Smok Acro Pod Vape Kit

Smok Acro Pod Vape Kit

A 0.69-inch OLED screen and 25W of adjustable power in a body 11.2mm thick. The Smok Acro Pod Vape Kit puts mod-style control into one of the slimmest pod systems around. A 1000mAh zinc alloy chassis handles a full day, wattage runs from 5W to 25W on the display, and the 2ml side-fill pods carry an integrated 0.8ohm mesh coil for a smooth MTL draw. Two pods come in the box.

It reads the pod on the fly and suits both new vapers and anyone after a pocketable second device, sitting well among our Refillable Vape Kits and slimmer MTL Kits.

Why vapers choose this:

• A real screen on a pod this thin: the 0.69-inch OLED shows wattage, resistance and battery at a glance, so you are tuning the vape with information rather than guessing, which almost nothing else this slim offers.

• 5W to 25W of adjustable power for warmer or cooler draws.

• Integrated 0.8ohm mesh pods mean no coil changes: when the flavour fades, you swap the whole pod, and you are done.

• 11.2mm thin. It disappears in a pocket.

• Dual firing lets you inhale to fire or press the button, whichever you prefer.

Smok Acro Features

The Screen Does the Heavy Lifting

The 0.69-inch OLED is the Acro's signature. Two buttons under it set the wattage anywhere from 5W to 25W, and the display keeps battery level, coil resistance and voltage in view. On a device barely over a centimetre thick, that level of feedback is unusual, and it makes finding your sweet spot far less of a guessing game.

No Coil Changes, Ever

Each 2ml pod has its 0.8ohm mesh coil built in. There is nothing to unscrew or press-fit. When the taste starts to dull after a week or two, you drop in a fresh pod and carry on. It is the low-maintenance route: less fiddling, no gunked-up coils, no dry-hit surprises from a badly seated head.

Fill It From the Side

Filling is a side job. Lift the silicone stopper, slot in your bottle, top up the 2ml reservoir and press the plug home. Translucent windows either side of the mouthpiece let you keep an eye on the level. It pairs best with Nicotine Salts or a 50/50 Blends at higher PG.

Airflow on a Slider

A slider tunes the draw from a tight MTL pull to a slightly airier one. It moves smoothly but holds its position, so it will not drift in your pocket mid-session. Small control, but it is the difference between a cigarette-style draw and something a touch more open.

Smart Enough to Keep Up

Pod detection reads the coil the moment you click a pod in and sets a sensible level, while an eight-second cut-off, short-circuit and low-voltage protection quietly handle safety. You get the feel of a bigger mod without any of the menu-diving.

Smok Acro Colours

Six finishes are stocked, spanning plain metals and a couple of two-tone fades. Every colour runs the same hardware, so choose on looks alone.

#buttons

• Black
• Blue Purple
• Cyan Pink
• Grey
• Red Gold
• Silver

How to Set Up the Smok Acro

Two minutes, no tools.

1. Charge it up. Give the Acro a full charge over USB-C. It takes about 90 minutes from flat to full before the first vape.

2. Fill the pod. Pull the silicone stopper on the side of the pod, add your e-liquid to just below the window line, and press the stopper firmly shut.

3. Seat the pod. Push the pod down until the magnets grab, and it clicks into place, lined up with the airflow.

4. Wet the wick properly. Stand the filled kit on its base and leave it a good eight to ten minutes so the mesh soaks right through. New pods drink slowly, and this step is what saves you from a burnt first draw.

5. Set your power. Use the two buttons to pick a wattage. Start near 12W on the 0.8ohm pod, then nudge it up or down to taste.

6. Draw or fire. Inhale for auto-draw, or hold the button. Take it easy on the first few pulls and let the flavour build.

What's in the Smok Acro Box

Every kit includes:

• the Acro device,

• two 2ml pods with the 0.8ohm mesh coil built in,

• a USB-C charging cable

• and the user manual.

There is no e-liquid in the box, so pick up a bottle to match, and no mains adapter, though the cable works with any standard USB port or plug.

Pods Made for the Acro

The Acro uses its own 0.8ohm mesh pods, and because the coil is sealed inside, there are no separate coils to buy. Two ship with the kit, and when the flavour dulls, you simply fit a fresh one, which you'll find in our Replacement Vape Pods section and stocked at Pirate Vapes.

Pods from other SMOK devices are shaped differently and will not seat in the Acro, so stick to genuine Acro pods for a proper magnetic fit and a leak-free seal.

About SMOK

SMOK has been one of the biggest names in vaping since 2010, best known for its high-power mods and the TFV tank series that defined sub-ohm clouds for years.

The Acro shows the other side of the brand: taking the control features vapers loved on those bigger kits, the adjustable wattage and the clear OLED readout, and shrinking them into a pod system you can forget is in your pocket. It is SMOK doing restraint rather than raw power, and it works.

Stock Up and Save

The pod is the only thing you will replace, and each one lasts a week or two of steady use, so grabbing a spare pack keeps you covered without a second thought.

Order from Pirate Vapes before 4 pm and it ships the same day in padded packaging that protects the screen in transit. All stock is TPD compliant, checkout is age-verified, and sales are over-18s only.

Conclusion

The Smok Acro is a compact MTL pod kit with one standout trick: a proper OLED screen and adjustable wattage in a body barely over a centimetre thick. Integrated 0.8ohm mesh pods keep maintenance to nothing, the airflow slider covers different draw styles, and the 1000mAh battery sees out a day.

If you want mod-style control without the bulk, it is a smart, pocketable pick. Browse the wider SMOK Vape Range and the full Vape Accessories Range, or explore the rest of the collection at Pirate Vapes.

FAQs

Does the Acro have a screen?

Yes. A 0.69-inch OLED shows wattage, coil resistance, battery level and voltage, which is unusual on a pod kit this thin.

Do I need to change coils in the Acro?

No. The 0.8ohm mesh coil is built into each 2ml pod. This is the only resistance produced for the Acro, keeping your choices simple.

What wattage should I use in the Acro?

Around 12W suits the 0.8ohm pod, with the full range running 5W to 25W. Adjust to taste using the two buttons under the screen.

What e-liquid works best in the Acro Pod Kit?

50/50 or higher-PG blends. Nic salt at 10mg or 20mg gives a satisfying MTL hit, which is what the tight airflow and mesh pod are built for.

How do I refill the Acro Pod?

Open the side-fill stopper, fill the 2ml pod, and press it shut. Leave a new pod to soak before vaping.

Is the Acro Pod Kit good for beginners?

Yes. Auto-draw firing, pod detection, and no coil changes make it simple, while the screen and wattage control give room to experiment later.