Hohm Tech Work V2 18650 Battery 2547mAh Rechargeable

A 2547mAh 18650 cell pushing 25.3A continuous discharge through a flat-top contact. That puts the Hohm Work V2 firmly in high-drain territory, built for Vape Mods that demand sustained current under load.

QSP Li-NMC chemistry with cobalt oxide, copper, aluminium, and ethylene carbonate, rated to 500 cycles at 69% retention. Dimensions: 18.17mm x 65.04mm, weight 48g, nominal voltage 3.6V. Sold individually. Over 18s only.

Why vapers choose this:

• 25.3A continuous discharge handles sub-ohm builds without voltage sag, holding output steady through the full drain cycle

• 2547mAh capacity sits higher than most high-drain 18650 cells, which typically sacrifice milliamp hours for amperage

• QSP Li-NMC chemistry blends cobalt oxide, copper, aluminium, and ethylene carbonate for both power and longevity

• 500-cycle retention at 69% keeps the cell performing after months of daily rotation

• UN38.3 and IEC62133 certified through accredited laboratories

Hohm Tech Hohm Work V2 Features

25.3A That Actually Holds Up

Plenty of 18650 cells claim high amperage but fold under sustained load. The Hohm Work V2 is tested under Hohm Tech's pulse protocol: 5 seconds on, 30 seconds off, with strict limits on density loss, thermal distribution, and voltage drop. The 25.3A CDR is a sustained, repeatable discharge rate, not a burst figure.

Why 2547mAh Matters at This Amperage

High-drain cells usually trade capacity for current. The Hohm Work V2 holds 2547mAh while still pushing 25.3A continuous. If your mod runs at 60 to 80W regularly, that extra capacity means fewer mid-day battery swaps.

Fast Charging, If Your Charger Can Keep Up

3.82A maximum charge rate. Most vapers charge at 1A, but if your Battery Charger supports higher amperage, the Hohm Work V2 handles it. Fair enough, not every charger pushes 3.82A, but even at 2A you are charging faster than with standard cells.

Built for Regulated Mods

The flat top contact fits standard 18650 Box Mods and regulated devices. The cell is unprotected, so it relies on your device's chipset for voltage cutoffs and short-circuit protection. Stick with regulated mods unless you have the knowledge to verify your build safety.

Certification Beyond a Sticker

UN38.3, EN62133, IEC62133, and UL1642. Hohm Tech runs all four through accredited labs and publishes pulse protocol parameters openly. Not many battery brands offer that level of data transparency.

How to Set Up the Hohm Tech Hohm Work V2

1. Inspect the wrapper before every use. Any tear, nick, or dent means the cell should not go into a device.

2. Charge fully using a compatible 18650 charger. Do not exceed 4.2V. Remove the cell once charging completes.

3. Insert the positive end first into your mod's battery bay, matching the polarity markings. The flat top sits against the positive contact.

4. Let the chipset read the cell for a few seconds before firing.

5. Monitor temperature during early sessions. If the cell feels excessively warm, stop using it and inspect.

What's in the Hohm Tech Hohm Work V2 Box

One Hohm Work V2 18650 rechargeable battery cell, sold individually. No charger, no case, no mod included. Hohm Tech recommends using a protective battery case for transport and storage. Never carry a loose 18650 cell in a pocket or bag.

The High-Drain 18650 for Serious Mod Users

The Hohm Work V2 fits any device that accepts a standard 18650 flat top cell: single-battery regulated mods, dual-battery Advanced Mods, and mechanical setups for experienced builders.

For dual-battery devices, always use a matched pair with the same charge cycle count. Does not fit devices requiring button-top 18650 cells, 20700, or 21700 form factors.

About Hohm Tech

Hohm Tech International publishes full pulse protocol testing data for every cell it releases. The Hohm Work V2 sits alongside the Hohm Life4, Hohm Run, and Hohm Grown across 18650, 20700, 21700, and 26650 form factors.

Every cell carries UN38.3, EN62133, IEC62133, and UL1642 certification. The brand is known for pushing capacity and amperage simultaneously rather than sacrificing one for the other.

Stock Up and Save

Batteries degrade. After six to twelve months of regular use, you will notice shorter sessions as cycle retention drops. Keeping a spare in rotation means you always have a fully charged cell ready while the other charges.

Every order from Pirate Vapes ships same day before 4 pm in protective packaging. Age-verified checkout, over 18s only. Spend over £25 and delivery is free with Free Pirate Post.

Conclusion

The Hohm Work V2 is a serious 18650 cell for vapers who want both capacity and current from one battery. 2547mAh at 25.3A continuous puts it ahead of most in its class.

If your mod takes an 18650 and you push it past 50W regularly, the Hohm Work V2 earns its place. Browse Vape Accessories and pick one up at Pirate Vapes.

FAQs

Is the Hohm Work V2 a flat top or button top?

Flat top. It fits standard 18650 mods with flat top contacts. Not compatible with devices that specifically require button top cells.

How long does the battery last on a full charge?

Depends entirely on your wattage. At 40 to 60W, most vapers get a full day from the 2547mAh capacity. At 80W and above, expect to swap or recharge by mid-afternoon.

Can I use two Hohm Work V2 cells in a dual-battery mod?

Yes, but use a matched pair. Same brand, same model, same number of charge cycles. Mismatched cells cause uneven discharge and reduce the lifespan of both batteries.

What charger works with this battery?

Any quality 18650 charger that charges to 4.2V and supports at least 1A output. The cell handles up to 3.82A charging if your charger supports it.

How often should I replace the battery?

Hohm Tech rates it at 500 cycles with 69% retention. In practice, replace when you notice a clear drop in performance or within twelve months of regular use, whichever comes first.