Innokin Sceptre Pod Kit

Innokin Sceptre Pod Kit

Want a tight mouth-to-lung draw one day and looser, cloudier hits the next, without carrying two devices? That is the whole pitch of the Innokin Sceptre pod kit. It ships with two coils, a 0.5ohm RDL mesh head and a 1.2ohm MTL head, and the device reads whichever one you fit and sets the power for you.

A 1400mAh battery, a refillable 2ml pod, and a Boost mode for when you want more heat sit inside a pocket-sized zinc-alloy body. As a Refillable Pod Kit from Pirate Vapes, it is one of the more flexible starter setups going.

Why vapers choose the Sceptre:

• Two coils in the box cover two entirely different vaping styles, so one kit handles a discreet MTL draw with nic salts and a warmer, more open RDL draw with lower-strength juice.

• Automatic coil detection sets the wattage the moment you fit a head, so there is nothing to configure.

• A refillable pod and replaceable coil keep the running cost and the waste far below single-use bars.

• 1400mAh sees most vapers through a full day.

• Boost mode adds heat and vapour on demand, without a menu.

Innokin Sceptre Pod Kit Features

Two Coils, Two Completely Different Vapes

The kit lands with both heads. The 1.2ohm MTL coil gives a tight, cigarette-style draw that pushes flavour forward, best with the airflow closed down and a nic salt in the tank. The 0.5ohm RDL mesh coil opens things up: warmer, cloudier, softer on the throat, and happier with lower-strength juice. Two vapes, one device, no compromise.

What Does Intelligent Coil Detection Actually Do?

It removes the guesswork. Fit a coil, and the Sceptre recognises its resistance and dials the wattage to a sensible level for it, so you are not left scrolling through settings or scorching a fresh head. The 1.2ohm runs gently at around 9 to 10W. The 0.5ohm steps up to roughly 18 to 20W. You just vape.

A Refillable Pod, Not a Throwaway

The 2ml pod fills from the side through a simple port, and it is transparent with a light beneath it so you can see your juice level at a glance. Refill it, swap the coil when the flavour fades, and the same pod keeps going. Pair it with your choice of Nic Salts for the MTL coil, and you have a tidy, low-waste everyday setup.

Flip to Boost When You Want More

Two power profiles, one button. Normal mode shows a green LED and keeps things smooth and economical. Hold the button with the device off, and it cycles to Boost mode, a purple LED, which pushes extra heat and vapour through the coil. It is a small touch, but on the RDL coil especially, the difference is easy to feel.

Small Enough to Forget It Is There

At roughly 107mm tall in a zinc-alloy shell, the Sceptre disappears into a pocket. It fires on a draw automatically or on the button if you prefer, and the side LED doubles as a battery gauge. It suits MTL Kits buyers who want something durable and simple rather than a screen full of settings.

Innokin Sceptre Pod Kit Colours

Five finishes, all sharing the same honeycomb-accented front and transparent pod. Pick on looks, since every colour is the same device inside.

#buttons

• Black
• Blue
• Grey
• Pink
• White

How to Set Up the Innokin Sceptre Pod Kit

Quick to get going from cold.

1. Charge it first. Connect the microUSB cable and let the battery fill until the LED settles. A full charge before the first vape keeps the flavour consistent.

2. Choose and fit your coil. Twist the base of the pod open, then press either the 1.2ohm MTL or 0.5ohm RDL coil firmly into the pod until it seats.

3. Drip to prime. Put two or three drops of e-liquid straight onto the exposed cotton of the coil before you close the pod. This is the step most people skip.

4. Fill the pod. Open the side port and add your e-liquid, keeping clear of the central airflow tube, then close it firmly.

5. Let it rest for three to four minutes. Refit the pod and leave it standing so the wick draws liquid all the way through.

6. Set the airflow and vape. Slide the airflow closed for MTL or open for RDL, then draw to fire, or press the button. Switch to Boost if you want more.

What's in the Innokin Sceptre Pod Kit Box

• One Sceptre device with its 1400mAh battery,

• one refillable pod,

• a 0.5ohm RDL coil,

• a 1.2ohm MTL coil,

• a microUSB charging cable,

• and the usual manual and safety leaflet.

No e-liquid is included, so add a bottle to suit whichever coil you plan to start on.

Coils and Pods for the Innokin Sceptre

The Sceptre runs on Innokin's own Sceptre coil range, and both the 0.5ohm RDL and 1.2ohm MTL heads come in the box. When the flavour drops off, a fresh coil brings it straight back, and spare pods are available if yours ever wears out. Handy to know: the same Sceptre coils are shared with the Innokin Sensis, so if you own one of those, your spares carry across. Keep a few Replacement Pods and coils on hand, and the kit runs for a long time.

What it does not use is another brand's pods or coils. This is a closed pod platform built around Innokin's own parts, so stick to genuine Sceptre coils and pods for the performance the device was tuned to give.

About Innokin

Innokin has spent years building a name in mouth-to-lung hardware, from the Endura and Zenith tanks to the Sensis and Sceptre pod systems. The Sceptre sits in that tradition: flavour-first, beginner-friendly, and built to last rather than dazzle.

The automatic coil detection and the dual MTL and RDL setup are classic Innokin thinking, giving newer vapers a device that just works while leaving room to experiment with draw style. Even the packaging leans practical, printed on recyclable card. Browse the wider Innokin Range for tanks, pods and spares.

Stock Up and Save

Because the Sceptre is refillable, the only ongoing outlay is coils and juice, which is where a bit of forward planning pays off. Grab a few spare Sceptre coils and a bottle of nic salts alongside the kit, and you are set for weeks.

Every order from Pirate Vapes is dispatched the same day when placed before 4 pm and packed to arrive safely. All stock is TPD compliant, the checkout is age-verified, and sales are strictly over-18s only. Free Pirate Post lands on orders over £40.

Conclusion

The Innokin Sceptre is a sensible, flexible pod kit for anyone who wants both an MTL and an RDL vape from one small, refillable device. Two coils supplied, automatic power setting, a 1400mAh battery, and a refillable pod that keeps the running cost sensible.

Fit the 1.2ohm for a tight nic-salt draw or the 0.5ohm for warmer clouds, prime it properly, and it does the rest. Browse more Vape Kits and Vape Accessories, or head back to Pirate Vapes to finish your order.

FAQs

Is the Sceptre good for beginners?

Yes. It fires on a draw, sets its own wattage, and comes with both coils, so there is very little to learn. Fit a coil, fill the pod, prime it, and vape.

What is the difference between the two Sceptre coils?

The 1.2ohm is for MTL: a tight, cigarette-like draw best with nic salts. The 0.5ohm is for RDL: warmer, cloudier, and better with lower-strength or higher-VG juice.

How big is the Sceptre pod?

2ml, in line with UK TPD rules. It is refillable through a side port, so you top it up rather than replacing it each time.

How do I charge the Sceptre?

Through the microUSB port at 5V/1A. The side LED shows the battery level so you know when to plug in.

What nicotine strength should I use in the Sceptre?

For the 1.2ohm MTL coil, 10mg or 20mg nic salts suit most. For the 0.5ohm RDL coil, drop to 3mg to 6mg freebase or a 50/50 to keep the draw smooth.

Can I change the Sceptre’s vaping style without buying anything else?

Yes, both coils are in the box. Swap the coil, adjust the side airflow, and you move between MTL and RDL on the same device.