SMOK Fetch Pro Replacement Pods

SMOK Fetch Pro Replacement Pods

Two pod formats for one device, sold as a 3-pack of empty refillable pods for the SMOK Fetch Pro. The RPM pod takes SMOK's RPM coil family for MTL and restricted draws. The RGC pod runs the RGC coil range for sub-ohm DTL. Both fill from the side through a silicone-stoppered port, both carry an adjustable airflow ring, and both clip to the mod on magnets.

Coils are not included, so you choose the resistance to match how you vape. Genuine SMOK spares to keep a Fetch Pro alive. Browse the wider Vape Pods range too.

Why vapers choose this:

• Two draw styles from one kit, because the RPM pod handles MTL while the RGC pod goes full sub-ohm DTL, so a single Fetch Pro can do both without you owning a second device.

• Side fill with a silicone stopper. Top up without pulling the pod off the mod.

• An airflow ring on the pod itself, which most replacement pods at this price quietly skip.

• Magnetic click-in. No fiddly alignment.

• A 3-pack of genuine spares so a leak or a worn seal never puts the device out of action for long.

Fetch Pro Pod Features

Pick Your Pod, Pick Your Draw

The RPM pod is the MTL and restricted-lung side of the Fetch Pro, taking the full RPM coil family down to tighter, cigarette-style draws. The RGC pod is the sub-ohm half, built around the 0.17ohm conical mesh for warm DTL clouds. Same device, two personalities, depending on which pod is loaded. Grab spare Vape Coils to suit whichever you run.

Side Fill Beats the Old Way

Refilling is a side job here. Ease the silicone stopper out of the flank of the pod, drip your e-liquid in, push it back. The pod stays on the mod the whole time, so there is no unclipping, no drips down the battery door, no mess on your hands. Quick and clean enough to do at your desk.

Why Adjustable Airflow Matters

Most replacement pods give you one fixed draw, and that is that. These do not. The airflow ring lets you widen it for a looser DTL pull or bring it in for a tighter MTL draw, so the same pod shifts with your mood or your coil. Small thing, real difference day to day.

Built for High VG on the RGC Side

The RGC pod on a 0.17ohm mesh coil wants thick juice. High-VG is the move. A 70/30 shortfill wicks properly and holds its flavour from 40W upward, where a thin blend would dry out and taste scorched. Pair it with a High VG E-Liquid and the RGC side does what it was built to do.

Magnets, Not Guesswork

The pod drops onto the Fetch Pro and holds on magnets. No threading, no lining up a pin by feel. It seats the same way every time and pulls off cleanly when you swap. That magnetic contact keeps the connection steady while the airflow ring does its job at the base.

Fetch Pro Pod Options

Three options in the picker. Choose by coil family first, then capacity.

#buttons

• RGC Pod (2ml)
• RGC Pod (4ml)
• RPM Pod (4ml)

The 2ml pod is the TPD-capacity choice. The 4ml pods simply hold more between refills.

How to Set Up the Fetch Pro Pod

Coil first, then fill. Five minutes, most of it soaking.

1. Take your chosen RPM or RGC coil and press it firmly into the base of the pod until it seats. Plug and play, no threading.

2. Prime it with five or six drops of e-liquid straight onto the exposed coil cotton through the base.

3. Open the silicone side stopper and fill the pod, keeping clear of the central airflow tube.

4. Push the stopper back in fully and wipe any excess off the base.

5. Clip the pod onto the Fetch Pro and let it stand for a good seven minutes so the wick saturates before your first pull.

6. Start low, around 15W on an RPM coil or 40W on the RGC mesh, then build up toward the coil's rating.

What's in the Fetch Pro Pod Box

Each pack has three empty Fetch Pro pods in your chosen type and capacity. That is all. No coils, no e-liquid, no device. You will need a compatible RPM or RGC coil and your own juice to get going, and the pods only make sense if you already own the Fetch Pro. Pirate Vapes stocks the coils separately.

Made for the SMOK Fetch Pro and Its Coil Families

These pods are built for the SMOK Fetch Pro, the box-style pod mod that sits between simple pods and full Vape Mods. The RPM pod accepts the RPM coil range: the 0.4ohm mesh for warmer MTL, the higher-ohm heads for tighter draws, and the RPM RBA if you rebuild.

The RGC pod takes the RGC range, led by the 0.17ohm conical mesh for sub-ohm DTL, with an MTL and an RBA option alongside. What will not work: Nord coils do not fit either pod, and these pods do not drop into the smaller Fetch Mini. Match the coil to the pod, never across families.

About SMOK

SMOK built the Fetch Pro around its RPM and RGC coil platforms, the same plug-and-play system running across the Nord and RPM series. That cross-compatibility is the whole idea: one coil ecosystem covering everything from tight MTL to sub-ohm clouds, so a single brand of spares can feed a shelf of SMOK devices.

The Fetch Pro pods sit in that ecosystem as the refillable, coil-swappable option rather than a sealed cartridge. Browse the rest of the SMOK Coils and hardware to match your setup.

Stock Up and Save

Pods wear out well before devices do, so a spare 3-pack in the drawer saves a dead night when one starts to taste off or weeps at the seal. Since coils sell separately, it is worth grabbing a few of those at the same time.

Every order from Pirate Vapes ships age-verified, over-18s only, with all stock TPD compliant. Free Pirate Post lands on orders over £40.

Conclusion

The Fetch Pro pods are the simple way to keep a two-style setup running: RPM for MTL, RGC for clouds, both refillable and both coil-swappable. Buy the pod type that matches how you vape, add the right coil, and you are sorted.

They only suit the Fetch Pro, so double-check that it is your device before ordering. Pick up spare pods, coils, and Vape Accessories together at Pirate Vapes.

FAQs

Do Fetch Pro Pod pods come with coils?

No. They are empty pods, sold in threes. You will need an RPM or RGC coil to match, bought separately.

Which Fetch Pro pod do I need, RPM or RGC?

RPM for MTL and tighter draws. RGC for sub-ohm DTL clouds. It comes down to the coil family you want to run.

Do Fetch Pro Pods fit the Fetch Mini?

No. The Fetch Mini uses its own pods.

What e-liquid works best with Fetch Pro Pods?

RPM pods suit 50/50 and nic salts for MTL. RGC pods want high-VG, around 70/30, for sub-ohm DTL.

How long does a Fetch Pro pod last?

Weeks, not days, since the pod outlives the coil. Swap it when it leaks, cracks, or the flavour muddies even with a fresh coil fitted.

Can one Fetch Pro pod take both coil types?

No. RPM coils only fit the RPM pod, and RGC coils only fit the RGC pod. Keep them matched.