iJoy Shogun Univ Kit

iJoy Shogun Univ Kit

A resin box mod that still runs on two 18650 cells. The iJoy Shogun Univ Kit pairs that mod with the Katana Sub-Ohm Tank for direct-to-lung vaping. Output tops out at 180W.

The UNIV chipset drives it, with Power, POD, and temperature-control modes. A small 0.96-inch screen shows the settings. Two mesh coils sit in the box, one fitted and one spare. The mod uses a standard 510 connection, so it is not tied to the Katana.

You supply the cells and e-liquid yourself. Browse it in our Vape Kits.

Why vapers choose this:

• Dual 18650 power up to 180W gives the Shogun Univ real headroom for the 0.15ohm mesh coils; with removable cells, you can swap for a charged pair.

• A resin and zinc-alloy body gives each unit its own finish and a solid feel in the hand.

• Two mesh coils are included, both at 0.15ohm, so you have a fitted head and a spare from the start.

• A standard 510 connection means the mod will run other 510 tanks, not just the Katana.

• Temperature control modes cover nickel, titanium, and stainless steel wire alongside straight wattage.

iJoy Shogun Univ Features

180W UNIV Chipset

The UNIV chipset is the core of the Shogun Univ mod. It fires from 5W to 180W and supports a resistance range down to 0.05ohm, so it drives low-resistance mesh coils without strain. Alongside straight Power mode, it carries POD, PMODE, and full temperature control for nickel, titanium, and stainless steel. Pair it with a High-VG E-Liquid for the sub-ohm coils.

Katana Sub-Ohm Tank

The included Katana Sub-Ohm Tank measures 28mm and sits flush on the mod without overhang. It uses a sliding top-fill cap and bottom airflow with triple adjustable slots, one of the more open draws among DTL Tanks. Stainless steel and Pyrex-reinforced glass make up the build. The tank ships with two glass tubes so you can pick your capacity.

KM and DM Mesh Coils

Two coils come in the box, both at 0.15ohm and both rated 40 to 80W. The KM1 ships pre-installed, and the DM-M2 is included as a spare. Mesh heads heat evenly across a larger surface, which helps flavour and cuts down on early dry hits. The wider Katana coil range, including the DM-M3, drops in from the Vape Coils collection.

Dual 18650 Battery Power

The Shogun Univ runs on two external 18650 cells, sold separately. Removable batteries let you carry a charged spare pair rather than waiting on a cable, which suits heavier all-day use at higher wattage. The 0.96-inch screen shows wattage, resistance, mode, and battery status so you can keep an eye on both cells.

Resin and Zinc-Alloy Build

The chassis combines zinc alloy with resin panels, so the mod feels solid and each finish carries its own marbled pattern. At 88mm tall and 55mm wide, it is a chunky dual-battery device rather than a pocket-sized one. The resin extends to the drip tip and tank sleeve on matching finishes.

iJoy Shogun Univ Colours

Six resin finishes are available. The pattern varies slightly from unit to unit, so each one is a little different.

#buttons

• Aurora Blue
• Galactic Hurricane
• Ghostfire
• Hellfire
• Specter Green
• Splendor

How to Set Up the iJoy Shogun Univ Kit

Around five minutes start to finish, most of it letting the coil soak.

1. Fit two 18650 batteries. Open the base door and insert a matched pair, checking the plus and minus markings inside the bay. Use two identical, high-drain cells from the same brand and never mix ages or charge levels. Browse compatible Vape Batteries if you need a set.

2. Fit the coil. Screw the KM1 or DM-M2 coil into the Katana tank base until it seats. Finger-tight is enough.

3. Prime the coil. Drip a few drops of e-liquid onto the exposed cotton ports so the wick does not start out dry.

4. Fill the tank. Slide the top cap open, add a high-VG e-liquid through the fill port, then close the cap.

5. Let the coil drink. Stand the tank upright for a good five minutes, closer to ten near the top of the coil's range. Firing on dry cotton burns the mesh straight away.

6. Set your wattage. Attach the tank to the 510, power on, and start near the bottom of the coil's range on the screen before raising it to taste.

What's in the iJoy Shogun Univ Box

Inside you get:

• The iJoy Shogun Univ mod

• The Katana Sub-Ohm Tank

• The KM1 0.15ohm coil, pre-installed

• The DM-M2 0.15ohm coil, as a spare

• A replacement glass tube

• A spare parts pack

• A Micro-USB cable

• A user manual and warranty card

There are no batteries and no e-liquid included, so add both before you order. Keep a set of Replacement Tank Glass to hand, since sub-ohm glass takes the odd knock.

Runs the Katana Coil Range

The Katana Sub-Ohm Tank on this kit takes iJoy's KM and DM mesh coil family, so beyond the two supplied, you can drop in other Katana heads such as the DM-M3. The mod itself uses a standard 510 connection, so it will also run other 510 tanks if you change setup later.

What will not fit: coils from other brands, or heads built for a different iJoy tank series. If a coil is not a Katana KM or DM head, it is the wrong platform for this tank. The Shogun Univ sits among our Advanced Mods at Pirate Vapes for exactly that flexibility.

About iJoy

iJoy built its name on high-wattage box mods and sub-ohm tanks, often wrapped in resin panels that give each unit its own look. The Shogun Univ carries that style, matching the resin chassis to the Katana Sub-Ohm Tank for a coordinated kit.

The UNIV chipset covers straight wattage, POD mode, and temperature control, so it suits vapers who want to tune their vape rather than leave it on one setting. It is an advanced, external-battery device rather than a simple pod system.

Stock Up and Save

This kit needs two things it does not ship with: a matched pair of 18650 cells and a way to keep them charged. Sorting both on the same order means the Shogun Univ is ready to vape when it lands, and spare Katana coils save a repeat trip.

Every order from Pirate Vapes goes out same-day before 4 pm on working days, with an age-verified checkout and over-18s only.

Conclusion

The iJoy Shogun Univ kit is a resin-clad, dual-18650 box mod matched to the Katana Sub-Ohm Tank, aimed at direct-to-lung vaping at up to 180W.

Two mesh coils, temperature control and a standard 510 connection give it flexibility, as long as you are comfortable running external batteries. Explore more Vape Accessories and browse the full lineup at Pirate Vapes.

FAQs

Does the iJoy Shogun Univ kit come with batteries?

The Shogun Univ does not include batteries. It needs two 18650 cells, sold separately, so use a matched high-drain pair from the same brand and charge them with a dedicated external charger where possible.

What coils does the iJoy Shogun Univ use?

The kit uses iJoy Katana KM and DM mesh coils. It includes a KM1 at 0.15ohm and a DM-M2 at 0.15ohm, both rated 40 to 80W, and the DM-M3 also fits the Katana tank.

What wattage should I run the Shogun Univ at?

Both supplied coils are rated 40 to 80W. Start near the lower end once the coil is primed, take a few draws, then raise the wattage until the flavour and warmth sit where you want them.

Can the iJoy Shogun Univ run other tanks?

The Shogun Univ uses a standard 510 connection, so most 510 tanks will fit. The 28mm Katana sits flush, and tanks up to around that width will look right on the mod.

Does the Shogun Univ have temperature control?

The Shogun Univ supports temperature control for nickel, titanium, and stainless steel wire, alongside standard Power mode, POD mode, and PMODE, all set from the 0.96-inch screen.

How do I fill the Katana tank on the Shogun Univ?

Slide the top cap open, tip your high-VG e-liquid into the fill port, and close the cap. Let a fresh coil stand for several minutes before the first draw so the wick soaks fully.