Geekvape Super Mesh X1/X2 Replacement Coils

Geekvape Super Mesh X1/X2 Replacement Coils

Two coils, one job: keeping your Geekvape Cerberus tasting the way it did on day one. The Super Mesh X1/X2 heads are KA1 (Kanthal) mesh coils built for the Cerberus, Aero and Shield Sub-Ohm Tanks, with organic cotton wicking and a mesh element that ramps up fast for clean flavour.

The X1 sits at 0.2ohm for bolder clouds, the X2 at 0.3ohm for a cooler draw and kinder battery use. These are DTL sub-ohm coils for High VG E-Liquids, sold five to a pack from Pirate Vapes. If your Cerberus has gone quiet on flavour, a fresh Super Mesh head brings it straight back.

Why vapers choose the Super Mesh X coils:

• One coil platform covers three of Geekvape's best-known sub-ohm tanks, so a Cerberus owner, an Aero owner, and a Shield owner all reach for the exact same five-pack.

• KA1 mesh heats evenly across a wide surface for quick ramp-up and clean taste.

• Two resistances let you swing between denser clouds and a cooler, longer-lasting draw without touching your tank.

• Organic cotton wicks thick high-VG juice steadily.

• A five-pack is a proper stretch of vaping, usually weeks of daily use before you reach the last one.

Geekvape Super Mesh X1/X2 Features

KA1 Mesh Does the Heavy Lifting

The heating element is a flat sheet of Kanthal A1 mesh rather than a wound wire. A mesh sheet spreads current across a much larger area, so it warms quickly and burns evenly instead of hitting hot spots. The practical upshot is faster ramp-up, cleaner flavour, and a coil that holds its taste well through its lifespan.

Which Resistance Suits You?

Pick the X1 0.2ohm if you want the punchier end: warmer vapour, bigger clouds, more presence on the exhale. Reach for the X2 0.3ohm if you would rather a cooler, tighter draw that sips battery more gently. Both drink the same High VG Shortfills, so you can keep one juice and just swap the head.

Built Around the Cerberus Tank

Geekvape's Cerberus was a runaway sub-ohm favourite, and the Super Mesh X range is the coil line that keeps it running. The X1 in particular is the head Geekvape points Cerberus owners toward for the fullest flavour. The Aero and Shield tanks take the same coils, which is handy if you own more than one.

Prime It, Then Push the Watts

Sub-ohm mesh rewards patience. Wet the coil properly before you fire it, then build up power gradually rather than jumping to the top of the range. Each head lists its wattage band, and staying inside it is the difference between a coil that lasts a fortnight and one that tastes burnt by the weekend. 

Genuine Geekvape, Not a Clone

Coils are one of the most cloned parts in vaping, and a counterfeit mesh head wicks badly and dies fast. These are genuine Geekvape stock, which means the resistance is accurate, the wicking is consistent, and the flavour is what the tank was tuned to deliver. It matters more than people think.

Geekvape Super Mesh X1/X2 Resistance Options

Two heads in the range, and the choice comes down to how much power you want to run and how warm you like the draw.

#buttons

• X1 0.2ohm
• X2 0.3ohm

How to Set Up the Geekvape Super Mesh X1/X2 Coils

Under two minutes, start to finish.

1. Drain and open the tank. Empty any leftover e-liquid, then unscrew the base of your Cerberus, Aero, or Shield from the glass.

2. Take out the spent coil. These are threaded into the base, so grip the old head and unscrew it anticlockwise.

3. Prime the new head. Trickle four or five drops of e-liquid directly onto the exposed cotton at the top and through the side ports, until the wicking looks soaked rather than pale.

4. Screw the fresh coil home. Thread it clockwise into the base until it is finger-tight, then rebuild the tank.

5. Fill, then wait five minutes. Top up with your high-VG liquid and let it stand for a full five minutes so the cotton draws in completely.

6. Prime with the button off, then fire low. Take two or three pulls without pressing fire to draw liquid through, then start a few watts below the coil's range and climb to taste.

What's in the Geekvape Super Mesh X1/X2 Box

Five replacement coils in the single resistance you choose. No tank, no e-liquid, no mod, no glass. These are pure replacement heads for a Geekvape sub-ohm tank you already own. If you do not have one yet, the tank section is the place to start.

The Coil for Geekvape's Cerberus, Aero and Shield Tanks

The Super Mesh X range fits one tank family and fits it well. It drops into the Cerberus sub-ohm tank, the Aero sub-ohm tank, and the Shield sub-ohm tank. That is the intended home for these heads, and it is where they perform as designed. Browse the wider range of Geekvape Coils if you are checking which family your tank uses.

Now the part that saves returns. These do not fit Geekvape's Zeus or Z-series tanks. They do not fit the Aegis Boost pods. And they are not the same as Geekvape's B, P, M, or Z coil lines, each of which serves a different device entirely. Geekvape runs several coil families side by side, so the letter on the coil matters. If your tank came with a Super Mesh X head, the coil screws into the base.

About Geekvape

Geekvape built its reputation on rugged, no-nonsense hardware, and the Super Mesh X line is a good example of that thinking. Rather than reinvent the coil, Geekvape refined a proven KA1 mesh design and matched it to the Cerberus sub-ohm tank, a device that sold in serious numbers on the strength of its flavour and its shockproof build.

The X coil family carries that same priority: clean taste, dense vapour, and a lifespan that justifies the price. It is coil engineering aimed at everyday reliability rather than novelty, which is exactly why the Geekvape Range keeps a loyal following.

Stock Up and Save

Counterfeit coils are everywhere, and they ruin a good tank. Buying genuine Super Mesh heads from Pirate Vapes means the resistance reads true and the wicking behaves, so your Cerberus performs the way it should. A five-pack keeps spares in the drawer for when a coil finally tires out, which always seems to happen mid-session.

Every order is dispatched the same day when placed before 4 pm, packed to arrive safely. All stock is TPD compliant, the checkout is age-verified, and sales are strictly over-18s only.

Conclusion

The Super Mesh X1 and X2 are the straightforward, genuine restock for any Geekvape Cerberus, Aero or Shield tank. Two resistances, KA1 mesh, organic cotton, and a five-pack that lasts.

Go 0.2ohm for warmth and clouds, 0.3ohm for a cooler draw and better battery life, prime each head properly, and you are back to full flavour. Browse more Vape Tanks and Vape Accessories, or head back to Pirate Vapes to finish your order.

FAQs

Which tanks do the Super Mesh X coils fit?

The Geekvape Cerberus, Aero and Shield sub-ohm tanks. They do not fit the Zeus or Z-series tanks, and they are not interchangeable with Geekvape's B, P, M or Z coils.

What is the difference between the X1 and X2?

The X1 is 0.2ohm and runs warmer with bigger clouds around 60 to 70W. The X2 is 0.3ohm, cooler and tighter at roughly 50 to 60W, and easier on your battery.

What e-liquid works best with the Super Mesh X coils?

High VG, 70% VG or above. These are sub-ohm DTL coils, so thin 50/50 liquid wicks too fast and can leak. Thicker juice feeds the mesh properly.

Do the Super Mesh X coils support Temperature Control?

No. The KA1 Kanthal wire is a wattage-mode material. Run these in standard power mode, not TC.

How long does each Super Mesh X coil last?

Usually one to two weeks of daily DTL use. Dark, sweet e-liquids gunk the mesh faster, so dessert flavours shorten the life. Priming properly makes a real difference.

How many Super Mesh X coils come in a pack?

Five coils in a single resistance. Pick either the X1 or the X2 per pack, not a mix.