Lost Vape Ursa Nano 3 Pod Kit

Lost Vape Ursa Nano 3 Pod Kit

A slim zinc-alloy pod device in ten finishes, built around a 1200mAh battery and a genuinely simple draw. The Lost Vape Ursa Nano 3 fires up to 30W, runs entirely on draw activation with no button to press, and takes refillable 2ml side-fill pods with integrated coils.

Adjustable airflow lets you move from a tight MTL pull to a looser restricted direct-lung draw, and the two pods in the box cover both from the start. It is one of the more pocketable Refillable Pod Kits going, and a tidy pick for anyone stepping off disposables at Pirate Vapes. TPD compliant, over 18s only.

Why vapers choose this:

• Two pods in the box means both draw styles are covered on day one, a warmer 0.6 ohm and a tighter 0.8 ohm, with no extra spend.

• Draw activation removes the button entirely. Fill it, fit it, and inhale.

• A 1200mAh battery is generous for a device this slim, comfortably an all-day cell for most vapers.

• Refillable 2ml side-fill pods cut running costs against disposables and let you use whatever e-liquid you like.

• Ten finishes across the Silk, Glacial and Twill ranges, so the look is yours to pick.

Ursa Nano 3 Features

A 1200mAh Battery in a Slim Frame

When it does run down, USB-C charging tops it back up. The built-in LED indicator pulses Green (high), Blue (medium), or Red (low) when you inhale, so you always know roughly how much battery is left.

Draw Activation, No Button

There is no fire button to hold. The Ursa Nano 3 uses draw activation, so it fires the moment you inhale and stops when you stop. Paired with the Lost Vape Quest 2.0 chip, the draw is quick and consistent, which makes this one of the easier kits to hand to someone moving over from disposables for the first time.

Adjustable Airflow, Two Draw Styles

An airflow switch on the side lets you tune the draw from tight to open. Close it down, and the kit sits firmly in MTL territory for a cigarette-like pull. Open it up, particularly on the 0.6 ohm pod, and it loosens into a restricted direct-lung draw with more air and warmth. One device, two distinct styles, adjusted in seconds.

Refillable Side-Fill Pods

The Ursa V2 pods hold 2ml in TPD trim and fill from the side through a silicone-stoppered port, which keeps refills clean and quick. They clip on magnetically, so there is no threading or fiddling, and the integrated coil means you replace the whole pod when the flavour fades rather than wrestling with a separate coil. Keep a couple of Replacement Pods on hand, and you are never caught out.

Zinc-Alloy Build in Ten Finishes

The chassis is zinc alloy rather than plastic, which gives the Nano 3 a solid, quality feel in the hand. It comes in three finish families: the soft Silk range, the cool Glacial range, and the textured Twill range. That spread of ten options is unusual at this size and price, and it makes the kit feel more like a considered choice than a throwaway.

Ursa Nano 3 Colours

Ten options, spanning three distinct finishes. Whether you want something clean and pale or dark and textured, there is a match here.

#buttons

• Best Colour
• Glacial Black
• Glacial Blue
• Glacial Silver
• Silk Blue
• Silk Rose
• Silk White
• Twill Black
• Twill Orange
• Twill Violet

How to Set Up the Ursa Nano 3

Refilling and starting up takes a couple of minutes, most of it soaking.

1. Pull the pod off the device. It lifts away from the magnetic connection with no twisting.

2. Open the silicone stopper on the side of the pod to reveal the fill port.

3. Fill with your e-liquid, keeping to the side of the port and avoiding the central airflow tube. Reseat the stopper firmly.

4. Clip the pod back on and check it sits flush against the magnetic contacts.

5. Let it stand for about five minutes so the coil wicks fully. Skipping this is the quickest way to catch a dry, burnt first pull.

6. Set your airflow and inhale. There is no button, so the device fires on the draw. Adjust the airflow switch until the pull feels right.

What's in the Ursa Nano 3 Box

The kit includes:

• the Ursa Nano 3 device,

• a 0.6 ohm Ursa V2 pod,

• a 0.8 ohm Ursa V2 pod,

• a USB-C charging cable,

• a branded lanyard,

• a warranty card,

• and a user manual.

No e-liquid is included, so remember to add a bottle to your order.

A Refillable Pod Kit Built for MTL and RDL

The Ursa Nano 3 is a refillable pod system aimed at MTL and restricted direct-lung vapers, and the two included pods set the tone. The 0.6 ohm pod runs warmer and airier for a looser RDL draw, pairing brilliantly with 50/50 freebase e-liquids.

The 0.8 ohm pod tightens things up with more throat feel for a classic mouth-to-lung draw, which is the natural match for 50/50 nic salts. A 1.0 ohm Ursa V2 pod is available separately if you want the tightest MTL option of the three.

It uses the Ursa V2 pod specifically, so when you restock, that is the pod to look for. Pair it with the right e-liquid for each draw, and you have a flexible little kit that covers most everyday vaping styles. Browse more MTL Vape Kits if you want to compare the draw against other options.

About Lost Vape

Lost Vape made its name on premium mods, with leather-and-alloy devices like the Centaurus and Thelema that set a high bar for build quality. The Ursa range brings that same engineering focus to compact pod systems.

The Nano 3 is a good example: a zinc-alloy chassis, a dependable Quest 2.0 chip, and a simple draw-activated setup that just works. It is the kind of kit that earns Lost Vape its steady reputation among UK vapers who want reliable hardware without the fuss.

Stock Up and Save

The maths on a refillable kit is straightforward. Two pods come in the box, each good for many refills, and a 2ml fill of your own e-liquid costs a fraction of a disposable for the same vaping. Add a bottle of E-Liquids and you are set for weeks rather than days.

Every order from Pirate Vapes ships the same day when placed before 4 pm, with age-verified checkout and over 18s only. Browse the wider Rechargeable Vapes range while you are here.

Conclusion

The Lost Vape Ursa Nano 3 is a slim, well-built pod kit that keeps things simple: a 1200mAh battery, draw activation, adjustable airflow, and refillable 2ml pods in two draw styles out of the box. Ten finishes across the Silk, Glacial and Twill ranges mean you can match it to your taste, and the refillable format keeps your running costs low.

A solid everyday choice, and a genuine step up from disposables. Browse the full Pod Kits range and the rest of the catalogue at Pirate Vapes.

FAQs

Does the Ursa Nano 3 have a fire button?

No. It is fully draw-activated, so it fires when you inhale and stops when you stop. There is nothing to press.

What pods does the Ursa Nano 3 use?

The Lost Vape Ursa V2 pod, with an integrated coil. The kit includes a 0.6 ohm and a 0.8 ohm pod, and a 1.0 ohm version is available separately.

How big are the Ursa Nano 3 pods?

2ml in TPD trim, filled from the side through a silicone-stoppered port. They connect to the device magnetically.

Which Ursa Nano 3 pod should I start with?

The 0.8 ohm for a tighter, more cigarette-like MTL draw and nic salts, or the 0.6 ohm for a warmer, airier restricted direct-lung draw.

Is a charging cable included with the Ursa Nano 3?

Yes. A USB-C charging cable is included in the box, alongside a lanyard for easy carrying.

How long does the Ursa Nano 3 battery last?

The 1200mAh battery is an all-day cell for most MTL vapers. Heavier use or the airier 0.6 ohm pod will run it down faster.