SKE 30K Pro Max Refill Pods

Drop-in Replacement Pods for the SKE 30K Pro Max kit. Each pack holds four pieces: two pods at 1.8ml each and two containers at 8.2ml each, adding up to 20ml of e-liquid at 20mg nic salt strength using SKE's V2 recipe.

The mesh coil comes pre-installed inside every pod, so there is nothing to prime or assemble beyond clicking the container onto the pod and sliding it into your device. Same-flavour packs carry two pods of one flavour. Dual packs pair two different flavours for the rotating mouthpiece. Over 18s only.

Why Vapers Choose SKE 30K Pro Max Refill Pods:

• 20ml of e-liquid per pack. Two pod-and-container units in every box, each holding 10ml. 
• Zero maintenance between swaps. The mesh coil arrives pre-primed inside every pod. Pull the old unit out, click the new one in, inhale.
• Auto-refill keeps the coil saturated. The 8.2ml container feeds liquid into the 1.8ml pod through a sealed internal channel. 
• 20 flavour options to rotate through. Ten same-flavour packs for an all-day single-note vape, ten dual editions for twist-to-switch variety. 
• Cost per ml sits well below disposables. At 20ml per pack, the running cost of the 30K Pro Max system undercuts single-use alternatives significantly.

Up to 30,000 Puffs Per Pack

Each refill pack holds two pod-and-container units rated at approximately 15,000 puffs each, combining for a total of around 30,000 puffs per pack. That is roughly equivalent to 50 standard 600-puff disposables from a single purchase. Actual count shifts with draw length and frequency, and running both sides evenly will give you the most balanced lifespan across the pack.

Pre-Installed Mesh Coil

Every pod ships ready to fire. The mesh coil is factory-fitted inside the pod housing and comes pre-primed with e-liquid, so there is no wait time after inserting a fresh pack. Mesh distributes heat more evenly than standard round-wire coils, which translates to fuller flavour extraction and a more stable vapour density from the opening draw right through to the final one. 

Same-Flavour and Dual Flavour Packs

With the twist-to-switch mouthpiece on the 30K Pro Max device, dual editions let you alternate between the two flavours throughout the day. You can also mix and match by loading one pod from a single edition alongside one from a different single edition to build your own pairing.

SKE V2 Nic Salt Recipe

The e-liquid inside every pod is SKE's V2 formula from the Crystal range, running at 20mg in a 50/50 VG/PG ratio. This is the same recipe that built the Crystal Bar's reputation for clean, well-separated flavour notes, and a gentle throat feel on the inhale. 

Device-Specific Fit

These pods connect to the SKE 30K Pro Max and nothing else. The pod shape, the container clip, and the airflow channel are all engineered for this one device. This dedicated fit means every pod sits flush and sealed inside the device with no air gaps, no wobble, and no leaking.

SKE 30K Pro Max 2-in-1 Vape Refill Pods Flavours List

Every flavour in the range uses the same SKE V2 nic salt recipe at 20mg. Same-flavour packs give you two pods of one flavour. Dual editions pair two complementary profiles for the twist-to-switch mouthpiece.

Single Flavours

Dual Flavour Editions

Each dual edition pairs two flavours in one pack. Rotate between them using the twist mouthpiece on your device.

How to Set Up the SKE 30K Pro Max 2-in-1 Vape Refill Pods

1. Remove the two pods and two refill containers. Peel off any protective stickers and pull out all silicone bungs from both the pods and the containers.
2. Push the 8.2ml refill container firmly onto the 1.8ml pod until you hear or feel a click. This engages the auto-refill seal.
3. If your device still has an old pod unit inside, pull it straight out.
4. Slide the assembled pod-and-container into the device. It should sit firmly with no wobble.
5. Repeat for the second side if you are loading a dual edition or two single-flavour pods at once.
6. The device is draw-activated. No buttons needed.
7. Rotate for the other flavour. Turn the mouthpiece to move airflow across to your second loaded pod.

What's in the SKE 30K Pro Max 2-in-1 Vape Refill Pods Box

Each pack contains four pieces in total. You get: 

• Two prefilled pods (1.8ml each, with the mesh coil already fitted inside)
• Two refill containers (8.2ml each) that clip onto the pods to form two complete units.

The pack does not include the device itself or a USB-C cable. You need the SKE 30K Pro Max kit (sold separately) to use these pods.

Designed Exclusively for the SKE 30K Pro Max

These pods fit the SKE 30K Pro Max device only. Pick up the SKE 30K Pro Max Kit at Pirate Vapes if you need the device.

About SKE Vape

SKE made its name with the Crystal Bar, which became one of the UK's top-selling vapes before single-use devices were banned in June 2025. The brand's strength has always been flavour clarity: clean nic salt recipes with distinct, well-separated tasting notes rather than blended sweetness. Post-ban, SKE pivoted to rechargeable prefilled systems and now runs several product lines under the Crystal name, from the compact Bar 600 Pro up to the 30K Pro Max at the top of the range.

All SKE Products stocked by UK retailers sit on the MHRA Notified Products List and meet TPD requirements. The 30K Pro Max refill pods carry the same V2 nic salt recipe from the Crystal range that earned the brand its following, so the flavour quality you remember from the Crystal Bar days carries forward into this format.

Stock Up and Save

Pods are a consumable. If you vape daily, you will go through a pack every one to two weeks, so buying ahead saves you from gaps between orders. Orders over £25 qualify for Free Delivery at Pirate Vapes, and anything placed before 4pm ships same day. Picking up multiple packs in one go through our Value Bundles drops your cost per pack further.

If you would rather not think about reordering at all, Auto Refill delivers your chosen flavour on a schedule you control, with a discount on every shipment. We carry every single and dual edition in the 30K Pro Max pod range.

Conclusion

These pods do one job and they do it well: they keep your 30K Pro Max running with fresh coils and full containers, pack after pack. The auto-refill system means flavour stays consistent right to the end of each 15,000-puff run, and the sealed pod design removes any need for maintenance, coil swaps, or loose e-liquid bottles. With 20 flavour options across single and dual editions, you can settle on a favourite or rotate through the range without ever needing a second device.

If you do not own the device yet, pick up the SKE 30K Pro Max kit to get started. Otherwise, browse the full pod range and find your next flavour.

FAQs

How many puffs do the 30K Pro Max replacement tanks give you? 

Each pack delivers up to 30,000 puffs total, split across two pod-and-container units at approximately 15,000 each. 

What comes inside a refill pod pack? 

Four pieces total. You get two pods (1.8ml, mesh coil fitted) and two containers (8.2ml) that clip together to form two complete refill units. That adds up to 20ml of e-liquid per pack.

Can I refill these pods with my own e-liquid?

They are sealed units. The e-liquid and coil are factory-fitted. Once the container empties, dispose of the spent pod and replace the whole unit.

What is the difference between the same-flavour and dual edition? 

Same-flavour packs contain two pods of the same flavour, giving you 30,000 puffs on one taste. Dual editions pair two different flavours at 15,000 puffs each, designed for the twist-to-switch mouthpiece.

Will these pods fit other SKE devices?

The form factor is exclusive to the 30K Pro Max. Trying to insert these into a Crystal 600 Pro, CL6000, or Bar 15K will not work physically.