Vaporesso Orca Tank Replacement Glass

One piece of Pyrex glass and a set of O-rings. That is the entire product, and if you need it, nothing else will do. The Vaporesso Orca Tank replacement glass fits the Orca Solo and Orca Solo Plus tanks, two of Vaporesso's compact pen-style MTL Tanks built for tight-draw, mouth-to-lung vaping.

Pyrex rather than standard glass, which means better heat resistance and a cleaner taste over time. The O-rings come pre-included so the seal stays tight after the swap. One tube per pack. Over 18s only.

Why vapers choose this:

• Genuine Vaporesso part with O-rings included, so the seal matches factory spec and you are not hunting for spare gaskets

• Pyrex construction tolerates heat cycling without cracking, which matters on any tank that gets daily use

• Direct fit for the Orca Solo and Orca Solo Plus with no modification or trimming needed

• Clear glass lets you monitor liquid levels at a glance, so you refill before the wick runs dry

• Cheap insurance against the one accident that puts your tank out of action entirely

Vaporesso Orca Tank Replacement Glass Features

Why Pyrex and Not Just Any Glass

Standard borosilicate glass cracks under thermal stress. Pyrex handles it. The Orca Solo runs at low wattage, so heat build-up is modest, but even modest temperature shifts over hundreds of sessions stress cheap glass. Pyrex gives you a tube that lasts until you physically drop it or knock it against something hard. And when that happens, you want a replacement ready, not a trip to find one.

The O-Rings Do More Than You Think

Two silicone O-rings sit between the glass and the tank's top and bottom hardware. They create the seal that stops liquid from leaking out of the tank body. Old, compressed, or missing O-rings are the single most common cause of tank leaks that people blame on the coil. Fresh O-rings with fresh glass eliminate that variable completely. Worth remembering.

A Clear View of Your Liquid Level

Sounds obvious. It is obvious. But a scratched, cloudy, or stained glass tube makes it genuinely harder to judge how much liquid remains in your Vape Tank. Running a coil dry ruins it permanently. A clean, new Pyrex section restores full visibility and keeps your coils alive longer as a result.

Sized for the Orca Solo Range Only

This glass tube is precision-moulded for the Orca Solo and Orca Solo Plus dimensions. It will not fit Vaporesso's other tanks: not the XROS pods, not the iTank, not the Sky Solo, not the VM range. Those each have their own glass specifications with different diameters and heights. If you own an Orca Solo or Orca Solo Plus, this is correct. Anything else from Vaporesso requires a different part number.

One Spare Changes Everything

Glass is the most fragile component on any tank-based setup. One knock against a table edge, one drop onto a hard floor, and the tank is unusable until you replace it. Having a spare tube at home means you are back vaping in under five minutes instead of waiting for a delivery. Practically speaking, that is the entire value proposition of this product.

How to Replace the Vaporesso Orca Tank Glass

Quick job. Three minutes if you take your time.

1. Empty your tank of any remaining e-liquid. Pour it back into the bottle or into another container. Do not attempt a glass swap with liquid still inside.

2. Unscrew the tank base from the top hardware. The Orca Solo separates into two threaded sections with the glass tube sitting between them.

3. Slide the old glass off carefully. If it is cracked, wrap it in tissue first to avoid cutting yourself. Remove the old O-rings from the metal sections and discard them.

4. Seat the new O-rings onto the grooves on the top and bottom metal hardware. Press them in gently until they sit flush.

5. Slide the new Pyrex tube over the base section, then screw the top hardware back on. Finger-tight only. Overtightening risks cracking the new glass before you even use it.

6. Refill with e-liquid and let the coil re-saturate for three to four minutes before taking a draw. Even if the coil was already primed, the disruption from disassembly can introduce small air pockets into the wicking material.

What's in the Vaporesso Orca Tank Replacement Glass Box

One Pyrex glass tube and O-ring seals for the Orca Solo or Orca Solo Plus tank. No coil, no tank base, no drip tip, no e-liquid. Just the glass and the seals needed to install it.

The Right Glass for Vaporesso's Orca Solo Pen Devices

The Orca Solo and Orca Solo Plus are pen-style MTL kits from Vaporesso. Compact, lightweight, and built around a traditional tank-and-coil design rather than a sealed pod system. That traditional design means the glass tube is a user-serviceable part, and this replacement is the one that fits.

Not compatible with any of Vaporesso's pod-based devices (XROS, Luxe X, ECO Nano). Not compatible with Vaporesso's sub-ohm tanks (iTank, NRG-S, Sky Solo Plus). Those use entirely different glass dimensions. If you are unsure which tank you own, check the engraving on the tank base or the name printed on the original box.

About Vaporesso

The Orca Solo was one of Vaporesso's earlier pen-style MTL Devices, designed as a straightforward entry point for vapers who wanted a refillable tank without the complexity of adjustable wattage or swappable coil platforms. Vaporesso built it on the same manufacturing quality that runs through the GTX coil range and the XROS pod series. 

While the Orca line is no longer the newest product in the catalogue, the replacement parts remain in production, and the tanks themselves continue to perform for vapers who prefer a simple, reliable pen setup. Browse the full Vaporesso Range for kits, coils, and accessories.

Stock Up and Save

Glass breaks once. You only need a spare once. But once is enough to put your tank out of service for days if you do not have a replacement on hand. Grab one now and keep it in a drawer.

Every order from Pirate Vapes ships the same day before 4 pm in padded packaging designed to protect fragile parts during transit. TPD-compliant stock, age-verified checkout, over 18s only. Free Pirate Post on orders over £25.

Conclusion

The Vaporesso Orca Tank replacement glass is a small, inexpensive part that solves a real problem. Pyrex construction, O-rings included, direct fit for the Orca Solo and Orca Solo Plus tanks.

No guesswork, no modification, no compatibility headaches. If your current glass is cracked, chipped, clouded, or you just want a backup before something goes wrong, this is the part. Pick it up alongside your next coil order at Pirate Vapes. Browse more Replacement Tank Glass and Vape Accessories while you are here.

FAQs

Which tanks does this glass fit?

The Vaporesso Orca Solo and Orca Solo Plus. Those two only. It will not fit the XROS, iTank, Sky Solo, NRG, or any other Vaporesso tank.

Does it come with O-rings?

Yes. Seals are included in the pack. Replace them at the same time as the glass for the best seal.

Is the glass Pyrex?

Pyrex, yes. Heat-resistant, more durable than standard borosilicate glass, and better at handling the thermal cycling that comes with daily vaping.

Can I use this on a sub-ohm tank?

No. The Orca Solo is a mouth-to-lung pen device. This glass is sized exclusively for that tank's dimensions. Sub-ohm tanks from Vaporesso use different glass parts with wider diameters.

How do I know if my glass needs replacing?

Cracks are obvious. Less obvious: a persistent leak that new coils and fresh O-rings do not fix. Hairline fractures in the glass can cause slow seepage that looks like a coil issue but is actually the tube itself.