Innokin Endura T18ii Mini Vape Kit

Innokin Endura T18ii Mini Vape Kit

About the width of a marker pen and simple enough to run one-handed. The Innokin Endura T18ii Mini vape kit pairs a 1000mAh battery with the 2ml Prism T18ii tank for straightforward MTL vaping. One button cycles three set power levels, 10.5W, 12W and 13.5W, while a four-hole airflow ring tunes the draw from tight to airier.

It runs the 1.5ohm T18E coil on nic salts or 50/50 liquid, and charges over Micro USB. Pirate Vapes stocks it across the MTL Vape Kits and 50/50 E-Liquids range.

Why vapers choose this kit:

• One button controls everything, letting you turn the device on, switch between Low, Medium and High power, and lock it when you're done.

• A genuine 2ml top-fill tank with a twist-off cap.

• The award-winning T18E Prism coil gives clean MTL flavour.

• Four-hole airflow for a tight or airier draw.

• A stainless steel body that shrugs off daily knocks.

Innokin Endura T18ii Mini Features

Three Adjustable Power Levels

The single button does everything. Click to fire, click three times to lock it off when it goes in a pocket, and use it to change your power. (To change power, turn the device off, then press and hold the button. The LED lights will cycle between 10.5W, 12W, and 13.5W. Release the button on your preferred level.) There is no screen and nothing to configure. For anyone who wants to vape without managing a device, that simplicity is the whole appeal.

Adjustable Airflow

Your call, set at the base. The four-hole airflow ring closes down for a snug, cigarette-style MTL pull or opens for a softer, airier draw. It is a small adjustment, but it changes the feel completely, and honestly, it is worth a minute of playing with it to find your spot.

1.5Ω Prism Coil

The kit runs the 1.5ohm T18E coil, a Kanthal MTL head with organic cotton wicking that Innokin has refined over several generations. It handles nic salts and 50/50 liquid cleanly, and spares are easy to find among our Vape Coils when the flavour starts to fade.

Easy Top-Fill Design

Refilling is a twist-off job. Pop the top cap, add your liquid to the fill port around the central tube, and close it back up. There is no unscrewing the whole tank or turning it upside down, which keeps the process clean and quick between sessions.

Stainless Steel Body and Magnetic Cap

The chassis is stainless steel rather than plastic, so it holds up to being carried around all day. A magnetic cap clips over the mouthpiece to keep it clean when the kit is in a bag, and pairs neatly with Nic Salts at 10mg or 20mg for a smooth, tight hit.

Innokin Endura T18ii Mini Colours

Eleven finishes, all on the same slim stainless body. The choice is down to taste.

#buttons

• Black
• Blue
• Cyan
• Green
• Grey
• Navy Blue
• Pink
• Purple
• Rainbow
• Red
• Silver

How to Set Up the T18ii Mini

A couple of minutes, with the soak doing most of the work.

1. Charge the device over Micro USB until the LED shows a full charge.

2. To install a coil, unscrew the bottom metal collar of the tank. Drop the fresh 1.5ohm T18E coil directly into the tank. (Ensure the flat edges on the base of the coil align with the flat edges on the tank so it sits flush). Screw the bottom collar back on securely.

3. Twist off the top cap and fill the tank with 50/50 or nic salt liquid, pouring it down the sides and keeping clear of the central airflow tube, then close it firmly.

4. Stand the kit upright and leave it for a full five to ten minutes so the internal cotton draws liquid all the way through. Firing a dry coil will instantly ruin it.

5. To set your power level, ensure the device is off, then press and hold the fire button. The LEDs will cycle. Release the button when your preferred level is lit.

6. Click the button 3 times to turn the device on, adjust the airflow ring, and inhale while holding the button.

What's in the Innokin Endura T18ii Mini Vape Kit Box

• One Endura T18ii Mini battery,

• One Prism T18ii tank,

• two 1.5ohm T18E coils,

• a magnetic cap,

• a spare mouthpiece,

• an O-ring set,

• a Micro USB charging cable

• and a user manual.

There is no e-liquid included, so add a bottle of nic salt or 50/50 to get started.

Coils and Spares for the T18ii Mini

The Prism T18ii tank runs exclusively on Innokin T18E Coils (the European version), and the kit gives you two 1.5ohm heads to start.

Important Note: Do not buy standard "T18" coils, as they are built for international 3ml tanks and are physically too tall to fit this TPD-compliant 2ml tank.

Browse the wider Innokin vape range to restock your T18E coils. The tank itself uses a standard 510 thread, so it can physically sit on other batteries if needed.

About Innokin

Innokin has been building beginner-friendly MTL hardware for well over a decade, and the Endura T18 line is one of its best-known. The T18 Prism coil picked up industry awards for flavour, and the platform earned a reputation as a reliable, no-drama starting point for tank vaping.

The Mini keeps that formula and shrinks it: the same coil, the same simple single-button control, in a lighter and more pocketable shell. It is a considered, tidy piece of kit rather than a flashy one.

Stock Up and Save

If this is your first refillable tank kit, everything you need to start is in the box bar the liquid. Add a bottle of nic salt and a spare pack of T18E coils, and you are set for weeks.

Pirate Vapes ships every order the same day when it is placed before 4 pm. All stock is TPD compliant, checkout is age-verified, and sales are strictly over-18s only. Free Pirate Post applies on orders over £40.

Conclusion

The Endura T18ii Mini is one of the simplest tank kits going, and that is its strength. A 1000mAh battery, a 2ml top-fill tank, three power levels and a proven MTL coil make it an easy, reliable pocket vape with no learning curve.

Pair it with a 50/50 liquid or a nic salt, and it just works. Browse more Vape Accessories or head back to Pirate Vapes to finish your order.

FAQs

Is the T18ii Mini good for beginners?

Yes. One button, three power levels, and no screen make it about as simple as a refillable kit gets, which is why it stays popular with newer vapers.

What coils does the Endura T18ii Mini Vape Kit take?

It takes the Innokin T18E coil series (the 'E' stands for Europe/TPD). The kit includes two 1.5ohm T18E coils. It will not fit standard "T18" coils, as those are too long for this 2ml tank.

Can I use nic salts with the Endura T18ii Mini Vape Kit?

Yes, and they suit it well. 50/50 nic salts at 10mg or 20mg give a smooth, tight MTL draw through the 1.5ohm coil.

How does the Endura T18ii Mini Vape Kit charge?

Over Micro USB, using the cable in the box. A full charge covers a day of light to moderate use on the 1000mAh battery.

What e-liquid should I use with the Endura T18ii Mini Vape Kit?

50/50 or higher-PG liquid. Thick high-VG blends will not wick through this MTL coil properly and can cause dry hits.

How long does an Endura T18ii Mini Vape Kit coil last?

Usually one to two weeks with moderate use. Sweeter liquids gunk up the cotton faster, so the flavour will tell you when to swap it.