Elux Cyberover P1 Replacement Pods

Elux Cyberover P1 Replacement Pods

Genuine refillable pods built for the Elux Cyberover P1, sold in packs of four. Each pod holds 2ml of e-liquid behind a dual mesh coil, with three resistance options covering MTL through to a warmer RDTL draw.

Top-fill design through the red filling port, a magnetic connection that locks in without fiddling, and full TPD compliance at UK capacity limits. If your Cyberover P1's original pod has gone stale, this is the genuine replacement. Stock up on the Replacement Pods range.

Why vapers choose this:

• Genuine dual mesh coils built specifically for the Cyberover P1, not a generic third-party fit.

• Available in three resistance options across the range, allowing you to dial in a tight MTL, a balanced middle ground, or a warmer RDTL draw without switching devices.

• Top-fill through the red port means no need to fully remove the pod to refill mid-session.

• Magnetic connection seats the pod correctly every time, with no misalignment or leaking from a loose fit.

• 2ml capacity sits exactly at UK TPD limits, so there is nothing to worry about on the compliance side.

Elux Cyberover P1 Replacement Pods Features

Dual Mesh Where It Actually Matters

A single mesh strip does the job on cheaper pods, but dual mesh spreads heat across two coil surfaces instead of one. More consistent vapour from the first draw to the last, and less flavour drop-off once a fill passes the halfway point.

Three Resistances, Three Different Vapes

The 0.4Ω pod runs warmer and pushes more vapour, closer to an RDTL draw. The 0.6Ω sits in the middle and is the pod most Cyberover P1 kits ship with as standard. The 0.8Ω tightens the draw right down for a proper MTL feel. Worth trying more than one if you are still working out which style suits you.

Red Port, No Guesswork

Elux colour-coded the fill port red specifically so it stands out against the pod body. Lift the mouthpiece, tip the bottle in, done. No squinting to find a hidden seam or prying at a stiff silicone flap.

A Magnetic Fit That Actually Holds

The pod clicks into the Cyberover P1 device via a magnetic connection strong enough to stay seated through normal use, but light enough to release with a gentle pull when it is time to swap. No twisting, no listening for a click that may or may not have happened. Elux engineered the fit to be tool-free from day one.

Built to Handle Both Sides of Your Rotation

Whether you run 50/50 nic salts for a tighter MTL hit or a lower-strength freebase blend through the 0.4Ω for bigger clouds, the coil range across these three resistances covers both ends without needing a second device. That flexibility is the main reason to pick up more than one resistance at a time.

Elux Cyberover P1 Replacement Pods Resistance Options

Choose from three resistance options to match your preferred draw style. All pods fit the same Cyberover P1 device.

#buttons

• 0.4Ω
• 0.6Ω
• 0.8Ω

How to Set Up the Elux Cyberover P1 Replacement Pods

Quick top-fill swap. Under two minutes once you have done it once.

1. Pull the spent pod away from the device. The magnetic connection releases with a firm, steady tug upward.

2. Lift the mouthpiece on the new pod to expose the red filling port underneath.

3. Fill with your chosen e-liquid up to the marked line, keeping the bottle tip clear of the airflow channel.

4. Replace the mouthpiece and wipe away any liquid that has pooled around the fill port.

5. Let the pod sit for five minutes before fitting it to the device. The dual mesh coil needs that time to fully wet through, and a rushed first draw leaves a scorched taste that never quite clears.

6. Click the pod back onto the device. The magnets pull it into alignment automatically. No pressing or twisting needed.

What's in the Elux Cyberover P1 Replacement Pods Box

Four pods per pack, in your chosen resistance. No e-liquid, no device, no charging cable. This is a standalone accessory pack for existing Cyberover P1 owners. If you need liquid to go with it, the refills and pods range covers nic salts and freebase across every strength.

Made Specifically for the Elux Cyberover P1

These pods are built for one device: the Elux Cyberover P1, part of Elux's Rechargeable Vapes range. The magnetic base, fill mechanism, and coil housing are matched to that device's internals and will not seat correctly on anything else.

They do not fit older Elux pod systems, other brands' devices, or disposables. If your device is branded Cyberover P1 and the pod slots in flush with the mouthpiece facing outward, you have the right part.

About Elux

Elux has spent several years building a reputation in the UK disposable and pod market, with the Cyberover line among their current pod system releases. The P1 was designed around swappable, refillable pods rather than a single-use cartridge, giving the device a longer working life than a standard disposable while keeping the simplicity vapers expect.

Elux backs the Cyberover range with full TPD-Compliant Vape manufacturing standards, and the three-resistance pod system is one of the more flexible setups available in a compact pod format.

Stock Up and Save

A pack of four pods covers most Cyberover P1 owners for several weeks of regular use, so it is worth keeping a spare pack on hand. Pirate Vapes dispatches every order same-day before 4 pm, with pods packed to avoid contact damage in transit.

All stock is TPD compliant, sold through an age-verified checkout, and restricted to over-18s only. Spend over £25 for Free Pirate Post. Browse the wider Vape Accessories range while you are there.

Conclusion

The Elux Cyberover P1 Replacement Pods keep a working device running long past its original pod's lifespan. Genuine dual mesh coils, three resistance options covering MTL through to RDTL, and a magnetic top-fill design that is quicker than most competitors in this category.

If your Cyberover P1 still charges and fires but the flavour has dropped off, this pack solves it without buying a new kit. Pick up a pack, or grab all three resistances to cover every mood, from Pirate Vapes.

FAQs

Do these pods come filled with e-liquid?

No. They ship empty. Fill through the red top port with any e-liquid suited to your chosen resistance.

Which resistance should I start with?

The 0.6Ω is the factory default and the safest starting point. Try the 0.4Ω for bigger clouds or the 0.8Ω for a tighter MTL draw once you know your preference.

Will these pods fit other Elux devices?

No. They are built specifically for the Cyberover P1. Other Elux pod systems use different connections and pod shapes.

How many pods are in a pack?

Four pods per pack, all in the resistance you select at checkout.

How long does the coil need to soak before first use?

Five minutes with the pod sitting upright after filling. Skipping this step risks a burnt first draw that damages the mesh.