OXVA Origin 2 Pod Kit

OXVA Origin 2 Pod Kit

Eighty watts from a pod kit that fits in a jeans pocket. The OXVA Origin 2 80W Pod Kit runs on a single 18650 battery and pushes 5W to 80W through OXVA's UNIONE coil platform, which is what lets one small device cover mouth-to-lung, restricted direct-lung, and full direct-lung vaping.

The 2ml refillable pod fills from the side, the airflow adjusts by twisting the pod, and a 0.69-inch OLED screen keeps your wattage, resistance and battery level in view. Built from zinc alloy, leather and PCTG with Type-C fast charging, it is a genuine sub-ohm setup without the bulk of a full mod. Battery sold separately. Browse the full Refillable Pod Kits range for more options.

Why vapers choose this:

• One device, every vaping style. The UNIONE platform runs coils from 1.0ohm for tight MTL down to 0.15ohm for full sub-ohm DTL, so the Origin 2 flexes to however you want to vape rather than locking you into one draw.

• 80W from a single 18650. Serious power for the size, and a swappable battery means you carry a spare instead of waiting on a charge.

• Type-C 5V/2A charging tops the battery up in under an hour when you do charge on board.

• RDA-style adjustable airflow twists open or closed on the pod itself.

• Upgraded leak protection and a magnetic pod make daily carry less of a gamble.

OXVA Origin 2 Pod Kit Features

Two Coil Systems, One Chassis

This is what sets the Origin 2 apart. The kit ships with the UniONE pod, which takes OXVA's UniCOIL series, covering 0.2ohm, 0.3ohm, 0.5ohm, and a 1.0ohm MTL option, plus an RBA for tinkerers. Fit the separately sold UniONE PnM tank, and the same device runs UniPLUS coils in 0.15ohm and 0.3ohm for higher-wattage clouds. Start simple, expand later.

80W That Feels Like More

Do not let the size fool you. Running the 0.2ohm UniCOIL at 40 to 60W, the Origin 2 produces the kind of warm, dense vapour you would expect from a dual-battery mod with a full sub-ohm tank on top. The single 18650 delivers genuine punch, and the OXVA Photon chipset keeps the output steady from a full charge down towards empty.

Adjust Your Draw With a Twist

The airflow works RDA-style. Twist the pod, and you move from a wide-open, airy direct-lung draw to something tighter and more restricted. No separate airflow ring to fiddle with on the standard setup, no menus to dig through. Want a cooler, breezier vape after lunch and a tighter pull in the morning? Twist and go.

A Screen That Tells You What You Need

The 0.69-inch OLED shows wattage, coil resistance, battery level, and a puff counter, with a padlock icon so you know when the device is locked. There is no complicated menu system here, which is the point. It stays simple to read and simple to use, which suits vapers who want the power without the palaver. Pair it with a Vape Battery to get started.

Built to Be Carried

Zinc alloy frame, stitched leather grip panel, PCTG pod. At 122.1 x 33mm and 119g, it is pocket-friendly and feels solid rather than plasticky. The pod clicks in on strong magnets, and OXVA's upgraded leak protection means fewer nasty surprises when you pull it out of a bag.

OXVA Origin 2 Pod Kit Colours

Six finishes in the store picker, each using the same leather-and-metal construction with a different colourway. Match it to your style.

#buttons

• Black
• Black Red
• Gun Metal
• SS (Stainless Steel)
• Sunset Blue
• Turquoise Green

How to Set Up the OXVA Origin 2 Pod Kit

First-time setup takes a couple of minutes.

1. Insert a charged 18650 battery (sold separately) by unscrewing the base cap, seating the cell the correct way round, and screwing the cap back on.

2. Fit your chosen UniCOIL into the UniONE pod, adding the supplied UniCOIL airflow ring where the coil requires it.

3. Drip five or six drops of e-liquid onto the coil's exposed cotton, then fill the pod through the side port and close it firmly.

4. Click the pod into place on the magnetic connection and set your wattage to match the coil printed on its side.

5. Stand the kit upright and leave it to rest for ten minutes so the wick fully absorbs before the first pull. Fire it dry, and you ruin the coil.

6. Start at the lower end of the coil's wattage range and increase in small steps until the draw feels right.

What's in the OXVA Origin 2 Pod Kit Box

The box contains:

• The Origin 2 device,

• one 2ml UniONE pod,

• a 0.2ohm UniCOIL,

• a spare 0.3ohm UniCOIL,

• the UniCOIL airflow ring

• and a user manual.

The 18650 battery is not included, so pick one up alongside the kit if you do not already own one. There is no e-liquid in the box either, and the UniPLUS coils and PnM tank are sold separately.

Compatible With the Full UNIONE Coil Family

The Origin 2 is built around OXVA's UNIONE system. The supplied UniONE pod uses the UniCOIL range, and adding the separately sold UniONE PnM tank opens up the UniPLUS coils for higher-wattage direct-lung vaping. Between the two, you get a wide spread of resistances from a single device.

What it will not take is OXVA's other pod platforms. The Xlim, NeXlim and VPrime pods are separate systems and do not fit the Origin 2. Stick to the UNIONE family, and you are covered. Browse the full OXVA Vapes collection for compatible coils and spares.

About OXVA

OXVA has carved out a strong reputation for refillable pod systems that punch above their price, and the Origin line is where the brand shows off its engineering. The UNIONE coil platform behind the Origin 2 is the clever bit: rather than tying you to one pod and one draw, it lets a single compact device span mouth-to-lung through to full direct-lung by swapping coils and pods.

That flexibility, paired with the Photon chipset and genuinely premium materials, is why OXVA kits keep landing on best-of lists for versatile everyday vaping.

Stock Up and Save

A kit is only the start. Keep a set of spare UniCOIL heads and a second 18650 in the drawer, and you are never caught out mid-week when a coil fades, or a battery runs flat.

Every order from Pirate Vapes ships same day when placed before 4 pm, packed to survive the post. All hardware is TPD compliant, sold through an age-verified checkout to over-18s only.

Conclusion

The OXVA Origin 2 80W is one of the most versatile compact pod kits going. Eighty watts from a single swappable battery, a coil platform that stretches from tight MTL to full sub-ohm clouds, a readable screen, twist airflow and a build that feels a class above its price.

Add a battery and some coils, and it will happily be the only device you carry. Explore more Vape Kits and Vape Accessories, or head back to Pirate Vapes for the full range.

FAQs

Does the Origin 2 come with a battery?

No. It runs on a single 18650 that you buy separately. Grab a quality cell and a charger at the same time if you do not already own one.

What coils does the Origin 2 use?

The supplied UniONE pod takes UniCOIL heads (0.2, 0.3, 0.5 and 1.0ohm plus RBA). Add the PnM tank for UniPLUS coils in 0.15 and 0.3ohm.

Can the Origin 2 do both MTL and DTL?

Yes, and that is the whole appeal. The 1.0ohm UniCOIL gives a tight mouth-to-lung draw, while the 0.2ohm and lower run warm direct-lung clouds. Twist the airflow to fine-tune.

How much e-liquid does the Origin 2 pod hold?

The UK pod holds 2ml, in line with TPD rules. Fill it from the side port and keep an eye on the level through the pod.

What wattage should I run the Origin 2?

Match it to the coil. The 0.2ohm likes 40 to 60W, the 1.0ohm sits at 10 to 15W. The screen shows the resistance so you can set it correctly.

Is the Origin 2 good for a beginner?

It is a capable step up rather than a first-ever device. If you are comfortable with coil priming, wattage, and 18650 battery safety, it is a brilliant do-everything kit.