Kangertech Slibox Replacement Pods

When the flavour on your Slibox starts to dull, this is the fix. The Kangertech Slibox Replacement Pods come two to a pack, each holding 2ml with a 0.8ohm mesh coil sealed inside. There is no coil to fit and nothing to rebuild.

Fill from the side through the silicone stopper, click the pod onto its magnetic base, and you are back to a clean mouth-to-lung draw. The clear PCTG shell lets you keep an eye on your liquid level. Built only for the Slibox pod kit, and happiest with 50/50 or nic salt juice. Grab your Replacement Pods and keep a spare in the drawer.

Why vapers choose this:

• Coil sealed inside the pod means no fitting, no priming a bare coil, and no guesswork. When it is spent, you fit a fresh one and carry on, which is exactly the sort of low-effort upkeep the Slibox was built around.

• 0.8ohm mesh for a warm, flavour-led MTL draw.

• Clear PCTG shell so you can see when a refill is due.

• Magnetic fit. Line it up, push, go.

• A two-pack keeps a spare on hand, which you will want, since integrated-coil pods are a consumable.

Kangertech Slibox Replacement Pods Features

The Coil Comes Built In

There is no coil to install because it is sealed into the pod. That keeps the whole thing simple: fill, click, vape. When the taste starts to fade or you get the first hint of a burnt note, you drop in a new pod rather than stripping anything down. It is maintenance for people who would rather not think about maintenance.

Why 0.8ohm For MTL?

Because it lands in a nice spot. The 0.8ohm mesh runs warm enough for good vapour but keeps the draw tight, so you get a mouth-to-lung pull that sits close to a cigarette. It suits stronger nic salts well, so pair it with the Nic Salt E-Liquids if you are after a firmer throat hit.

Mesh, And What It Does For Flavour

Mesh heats across a wider surface than old round wire, which means quicker, more even warming and cleaner flavour from each puff. On a small pod like this, that is the difference between a flat vape and one that actually tastes of your juice. It also tends to hold that flavour steadier through the pod's life.

Fill From The Side, Watch The Level

Pull out the silicone stopper on the side, tip your juice in, and push the stopper back. Quick and clean, no lifting the pod off the device. The transparent body means you can see the liquid drop as you go, so you top up before it runs dry rather than after.

Two In A Pack For A Reason

Integrated-coil pods do not last forever, and that is by design. A two-pack means one in the device and one waiting, so a fading pod is never a problem. Fit the spare, order more, done.

Kangertech Slibox Replacement Pods Resistance

One resistance here, and it is a well-judged one. The 0.8ohm mesh coil is tuned for MTL vaping: warm, flavourful, and tight on the draw. It works with 50/50, high-PG blends, and nic salts, so most pod-friendly juices are fair game. Keep to those thinner ratios, as high-VG liquid is too thick to wick properly through a pod this size.

How to Set Up the Kangertech Slibox Replacement Pods

Under two minutes.

1. Pull the old pod off the device. It lifts away from the magnetic base with a straight tug.

2. On a new pod, add three or four drops of e-liquid onto the cotton you can see through the fill port. It saves the coil from a dry first puff.

3. Ease out the silicone stopper and fill from the side with your 50/50 E-Liquid or nic salt, keeping just below the top. Push the stopper back in.

4. Click the pod onto the base. The magnets pull it home.

5. Stand it upright and let it settle for a good six minutes so the mesh wicks through fully. Fire it dry, and you will taste it, and the coil will not forgive you.

6. Just draw. The Slibox is draw-activated, so a gentle pull is all it takes. Start soft for the first few.

What's in the Kangertech Slibox Replacement Pods Box

Two Slibox pods, each with the 0.8ohm mesh coil already built in. Nothing else. No device, no charger, no e-liquid. These are refill pods for a Slibox kit you already own, and Pirate Vapes keeps them stocked so a spare is always within reach.

Made Only for the KangerTech Slibox

These pods are cut for one device: the KangerTech Slibox pod kit. Note: These are the sealed 0.8ohm integrated-coil pods, not the empty cartridges used for replaceable 1.2ohm coils. They will not fit other Kanger systems, and other brands' pods will not fit the Slibox, so it is a closed loop by design. For the device itself and other pocket options, browse the Refillable Pod Kits.

About KangerTech

KangerTech is one of the longer-standing names in vaping, going back to the early sub-ohm era with kits like the Subox and Subtank that a lot of people learned on. The Slibox is the brand leaning into simplicity: an ultra-thin, draw-activated pod kit aimed squarely at ex-smokers who want a tidy MTL vape and none of the fuss.

These pods are the running cost side of that system, keeping the kit going long after the first pod fades. See where it fits among our MTL Vape Kits.

Stock Up and Save

Two pods will see most vapers through a couple of weeks, sometimes more, depending on how hard you vape and how sweet your juice is. Sweet, dark liquids clog a coil faster, so heavier users tend to keep a few packs in.

Bundle them through our Plunder Packs and the per-pod price drops. Every order from Pirate Vapes ships same day before 4 pm, packed to arrive intact. Age-verified checkout, over-18s only, all TPD compliant. Free Pirate Post over £40.

Conclusion

The Kangertech Slibox Replacement Pods do one simple job well: keep a Slibox running with a fresh 0.8ohm mesh coil sealed into every pod. Two per pack, 2ml each, a clean MTL draw, and a side fill that takes seconds.

There is nothing to build and nothing to learn, which is the whole point of a pod like this. Keep a pack ahead, and you will never be caught with a burnt coil. Browse more vape accessories, or head back to Pirate Vapes for the full pod and kit range.

FAQs

Which device do these Kangertech Slibox pods fit?

Only the KangerTech Slibox pod kit. They are not cross-compatible with other Kanger devices or other brands.

Do the Kangertech Slibox pods include e-liquid?

No, KangerTech Slibox pods do not come with free e-liquid. 

What resistance are the Kangertech Slibox pods?

Integrated 0.8ohm mesh, tuned for a warm MTL draw. There is no coil to change; when it is spent, you fit a new pod.

What e-liquid should I use with the Kangertech Slibox pods?

50/50, high-PG, or nic salts all work well in the 2ml pod. Skip high-VG juice, as it is too thick to wick through properly.

How long does a Kangertech Slibox pod last?

Usually around a week of daily use per pod, so a two-pack covers a fortnight or so. Sweeter liquids shorten that.

Are the Kangertech Slibox pods refillable and TPD compliant?

Yes to both. Each pod holds 2ml in line with UK rules and refills from the side. Sold to over-18s only through an age-verified checkout.