Lost Vape Thelema Solo 100W Vape Kit

Lost Vape Thelema Solo 100W Vape Kit

The Lost Vape Thelema Solo 100W Vape Kit runs the Quest 2.0 chipset in a leather-and-alloy body. It fires from 5W to 100W. The UB Pro Pod Tank sits on top for direct-to-lung vaping.

Two UB Pro coils come in the box, one mesh and one built for temperature control. A small 0.96-inch screen and USB-C charging round it out. An 18650 adapter is included if you would rather run that cell. You add the battery and e-liquid yourself. Find it in our Vape Kits.

Why vapers choose this:

• Single-cell 100W output keeps the Thelema Solo compact while still driving the 0.15ohm mesh coil with headroom to spare.

• A leather and zinc-alloy body gives the kit a solid, high-end feel rather than a hollow plastic one.

• Two UB Pro coils are included: a 0.15ohm mesh head and a 0.3ohm stainless-steel head for temperature control.

• USB-C charging means a common cable and quicker top-ups than older Micro-USB mods.

• 21700 or 18650 cells both work, with the adapter included, so you can run whichever you own.

Thelema Solo 100W Features

Quest 2.0 Chipset

The Quest 2.0 chipset is the core of the Thelema Solo mod. It fires from 5W to 100W and supports coils from 0.15ohm up to 5ohm, so it drives low-resistance mesh without strain. Beyond straight wattage, it carries VPC, Bypass, Voltage, and full temperature control for nickel, titanium, and stainless steel. Pair it with a High-VG E-Liquid for the sub-ohm coil.

UB Pro Pod Tank

The included UB Pro Pod Tank is a pod-and-tank hybrid: it drops into the mod like a pod but takes replaceable coils like a tank. It fills through a side port with a rubber bung and uses a standard 810 drip tip, which puts it among the easier-to-refill DTL Tank to refill. In the UK it holds 2ml in line with TPD rules.

Two UB Pro Coils

Two coils come in the box. The UB Pro P1 at 0.15ohm is a mesh head rated 70 to 90W for warm, cloudy draws. The UB Pro P3 at 0.3ohm is an SS904 stainless head rated 60 to 70W, and it can run in temperature control. Spare UB Pro heads drop in from the Vape Coils collection.

Single 21700 Battery, USB-C Charging

The Thelema Solo runs on a single 21700 cell, or an 18650 with the included adapter, both sold separately. Removable cells let you carry a charged spare rather than waiting on a cable. When you do charge on board, the USB-C port tops up faster than the Micro-USB found on older mods.

Leather and Zinc-Alloy Build

The chassis pairs a zinc-alloy frame with a leather panel, so the mod feels solid and sits comfortably in the hand at around 150g. At 97.5mm tall and 28.5mm wide it stays slim for a device that still hits 100W. The battery doors are interchangeable on this range, so the look can be changed later.

Thelema Solo 100W Colours

Eight finishes are available, split across a Full Leather series and a Carbon Fibre series. The frame colour and panel pairing decide the look.

#buttons

• Black and Carbon Fibre
• Black and Classic Black
• Gunmetal and Carbon Fibre
• Gunmetal and Ochre Brown
• Matt Red and Carbon Fibre
• Sierra Blue and Carbon Fibre
• SS and Carbon Fibre
• SS and Mineral Green

How to Set Up the Thelema Solo 100W Kit

Around five minutes start to finish, most of it letting the coil soak.

1. Fit a battery. Open the base door and insert a single 21700 the right way round, following the plus and minus markings. For an 18650, seat it in the included adapter first. Browse compatible Vape Batteries if you need a cell.

2. Fit a coil. Press the UB Pro P1 or P3 coil firmly into the base of the UB Pro pod until it seats.

3. Prime the coil. Drip a few drops of e-liquid onto the exposed cotton ports so the wick does not start out dry.

4. Fill the pod. Open the side fill port, add a high-VG e-liquid, then push the bung back in firmly.

5. Let the coil drink. Stand the pod upright for a good five minutes, closer to ten near the top of the coil's range. Firing on dry cotton burns the mesh straight away.

