SMOK Vape Pen Replacement Coils

SMOK Vape Pen Replacement Coils

Direct-to-lung coils built for one job: keeping a SMOK Vape Pen running strong. The SMOK Vape Pen Replacement Coils are sub-ohm replacement coils for the Vape Pen 22 and Vape Pen V2 kits, sold in a pack of 5. The headline option is the 0.15ohm mesh, a low-resistance build that heats fast across a wide surface for dense vapour and full flavour.

These are cloud coils, plain and simple, made for high-VG liquid and a warm, airy draw. Pick your resistance, prime it, drop it in. Browse the wider Vape Coils range if you need a different fitment.

Why vapers choose this:

• The 0.15ohm mesh is the star. A wide, flat heating surface ramps up quickly and wicks efficiently, which translates to dense vapour and a fuller flavour than an old-style round-wire coil could manage.

• Made to match the Vape Pen. These are engineered for the Vape Pen 22 and V2, so fitment is exact, and there is no guesswork.

• Press-fit swaps drop straight into the base of the tank. No threading.

• Organic cotton wicking keeps the taste clean from a fresh coil.

• Five to a pack, which matters because sub-ohm coils get worked hard and need changing more often than a high-resistance MTL head.

SMOK Vape Pen Replacement Coils Features

Why the 0.15ohm Mesh Is the One to Beat

Mesh changed sub-ohm coils. Instead of a coiled wire with hot and cold spots, a mesh strip heats evenly across its whole surface. On the 0.15ohm Vape Pen coil, that means a faster ramp-up, a cooler-running wick that resists dry burning, and vapour that comes thick and flavourful. If clouds are the point of your Vape Pen, this is the coil that delivers them.

Built Specifically for the Vape Pen

This is the part that matters most with any coil: fitment. These heads are made for the SMOK Vape Pen 22 and the Vape Pen V2 tank, so they seat correctly and seal properly every time. No adapters, no forcing, no leaks from a coil that nearly fits. Match the coil to your device, and it just works.

High-VG Liquid Is the Right Fuel

Sub-ohm coils want thicker juice. Run 70/30 or higher-VG e-liquid through these, and the wicking keeps up, the flavour stays rich, and the coil lasts longer. Thin 50/50 or nic salt liquid floods a low-resistance coil and can cause spitback, so save those for a mouth-to-lung setup. Pair these with a proper cloud liquid, and you will see the difference.

A Press-Fit Swap in Under a Minute

No threading, no cross-threading, no fiddling with tiny screw fittings. The coil pushes straight into the base of the tank and seats with a click. Pull the old one out, press the fresh one in, prime, done. Honestly, it is about as simple as coil changes get, which is exactly what you want from a starter-friendly kit like the Vape Pen. Explore the full Vape Kits range if you need a compatible device.

Organic Cotton Doing the Quiet Work

The wicking is organic cotton, and it earns its keep. Cotton pulls liquid to the mesh at a steady rate and burns clean, so the flavour stays honest from the first pull to the last. Prime it properly and it rewards you with a longer, tastier coil life.

SMOK Vape Pen Replacement Coils Resistance Options

The store picker is the source of truth for exactly which resistances are in stock, so check the variant selector before you order. 

#buttons

• 0.15 Ohm 15 Pen 22 Strip Coil
• 0.15 Ohm Mesh Coil
• 0.25 Ohm Pen 22 Coil
• 0.4 Ohm X4 Coil
• 0.6 Ohm DC Coil

How to Set Up the SMOK Vape Pen Replacement Coils

Quick swap. A minute, start to finish.

1. Empty and detach the tank from the battery, then unscrew the base to reach the old coil.

2. Pull the spent coil straight out of the base. It press-fits, so it lifts away without threading.

3. Drip four or five drops of e-liquid onto the exposed cotton and into the wicking ports of the fresh coil.

4. Press the new coil firmly into the base until it seats flush, then reassemble the tank and fill with high-VG e-liquid.

5. Stand the filled tank upright and wait ten minutes so the cotton saturates fully before the first pull. Skip this, and you scorch the wick on the first fire.

6. Start at the lower end of the wattage range and step up gradually until the vapour and flavour feel right.

What's in the SMOK Vape Pen Replacement Coils Box

Five Vape Pen coils in your selected resistance, and nothing else. No tank, no device, no e-liquid. These are replacements for vapers who already own a SMOK Vape Pen kit and need fresh heads to bring the flavour and vapour back to full strength.

Made for the SMOK Vape Pen 22 and Vape Pen V2

These coils are built for the SMOK Vape Pen 22 and the Vape Pen V2 tank, seating directly into the base on both. If your device is one of those and the current coil presses in from the bottom, you are in the right place.

What they will not do is fit SMOK's pod-based systems. The Nord, the RPM series, the Novo and the TFV tanks all run on entirely separate coil platforms, so a Vape Pen coil is not a substitute for any of them. Check your kit takes the Vape Pen fitment before ordering.

About SMOK

SMOK, made by Shenzhen IVPS, is one of the most recognised names in vaping and a genuine pioneer of sub-ohm hardware, having introduced some of the first triple and quad-core coils on the market. The Vape Pen line is SMOK's take on a simple, pen-shaped sub-ohm starter: one button, a straightforward tank, and coils engineered for cloud production without the complexity of an advanced mod.

The mesh coil platform behind it is a scaled-down version of the same technology SMOK runs across its bigger TFV tanks, which is why a device this simple can still put out serious vapour.

Stock Up and Save

Sub-ohm coils are a running cost. Worked hard on high-VG juice, a single pack of 5 does not last as long as you would like, so keeping a spare pack in the drawer saves the mid-week scramble when the flavour drops off.

Every order from Pirate Vapes ships the same day when placed before 4 pm, packed to survive the post. All stock is TPD compliant, sold through an age-verified checkout to over-18s only.

Conclusion

The SMOK Vape Pen coils are the straightforward way to keep a Vape Pen 22 or V2 performing at its best. The 0.15ohm mesh is the pick for most, fast to heat and generous with vapour, and the press-fit swap takes seconds.

Match the resistance to your draw, run high-VG liquid, and prime it properly. Browse the rest of our replacement coils and Vape Accessories, or head back to Pirate Vapes for the full range.

FAQs

Which kits do the Vape Pen coils fit?

The SMOK Vape Pen 22 and the Vape Pen V2 tank. They press into the base of the tank on both. They will not fit Nord, RPM, Novo, or TFV pods and tanks, which use different coils.

What resistance should I choose for the Vape Pen coils?

The 0.15ohm mesh for most people. It is the go-to for direct-lung clouds and strong flavour on high-VG juice. Higher-resistance builds in the range give a slightly different draw, so check what is in stock.

What e-liquid works best with the Vape Pen coils?

High-VG, 70/30 and above. These are sub-ohm coils, so thin 50/50 or nic salt liquid can flood them and cause spitback. Save those for an MTL device.

How long does one Vape Pen coil last?

Usually one to three weeks with regular use. Sweeter, darker liquids gunk the coil faster and shorten that. Priming properly stretches it.

Are the Vape Pen coils genuine SMOK coils?

Yes. Every coil sold here is a genuine SMOK Vape Pen head, TPD compliant and sold to over-18s only.

Can I use nic salts in the Vape Pen coils?

Not recommended. Nic salts pair with tight, higher-resistance MTL coils. In a sub-ohm Vape Pen coil, 20mg salt on a direct-lung draw is harsh and unpleasant. Stick to lower-strength high-VG liquid.