OXVA Artio Replacement Pods

OXVA Artio Replacement Pods

No coil to unscrew, no coil to re-seat. The OXVA Artio replacement pods build the coil straight into the cartridge, so when the flavour fades, you drop in a fresh pod and carry on.

Each is a 2ml refillable cartridge with an integrated mesh coil, sold in a pack of 3, and comes in two resistances: a 0.8ohm for warmer draws with more vapour and a 1.2ohm for a tighter MTL pull. They fit the OXVA Artio pod kit and fill through a silicone-stoppered port. Pirate Vapes stocks them among its Replacement Pods and Refillable Pod Kits range.

Why vapers choose these pods:

• Two resistances cover two moods: the 0.8ohm for a warmer, more vaporous draw and the 1.2ohm for a tighter, cooler mouth-to-lung pull, so the same little device can lean either way depending on the pod you fit.

• An integrated mesh coil means no coil changes, ever.

• Magnetic fitting drops the pod on and off in a second.

• A silicone-stopper refill keeps top-ups clean and quick.

• A pack of 3 keeps fresh flavour on hand for weeks.

OXVA Artio Replacement Pods Features

Built-In Mesh Coil

The whole appeal of an integrated pod is that the fiddly part is gone. The mesh coil sits inside each cartridge, heating your liquid evenly for clean, consistent flavour, and when it tires, you simply drop in a fresh pod. No unscrewing, no dry wicks, no mess. It is the low-maintenance way to run a pod kit.

0.8Ω and 1.2Ω Options

The range gives you a choice. The 0.8ohm runs warmer at 12-15W for more vapour and a bigger flavour hit, while the 1.2ohm sits at 9-11W for a tighter, cooler MTL draw with a sharper throat feel. Pick by mood, or keep both in rotation.

Easy Silicone Stopper Refill

Topping up is a small job. Lift the silicone stopper, sit your bottle nozzle in the inlet, and fill to the line. The stopper seals back down to keep liquid where it should be, and it pairs cleanly with Nic Salts or a 50/50 E-Liquid blend, which is exactly what these coils are built for.

Magnetic Pod Connection

The pod holds on with magnets rather than a clip or thread, so it lines up on its own and clicks into place first time. Swapping between the 0.8ohm and 1.2ohm takes a second, which makes changing your draw partway through the day genuinely easy.

Compact Pod Design

The Artio itself weighs next to nothing, and these pods keep that spirit: small, simple, and built to just work. Fill, click, draw. For anyone who wants a fuss-free MTL setup they can carry anywhere, the pod does its job without asking anything of you.

OXVA Artio Replacement Pods Resistance Options

Two options in the range, and the pick comes down to how you like to draw.

The flavour-forward choice is the 0.8ohm. Running at 12-15W, it gives a warmer draw with more vapour and a bigger flavour hit, and it suits 50/50 liquid well. If you like a fuller, slightly looser MTL, start here.

For a tighter pull, the 1.2ohm is the one. At 9-11W, it delivers a cooler, sharper mouth-to-lung draw closer to a cigarette, produces less vapour, and the higher resistance means the coil tends to last a little longer. It is the natural match for nic salts.

#buttons

• 0.8 Ohm
• 1.2 Ohm
  

How to Set Up the Artio Pods

Fill, soak, then prime.

1. Take a fresh pod and lift the silicone stopper on the side to open the fill inlet.

2. Fill to the 2ml line with your chosen nic salt or 50/50 liquid, then press the stopper back in firmly.

3. Click the pod onto the magnetic base of your Artio battery.

4. Stand the device upright and give the mesh coil five to ten minutes to soak completely through before firing it. Skipping this will instantly burn the new coil.

5. Draw steadily on the mouthpiece to vape and let the flavour settle over the first few puffs.

What's in the OXVA Artio Replacement Pods Box

Three OXVA Artio replacement pods in your chosen resistance, either 0.8ohm or 1.2ohm.

There is no device and no e-liquid included, so you will need your OXVA Artio and a bottle of your chosen liquid to get going.

Pods Made for the OXVA Artio

These cartridges are shaped for the OXVA Artio Pod Kit and nothing else. They will not fit the Xlim range or other OXVA devices, which use their own separate pods, so when you restock, make sure you are buying Artio cartridges specifically. You will find the matching kit and other spares in the OXVA Vape Range.

About OXVA

OXVA made its name on the Xlim series, one of the most popular refillable pod lines in the UK, and the Artio is its ultra-portable, pen-style take on simple MTL vaping.

The brand leans hard on mesh coil work for flavour, and these pods carry that over: an integrated mesh build in a light, no-nonsense cartridge. For vapers who want a compact device that is easy to live with, OXVA is a name that has earned its place among the better MTL Vape Kits around.

Stock Up and Save

Mesh coils give their best flavour when they are fresh, and they dull gradually with use, so having a pack of 3 on hand means you are always a quick swap away from a crisp, clean pod. Keep a set in the drawer, and you will never be caught mid-week with a tired coil.

Pirate Vapes ships every order the same day when it is placed before 4 pm. All stock is TPD compliant, checkout is age-verified, and sales are strictly over-18s only. Free Pirate Post applies on orders over £40.

Conclusion

If you run an OXVA Artio, these are the pods that keep it going. Two resistances give you a warmer, fuller draw or a tight MTL one, the integrated mesh coil means no coil changes, and a fresh pod brings the flavour straight back.

Pair them with a nic salt or a 50/50 bottle, and a pack of 3 will see you through weeks. Browse more Vape Accessories or head back to Pirate Vapes to finish your order.

FAQs

What device do OXVA Artio Pods fit?

Only the OXVA Artio Pod Kit. They are not interchangeable with the Xlim range or other OXVA pods.

What is the difference between 0.8 and 1.2 OXVA Artio Pods?

The 0.8ohm gives a warmer draw with more vapour and fuller flavour. The 1.2ohm is a tighter, cooler MTL draw with longer coil life.

Do OXVA Artio Pods come with e-liquid?

No, they arrive empty. Fill through the silicone-stopper port with your own nic salt or 50/50 liquid.

Do I need to change OXVA Artio Pods’ coil?

No. The mesh coil is built into the pod, so you replace the whole pod when the flavour fades.

How many OXVA Artio Pods are in a pack?

Three. A pack of 3 is the standard for the Artio.

How long do OXVA Artio Pods last?

Usually a week or two per pod, depending on your liquid and how often you vape. Darker, sweeter blends wear the coil faster.