Lost Vape UB Mini Coils

Lost Vape UB Mini Coils

Two resistances, one honeycomb mesh build, and a fit list that covers most of Lost Vape's pod range. The UB Mini coils come as a pack of 5 in a 0.8ohm head for a warmer restricted-DTL draw at 12 to 17W, and a 1.0ohm head for a tight MTL pull at 9 to 13W.

Both are mesh, both wick fast, and both take nic salt or freebase without complaint. If you run an Orion Mini or an URSA pod, these are the coils it was built around. Pair them with Nic Salts for the classic MTL hit.

Why vapers choose this:

• Two draws from one coil family. The 0.8ohm gives a warmer restricted-DTL hit while the 1.0ohm keeps it tight and MTL, so you pick the feel without switching kit.

• Honeycomb mesh heats evenly across the strip for cleaner flavour and a longer working life than the round-wire heads it replaced.

• A pack of five is a month or more for most people, and coils are the one part you get through fastest.

• Press-fit fitment means no threading and no fuss. Pull the old one, push the new one home.

• Salt or freebase, it copes with both, which keeps your e-liquid options open.

Lost Vape UB Mini Coil Features

The Honeycomb Mesh Is the Point

Lost Vape went with a honeycomb mesh rather than a plain strip, and it earns its place. The pattern spreads heat evenly across a wider surface, so the wick sees a steady temperature and the flavour comes through cleaner. It also tends to hold that flavour for longer before the coil starts tasting tired. More even burn, fewer dry patches.

Which Head Suits Your Draw?

Two options, two feels. The 0.8ohm runs 12 to 17W for a warmer, slightly airier restricted-DTL draw, happiest with 50/50 or High VG E-Liquids. The 1.0ohm sits at 9 to 13W for a tighter MTL pull that suits salts and higher-PG juice. Pick whichever matches how you already vape.

Fast, Clean Coil Swaps

No screw threads here. The UB Mini heads press-fit straight into the pod, so a change takes seconds and your fingers stay clean. Pull the spent coil out of the base, push a fresh one in until it seats, and you are back vaping. Simple by design.

Built Around the Orion and URSA Pods

These were made to slot into Lost Vape's own pod ecosystem, and that tight fitment is why wicking and flavour stay consistent instead of fighting the hardware. Run one of the MTL Vape Kits from that range and the coil behaves exactly as intended. That is the upside of a head made for a specific set of devices.

Salt or Freebase, Your Call

Not every pod coil handles both nicotine types well. These do. Salts at 10 or 20mg suit the tighter 1.0ohm for a smooth, fast hit, while lower-strength freebase pairs nicely with the airier 0.8ohm. Honestly, that flexibility is half the reason the UB Mini range has stuck around this long.

Lost Vape UB Mini Coil Resistance Options

Two heads in the picker. The choice is really about how tight you like the draw and how much vapour you want.

Most popular all-rounder: the 0.8ohm (S1). It runs 12 to 17W and sits between a true MTL and a restricted-DTL draw, warmer and a touch airier. Good pick if you want a bit more vapour and flavour without going full sub-ohm. Works best with 50/50 and higher-VG liquid.

For the tighter, cigarette-style draw: the 1.0ohm (S2). Rated 9 to 13W, it is the MTL option, cooler and more discreet, and it is the natural home for salts and higher-PG juice. If you came off cigarettes and want that familiar pull, start here.

#buttons

• 0.8ohm (S1)
• 1.0ohm (S2)

How to Set Up the Lost Vape UB Mini Coils

Quick swap. Under two minutes, no tools.

1. Take the pod off the device and empty any old liquid if you are changing coils mid-tank.

2. Pull the spent coil free from the base of the pod. It press-fits on seals, so a firm, straight tug releases it.

3. Trickle four or five drops of e-liquid into the wicking windows on the side of the fresh coil, plus one drop straight onto the mesh.

4. Push the new coil into the pod base until it clicks home, then refill the pod with your chosen liquid.

5. Slot the pod back on and leave it standing for a good seven minutes so the mesh saturates fully before you take a draw.

6. Ease in gently. Start near the low end of the wattage range and take a few soft pulls before settling in.

What's in the Lost Vape UB Mini Coil Box

Five coils, sealed and packed, in the resistance you select. That is the lot: no pod, no device, no e-liquid. Pirate Vapes keeps the Orion Mini and URSA hardware these drop into over in the Refillable Pod Kits section if you still need the kit itself.

Made for Lost Vape's Orion Mini and URSA Pods

Fitment is the whole story with any coil, and the UB Mini heads were designed around a specific set of Lost Vape pods. They drop into the Orion Mini and across much of the URSA family, from the Nano and Nano Pro through to the Baby and Baby Pro. The Thelema GO takes them as well.

What they will not fit: pods and tanks from other brands, or Lost Vape kits built on a different coil platform. A UB Mini head only belongs in a device that calls for a UB Mini head. If your current coil is marked S1 or S2 and press-fits into the pod base, you are in the right place. Still, it is worth a quick check against your exact kit before ordering, because the URSA line has grown a lot.

About Lost Vape

Lost Vape built its name on pod systems that feel a cut above, the leather-and-metal Orion and URSA kits that turned plenty of MTL vapers into loyalists. The UB Mini coil platform is the engine behind that range.

It is the part doing the actual work: honeycomb mesh, fast wicking, and a fit tuned to Lost Vape's own pods rather than a generic one-size head. Getting the coil right for the device is a big part of why the Orion and URSA kits keep their name for clean, consistent flavour.

Stock Up and Save

A single UB Mini head lasts most vapers a week or two before the flavour dips, so a pack of 5 works out to a couple of months of steady use. Buy two packs and the cost per coil drops while you build a proper buffer for when one burns out.

Every order from Pirate Vapes ships same day before 4pm in padded packaging. All stock is TPD compliant, the checkout is age-verified, and it is strictly over-18s only.

Conclusion

The Lost Vape UB Mini coils do the simple thing well: two solid mesh heads that cover both a warmer restricted-DTL draw and a tight MTL one, in a fit tuned to the Orion Mini and URSA pods.

Pick the 0.8ohm for more vapour and warmth, or the 1.0ohm for a cooler, cigarette-style pull. Stock up on coils and grab any Vape Accessories you need in the same order at Pirate Vapes.

FAQs

Which kits do the UB Mini coils fit?

The Lost Vape Orion Mini and most of the URSA pod range, including the Nano, Nano Pro, Baby, and Baby Pro. The Thelema GO takes them as well.

Are the UB Mini coils mesh?

Yes, honeycomb mesh on both resistances. That is what gives the cleaner flavour and the steadier wicking.

UB Mini coils 0.8ohm or 1.0ohm, which should I pick?

The 0.8ohm for a warmer, airier restricted-DTL draw. The 1.0ohm for a tighter MTL pull with salts. Match it to how you already vape.

What e-liquid works best with the UB Mini coils?

The 1.0ohm likes salts and 50/50. The 0.8ohm handles 50/50 and higher-VG liquid for a touch more vapour.

How long does one UB Mini coil last?

Usually one to two weeks. Sweet, dark liquids gunk the mesh faster, so those shorten it. Prime it properly and you reach the top end.

Do I really need to prime the UB Mini coils?

Yes, every time. A dry mesh coil fired on the first pull is a ruined coil. Wet the wicking windows and let it soak before you vape.