velvety blueberry leads, and a sharper, tart raspberry note arrives on the finish. The same flavour is carried by both containers in a set, so the taste stays steady from the first container to the second. Other Hypermax Prime flavours are listed as separate products.

Snap Dual Mesh Coil Module

A 2ml Snap Dual pod module is included in every set, with a 0.6Ω mesh coil housed inside it. The coil and pod are replaced together as one part, so no loose coil has to be bought. Adjustable airflow is supported when the module is seated in the device, and one battery is shared by every module fitted to the kit.

Two 10ml Containers

Two 10ml containers are supplied with each module, giving 20ml of refill e-liquid in total. 10ml is the largest size that UK rules allow for nicotine refills. Both containers arrive full and sealed. A swap stays free of pouring and measuring.

Up to 50,000 Puffs

The up to 50,000 puffs figure is a rating for each pack, and real totals depend on draw length and power mode. Short, light draws come closest to that rating, while e-liquid is used faster by long ones. Other high-count devices are collected under Big Puff Vapes.

20mg/ml Nicotine Salt

20mg/ml is the strength of the nicotine salt in every container, regardless of the quantity ordered. Both these pods and the Prime 50K kit are TPD compliant and MHRA notified. Because nicotine is addictive, buyers are expected to be adults with an existing nicotine habit. Bottled nic salts at 20mg/ml are sold in the 20mg Nic Salts collection.

How to Swap the Blueberry Raspberry Hypermax Prime Pods

A swap replaces the module and both containers together, and the battery stays on the kit.

Step 1: Unwrap the fresh module and both Blueberry Raspberry containers, taking off any protective film.

Step 2: Pull the spent module off the Hypermax Prime 50K kit.

Step 3: Click the two containers onto the new module until they sit firmly.

Step 4: Stand the loaded module upright for several minutes so that the mesh coil can be wetted with e-liquid.

Step 5: Press the module onto the kit until it seats, then take gentle first draws.

What's in the Blueberry Raspberry Hypermax Prime Pods Pack

Each set is complete on its own, and the larger packs hold more of the same.

• 1 x Snap Dual pod module (2ml), mesh coil inside
• 2 x 10ml prefilled Blueberry Raspberry containers

Five modules and ten containers are packed into a Pack Of 5, while ten modules and twenty containers fill a Pack Of 10. The Hypermax Prime 50K kit and its battery are not included, because these packs are refills only.

Devices Compatible With the Blueberry Raspberry Hypermax Prime Pods

Compatibility is limited to the Al Fakher Hypermax Prime 50K kit, which these pods are engineered for. A buyer without it can start with Prefilled Pod Kits.

Pods made for the Hypermax 30K kit cannot be fitted to the Prime 50K, and the same applies to Crown Bar devices. A shared Al Fakher name does not make another device suitable, so the model on the kit should be checked as Prime 50K before an order is placed.

About Al Fakher and the Hypermax Prime Berry Flavours

The Hypermax range is sold in two sizes, a 30K line and the Prime 50K line, and each one takes its own pods. Within the Prime 50K line, berry is a recurring theme, with Blueberry Cherry, Blueberry Mint, Blueberry Sour Raspberry and Mixed Berry listed alongside this one.

A change of flavour needs no new hardware, since one module and container format is shared by every set of Al Fakher vape pods in the Prime line. Kits built for long puff counts are gathered under Big Puff Pod Kits.

Stock Up on the Blueberry Raspberry Prime Pods

Daily users of the Prime 50K kit get through sets quickly, so the five-set and ten-set packs keep spare Hypermax Prime refills on hand. A contrasting berry such as Blueberry Sour Raspberry fits the same battery.

Dispatch from Pirate Vapes happens on the day of a Monday to Friday order if it is placed ahead of 3:30 pm, by Royal Mail Tracked 24. Any basket over £40 travels as Free Pirate Post. Age is verified on every order, so only over-18s can complete one.

Conclusion

Blueberry Raspberry Hypermax Prime pods suit adult nicotine users who already run the Prime 50K kit and want a plain berry flavour. The larger packs cover repeat swaps, while the kit itself is bought separately.

Hardware is gathered under Vape Kits, while the wider catalogue is browsed from the Pirate Vapes homepage.

FAQs

Which kit do the Blueberry Raspberry Hypermax Prime pods fit?

Only the Al Fakher Hypermax Prime 50K kit accepts these pods. Pods for the Hypermax 30K kit and for Crown Bar devices are separate products and cannot be used with the Prime battery.

How many puffs do the Al Fakher 50 K pods give in Blueberry Raspberry?

Each pack carries a ceiling of up to 50,000 puffs. Light, brief draws come close to that number, while long pulls drain the containers sooner, so results vary with draw length and power mode.

What is in one pack of Blueberry Raspberry Hypermax Prime pods?

One pack contains a 2ml Snap Dual pod module with a mesh coil inside, plus two sealed 10ml containers of Blueberry Raspberry nicotine salt e-liquid. The kit and its battery are sold separately.

What strength are the Blueberry Raspberry vape pods?

Every container is 20mg/ml, in salt form, and no UK vape may exceed that figure. Because of the nicotine content, orders are limited to buyers aged 18 or over.

Can the Blueberry Raspberry Hypermax Prime pods be refilled by hand?

The containers are supplied sealed and prefilled, and the module is replaced along with them. A fresh pack is fitted to the kit when a set runs out, instead of topping up the old one.

Do all three pack sizes hold the same flavour?

Every pack size carries Blueberry Raspberry. Only the number of complete sets changes, from one in a Pack Of 1 to ten in a Pack Of 10.