Vaporesso XROS Pro 2 Vape Kit

Vaporesso XROS Pro 2 Vape Kit

Consistent flavour from a full battery right down to the last few percent, backed by one of the biggest batteries in its class. The Vaporesso XROS Pro 2 pairs a 2000mAh battery with Super Pulse mode, which holds your chosen power steady as the battery drains so the draw does not fade through the day.

It runs 5W to 30W, uses Vaporesso's new Corex 3.0 mesh pods, and charges over USB-C in around half an hour. With adjustable airflow covering MTL and restricted DTL, it is one of the more capable Refillable Pod Kits at this price. As a proper reusable, Rechargeable Vape, it is a strong everyday choice.

Why vapers choose this:

• Super Pulse mode keeps flavour and vapour steady as the battery drains, which is the single biggest weakness of most compact pod kits sorted.

• 2000mAh battery is large for a device this size and comfortably lasts a full day.

• Corex 3.0 mesh pods deliver clean, rich flavour.

• 5W to 30W with a TFT screen gives real control across MTL and restricted DTL.

• Fast USB-C charging gets you back to full in roughly 30 minutes.

Vaporesso XROS Pro 2 Features

Flavour That Holds All Day

Super Pulse mode trims the power delivery on the fly so the draw at 20% battery feels the same as it did at full charge. That steady output is the difference between a kit that tastes great for the first few hours and one that stays consistent right through to the recharge. For flavour chasers, it is a genuinely useful upgrade.

Corex 3.0 Mesh for Cleaner Taste

The pods use Vaporesso's latest Corex 3.0 mesh, a honeycomb-style coil that increases the heating surface against the wick. In practice, that means richer, cleaner flavour and smoother airflow than the previous generation. The coil is built into the pod, so when flavour eventually fades you simply swap the whole pod for a fresh one.

Big Battery, Fast Charging

The 2000mAh cell is large for such a compact device and easily covers a full day for most vapers, with lighter users stretching it further. When it does run down, 2A USB-C charging brings it back to full in around half an hour. Eco mode is on hand too, trimming the output slightly to squeeze out extra runtime when you need it.

Set the Draw, Set the Power

The adjustable airflow slider takes you from a tight, cigarette-like mouth-to-lung pull to a warmer restricted direct-lung draw, and the 0.96-inch TFT screen shows wattage, resistance, battery and puff count at a glance. Smart mode reads the pod and suggests a safe power range, so it stays easy for newcomers while still giving experienced vapers full control. It handles MTL as happily as most dedicated MTL Vape Kits.

Match Your Juice to the Pod

Higher-resistance XROS pods suit a tight MTL draw and pair best with nic salts, so reach for nic salts at 10mg or 20mg. The lower-resistance 0.4 ohm pod opens up for RDL vaping and prefers thicker, higher-VG blends, so pair that with high VG e-liquids at a lower strength.

Vaporesso XROS Pro 2 Colours

Seven finishes, from understated blacks and metallics to brighter tones, all on the same lightweight magnesium alloy body. Start with Glittering Black if you want the most understated everyday look.

#buttons

• Best Colour
• Dawn Purple
• Gem Green
• Glittering Black
• Glittering Gold
• Glittering Silver
• Moonlit Pink
• Storm Blue

Vaporesso XROS Pro 2 Pods and Resistances

The kit includes two Corex 3.0 pods to cover both main styles: a 0.6 ohm pod for traditional MTL and a 0.4 ohm pod for restricted direct-lung. Both are 2ml, top-fill and leak-resistant.

Beyond the two in the box, the XROS Pro 2 takes the full XROS pod range, so you can fit higher-resistance pods for an even tighter MTL draw. As a rough guide:

• 0.4 ohm: restricted DTL, warmer and airier, best with higher-VG juice

• 0.6 ohm: standard MTL, a balanced everyday draw

• Higher resistances (0.8 ohm and up): tighter MTL, ideal for stronger nic salts

Match higher resistances to salts and a tight draw, and lower resistances to high-VG juice and more vapour.

How to Set Up the Vaporesso XROS Pro 2

Fill, prime, vape. A couple of minutes.

