Peeky Blenders 100ml Shortfill E-Liquid 

Over forty flavours. Character names on every bottle. Made in Hull by Kingston in a facility most budget shortfill brands would not get within a mile of. The Peeky Blenders range is a 100ml shortfill at 50/50 VG/PG, sitting in a 120ml bottle with room for two 10ml nic shots to hit 3mg. No nicotine in the bottle as shipped. 

The 50/50 blend means this e-liquid actually works in pod kits and sub-ohm tanks without you needing to buy two different liquids for two different devices, which is rarer than it should be in the shortfill market. Kingston produces the whole range in an ISO Class 7 cleanroom, and you get a childproof cap, tamper-evident seal, and a flip-top nozzle that controls liquid flow properly. 

TPD compliant. Over 18s only. Pirate Vapes ships every order age-verified.

Why vapers choose this:

• Forty-plus flavours across fruit, slush, menthol, candy, dessert, and soda categories, and the quality holds up across all of them, which is honestly unusual for a range this big

• ISO Class 7 cleanroom production in Hull puts Kingston's manufacturing on a level that most shortfill brands charging twice the price cannot match

• 50/50 VG/PG ratio wicks properly in pod coils running at 10W, and in sub-ohm mesh running at 45W, so one bottle covers whatever device you happen to pick up that morning

• Flip-top nozzles on recycled plastic bottles give you actual control when you pour, instead of the usual squeeze-and-pray situation

• Two nic shots, shake, done. The 120ml bottle leaves just enough headroom for two 10ml shots to bring it to 3mg without any maths beyond the obvious

Peeky Blenders 100ml E-Liquid Features

Kingston Runs a Proper Lab in Hull

Not a warehouse with a mixing station. Kingston operates an ISO Class 7 cleanroom, which caps airborne particle counts at pharmaceutical-grade levels. Practically speaking? Your coils last longer because there is less residue in the liquid. 

The flavour stays cleaner deeper into the coil's life. And the consistency between bottles is noticeably better than what you get from brands mixing in less controlled environments. 

Hull is not the first city you think of when someone says "e-liquid", but Kingston has been producing there for years, and the results speak for themselves.

That 50/50 Ratio Is Not a Compromise

Most shortfills default to 70/30 VG/PG. Bigger clouds. Thicker vapour. Sounds great on the label. But if you own an XROS or a Caliburn or any MTL pod, 70/30 wicks like treacle through a straw and gives you dry hits within minutes. 

Peeky Blenders runs 50/50 across the entire range. It wicks fast in low-wattage pods, performs perfectly well in sub-ohm tanks at moderate wattage, and the flavour stays sharp because the PG carries it properly. Not a compromise. A better choice for most setups.

Shortfill Maths Without a Calculator

100ml of liquid in a 120ml bottle. Two standard 18mg freebase nic shots fit in the space left over. Pour them in, seal the cap, and give it a solid shake for thirty seconds or so. 

You end up with 120ml at 3mg. If you want 6mg, you would need 36mg nic salt shots instead, but check your device can handle that strength first. The flip-top nozzle has a wide enough opening that nic shot bottles pour straight in without a funnel or a mess on the counter.

Flip-Top Nozzles. Finally.

Small thing. Big difference. The flip-top nozzle on every Peeky Blenders bottle controls liquid flow in a way that standard shortfill squeeze bottles absolutely do not. You tilt, you squeeze gently, the liquid goes where you point it. 

No glugging. No overflow. No wiping down your tank because the bottle decided to dump 5ml into a 2ml pod. Every bottle also uses recycled plastic, which is a nice touch, and the childproof cap actually reseals properly after repeated use.

Forty Flavours and Most of Them Are Worth Trying

A range this size usually means ten decent options buried under thirty forgettable ones. Peeky Blenders gets away with it because Kingston spreads the lineup across genuinely different categories. Proper menthols. Actual candy recreations. Fizzy soda profiles that taste like fizzy soda. Slush flavours. Desserts. 

And a bunch of straight fruit mixes for people who just want fruit. You can rotate through a different 100ml Shortfill every week for most of a year and still have options left.

Peeky Blenders 100ml E-Liquid Flavours List

Every bottle has a character name printed on it alongside the flavour profile, which makes the range look distinct on a shelf. 

#buttons

• Artur Red
• Ascot
• Billy Boys Menthol
• Black Country god
• Blue opieum
• Blue Raspberry Slush
• Brummie
• Bugsy Malom
• Campbell
• Cambem Town
• Campone
• Charlie Strong
• Curly
• Derby Day
• Doctor Poop
• Final Hurder
• Gambino
• Gangster
• Goodfellas
• Garrison
• jeremiah
• Major
• Polly Pink
• Peeky Pastels
• Razor
• Red Light
• Tummy Gun
• Wall Street

Full range also includes: Brilliant Chang, Wall Street, Ascot, Curly, Brummie Gangster, Capone, Goodfellas, McGavern, Shot In The Dark.

