Geekvape Aegis Force Replacement Pods

Empty pods. No coils inside. You buy the coils separately and drop them in yourself. The Aegis Force pods hold 2ml in UK TPD trim and work exclusively with the Geekvape Aegis Force Kit and its 3200mAh battery. Each pod ships with a DTL drip tip pre-installed plus a spare MTL drip tip in the pack, so you can switch draw styles without buying extra parts.

The pods accept the full Geekvape B Series coil range from 0.15 ohm right through to 1.2 ohm, which covers everything from wide-open DTL at 80W down to tight MTL at 12W. Top airflow, leakproof. Over 18s only.

Why vapers choose this:

• Two pods and two drip tip styles in one pack. DTL tips pre-fitted, MTL tip included as spare.

• Full B Series coil compatibility from 0.15 ohm DTL mesh to 1.2 ohm MTL round wire

• Top airflow with leakproof construction. Liquid stays in the pod, not on your mod.

• 2ml UK TPD capacity with a top-fill port for quick refills

• Made exclusively for the Aegis Force Kit and its rugged, IP-rated 3200mAh chassis

Geekvape Aegis Force Replacement Pods Features

Two Drip Tips Per Pack Means Two Draw Styles

Each pod arrives with a DTL drip tip already sitting in it. Wider bore, more airflow, suited to the 0.15 to 0.6 ohm B Series coils at 30W and above. The pack also includes a separate MTL drip tip with a narrower bore for tighter, cigarette-style draws using the 0.8 or 1.2 ohm coils. Swap between them depending on your mood, your liquid, or the time of day. No extra purchase required.

Seven Coil Resistances From One Coil Platform

The B Series range runs deep. 0.15, 0.2, 0.3, 0.4, and 0.6 ohm for DTL vapers chasing cloud and flavour at higher wattages. 0.8 and 1.2 ohm for MTL users running Nic Salts at lower power. All of them slot into the same pod. That kind of resistance spread from a single coil platform is unusual, and it means one pack of pods serves you regardless of how your vaping preferences shift over time.

Top Airflow Keeps Liquid Where It Belongs

Bottom-airflow pods leak. Not always, not every time, but often enough that most experienced vapers have dealt with sticky pockets and flooded contacts. Geekvape moved the airflow intake to the top of the pod, which physically prevents liquid from reaching the air path by gravity alone. The seal is tight, the pod sits firmly in the Aegis Force chassis, and condensation buildup is noticeably less than on bottom-airflow designs.

2ml TPD With a Sensible Fill Port

The UK version holds 2ml in line with TPD regulations. The fill port is positioned at the top of the pod with a silicone plug. Pull it open, pour in your e-liquid, push it closed. Straightforward, no mess, no angled nozzle tricks. The pod fills quickly and the plug seals cleanly.

Built for the Aegis Force and Nothing Else

These pods fit the Geekvape Aegis Force Kit with its 3200mAh battery, 80W output, Smart Mode, and temperature control. They do not fit the Aegis Legend, Aegis Mini, Aegis X, Aegis Hero, Aegis Nano, or any other Aegis device. The naming can be confusing because Geekvape has about a dozen products in the Aegis family. Check that your device is the Aegis Force before ordering.

Geekvape Aegis Force Replacement Pods Compatible Coil Options

These pods ship empty. You choose your B Series coil based on how you vape. Here is the full range that fits:

DTL coils (higher wattage, more vapour):

• 0.15 ohm B Series Mesh: Maximum vapour and flavour. Runs at 60 to 80W.

• 0.2 ohm B Series Mesh: Slightly tighter than the 0.15. 50 to 70W.

• 0.3 ohm B Series Mesh: Mid-range DTL. 40 to 60W.

• 0.4 ohm B Series Mesh: Restricted DTL. 30 to 50W.

• 0.6 ohm B Series: Crossover resistance. 20 to 35W. Works for looser MTL or restricted DTL.

MTL coils (lower wattage, tighter draw):

• 0.8 ohm B Series: Standard MTL. 12 to 20W. Pairs well with 10mg nic salts.

• 1.2 ohm B Series: Tight MTL. 10 to 15W. Best with 20mg nic salts.

How to Set Up the Geekvape Aegis Force Replacement Pods 

1. Insert a B Series coil. Turn the pod over. The coil slots in from the base. Push firmly until it clicks into place. Make sure the coil is seated fully and not sitting at an angle.