6. Set your wattage. Drop the pod into the mod, power on, and start near the bottom of the coil's range on the screen before raising it to taste.

What's in the Thelema Solo 100W Box

Inside you get:

• The Lost Vape Thelema Solo 100W mod

• The UB Pro Pod Tank

• The UB Pro P1 0.15ohm coil

• The UB Pro P3 0.3ohm SS904 coil

• An 18650 battery adapter

• Spare O-rings

• A USB-C cable

• A user manual and warranty card

There is no battery and no e-liquid included, so add both before you order. Keep a spare pod and a few coils to hand, which you can find with the Replacement Pods collection.

Runs the UB Pro Coil Range

The UB Pro Pod Tank on this kit takes the wider Lost Vape UB Pro coil family, so beyond the two supplied, you can drop in other UB Pro resistances to move between warmer clouds and cooler, flavour-led draws.

The mod is a regulated single-cell device, so it also sits comfortably among our Regulated Mods. What will not fit: coils from other brands, or Lost Vape heads built for a different pod series such as the UB Lite. If a coil is not a UB Pro head, it is the wrong platform for this pod.

About Lost Vape

Lost Vape built its name on leather-clad, well-machined devices that look and feel a step above the usual box mod, and the Thelema line is where that reputation sits.

The Thelema Solo takes the styling of the dual-battery Thelema kits and shrinks it to a single cell, keeping the Quest chipset and the UB Pro pod system. It suits vapers who want a tidy, good-looking mod they can tune rather than a plastic starter device.

Pirate Vapes stocks it as an advanced, external-battery kit rather than a simple pod system.

Stock Up and Save

This kit needs two things it does not ship with: a 21700 or 18650 cell and a way to keep it charged. Sorting both on the same order means the Thelema Solo is ready to vape when it lands, and a spare pod plus a couple of UB Pro coils save a repeat trip.

Every order from Pirate Vapes goes out same-day before 4 pm on working days, with an age-verified checkout and over-18s only.

Conclusion

The Lost Vape Thelema Solo 100W kit is a slim, single-cell box mod matched to the UB Pro Pod Tank, aimed at direct-to-lung vaping at up to 100W.

A leather-and-alloy build, two UB Pro coils and USB-C charging make it a tidy step up, as long as you are happy running an external battery. Explore more Vape Accessories and browse the full lineup at Pirate Vapes.

FAQs

Does the Lost Vape Thelema Solo 100W kit come with a battery?

The Thelema Solo does not include a battery. It runs on a single 21700 cell, or an 18650 with the adapter that comes in the box, both sold separately, so use a quality high-drain cell and a dedicated charger.

What coils does the Thelema Solo 100W use?

The kit uses Lost Vape UB Pro coils. It includes a UB Pro P1 at 0.15ohm, rated 70 to 90W, and a UB Pro P3 SS904 at 0.3ohm, rated 60 to 70W, and other UB Pro heads fit the same pod.

How much e-liquid does the Thelema Solo pod hold?

The UK edition of the UB Pro pod holds 2ml and fills through a side port. A high-VG e-liquid suits the sub-ohm coils best.

Can the Thelema Solo 100W run an 18650 battery?

The Thelema Solo takes a single 21700 cell as standard, and an 18650 adapter is included in the box, so you can run either size depending on which cell you own.

Does the Thelema Solo 100W have temperature control?

The Thelema Solo supports temperature control for nickel, titanium, and stainless steel wire, alongside Wattage, VPC, Bypass, and Voltage modes, all set from the 0.96-inch screen.

How do I fill the UB Pro pod on the Thelema Solo?

Pull out the pod, open the side fill port, add your high-VG e-liquid and push the bung back in firmly. Let a fresh coil stand for several minutes before the first draw so the wick soaks fully.