Strawberry Punch Al Fakher Hypermax Prime 50K Prefilled Pod Kit

Strawberry Punch Al Fakher Hypermax Prime 50K Prefilled Pod Kit

The Strawberry Punch Al Fakher Hypermax Prime 50K Prefilled Pod Kit pairs a 2ml pod module, which holds a 0.6ohm mesh coil, with two sealed 10ml containers of nicotine salt at 20mg/ml. A 1000mAh rechargeable battery runs the kit, and each set is rated to reach up to 50,000 puffs, with fewer on longer draws.

The one flavour, Strawberry Punch, is offered across 3 pack sizes. Adjustable airflow covers draws from restricted direct-to-lung (RDL) to direct-to-lung (DTL), and heating begins on the inhale, so no button is fitted. Empty containers are swapped for a Hypermax Prime 50K refill pack, and the battery stays in use.

What to Know About the Strawberry Punch Hypermax Prime 50K Kit

• Puff ceiling of up to 50,000 for one set, lower on long draws
• 2 x 10ml Strawberry Punch containers feeding a 2ml pod module
• Nicotine salt at 20mg/ml, paired with a 0.6ohm mesh coil
• RDL to DTL airflow, started by the inhale
• Takes Hypermax Prime 50K refill packs only, not 30K or Crown Bar

Features of Strawberry Punch Al Fakher Hypermax Prime 50K Prefilled Pod Kit

Five features, from the puff rating to the draw controls, set this kit apart. As the containers are sealed, nothing is poured by hand, and the kit sits among the other Prefilled Pod Kits in the store.

Up to 50,000 Puffs per Set

Al Fakher puts the maximum for one set of containers at 50,000 puffs, an up-to figure that only short, tight draws approach. Longer pulls drain the containers sooner, so totals differ between users. The battery sits outside that rating and carries over to later sets. Other high-capacity hardware is listed under Big Puff Vapes.

Snap Dual Mesh Module

The 2ml module of the Snap Dual system carries the Big Cloud v2.0 mesh coil, rated at 0.6ohm, so no separate coil has to be sourced, installed, or primed. Liquid travels from the two 10ml containers to the coil under a Flow Sense regulation system. A new module is supplied with each refill pack, which renews the coil along with the e-liquid.

Strawberry Punch Flavour

Both containers hold Strawberry Punch, a candied strawberry blend in a sweet fruit-punch style with tropical citrus notes. Strength is 20mg/ml in nicotine salt form, and the taste stays the same through the whole set. Another Hypermax Prime flavour can be fitted to the same battery at refill time.

1000mAh USB-C Battery

A 1000mAh rechargeable battery sits in the base, with USB-C charging and Quick Charge 2.0 support. A Silk Glow LED screen shows the battery percentage and pod status. Charging needs a lead, and none is supplied, so one from Chargers And Cables can be added to the order.

Draw Activation and Adjustable Airflow

The kit fires through an internal airflow switch when air is drawn through the mouthpiece, which is a plain tip and not a button. A mechanical slide switch on the battery unit sets the airflow, from a restricted RDL draw to an open DTL one. No other setting needs changing.

How to Set Up the Strawberry Punch Hypermax Prime Kit

Setup involves no e-liquid handling and no priming drops. The containers join the module first, and the module is then docked into the battery.

Step 1: Peel the protective silicone bungs and seals off the battery, the Snap Dual module, and both Strawberry Punch containers.

Step 2: Push the two 10ml containers into the tracks of the module until they click flush.

Step 3: Dock the assembled module into the battery housing.

Step 4: Keep the kit upright for 2 to 3 minutes, which gives the e-liquid time to saturate the mesh coil.

Step 5: Set the airflow slide switch to the preferred draw, then inhale. The mouthpiece is not pressed, and nothing else is needed to start the kit.

Step 6: When the Silk Glow screen shows a low charge, use the USB-C port to recharge. The cable is sold separately.

