SMOK LP2 Series Coils

SMOK LP2 Series Coils

Three resistances, two draw styles, one pod platform. The SMOK LP2 coils are the replacement heads built for the SMOK RPM 4 and the LP2 pods it runs, covering everything from a tight mouth-to-lung pull to open direct-lung clouds.

The 0.6ohm dual coil handles MTL at 15-25W. The 0.23ohm and 0.4ohm mesh heads open things up for direct-lung vaping. Each one is a press-fit drop-in, sealed with a triple silicone ring so liquid stays put. Sold as a pack of 5. When flavour drops off, fresh Replacement Vape Coils bring it straight back.

Why vapers choose this:

• One coil family covers both draws. Run the 0.6ohm dual coil for a cigarette-style MTL pull, then swap to a mesh head when you fancy warmer, cloudier direct-lung sessions, all in the same RPM 4 pod.

• A triple silicone O-ring seal keeps liquid off the battery contacts and out of the airflow.

• Press-fit fitting means no threads to cross and no fiddly alignment. Push it in and go.

• Mesh heats wide. Sharper flavour, faster ramp-up.

• Five heads to a pack covers most vapers for a solid month of daily use.

SMOK LP2 Features

An Upgrade on the LP1, Not a Reinvention

The LP2 keeps the leak-focused structure of the older LP1 and reworks the internal heating so the cotton saturates more evenly. Same familiar press-fit system, better wicking, cleaner flavour towards the end of a coil's life. If you moved up from the LP1, everything about fitting these will feel identical.

Mesh or Dual Coil, Which One?

The two mesh heads (0.23ohm and 0.4ohm) are your direct-lung options, best paired with thicker High VG E-Liquid for warm vapour. The 0.6ohm runs a dual coil build for a tighter MTL draw. Different jobs, same pod. Worth owning a couple of each, honestly, so you can switch on a whim.

That Triple Ring Seal

Three silicone rings wrap the body of each coil and press tight against the pod wall. Leaking pods waste liquid and gum up the airflow, so the seal earns its place. It is a small detail that quietly saves you a mess in your pocket.

Press It In, and You Are Done

No screwing, no threading. Line the coil up with the base of the LP2 pod and push until it clicks home. The whole swap takes under a minute once you have done it once, which suits anyone who would rather vape than tinker.

Cotton That Actually Gets Wet

The mesh sits over a cotton bed shaped to pull liquid through from several points at once. Full saturation is the difference between clean flavour and a burnt first puff, so priming matters here. Give it a moment before you fire and the coil pays you back with a longer life.

SMOK LP2 Resistance Options

Three heads, split across two vaping styles. Your choice comes down to whether you want a tight throat hit or a bigger, warmer cloud.

Reach for the 0.23ohm mesh first if you vape direct-lung. It is the head that ships inside the RPM 4 kit; it runs happily across 20-45W, and it turns higher-VG juice into dense, flavourful vapour. This is the popular pick for a reason.

Prefer a mouth-to-lung pull closer to a cigarette? The 0.6ohm dual coil is your head. It sits at 15-25W, suits 50/50 liquids and Nic Salts at 10mg or 20mg, and gives ex-smokers the tighter draw they tend to want.

Sitting between the two, the 0.4ohm mesh trades some of the 0.23's cloud for a slightly more restricted direct-lung feel at around 25W. A sensible middle ground if the 0.23 feels too airy and the 0.6 feels too tight.

#buttons

• DC 0.6 Ohm
• Mesh 0.4 Ohm
• Meshed DL 0.23 Ohm

How to Fit the SMOK LP2 Coil

Quick job. Under two minutes start to finish.

1. Pull the spent coil out of the LP2 pod and dispose of it.

2. Drip three or four drops of e-liquid straight onto the exposed cotton around the sides of the new coil.

3. Press the fresh coil firmly into the base of the pod until it seats with a click.

4. Refill the pod with your chosen e-liquid and close the fill port.

5. Stand the filled pod upright and leave it for a full six minutes so the cotton drinks all the way through before its first fire.

6. Start at the low end of the wattage range and step up gradually until the draw feels right.

What's in the SMOK LP2 Coil Pack

Five LP2 coils in the single resistance you select at checkout. That is the lot. No pod, no device, and no e-liquid are included, so keep a spare pod and a bottle of juice handy if you are running low.

Built Around the RPM 4 and the LP2 Pod

These heads are made for the LP2 pod system, and the SMOK RPM 4 is the device most people run them in. They also drop into other SMOK pods engineered for the LP2 platform, including the Nord 50W and the G-Priv and G-Priv Pro pods that accept LP2 coils.

Pirate Vapes stocks the range in all three resistances so you can match the head to your pod. If you are still choosing a device, the LP2 heads live inside SMOK's Refillable Pod Kits, and spare pods sit with the Replacement Pods.

What will not fit is anything outside the LP2 family. Not an RPM coil. Not an RPM 2 head. Not an RPM 3 slot. Each of those runs a different platform, so check that the coil currently in your pod reads LP2 before you order.

About SMOK

SMOK has been building pod hardware in Shenzhen since 2010, and the LP coil line is its answer to the leaking that plagued early pod systems. The LP1 introduced the sealed, press-fit head. The LP2 refined it with better wicking and a broader wattage spread, which is why it anchors the RPM 4 and sits across a run of the brand's MTL Vape Kits and pod systems.

It is a coil range built for reliability rather than novelty, and for a daily pod vaper that is exactly the point. Browse SMOK's MTL Vape Kits if you are pairing coils to a new device.

Stock Up and Save

Coils are a running cost, not a one-off, and the maths is simple: one head lasts a week or two, so a pack of 5 covers most of a month and a couple of packs keep you off the back foot entirely. Set them on The Crow's Nest auto-refill, and they arrive before you run dry.

Every order from Pirate Vapes ships same day before 4 pm in padded packaging, with an age-verified checkout and over-18s only. All stock is TPD compliant. Free Pirate Post on orders over £40.

Conclusion

The SMOK LP2 range is a straightforward, dependable way to keep an RPM 4 performing, with a resistance for every draw style and a leak-proof seal that holds up in daily use.

Pick the 0.23ohm for clouds, the 0.6ohm for a tighter MTL hit, or keep both in the drawer and switch as the mood takes you. Stock a five-pack, pair them with the right Vape Accessories, and order from Pirate Vapes for same-day dispatch.

FAQs

Which pods do the LP2 coils fit?

The LP2 pod is used by the SMOK RPM 4, plus other SMOK pods built for the LP2 platform such as the Nord 50W and G-Priv pods. Always confirm your pod is an LP2 pod.

What is the difference between the mesh and DC heads?

The mesh heads (0.23ohm and 0.4ohm) are for direct-lung clouds. The 0.6ohm dual coil is for a tighter mouth-to-lung draw.

Can I use nic salts with the LP2?

Yes, and the 0.6ohm is the head to do it with. Its 15-25W MTL range suits 10mg or 20mg salts and 50/50 liquids. The mesh heads are better with higher-VG juice.

Do LP2 coils fit the RPM 2 or RPM 3?

No. Different pod, different coil platform.

How long does an LP2 coil last?

Roughly one to two weeks with daily use. Sweeter, darker liquids caramelise on the cotton faster and will cut that shorter.

What wattage suits the 0.23ohm head?

It runs across 20-45W. Start near the bottom, then climb until the flavour and vapour sit where you want them.