KangerTech CLOCC Replacement Coils

KangerTech CLOCC Replacement Coils

KangerTech CLOCC Coils are replacement heads for the Kanger CLTANK, a 2ml top-fill tank, and are supplied in packs of 5 with organic cotton wicking. Three resistances are offered: 0.15ohm nickel, 0.5ohm stainless steel and 1.5ohm nichrome. Packaging is colour-coded by resistance, so each head is easy to identify when several packs are kept together.

A direct-to-lung draw is given by the 0.15ohm and 0.5ohm heads, and a mouth-to-lung draw by the 1.5ohm head. The 0.5ohm coil is rated by Kanger for 15W to 60W. Temperature control mode is required by the nickel 0.15ohm coil.

What to Know About the CLOCC Coils

• 5 coils in every pack, colour-coded by resistance
• 0.15ohm Ni200, 0.5ohm SS316L or 1.5ohm nichrome
• 0.5ohm coil rated for 15W to 60W
• Direct-to-lung on 0.15ohm and 0.5ohm, mouth-to-lung on 1.5ohm
• Fits the Kanger CLTANK only

Features of KangerTech CLOCC Coils

The CLOCC head pairs a metal coil with a cotton wick, and each of the three versions suits a different style of vaping. Other tank and brand options are gathered in the Vape Coils range.

Organic Cotton Wicking

CLOCC stands for CLTANK Organic Cotton Coils, and the name describes the wick. E-liquid is carried to the wire by the cotton, which keeps flavour consistent while the head is fresh. Organic cotton is used in all three versions, so the wicking is not changed by the resistance chosen.

Three Resistances

Resistance decides the style of draw. The 0.15ohm and 0.5ohm heads are sub-ohm coils made for direct-to-lung vaping, while the 1.5ohm head gives a tighter mouth-to-lung pull. One pack holds 5 coils of a single resistance, so the choice is made before the pack goes in the basket.

Ni200 Temperature Control

Ni200 nickel wire is used in the 0.15ohm head. Nickel is read by a temperature control mode, so a device that offers one is needed. A power-only device cannot run this head as intended, and the 0.5ohm or 1.5ohm heads are the alternatives for those setups.

SS316L Stainless Steel

SS316L stainless steel wire is used in the 0.5ohm head. It is rated by Kanger for 15W to 60W, and it can be run in variable wattage mode or in stainless steel temperature control. It sits between the other two resistances and suits a standard direct-to-lung setup.

Colour-Coded Packaging

Packaging colour is changed with each resistance, so a 0.15ohm pack is not mixed up with a 0.5ohm or 1.5ohm one. 5 coil heads are contained in each pack. Spare packs of the same resistance can be kept together and swapped in as heads wear out.

CLOCC Coil Options for Each Resistance

A different device and draw style are suited by each resistance. The notes below cover what is known for each one, and the Vaping Guides page explains wattage and draw styles in more detail.

• 0.15ohm Ni200: a direct-to-lung head that works in temperature control mode only. Thicker liquid such as High VG E-Liquid is normally paired with sub-ohm coils.
• 0.5ohm SS316L: a direct-to-lung head rated for 15W to 60W. Wattage is started at the low end and raised in small steps, which suits CLOCC 0.5ohm coils in a first fit.
• 1.5ohm Nichrome: a mouth-to-lung head. A thinner liquid such as 50/50 E-Liquid is suited to the tighter draw of CLOCC 1.5ohm coils.

#buttons

• 0.5ohm SS316L
• 0.15ohm Ni200
• 1.5ohm Nichrome

How to Fit the CLOCC Coils

Fitting takes a few minutes. The steps below apply to all three resistances, and the coil is left to soak before it is used.

Step 1: Remove the CLTANK from the battery or mod and pour out any e-liquid left inside.

Step 2: Take the old coil head out of the tank base.

Step 3: Fit the new CLOCC head into the base and check that it is seated firmly.

Step 4: Add a little e-liquid to the exposed cotton so the wick is wet before first use.

Step 5: Top up the tank through its filling port and leave it upright for a short wait, so that the cotton can take in the liquid.

Step 6: Reattach the tank. A 0.5ohm head is started at the low end of its 15W to 60W range, and a 0.15ohm head needs the device set to nickel temperature control.

What's in the CLOCC Coils Pack

Each pack holds the coil heads only, all of the same resistance.

• 5 CLOCC coil heads with organic cotton wicking

The tank, battery or mod and e-liquid are not included.

Devices Compatible With the CLOCC Coils

CLOCC heads are made for the Kanger CLTANK, and they are listed by Kanger for CLTANK models only. Other Kanger tanks with their own heads will not accept them. Anyone shopping for Kanger CLTANK coils should match the head to the tank first.

A device with a temperature control setting is also needed for the nickel 0.15ohm head. A resistance is then chosen to suit the device, and tanks are gathered in the Vape Tanks range.

About Kanger and the CLOCC Coils

The CLOCC head was designed by Kanger around its CLTANK, a 2ml glass and stainless steel tank with a child lock mechanism, which is where the CL in the name comes from.

A top-fill port and an adjustable airflow valve at the top are found on the tank, and the coil head is shaped for that layout. Because the head is specific to the CLTANK, it is sold as a consumable part for that tank rather than a universal coil. Kanger CLOCC heads are the only ones that fit it.

Stock Up on CLOCC Coils

A spare pack of the same resistance keeps a CLTANK running when a head wears out, and a second resistance covers a change of draw style.

Free Pirate Post is applied to orders over £40, and savings on larger baskets are found in the Multi-Buy Vapes range. Checkout at Pirate Vapes is age-verified, with sales to over-18s only.

Conclusion

The KangerTech CLOCC coil range suits CLTANK owners who want a like-for-like head or a different draw style from the same tank.

The resistance is best matched to the device, with a spare pack kept close by. More parts and kits are listed at Pirate Vapes. Sales are restricted to over-18s.

FAQs

Which tank do the KangerTech CLOCC Coils fit?

The KangerTech CLOCC Coils are made for the Kanger CLTANK. They are listed by Kanger for CLTANK models only, so other tanks should not be paired with them.

What is the difference between the three CLOCC resistances?

A direct-to-lung draw is given by the 0.15ohm Ni200 and 0.5ohm SS316L heads, while a mouth-to-lung draw is given by the 1.5ohm nichrome head. Temperature control is also needed by the nickel head.

Can the CLOCC 0.15ohm nickel coils run in normal power mode?

Ni200 nickel wire is used in the 0.15ohm head, and it is meant for temperature control devices only. A device without that mode is better paired with the 0.5ohm or 1.5ohm heads.

What wattage suits the CLOCC 0.5ohm coils?

The 0.5ohm SS316L head is rated by Kanger for 15W to 60W. Wattage is best started near the bottom of that range and raised gradually, since the first draws are then kept clean.

How many coils are in a pack of KangerTech CLOCC Coils?

Each pack holds 5 coil heads of a single resistance. Packaging colour is changed with the resistance, which makes the three versions easy to tell apart.

Are the CLOCC 1.5ohm coils suitable for a mouth-to-lung draw?

The 1.5ohm nichrome head is listed by Kanger as the mouth-to-lung option in the CLOCC range. The 0.15ohm and 0.5ohm heads are the direct-to-lung versions.