2. Prime the coil. Before you fill, drop three or four blobs of e-liquid directly onto the cotton visible through the coil's mesh or wire openings. This pre-saturates the cotton and prevents a scorched first draw. Mesh coils in particular burn fast on dry cotton.

3. Fill the pod. Flip the pod right-side up. Open the top-fill silicone plug. Pour in your e-liquid. Close the plug flat. Stand the pod upright for five minutes and let the coil soak fully before you draw.

4. Choose your drip tip. The DTL tip is already fitted. If you are running a 0.8 or 1.2 ohm coil for MTL, swap it out for the narrower MTL tip from the pack.

5. Click it into the Aegis Force and go. The pod locks magnetically into the device. The Aegis Force reads the coil resistance and adjusts output through Smart Mode, or you set wattage manually.

What's in the Geekvape Aegis Force Replacement Pods  Box

• Two empty Aegis Force cartridge pods (2ml TPD each). 

• Two DTL drip tips already fitted to the pods. 

• One spare MTL drip tip. 

• A manual warning sheet. 

No coils included. No e-liquid. You need B Series Coils and e-liquid purchased separately.

Made Exclusively for the Geekvape Aegis Force Kit

The Aegis Force pods work with one device: the Geekvape Aegis Force Kit with its 3200mAh battery and 80W maximum output. The pod connection, the coil fitment, and the airflow path are all designed specifically for that chassis. No other Aegis model accepts these pods.

The coil platform is the Geekvape B Series, which is also used in the Aegis Boost 2, Aegis Hero 2, and other B-Series-compatible Geekvape devices. The coils are cross-compatible even though the pods are not. If you already own B Series coils from another Geekvape kit, they fit these pods.

E-liquid pairing depends on your coil. DTL coils (0.15 to 0.6 ohm): use 70/30 Shortfills at 3 to 6mg freebase. MTL coils (0.8 to 1.2 ohm): use 50/50 nic salts at 10 to 20mg.

About Geekvape

Geekvape is headquartered in Shenzhen, China, and built its name on the Aegis series, which was one of the first vape platforms to carry genuine IP68 waterproof, dustproof, and shockproof ratings.

The brand now runs several coil platforms (B Series, G Series, P Series), multiple tank lines including the Zeus range, and pod kits from the Wenax and Sonder families. The Aegis Force is the newest addition to the Aegis lineup, pairing a 3200mAh battery with 80W output and Smart Mode. Browse the full Geekvape Range at Pirate Vapes.

Stock Up and Save

Two pods per pack gets you started, but coils wear out faster than pods do. Grabbing a spare pack of pods and a five-pack of B Series coils in your preferred resistance means you are sorted for several weeks. We ship every accessory order sealed and padded to prevent damage to the drip tips and pod contacts. Age-verified checkout, same-day dispatch before 4 pm, full tracking. Over 18s only. Spend over £25 and delivery is free with Free Pirate Vapes.

Conclusion

Replacement Pods for a specific device. That is all these are, and that is all they need to be. Two empty Aegis Force cartridge pods, two DTL drip tips, one MTL drip tip, and compatibility with the entire B Series coil range from 0.15 to 1.2 ohm.

Top airflow that does not leak. 2ml TPD capacity. If you own the Aegis Force Kit and your current pods are wearing down, stained, or cracked, this is the pack. Nothing more complicated than that. Available at Pirate Vapes.

FAQs

Do the Aegis Force Pods come with coils?

No. Empty pods only. B Series coils are purchased separately. Make sure you have coils on hand before the pods arrive, or you will have nothing to vape through.

What coils fit the Aegis Force Pods?

The full Geekvape B Series range. 0.15, 0.2, 0.3, 0.4, 0.6 ohm for DTL. 0.8 and 1.2 ohm for MTL. All slot into the same pod.

What devices are the Aegis Force Pods compatible with?

The Geekvape Aegis Force Kit only. These pods do not fit the Aegis Legend, Aegis Mini, Aegis X, Aegis Hero, Aegis Nano, or any other Aegis device.

How much liquid do the Aegis Force Pods hold?

2ml in the UK TPD version. The international version holds 5ml but is not sold in the UK.

What drip tips come in the Aegis Force Pods pack?

Two DTL drip tips (pre-fitted to the pods) and one spare MTL drip tip. Swap them depending on your coil choice and draw preference.