How to Set Up the Peeky Blenders 100ml E-Liquid

1. Push down and twist the childproof cap anticlockwise. Pull it off and flip the nozzle open.

2. Add your nic shots first if you want nicotine. Two 18mg shots straight into the bottle for 3mg final strength. They fit through the opening without a funnel.

3. Cap it and shake hard for thirty to forty seconds. Not a gentle swirl. A proper, aggressive shake. Lazy mixing leaves pockets of concentrated nicotine that taste harsh and burn your throat on random draws.

4. Fill your tank or pod with the flip-top nozzle. Tilt the bottle slowly and squeeze with light pressure. Stay clear of the central airflow tube if you are filling a tank.

5. Leave a fresh coil alone for at least six minutes before you fire it. The 50/50 blend wicks faster than thicker liquids, sure, but new cotton still needs time to pull liquid through from the inside out. Skip this step, and you scorch the wick permanently.

6. Start low on wattage. MTL pods, stay between 8 and 16W. Sub-ohm tanks, start around 25W and climb to 50W depending on the coil.

What's in the Peeky Blenders 100ml E-Liquid Box

One 120ml bottle with 100ml of Peeky Blenders e-liquid inside. 0mg nicotine. Childproof cap on, tamper seal unbroken, flip-top nozzle ready to go. No nic shots in the box. No device. No coils. Just the liquid.

If you want nicotine, pick up nic shots separately. The Nicotine shots section has the standard 18mg freebase bottles that pair with this.

The 50/50 Shortfill That Genuinely Works in Everything

50/50 VG/PG makes the Peeky Blenders range one of the more versatile shortfills on the market. MTL Pod Kits from Vaporesso, Uwell, OXVA, SMOK, and Aspire all wick this blend properly. Pen-style devices handle it fine. Sub-ohm tanks at moderate wattage get decent vapour and clean flavour from it.

Where it does not belong: extreme high-wattage builds above 80W where you really need a 70/30 or 80/20 liquid. But for the vast majority of vapers using everyday kit, this ratio covers everything without asking you to think about it.

About Peeky Blenders

Kingston makes this range, and they have been doing it for a while now out of their facility in Hull. The ISO Class 7 cleanroom is the detail that separates them from the dozens of shortfill brands mixing liquid in less controlled environments. 

Peeky Blenders launched as a 50/50 shortfill line with character-themed branding, which was a strange choice at first glance but actually makes the bottles instantly recognisable. The range grew past forty flavours spanning fruit, slush, menthol, candy, dessert, and soda. 

All bottles are recycled plastic, produced and filled entirely in the UK. Kingston also runs their own Kingston E-Liquid brand alongside this one, making them one of the bigger independent producers in the north of England.

Stock Up and Save

Forty flavours is a lot of ground to explore, and honestly the best approach is to grab three or four you would not normally pick and see what lands. 

The character names make choosing feel like a lucky dip, which is half the fun. Pick up a few through the Plunder Packs and the per-bottle price comes down. 

Pirate Vapes ships every bottle in protective packaging to keep those flip-top nozzles from cracking in transit. TPD compliant, age-verified checkout, over 18s only. Same-day dispatch before 4 pm. Spend over £40, and you get Free Pirate Post.

Conclusion

Peeky Blenders does three things well. The flavour range is massive and genuinely varied. The 50/50 ratio works in basically every device most vapers own. And the ISO Class 7 production means the liquid itself is clean, consistent, and kind to your coils. 

Forty-plus flavours at 100ml per bottle, all at the shortfill price point, all made in Hull. If your current shortfill brand only comes in 70/30 and you have been dealing with pod coils that wick badly because of it, Peeky Blenders fixes that problem immediately. 

Worth a look. Browse more shortfills, vape accessories, and the full catalogue at Pirate Vapes.

FAQs

What VG/PG ratio do the Peeky Blenders shortfills use?

50/50. Works in MTL pods and sub-ohm tanks. Wicks faster than 70/30 and carries flavour more clearly than high-VG blends.

How do I add nicotine to Peeky Blenders e-liquid?

Two 18mg freebase nic shots into the bottle. Cap it. Shake it hard for thirty seconds. That gives you 120ml at 3mg. Want 6mg? You would need 36mg salt shots, but make sure your device handles that.

Do these Peeky Blenders shortfills work in a pod kit?

Yes. Easily. The 50/50 blend wicks properly in coils above 0.6ohm running between 8 and 16W. Vaporesso XROS, Uwell Caliburn, OXVA Xlim, SMOK Novo. All fine.

Where are Peeky Blenders made?

Hull. Kingston manufactures and fills every bottle in their own ISO Class 7 cleanroom facility. Everything stays in the UK.

How many flavours does Peeky Blenders 50/50 shortfill have?

Over forty, spread across fruit, slush, menthol, candy, dessert, and fizzy soda. Shellberg, Winston Churchill, and Campbell are the ones most people start with.

How long does a Peeky Blenders 100ml bottle last?

Depends entirely on your setup and how much you vape. A lighter MTL user might get two or three weeks out of one bottle. Sub-ohm at 40W? Closer to a week. Maybe ten days if you are not chain-vaping.