Geekvape E100 Vape Kit

Geekvape E100 Vape Kit

A 100W pod mod that runs on a swappable 18650 battery and takes a refillable 2ml pod. That combination is what sets it apart. The Geekvape E100, part of the Aegis Eteno line, pairs the smart AS-Chip 3.0 with an IP68 tri-proof build for water, dust, and shock resistance. It fills from the top, controls airflow from the top, and takes Geekvape P Series coils for proper sub-ohm clouds.

Two coils come in the box. One thing to know up front: the 18650 cell is sold separately, so you choose your own battery. A rugged, flexible option among refillable Pod Kits.

Why vapers choose this:

• A battery you can swap. When the 18650 runs flat, drop in a charged spare and keep going. No waiting around for a built-in cell to charge, which is the trade-off you make with sealed devices.

• IP68 tough. Rain, dust and drops are not the problem they are for flimsier mods.

• Smart coil recognition sets the wattage for you, so you are far less likely to burn a coil.

• Top-fill, top-airflow pod keeps liquid away from the base and cuts leaking.

• 100W with two P coils covers warm clouds out of the box and gives you room to fine-tune.

Geekvape E100 Features

The Removable Battery Is the Whole Point

Most pod mods this size use a sealed cell. The E100 does not. It takes a single 18650 you can pull and replace, so a flat battery means a ten-second swap rather than an hour on charge. You will need to buy the cell separately, which is worth knowing before you order. Grab a quality 18650 Vape Batteries option to go with it.

How Smart Is AS-Chip 3.0, Really?

Smarter than most. The chip runs intelligent atomizer recognition, reading the resistance of whichever P coil is fitted and setting a safe wattage automatically. Beyond that, you get a spread of modes from Smart and Power through to full temperature control. For anyone who just wants to fill and vape, Smart mode does the thinking.

Built Tough, Top to Bottom

Geekvape's second-generation tri-proof engineering earns the IP68 rating: sealed against water and dust, and shock-resistant enough to survive the drops that finish off cheaper mods. The zinc-alloy body sits under a soft silicone wrap, so it takes knocks without feeling like a brick in the hand.

Fill It From the Top, Forget About Leaks

The Eteno pod uses a quarter-turn top-fill cap and a dual-slotted top airflow ring. Filling from the top and drawing air from the top keeps liquid away from the battery contacts, which is the usual cause of a leaky pod. The pod itself is BPA-free PCTG, and it is refillable rather than disposable.

P Coils Do the Flavour

Everything rides on the P Series coils. The pre-installed 0.2ohm at 60-70W is the cloud-and-flavour setting, while the spare 0.4ohm at 50-60W pulls things in a little. Both are mesh KA1, built for thicker juice, so pair them with High VG E-Liquids. Fresh Geekvape P Series Coils drop straight in when the taste fades.

Geekvape E100 Colours

Six colours in the E100 range, each with a silicone-wrapped body and the classic Aegis look. From understated to loud.

#buttons

• Beige
• Black
• Blue
• Rainbow
• Red
• Volcanic Grey

How to Set Up the Geekvape E100

Ten minutes start to finish, most of it just waiting for the coil.

1. Insert a fully charged 18650 into the battery bay. Remember, the cell is not included.

2. Pull the pod off and press a P coil firmly into the base until it seats.

3. Drip 4 to 5 drops of e-liquid onto the coil ports to wet the cotton before filling.

4. Open the quarter-turn top cap and fill the pod with your high-VG juice, then close it firmly.

5. Snap the pod back on and let it stand for a full 8 minutes until the cotton is properly saturated. No rushing this bit, or you will scorch the coil.

6. Set the wattage to suit the coil, start low, and climb in small steps.

What's in the Geekvape E100 Box

You get:

• the E100 mod,

• a 2ml UK-compliant Eteno PCTG pod,

• a pre-installed 0.2ohm P coil and a spare 0.4ohm P coil,

• a coil tool,

• a spare parts pack

• and a USB-C cable.

Two things are not in the box: the 18650 battery, which you buy to suit, and the 510 tank adapter, which is a separate accessory if you ever want to run a standard tank.

Made for the Geekvape P Coil System

The E100 is built around the Eteno pod and the P Series coils, and that is the pairing to stick with for simple, plug-and-play vaping. The AS-Chip 3.0 recognises each P coil automatically, so swapping between the 0.2ohm and 0.4ohm needs no menu-diving. What it will not take is another brand's pod, since the Eteno format is Geekvape's own.

If you want to run a sub-ohm tank instead, the separately sold 510 magnetic adapter opens that door. For matched spares, the wider Geekvape Range keeps everything from one maker.

About Geekvape

Geekvape built its name on the Aegis family, and durability runs through all of it. The E100, sold as the Aegis Eteno, brings that rugged tri-proof engineering into a lightweight pod mod, then adds the removable 18650 that a lot of the sealed competition drops.

The Eteno pod is the flavour side of the story, a top-fill, top-airflow design tuned for the P Series coils and suited to direct-lung vaping. If you like a durable mod that pairs neatly with straightforward DTL Tanks, Geekvape is a safe name to back.

Stock Up and Save

A sub-ohm coil is a running cost, not a fixture. The 0.2ohm at full power will want swapping every week or so with daily use, so keeping a couple of P coils and a spare 18650 charged means you are never caught short.

Pirate Vapes dispatches every order the same day before 4 pm, packed to keep the device safe in transit. All stock is TPD compliant, checkout is age-verified, and it is strictly over-18s only. Multi-buy savings apply when you stock up on coils.

Conclusion

The Geekvape E100 is a rugged, refillable pod mod for vapers who want real sub-ohm power and the freedom of a swappable battery. IP68 build, smart coil recognition, a leak-resistant top-fill pod, and two P coils to get started.

Just remember to add an 18650 and a bottle of juice, since neither comes in the box. Keep spare coils topped up, and it will run for years. Browse more Vape Accessories or grab your kit today at Pirate Vapes.

FAQs

Does the E100 come with a battery?

No. It takes a single external 18650, sold separately, so you pick your own cell. That is the main difference from the sealed E100i.

How tough is the E100?

IP68 rated. Water, dust and shock resistant, so spills and drops are far less likely to kill it than a standard mod.

Which E100 coil should I start with?

The pre-installed 0.2ohm at 60 to 70W for warm clouds and strong flavour. Switch to the 0.4ohm at 50 to 60W if you want a slightly tighter draw.

What e-liquid works best with the E100?

Thicker high-VG juice, ideally 70/30 or higher. The sub-ohm P coils are built for it, and thin 50/50 can wick too fast and spit.

How big is the E100 pod?

It ships with a 2ml UK-compliant PCTG pod. The standard non-UK Eteno pod holds 4.5ml.

Can I use a normal tank on the E100?

Yes, with the 510 magnetic adapter, which is sold separately. Fit it, and the E100 will run most standard 510 tanks.