What's in the Strawberry Punch Hypermax Prime 50K Kit Box

Four items are packed with each kit, and the larger packs repeat that set.

• 1 x 1000mAh rechargeable battery
• 1 x pod module from the Snap Dual system, mesh coil included
• 2 x 10ml containers prefilled with Strawberry Punch
• 1 x user manual

Charging cables are sold separately from the kit, and refill packs must be ordered on their own.

Refill Packs Compatible With the Strawberry Punch Hypermax Prime Kit

This kit is exclusively compatible with Hypermax Prime 50K refill packs. Each pack supplies a new Snap Dual module, two 10ml containers, and a Strawberry Punch pack is the like-for-like swap. Other flavours go onto the Hypermax Prime vape just the same, and the full set is found under Replacement Pods.

The kit is not backwards-compatible with Hypermax 30K or Crown Bar systems, so the Prime 50K name should be matched exactly when a refill pack is chosen. Refills come as sealed packs, so no bottled liquid is poured in.

About Al Fakher and the Snap Dual Platform

The Hypermax Prime 50K is the 50,000-puff model in Al Fakher's Hypermax line. Its main change from the 30K Hypermax is the chassis, where two 10ml containers dock into a wider Snap Dual module in place of the single-cartridge port used by the 30K series.

The module is renewed with every refill pack, and one battery is kept across many sets of the Al Fakher 50 K vape. Strawberry Punch is one of the flavours offered as both a kit and a refill pack. Kits from other brands with similar ratings are stocked in Big Puff Pod Kits.

Stock Up on the Strawberry Punch Hypermax Prime Kit

Five or ten kits in one order means five or ten batteries, each wanting its own USB-C lead. A weekday order made by 3:30 pm is dispatched with Royal Mail Tracked 24 on that same day; at weekends and on bank holidays, Pirate Vapes dispatches on the next working day instead.

Age is verified at checkout, and only over-18s can complete a purchase. Quantity offers on other lines can be browsed in Multi-Buy Vapes.

Conclusion

Adults wanting a fruit-flavoured prefilled kit with no button and a long puff rating will find it in the Strawberry Punch Hypermax Prime 50K kit, which also takes any Hypermax Prime 50K refill pack. A USB-C lead, bought separately, recharges the battery.

More devices to compare are listed under Rechargeable Vapes and Vape Kits, and refills, liquids and pouches are stocked across Pirate Vapes.

FAQs

How many puffs does the Strawberry Punch Al Fakher Hypermax Prime 50K Prefilled Pod Kit give?

The maximum rating is 50,000 puffs per set of containers, an upper-limit figure that assumes short, tight draws. Fewer puffs result when pulls are long or hard, since the liquid is used faster.

What is in the box with the Strawberry Punch Hypermax Prime 50K kit?

Each kit contains a 1000mAh battery, a Snap Dual pod module holding the mesh coil, two 10ml containers of Strawberry Punch, plus a user manual. Charging leads and spare refills are not supplied.

Which refill packs fit the Al Fakher Strawberry Punch vape?

Only Hypermax Prime 50K refill packs fit this kit, each with a new Snap Dual module and two 10ml containers. The pack can be Strawberry Punch for a like-for-like swap or any other flavour from the range, while Hypermax 30K and Crown Bar parts do not fit.

Does the Strawberry Punch Hypermax Prime vape have a button?

No button is fitted to this kit. Heating begins on the inhale, and a slide switch on the battery unit sets the airflow between RDL and DTL.

How is the Strawberry Punch Hypermax Prime 50K kit charged?

The USB-C port accepts Quick Charge 2.0, and the cable is sold separately. The 1000mAh battery stays in place when a refill pack is fitted, so the same cell is recharged across many sets.

What is the difference between Pack Of 1, Pack Of 5 and Pack Of 10 for the Strawberry Punch 50K kit?

Only the quantity changes between the options, and every option is Strawberry Punch. Each kit in the larger packs is complete, with its own battery, module, and pair of containers.