Dotmod Dotbox 100W Vape Mod Kit

Dotmod Dotbox 100W Vape Mod Kit

100W from a single 21700, in a leather-and-metal body that looks a cut above the usual box mod. The Dotmod dotBox pairs a full 5W to 100W output with the dotTank Max and two press-fit DotCoils, a 0.15Ω for DTL clouds and a 0.3Ω for a restricted lung draw. It carries a proper 510 thread, an IP67 waterproof and dustproof rating, and a colour screen with a fire button plus a smart Auto mode that prevents burnt coils.

The tank runs at 2ml for the UK and top-fills through a quarter-turn cap. The catch worth stating up front: the battery is not included, so you supply the cell. One of the more premium Box Mods on the shelf, and a standout among 510 Vape Kits at this size.

Why vapers choose this kit:

• Premium build, not plastic. Dotmod put a leather side panel on a zinc alloy frame and rated the whole thing IP67, so it shrugs off splashes and dust in a way most box mods simply do not.

• A real 100W from one 21700, with six output modes including temperature control.

• Two DotCoils covering DTL and RDL out of the box.

• 510 thread. Fit other atomisers up to 27mm, not just the DotTank Max.

• Swappable battery. Carry a charged spare and never wait on a cable.

Dotmod Dotbox 100W Features

Durable Zinc Alloy Build With IP67 Protection

The dotBox is the point of difference here. Where most single-cell mods feel disposable, this one has a zinc alloy chassis, a leather insert marked with the brand, and an engraved fire switch. The IP67 rating means it is sealed against water and dust, so it handles a rained-on walk or a dusty worksite. It is a mod built to be owned for years, not replaced in months.

Two Mesh Coils for DTL and RDL

Both are mesh DotCoils, and they aim at opposite ends. The 0.15Ω is the high-power coil, happiest well up the range for warm DTL clouds, and pairs with High VG E-Liquid. The 0.3Ω sits lower, around 20W to 40W, for a tighter restricted lung draw. One kit, two distinct sessions, and the DotCoil range runs across several Dotmod devices so replacements are easy. Keep a few spare Replacement Vape Coils handy, and the flavour stays fresh.

Supports 21700 or 18650 Batteries

Worth repeating: the dotBox needs a single 21700, or an 18650 with the adapter, and neither is supplied. Because hitting 100W asks a massive amount of a battery, we strongly recommend using a high-drain 21700 cell with a continuous discharge rating of at least 30A (such as a Molicel P42A or P45B). We stock suitable vape batteries and battery chargers separately, and an external charger is the safest way to top up a removable cell. Never carry a loose battery in a pocket with keys or coins. Every Pirate Vapes order is checked before it ships.

Leak-Resistant Top-Fill Tank

The dotTank Max top-fills through a quarter-turn cap and adjusts airflow from a top ring, which keeps leaks down. A clever internal seal lets you swap the coil without emptying the tank, so a coil change is not the mess it usually is. It wears an 810 drip tip and runs the UK 2ml glass, with the airflow open for DTL or pulled back for RDL. Small touches, but they add up to a tank that behaves.

Six Modes for Flexible Vaping

Beyond straight wattage, the dotBox offers direct voltage, a smart Auto mode (which automatically sets the perfect wattage for your fitted coil), a custom curve, a boost setting, and temperature control. Most vapers will live in Power or Auto mode, but the options are there when you want them. TC needs a nickel, titanium, or stainless steel coil to work, so keep that in mind before switching over.

Dotmod Dotbox 100W Colours

Seven finishes in the store picker, all sharing the same zinc alloy frame and leather side panel. The choice is cosmetic; every colour runs identical hardware.

#buttons

• Black
• Blue
• Brown
• Gray
• Orange
• Red

How to Set Up the Dotmod Dotbox 100W

First run takes a few minutes once you have a charged cell ready.

1. Fit a charged 21700 (or an 18650 using the included adapter sleeve) into the battery bay, matching the plus and minus markings.

2. Press-fit your chosen DotCoil into the base of the dotTank Max. The 0.3Ω for RDL, or the 0.15Ω for DTL.

3. Prime it by trickling a few drops of e-liquid onto the coil's exposed side cotton, and place a couple of drops directly down the top centre hole onto the mesh element itself.

4. Fit the tank together, quarter-turn the top cap open, fill the tank with your high-VG e-liquid, and close it.

5. Set your wattage to match the coil (70W–90W for the 0.15Ω, or 25W–40W for the 0.3Ω).

6. Leave the filled tank standing upright for five to ten minutes so the mesh soaks through completely. A dry first pull ruins a coil instantly.

7. Open the top airflow to suit, and start with gentle draws before settling in.

What's in the Dotmod Dotbox 100W Box

The kit includes:

• The dotBox mod,

• the dotTank Max,

• a 0.15Ω DotCoil,

• a 0.3Ω DotCoil,

• a replacement glass tube,

• a spare O-ring set,

• 18650 Adapter

• a USB-C cable,

• and a manual.

What is not in the box: the 21700 or 18650 battery, which you buy separately, and e-liquid.

About Dotmod

Dotmod is a California brand with a reputation for design-led, premium hardware: the dotAIO, the dotStick, and a line of well-regarded RTAs, all built with a fashion-forward, metal-and-leather aesthetic that stands apart from the usual black plastic.

The dotBox brings that look to a single-cell 100W box mod, sealed to IP67 and finished properly. Underneath sits the shared DotCoil platform, the same coil family used across Dotmod's other devices, which keeps coil supply simple. It is a brand vapers buy when they want a device that feels like an object, not just a tool.

Stock Up and Save

Once you own the dotBox, the running cost is low: the occasional DotCoil, a spare glass now and then, and a charged 21700 in reserve. The Crow's Nest subscription can handle coil reorders so you are never caught out.

Every order from Pirate Vapes ships same day before 4 pm, TPD compliant, age-verified checkout, over-18s only. Free Pirate Post applies over £40.

Conclusion

The Dotmod dotBox 100W is a premium single-cell kit that punches above its size: a full 100W from one 21700, an IP67-sealed leather-and-metal body, a top-fill 2ml dotTank Max, and two DotCoils covering RDL through to DTL.

It suits vapers who want a standalone 510 mod that looks and feels the part, as long as they are happy to supply their own cell. Pick the 0.3Ω for a restricted draw or the 0.15Ω for clouds, and browse more Rechargeable Vape Kits, Vape Accessories, and the full range at Pirate Vapes.

FAQs

Does the dotBox come with a battery?

No. It uses a single 21700, or an 18650 with the adapter, and neither is included. Use a quality high-drain cell.

What coils does the dotBox use?

Dotmod DotCoils, press-fit. A 0.15Ω DTL and a 0.3Ω RDL come in the box, and the wider DotCoil range fits too.

How much e-liquid does the dotBox tank hold?

The UK dotTank Max holds 2ml and top-fills through a quarter-turn cap.

Is the dotBox really waterproof?

It carries an IP67 rating, meaning it resists dust and brief water immersion. It is not built for submersion by design, but it shrugs off splashes and rain.

Can I use temperature control in the dotBox?

Yes, the dotBox has a TC mode, but it needs a nickel, titanium, or stainless steel coil to work. The included mesh coils run in power mode.

Is the dotBox a proper 510 mod?

It is. The 510 thread takes atomisers up to 27mm, so the dotBox works well beyond just the dotTank Max.