1. Charge the device fully over USB-C first.

2. Snap off the mouthpiece. You do not need to remove the pod from the device. Just push the flat side of the black mouthpiece to snap it off and reveal the fill port.

3. Fill with your e-liquid. Push your bottle tip through the red silicone valve, fill the pod, and snap the mouthpiece back on until it sits flush.

4. Leave it to prime for 3 to 5 minutes so the Corex 3.0 coil soaks up the liquid.

5. Power on and set. Press the fire button five times to switch on. Press three times to adjust your wattage (when using the 0.4 ohm pod) or cycle through the power modes (on higher-resistance pods).

6. Draw or press to fire, and set the side airflow to taste.

What's in the Vaporesso XROS Pro 2 Box

The kit includes:

• The XROS Pro 2 device,

• two Corex 3.0 pods (a 0.6 ohm and a 0.4 ohm),

• a USB-C charging cable,

• and a user manual.

There is no e-liquid included, so you will need a bottle of juice to get started. Every kit from Pirate Vapes ships age-verified.

Compatible With the XROS Pod Range

The XROS Pro 2 works with all XROS series pods, which is a big part of the appeal. That shared pod system spans a run of XROS devices, so replacements are easy to find, and you can switch resistance and vaping style without buying a new device.

When you need spares, look for XROS-compatible Replacement Pods rather than assuming another brand's pod will fit. Always match the XROS pod name on the packaging.

About Vaporesso

Vaporesso is one of the most trusted names in UK vaping, and the XROS line is its flagship pod series. The range built its reputation on reliable pods, clean flavour and steady generational upgrades, and it remains one of the most recommended pod platforms for MTL vapers.

The XROS Pro 2 sits at the top of that family, adding a bigger battery, the new Corex 3.0 coil and Super Pulse mode while keeping the wide pod compatibility the range is known for. Browse the full Vaporesso Range for matching pods and kits.

Stock Up and Save

A pod kit runs best when you keep spare pods and juice on hand, so you are never caught with a tired pod and no backup. Pirate Vapes dispatches orders placed before 4 pm the same day, and our Multi-Buy Deals help you save when you stock up on pods and e-liquid together.

Regular vapers can lock in repeat savings through The Crow's Nest. TPD compliant. Age-verified checkout. Over-18s only.

Conclusion

The Vaporesso XROS Pro 2 is one of the most complete compact pod kits going. You get a large 2000mAh battery, 5W to 30W with a clear TFT screen, fast USB-C charging, the new Corex 3.0 mesh pods and, crucially, Super Pulse mode to keep flavour consistent all day. Two pods in the box cover both MTL and RDL, and full XROS pod compatibility keeps it flexible and cheap to run.

It is an easy device to recommend to new and experienced vapers alike. Pick one up, along with your other Vape Accessories and Free Pirate Post over £40, at Pirate Vapes.

FAQs

What is Super Pulse mode in the XROS Pro 2 Vape Kit?

It keeps the power output steady as the battery drains, so flavour and vapour stay consistent instead of fading as the charge drops. It is the standout feature on this kit.

What pods does the XROS Pro 2 Vape Kit use?

The XROS series pods with built-in Corex 3.0 mesh coils. It ships with a 0.6 ohm MTL pod and a 0.4 ohm RDL pod, and takes the wider XROS pod range.

How is the XROS Pro 2 Vape Kit charged, and how long does it take?

Over USB-C with 2A fast charging. A full charge takes roughly 30 minutes.

Can the XROS Pro 2 Vape Kit do both MTL and RDL?

Yes. The adjustable airflow and choice of pod resistances let you set a tight mouth-to-lung draw or a looser restricted direct-lung one.

How much e-liquid does the XROS Pro 2 Vape Kit pod hold?

The UK pod holds 2ml, which keeps it TPD compliant. It is a top-fill design, so refilling is quick and mess-free.

What e-liquid should I use in the XROS Pro 2 Vape Kit?

Nic salts suit the higher-resistance MTL pods. Thicker, higher-VG blends at a lower strength suit the 0.4 ohm RDL pod.