Vaporesso VM Stick 18 Replacement Glass

Eighteen millimetres in diameter. That is all the glass you need to keep a VM Stick 18 running. This Pyrex replacement glass fits the VM Tank 18, the compact MTL tank that ships with Vaporesso's pen-style starter kit, and it holds 2ml of e-liquid under UK TPD limits. 

One tube per pack, supplied with fresh O-rings so the seal sits right when you fit it. If a crack, chip, or hard knock has put your tank out of action, this is the part that fixes it for the price of a coffee. Genuine Vaporesso glass, not a third-party imitation. Browse more Replacement Tank Glass across all major brands at Pirate Vapes.

Why vapers choose this:

• Genuine Vaporesso part that matches the VM Tank 18 exactly, so there is no guesswork on fitment or diameter

• Pyrex construction withstands coil heat and resists cracking better than regular glass, which matters on a tank this slim

• Includes fresh O-rings to replace the old seals at the same time, cutting down on potential leaks after the swap

• 2ml TPD-compliant capacity keeps everything legal and lets you monitor your liquid level clearly through the glass

• Under three quid. Cheaper than buying a whole new tank when a simple glass swap sorts the problem

Vaporesso VM Stick 18 Replacement Glass Features

Why Pyrex and Not Regular Glass?

Regular glass cracks under heat stress. Pyrex, which is borosilicate, expands and contracts less when temperature shifts between draws. On a tank as narrow as 18mm, the glass wall sits close to the coil, so heat tolerance actually matters here. It is not a marketing label on this product. It is a functional choice.

Those O-Rings Do More Than You Think

The included O-rings create the seal between the glass and the metal sections of the tank. Old O-rings compress, dry out, and eventually leak. Replacing them at the same time as the glass means you are not chasing a slow drip two weeks later because you reused worn rubber. Small detail, big difference in day-to-day use.

Clear View of Your Liquid Level

The whole point of a glass tank section is visibility. A scratched or clouded tube makes it harder to tell when you are running low, and vaping a dry coil because you could not see the level is an easy way to burn out an EUC coil permanently. Fresh glass keeps that level visible from any angle.

Sized for One Tank. That Is the Point.

This glass fits the VM Tank 18 and nothing else in the Vaporesso range. Not the VM 22, not the VM 25, not the Veco, not the iTank. The 18mm diameter is specific to this model. If you are unsure which tank you own, check the base of the device or the original box for the model number before ordering.

A Five-Minute Fix

Cracked glass does not mean a dead kit. The VM Tank 18 disassembles without tools. Unscrew, swap the tube, replace the O-rings, reassemble, fill. The whole process takes less time than reading about it. Your VM Stick 18 is back in service the same day the glass arrives.

How to Replace the Vaporesso VM Stick 18 Glass

Quick job. No tools required.

1. Empty any remaining e-liquid from the tank. Tipping it upside down over a tissue works if you cannot vape through the last of it.

2. Unscrew the base of the VM Tank 18 from the glass section by turning anticlockwise. The coil will stay attached to the base.

3. Slide the old glass tube off the top chimney section. Careful if it is cracked, since fragments can be sharp.

4. Remove the old O-rings from both the top chimney and the base. Wipe both metal surfaces clean with a dry cloth.

5. Fit the new O-rings from the pack onto the chimney and base grooves. Press them into the grooves firmly so they sit flat without twisting.

6. Slide the new Pyrex tube over the chimney, then screw the base back on until finger-tight. Fill with e-liquid, let it sit for three to four minutes if you have also fitted a fresh coil, and you are good to go.

What's in the Vaporesso VM Stick 18 Replacement Glass Box

One Pyrex glass tube and a set of replacement O-rings. No coil, no tank base, no drip tip, no e-liquid. Just the glass and seals you need for the swap.

The Right Glass for Vaporesso's Pen-Style MTL Tank

The VM Tank 18 sits exclusively on the Vaporesso VM Stick 18 kit. That pen-style device uses a 510 thread connection, a 1200mAh battery, and runs two coil options: the EUC CCELL 1.0ohm for nic salts and the EUC Meshed 0.6ohm for freebase e-liquid. Both coils operate at low wattage between 10W and 22W, and the narrow 18mm tank diameter means this glass is not interchangeable with wider Vaporesso tanks.

What does not fit: the VM 22 Tank, the VM 25 Tank, any Veco model, the Sky Solo, the NRG-S, or any of Vaporesso's pod systems. Each uses a different diameter and O-ring profile. Check the full Vaporesso Range if you need glass for a different model.

About Vaporesso

The VM Stick 18 was Vaporesso's answer to a specific gap in their lineup: a slim, affordable, pen-style MTL device for people transitioning from cigarettes. While most of the brand's attention goes to the XROS pod series and the GTX coil platform, the VM Stick line carved out a following among vapers who wanted a simple one-button device with a proper glass tank and adjustable airflow. 

The OMNI Board chipset inside the VM Stick 18 handles safety protections and consistent power delivery at a price point well below Vaporesso's flagship kits. Keeping a spare glass on hand is the cheapest way to extend the life of a device that still does exactly what it was built for. Browse Vaporesso Coils if yours need replacing at the same time.

Stock Up and Save

Glass breaks. That is the nature of carrying a tank in a pocket or bag. Picking up a spare while you are ordering means the next crack does not leave you without a device for days. Pair the glass with a fresh pack of EUC coils and a bottle of nic salts to cover the basics in one order. 

Every order from Pirate Vapes ships same day before 4 pm in padded packaging designed to protect fragile parts like this. TPD-compliant stock, age-verified checkout, over 18s only. Spend over £25 and delivery is free with Free Pirate Post.

Conclusion

The VM Stick 18 replacement glass is a simple, inexpensive fix for a cracked or damaged tank. Genuine Vaporesso Pyrex, correct 18mm diameter, fresh O-rings included, and a swap that takes five minutes with no tools.

If your VM Stick 18 is still running well and only the glass needs replacing, this is the part. No reason to buy a whole new kit. Find more Vape Accessories and vape kits at Pirate Vapes.

FAQs

Does this glass fit the VM 22 or VM 25 tank?

No. The VM Stick 18 glass is 18mm in diameter and only fits the VM Tank 18. The VM 22 and VM 25 tanks use wider glass tubes with different O-ring profiles.

What capacity does the Vaporesso replacement glass hold?

2ml, which is the UK TPD maximum for nicotine-containing e-liquid tanks.

Do I need to replace the O-rings every time I change the glass?

Not strictly required if the existing O-rings are still soft and intact. But the pack includes fresh ones, and fitting them takes seconds. Worth doing.

Can I use VM Stick 18 glass with any coil in the VM Tank 18?

Yes. The glass does not interact with the coil directly. It works with both the EUC CCELL 1.0ohm and the EUC Meshed 0.6ohm heads.

Will cracked glass cause the tank to leak?

Almost certainly. Even a hairline crack compromises the seal, and e-liquid will seep through within hours. Replace cracked glass immediately to avoid liquid reaching the battery contacts.