Gum Mint Al Fakher Hypermax Prime 50K Prefilled Pod Kit

Gum Mint Al Fakher Hypermax Prime 50K Prefilled Pod Kit

A 1000mAh rechargeable cell powers the Gum Mint Al Fakher Hypermax Prime 50K Prefilled Pod Kit, a kit with a puff ceiling of up to 50,000. The kit takes two sealed 10ml containers, each holding 20mg/ml nicotine salt, which click into the sides of a 2ml Snap Dual module carrying the mesh coil.

Gum Mint is flavoured like spearmint chewing gum, with sweet bubblegum set against crisp green mint. The draw runs from restricted direct-to-lung to direct-to-lung, and a Prime 50K refill pack is fitted once the sealed containers run dry, with nothing to top up by hand.

What to Know About the Gum Mint Hypermax Prime 50K Kit

• Up to 50,000 puffs quoted, fewer with long draws
• 20mg/ml nicotine salt in two sealed 10ml containers
• 1000mAh cell recharged over USB-C, cable bought separately
• RDL to DTL draw with a slide-switch airflow control
• Fits Hypermax Prime 50K refills only, not the Hypermax 30K

Features of Gum Mint Al Fakher Hypermax Prime 50K Prefilled Pod Kit

Five features are covered below. A single battery lasts through many refills, which places the kit among Rechargeable Vapes and apart from single-use devices.

Gum Mint Flavour

A nostalgic confectionery profile is recreated here: powdery bubblegum sweetness comes first, and crisp green mint follows like a stick of spearmint gum. Both containers in a kit are filled with the same flavour, so nothing is changed midway. The flavour is also marketed as Hypermax Prime Gum Mint.

Snap Dual Mesh Coil Module

The two 10ml containers click into the sides of the Snap Dual module, whose 2ml centre section holds the mesh coil and draws liquid from both. This split layout keeps the kit within UK container limits, and it is TPD compliant. Nicotine salt is the liquid used, the same type bottled under Nic Salts.

Up to 50,000 Puffs

Up to 50,000 puffs can be drawn from one kit, though only short pulls get close to that ceiling. The liquid is used faster by longer pulls, so totals vary between users. More devices with high ratings are listed under Big Puff Vapes.

1000mAh Battery With USB-C Charging

A 1000mAh battery is fitted in the base and charges over USB-C, where Quick Charge 2.0 is accepted. Battery percentage and pod activation status are shown on a Silk Glow LED screen. Leads for the port can be picked from Chargers And Cables, since none is packed in the box.

Adjustable Airflow and Draw Activation

Airflow is adjusted with a mechanical slide switch on the side of the battery, between a restricted and an open lung draw. The kit is fired by inhaling alone, because no button is fitted. Neither the switch nor the battery is changed by a refill pack, so the chosen setting carries across.

How to Set Up the Gum Mint Hypermax Prime 50K Kit

Assembly takes a few moves, and no e-liquid has to be handled. Containers are fitted to the module first, and the module is then docked in the battery.

Step 1: Peel the protective silicone bungs and seals off the battery, the module, and both containers.

Step 2: Push the two containers into the tracks of the Snap Dual module until each one clicks flush.

Step 3: Dock the loaded module in the battery housing.

Step 4: Rest the kit vertically for 2 to 3 minutes, so that liquid can saturate the mesh coil.

Step 5: Move the airflow switch to the preferred position and draw on the mouthpiece; the USB-C port is used for recharging once the battery percentage runs low.

What's in the Gum Mint Hypermax Prime 50K Kit Box

Four items make up each kit.

• 1 x Hypermax Prime 50K battery (1000mAh, rechargeable)
• 1 x Snap Dual module (coil integrated)
• 2 x 10ml prefilled Gum Mint containers
• 1 x user manual

No charging cable is supplied with the kit, and refill packs are bought separately. Quantities are literal: five kits arrive as Pack Of 5, ten as Pack Of 10.

Gum Mint Hypermax Prime 50K Kit Refill Compatibility

Refills from the Hypermax Prime 50K range are the only ones that fit this battery. A new module and two new containers are carried by every refill pack, so changing flavour needs a different pack and not a different battery. Replacement Pods lists the refills.

Hypermax 30K pods do not fit, because that system has a single-cartridge port and the Prime 50K needs a wider dual-bay chassis. Crown Bar devices are a separate system too, so the Hypermax Prime 50K name should be confirmed on the pack before ordering.

About Al Fakher and the Hypermax Prime System

Al Fakher is best known as a shisha brand, and that background is applied by the Hypermax Prime line to a reusable battery with prefilled, swappable refills. Because the coil sits in the module that the containers are fitted to, the battery is kept across refills.

Gum Mint is one flavour in the kit range, while a much longer list of flavours is offered as separate refill packs. More large-capacity prefilled kits sit in Big Puff Pod Kits.

Stock Up on the Gum Mint Prime 50K Kit

Pairing a multi-kit order with an Al Fakher Gum Mint refill pack covers the first swap in one go. Bundle deals live in Multi-Buy Vapes.

When payment clears before 3:30 pm on a Monday to Friday, the parcel leaves on Tracked 24 that same day; everything else goes out as the next working day begins. Checkout is age-verified and open to over-18s only, with the check completed at Pirate Vapes before anything ships.

Conclusion

Adults after a bubblegum-and-mint prefilled setup with a high puff ceiling and no buttons will find it in this Gum Mint vape kit, in which the battery is kept from one refill to the next.

Matching refill packs from the same range complete the routine. For different styles of hardware, browse Vape Kits; Pirate Vapes is home to the full catalogue.

FAQs

How many puffs does the Gum Mint Al Fakher Hypermax Prime 50K Prefilled Pod Kit give?

A kit can reach up to 50,000 puffs, though short, gentle pulls come closest and heavier use lowers the total.

What nicotine strength is the Hypermax Prime Gum Mint kit?

Each sealed container holds 10ml of salt-based nicotine liquid at 20mg/ml, so the strength sits at the legal limit.

What is included with the Gum Mint Hypermax Prime 50K kit?

A battery, a Snap Dual module with the coil built in, two prefilled 10ml Gum Mint containers, and a user manual are supplied with each kit. Neither a charging cable nor spare refill packs are included, so both are sold separately.

How is the Gum Mint Prime 50K kit charged?

The USB-C port in the base takes the charge, with Quick Charge 2.0 supported. Remaining power is read from the percentage on the Silk Glow screen, and refill packs leave the 1000mAh battery untouched.

Can the Al Fakher 50K Gum Mint kit be refilled once the containers are empty?

Hand refilling is not what the containers are for. Once the liquid is used up, a refill pack from the Hypermax Prime 50K range swaps in a new module and two new containers, and the existing battery carries on.

What is in the Pack Of 5 and Pack Of 10 Gum Mint kits?

The three options differ only in quantity (one, five, or ten full Gum Mint kits), and each kit has its own battery, module, and containers.