Classic Edition Pyne Pod Click 50K Vape Kit

Classic Edition Pyne Pod Click 50K Vape Kit

Three 2ml prefilled pods, three 10ml auto-refill containers, and a 750mAh battery make up the Classic Edition Pyne Pod Click 50K Vape Kit. All three pods hold 20mg/ml (2%) nic salt, and Normal mode is rated at up to 50,000 puffs. The rechargeable battery outlasts the first pod set, so the device carries on with fresh pods.

3 flavours are included, one per pod: Mr Blue, Blueberry Raspberry and Lemon Lime. Draw style follows the MTL Vape Kits pattern with a restricted inhale, and each empty pod is swapped for the next one.

What to Know About the Pyne Pod Click 50K Classic Edition

• Up to 50,000 puffs in Normal mode, up to 30,000 in Boost
• 3 × 2ml prefilled pods with 3 × 10ml auto-refill containers
• 20mg/ml (2%) nic salt in every pod
• 3 flavours: Mr Blue, Blueberry Raspberry, Lemon Lime
• Fires on the draw and charges via USB-C; lead not supplied

Features of Classic Edition Pyne Pod Click 50K Vape Kit

The features below are what keep one kit running through three pods. Each pod stays at the UK limit of 2ml, which is why the Click 50K sits among the Big Puff Pod Kits.

Three Prefilled 2ml Pods

Three prefilled pods are packed in each kit as a 3-in-1 pod system, one for every Classic Edition flavour. Pods are changed when empty, and the order is left to the user. Each pod is kept to the UK limit of 2ml, so a flavour can be switched without any liquid being poured or measured.

10ml Auto-Refill Containers

A 10ml container is supplied with each pod and clicks into the pod base. The liquid is 20mg Nic Salts strength at 20mg/ml. Because the containers come with the pods, no separate bottle is needed, and each finished pod attaches to the device magnetically.

750mAh Battery and OLED Screen

A 750mAh battery sits inside the device and recharges via the USB-C port, with fast charging supported, so the kit stays useful after the pods run out, like the other Rechargeable Vapes. An OLED screen reports battery level, e-liquid level, and power mode, so a refill or a charge is never a surprise.

Normal and Boost Modes

Two outputs are offered: Normal at 10W and Boost at 20W. The up to 50,000 puff rating is given for Normal mode, and Boost is rated at up to 30,000 puffs because more power is drawn with each inhale. Puff counts are estimates, and they vary with draw length.

Dual Mesh Coil and Draw Activation

Each pod arrives with a dual mesh coil already fitted, which takes coil changes out of the routine and spreads heat across the liquid. Airflow is restricted for a mouth-to-lung inhale, giving a tight, close pull. Heating starts with the inhale itself, so no firing button is needed.

How to Set Up the Pyne Pod Click 50K Classic Edition

One short priming move is needed before the first draw, and every later pod change follows the same five steps.

Step 1: Take the device, one pod, and its 10ml auto-refill container out of the box. Any of the three flavours can be started first.

Step 2: Push the 10ml container into the pod's base until it clicks.

Step 3: Flip the assembled pod and container upside down for a moment before first use. This primes the dual mesh coil and helps prevent dry hits.

Step 4: Attach the pod to the device. The device is charged over USB-C if the OLED screen shows a low battery, and as no cable is supplied, one from the Charging Cables range may be needed.

Step 5: Draw gently on the mouthpiece, starting in Normal mode. When the first pod is empty, the next one is fitted in its place, and each container stays with its own pod.

What's in the Classic Edition Kit Box

The box is packed with the device, the pods, and the containers needed to reach the rated puff count.

• 1 × 750mAh battery device
• 3 × 2ml prefilled pods (Mr Blue, Blueberry Raspberry, Lemon Lime)
• 3 × 10ml auto-refill containers
• 1 × user manual

Left out of the box: a USB-C cable and any pods beyond the three. The larger packs hold five and ten of these kits.

Pods Compatible With the Pyne Pod Click 50K Classic Edition

Fresh pods for this kit are sold as Click 50K refill packs, one 2ml pod to every 10ml container. They are grouped under Replacement Pods.

Pods from the Click 10K and Click S 30K ranges belong to their own devices, because the Click 50K is a separate pod system. The Classic Edition kit is a complete starter, and no other device is needed to use it.

About Pyne Pod and the Click Range

Pyne Pod sells the Click line as a device bundled with sets of pods, and the 50K sits beside the Click 10K and the Click S 30K.

Each 50K kit is built around a single edition, so the Classic Edition carries a fixed trio of flavours rather than a pick-your-own selection. Other editions of the 50K come with their own three flavours, which gives a second kit a different mix.

Stock Up and Delivery

Spare Click 50K pod sets are the obvious second purchase, and a charging lead belongs in the same basket because the kit ships without one. Free Pirate Post covers orders above £40.

Same-day Tracked 24 dispatch at Pirate Vapes applies to orders placed before 3:30 pm on weekdays, and age verification at checkout limits every sale to over-18s.

Conclusion

The Classic Edition Pyne Pod Click 50K suits anyone after three flavours and a long rated life from a single device. Matching Click 50K pods are used when the first set runs out.

More long-life kits are listed under Big Puff Vapes, and the wider range sits at Pirate Vapes.

FAQs

How many puffs does the Classic Edition Pyne Pod Click 50K last?

Up to 50,000 puffs are rated for Normal mode, and up to 30,000 for Boost mode. Actual numbers depend on draw length, so shorter draws stretch the total further. The rating applies to the whole box of three pods, not to a single pod.

What are the Pyne Pod Classic Edition flavours in the Click 50K kit?

Mr Blue, Blueberry Raspberry and Lemon Lime make up the Classic Edition, with one prefilled pod supplied for each. Other flavours cannot be swapped in within the same pack.

Is a charger included with the Pyne Pod Click 50K Classic Edition?

The kit ships without a charging cable. A lead for the USB-C port must be bought separately or borrowed from another device, and the 750mAh battery recharges through it once connected.

Can the Pyne 50k vape be used again once the pods are empty?

Empty pods are replaced with new Click 50K refill packs while the battery device is charged and reused. Pods from the Click 10K and Click S 30K ranges are not part of this system.

How are Normal and Boost modes used on this Pyne Pod vape?

Normal mode runs at 10W and Boost mode at 20W, with the active mode shown on the OLED screen. Heating starts on the draw, so no firing button is pressed, and Normal suits longer use because Boost lowers the puff rating.

What is the difference between Pack Of 1, Pack Of 5 and Pack Of 10 for the Pyne Pod 50k kit?

Each size holds the same Classic Edition kit, in quantities of 1, 5, or 10. Every kit carries three pods and three containers, so the larger packs simply add more of the same set.