Hayati Quokka Replacement Pods

Keeping a Hayati Quokka running is a case of swapping the pod, not chasing coils. These refillable pods carry a stainless steel mesh coil sealed inside, hold 2ml of your own e-liquid, and refill from the side under a silicone plug. Pick your draw from three resistances: 0.6Ω for airy RDL clouds, 0.8Ω for a balanced all-day vape, or 1.2Ω for a tight, cigarette-style MTL.

A clear body lets you watch your level, and each pod lasts about a week. Sold in packs of 3. Pirate Vapes ships them fast with age-verified UK delivery.

Why vapers choose this:

• The mesh coil is built in, so there is no separate coil to buy or fit.

• Three resistances let you set your draw, from tight MTL to airy RDL.

• A clear body so you can see your level and top up before you run dry.

• Side-fill under a silicone plug, quick to fill and slow to leak.

• Genuine Hayati pods, three to a pack, TPD-compliant and MHRA-notified.

Hayati Quokka Replacement Pods Features

Stainless Steel Mesh Coil

Each pod holds a stainless steel mesh coil sealed inside. Mesh heats the e-liquid evenly across a wider surface than old wire coils, which brings out cleaner flavour and steadier vapour and helps the pod last. You never handle the coil; when it fades, you swap the whole pod.

Three Resistances to Match Your Draw

Pick the pod to suit how you vape. The 1.2Ω gives a tight, cigarette-style MTL draw. The 0.8Ω balances flavour and vapour for all-day use. The 0.6Ω loosens into a warmer RDL hit with bigger clouds. Swap between them any time to change the feel.

Clean Side-Fill, Clear Body

Refilling is done from the side under a silicone plug, so there is no unscrewing or spillage. The see-through body lets you check your level at a glance and top up before you run dry. A leak-resistant seal keeps condensation and spitback down between refills.

No Coil Changes

Because the coil is fixed inside the pod, there is nothing to thread, prime by hand, or clean. When the flavour drops off, the swap takes seconds: pull the old pod, click in a fresh one. It is about as low-maintenance as refillable vaping gets.

Built for the Whole Quokka Range

One pod shape covers the lot. Every kit in the Quokka line takes the same pod, so if you own more than one, or upgrade later, your spares still fit. No adapters, no guesswork, just a secure click into place.

Hayati Quokka Replacement Pods Resistance Options

These pods are refillable, so there is no flavour to pick; you fill them yourself. What you choose is the resistance, and each one leans towards a different draw. Not sure where to start? The 0.8Ω is the safe all-rounder.

• 0.8Ω - the balanced, all-day pick, smooth flavour and vapour

• 1.2Ω - tight, cigarette-style MTL, best on nic salts

• 0.6Ω - looser RDL with warmer, bigger clouds, suits freebase

Match the e-liquid to the pod: the 1.2Ω and 0.8Ω are built for nic salts and 50/50 juices, while the 0.6Ω RDL pod also handles higher-VG freebase (around 60 to 70% VG). Pick your flavour and strength from our e-liquid range at Pirate Vapes.

How to Set Up the Hayati Quokka Replacement Pods

1. Pull the used pod out of your Quokka device and dispose of it responsibly.

2. Take a fresh pod, open the side plug, and fill with your e-liquid, taking care not to overfill.

3. Press the plug firmly back in and stand the pod upright for ten to fifteen minutes so the coil soaks.

4. Click the pod into the device until it seats, then vape. Set the device airflow to suit your draw.

What's in the Hayati Quokka Replacement Pods Box

Each pack holds three empty Refillable Pods in the resistance you choose, with the stainless steel mesh coil already sealed inside. There is nothing else to fit, just add your e-liquid. Choose your resistance on the listing before ordering, and grab a bottle of nic salt or 50/50 to fill them.

Compatible Across the Quokka Range

These pods are compatible with the entire Hayati Quokka range, including the Quokka Pro, Quokka Elite, and Quokka Lite. Every kit supports all three resistance options: 0.6Ω, 0.8Ω, and 1.2Ω, so you can choose the draw that suits your vaping style. 

Pair the 0.8Ω and 1.2Ω with nic salts or a 50/50, and the 0.6Ω with a higher-VG freebase. These pods are specific to the Quokka line, so they will not fit Hayati's prefilled kits or other brands. You will find them beside the kits in our Hayati Range.

About Hayati

Hayati became one of the biggest names in UK vaping almost overnight, largely on the strength of its Big-Puff Prefilled Kits like the Pro Ultra Plus. The Quokka line is its move into refillable hardware, aimed at vapers who want that same focus on flavour but with the control and lower running cost of filling their own.

Mesh coil technology runs right through the range, and the products are built for the UK market, arriving TPD-compliant and MHRA-notified. For anyone stepping off disposables onto a refillable setup, it is a familiar, trusted name.

Stock Up and Save

Since a pod lasts about a week, a 3-pack keeps you going for roughly three weeks, and stacking a couple of packs through our Value Bundles drops the price per pod. Every order is checked and packed to arrive intact, then sent tracked so you can follow it to your door, with age-verified checkout and 18+ delivery as standard. The 2ml pods are TPD-compliant and MHRA-notified. Prefer it handled for you? The Crow's Nest sends your chosen resistance on repeat.

Conclusion

If you run any kit in the Quokka range, these are the pods to keep spare. You fill them yourself, so you keep full control over flavour and strength, and the stainless steel mesh coil holds that flavour clean for about a week before a simple swap.

Three resistances cover everything from a tight MTL draw to airy RDL clouds, the side-fill keeps things clean, and one pod shape fits your whole Quokka setup. Just match the e-liquid to your resistance: salts or 50/50 for the tighter pods, freebase for the 0.6Ω. Grab a 3-pack from Pirate Vapes with fast, age-verified UK delivery.

FAQs

Do these pods come with coils?

The stainless steel mesh coil is built into each pod, so there is nothing separate to buy. When it wears out, you replace the whole pod.

Which resistance should I choose?

The 0.8Ω is the balanced all-rounder. Go 1.2Ω for a tighter, cigarette-style MTL draw, or 0.6Ω for a looser RDL vape with bigger clouds.

Which devices do they fit?

Any kit in the Quokka range: the Pro, the Elite and the Lite. They are specific to Quokka and will not fit other kits.

What e-liquid should I use?

It depends on the pod. The 1.2Ω and 0.8Ω are made for nic salts and 50/50 juices. The 0.6Ω RDL pod also takes higher-VG freebase, around 60 to 70% VG.

How long does a pod last?

Around a week on average, though it depends on how much you vape and the e-liquid you use. Sweeter juices wear coils faster.

Are they UK legal?

Each pod is a 2ml TPD capacity, MHRA-notified, and sold to over-18s through an age-verified checkout.