Geekvape Aegis Solo 2 S100 Vape Mod

Geekvape Aegis Solo 2 S100 Vape Mod

100W of regulated power from a single 18650, wrapped in a shell you can genuinely knock about. The Geekvape Aegis Solo 2 S100 is the second generation of the single-battery Aegis Solo, built around Geekvape's IP68 tri-proof design for water, dust and shock resistance.

A 510 connection means it runs almost any sub-ohm tank or rebuildable you already own, and a bright 1.08-inch colour screen keeps your wattage and battery clearly in view. This is the Box Mod version, sold without a cell, so you will need an 18650 Battery to pair with it. Rugged, compact, and refreshingly simple to run.

Why vapers choose this mod:

• IP68 tri-proof build is the headline here. Second-generation sealing shrugs off rain, dust and the knocks that finish off lesser mods, which is a big part of why the Aegis name has the following it does among outdoor and trade users.

• Single 18650 power keeps the device pocket-sized while still reaching a full 100W. Drop in a charged cell, and you are straight back to vaping.

• 510 connection leaves you free to run whatever tank you like, from a fresh mesh sub-ohm to an old favourite rebuildable.

• A-Lock switch stops the fire button going off in your pocket. Physical, simple, effective.

• Clear 1.08-inch screen shows wattage, resistance and battery at a glance, with an interface that does not need the manual to read.

Geekvape Aegis Solo 2 S100 Features

Tri-Proof Is Not Just Marketing

The IP68 rating means the S100 is sealed against dust ingress and rated for water immersion, not merely the odd splash. Geekvape's second-generation tri-proof tech builds shock absorption into the chassis itself. Drop it on site, get caught in the rain, leave it rattling in a toolbox: it keeps working. That durability is the whole reason people reach for an Aegis.

One Battery, Full Power?

Yes, and that is the appeal. A single high-drain 18650 pushes the mod to its 100W ceiling without the bulk of a two-cell device. You trade a little runtime for something smaller and lighter, which for plenty of vapers is exactly the right call. Just use a quality cell with an undamaged wrap.

Open 510, Your Choice of Tank

The threaded 510 connection is deliberately old-school. Fit a low-resistance mesh tank for clouds, a rebuildable for tinkering, or a tighter tank for MTL. It handles the lot across that 0.1 to 3.0ohm range. Browse the DTL Tanks collection if you are building a sub-ohm setup from scratch.

Lock It and Forget It

Flick the A-Lock switch, and the fire button and adjustment keys go dead. No more phantom firing in a bag, no accidental wattage creep while it knocks around your pocket. It is a mechanical switch rather than a button combination, so it is quick to use and genuinely hard to trigger by mistake.

A Screen You Can Actually Read

The 1.08-inch colour display is a real step up from the dim little screens on older single-battery mods. Wattage, coil resistance, battery level and mode are all laid out clearly, and the refreshed interface is easy to move through with the two adjustment buttons. A small quality-of-life detail, but you notice it every day.

Geekvape Aegis Solo 2 S100 Colours

Six finishes, all sharing the same tough zinc-alloy frame. The bolder colours and the more understated ones tend to sell through at different rates, so availability can shift.

#buttons

• Classic Black
• Grey
• Navy Blue
• Rainbow
• Red
• Silver

How to Set Up the Geekvape Aegis Solo 2 S100

First-time setup takes a couple of minutes.

1. Fit the battery. Open the threaded base cap and drop in a single, fully charged 18650, matching the positive and negative markings printed inside the bay. Use a cell with an intact wrap.

2. Attach your tank. Screw a 510 tank onto the top connection until it sits flush and snug. Do not push it past finger-tight.

3. Wake the device with five quick presses of the fire button. The screen lights up and shows your current mode.

4. Unlock the controls. Slide the A-Lock switch to the unlocked position so the fire and adjustment buttons respond.

5. Set the wattage to sit inside your coil's printed range. If you have just fitted a new coil, dampen the wicking ports first and give it two or three minutes to soak before firing, so you never scorch dry cotton.

6. Fire and adjust in small steps until the draw feels right for your tank and liquid.

What's in the Geekvape Aegis Solo 2 S100 Box

• The S100 mod,

• a USB Type-C charging cable,

• and a user manual.

That is the lot. There is no 18650 battery in the box, no tank, and no coils, since this is the mod-only version. You will need to supply a cell and a 510 tank to get vaping.

Runs Almost Any 510 Tank You Own

The S100 uses a standard threaded 510 connection, which is about as universal as vape fittings get. It happily powers low-resistance mesh sub-ohm tanks, rebuildable atomisers and tighter MTL tanks, covering both direct-to-lung clouds and mouth-to-lung sipping depending on what you fit. It pairs naturally with Geekvape's own Z-series tanks, though you are not tied to the brand. Explore the wider Geekvape Range for matching tanks, or grab a spare lead from Chargers And Cables.

Two things it will not do: it cannot take a battery larger than an 18650, and it is not a pod system, so there are no click-in pods here. This is a traditional 510 box mod. In the UK, pair it with a 2ml TPD-compliant tank.

About Geekvape

Geekvape has spent years refining one idea: a device you do not have to baby. The Aegis Solo line is the single-battery branch of that project, and the S100 is its second generation. Where a lot of 100W mods chase spec-sheet numbers, the Solo 2 puts its engineering into the tri-proof shell, the IP68 seal, and a chip that behaves the same way day after day.

It is a 510 mod in the traditional sense, so it stays open to whatever tank you want to run on top. Every Aegis Solo 2 sold through Pirate Vapes is genuine Geekvape stock.

Stock Up and Save

A mod on its own does not vape. To get going, you will need a single 18650 and a 510 tank, and it is worth keeping a spare charged cell so you are never caught flat.

Pirate Vapes ships every order in padded packaging with tracked delivery, dispatched the same day on orders placed before 4 pm. Checkout is age-verified and strictly for over-18s. Spend over £40, and postage is covered by Free Pirate Post.

Conclusion

The Aegis Solo 2 S100 is a sensible, hard-wearing single-battery mod for anyone who wants 100W and a rugged build without the weight of a dual-cell device. The IP68 tri-proof shell, open 510 top and clear colour screen make it easy to recommend to newer sub-ohm vapers and seasoned tinkerers alike.

Add a quality 18650 and the tank of your choice, and you have a setup that will take a beating. Pick up matching Vape Accessories or browse the full mod range at Pirate Vapes.

FAQs

Does the S100 come with a battery?

No. It takes a single 18650 cell, sold separately. It is also the mod-only version, so there is no tank or coil in the box either.

What tanks fit the Aegis Solo 2?

Any 510-threaded tank. Sub-ohm mesh tanks, rebuildables, and MTL tanks all work, and it pairs well with Geekvape's Z-series. In the UK, use a 2ml tank.

How powerful is the S100?

It outputs up to 100W in power mode, across a resistance range of 0.1 to 3.0ohm. That covers everything from tight MTL coils to low-resistance cloud tanks.

Is the Solo 2 actually waterproof?

It carries an IP68 rating for water and dust resistance, plus shock-resistant construction, so it survives drops, rain, and dust far better than a standard mod. It is still electronics, so do not take it swimming.

How do I charge the S100?

Through the USB Type-C port under the flip cover. For battery health, most experienced users charge their 18650 in a dedicated external charger rather than in the device.

What does the A-Lock switch do in the S100?

It physically locks the fire and adjustment buttons so the mod cannot fire or change settings by accident. Flick it back to unlock.