VooPoo Argus Klyc Pod Kit

VooPoo Argus Klyc Pod Kit

The VooPoo Argus Klyc Pod Kit is a refillable device powered by a 1350mAh battery. A 2ml pod, filled from the top, carries the 0.7ohm coil, and output between 5W and 30W is set by the chip without any input.

The kit joins the Refillable Pod Kits range in 6 colours. The kit is activated by inhaling, as there is no fire button. A side airflow slider moves the draw from tight mouth-to-lung to loose restricted direct-to-lung, and the pod is replaced as a whole once the coil wears out.

What to Know About the Argus Klyc Pod Kit

• Rated at 1350mAh, with USB-C recharging
• 2ml top-fill pod with a 0.7ohm coil included
• 5W to 30W output, adjusted automatically by the chip
• Draw-activated, with an adjustable side airflow slider
• Takes ARGUS pods in 0.4ohm, 0.7ohm and 1.0ohm, and is sold without e-liquid

Features of VooPoo Argus Klyc Pod Kit

Power, pod, and body are kept simple on this kit, and everything below is built into the device. It is a rechargeable pod system from the Rechargeable Vapes range, so no separate battery is needed.

1350mAh Battery and USB-C Charging

The Argus Klyc 1350mAh battery recharges through a USB-C port rated at 5V/1.2A, and a full charge takes about 40 minutes. A status display indicates the charge level: red at 20% or lower, white above it. Charging can start straight after unpacking, since a cable comes with the kit.

GENE AI 2.0 Chip and Adaptive Power

Output from 5W to 30W is handled by the GENE AI 2.0 chip. It is matched to the fitted pod at 18W to 30W for 0.4ohm, 14W to 18W for 0.7ohm, and 10W to 14W for 1.0ohm. Three power levels follow the strength of each draw. No wattage buttons or menus are needed, because the adjustment is automatic.

ARGUS Top Fill Pod V2

Each pod holds 2ml for the UK and is filled through a port on top. The coil inside uses iCOSM CODE 2.0 technology, which VooPoo pairs with a Liquid-Seal Shield to resist leaks. The 0.7ohm pod in the box accepts nic salt as well as freebase liquid, and its body is PCTG.

Magnetic Cap and Airflow Slider

A magnetic cap snaps over the mouthpiece between uses and keeps pocket lint and dust out. When removed, it clips onto the base of the device, which stops it from going missing in a bag. A side slider opens or closes the airflow, pulling the draw towards mouth-to-lung or towards restricted direct-to-lung.

Aluminium Alloy Body

Aluminium alloy forms the body, which measures 100.6 by 29.7 by 17.2mm, weighs about 70 g, and slips into a pocket easily. Six finishes share the same hardware, so the colour choice changes the look of the kit and nothing else.

Argus Klyc Pod Kit Colours

Six finishes are available, all with the same pod and the same battery.

#buttons

• Black & Gold
• Dreamy Blue
• Dusty Pink
• Moss Green
• Mystic Grey
• Red & Gold

How to Set Up the Argus Klyc Pod Kit

Preparing the kit is quick, though the filled pod needs a rest before use. The device itself has no settings to change.

Step 1: Pull the magnetic cap away from the mouthpiece and check that the pod sits fully in the body.

Step 2: Lift the top port of the pod and pour in e-liquid slowly, avoiding the central airflow tube. Nic salt from the Nic Salts range suits the 0.7ohm pod well.

Step 3: Seal the port, then let the pod rest until the coil is soaked through. Vaping before that risks a burnt taste.

Step 4: Plug the cable into the USB-C port when the indicator is red, and leave it until the battery is full.

Step 5: Slide the side control to the airflow you want, then take a gentle inhale and the kit fires on its own. Keep the first few puffs short.

Step 6: Replace the entire pod when flavour starts to fade. The coil lives inside the cartridge, so there is no separate part to change.

What's in the Argus Klyc Pod Kit Box

Four items are packed with the device, and the pod is already matched to it.

• 1 x VooPoo Argus Klyc device
• 1 x ARGUS Top Fill Cartridge V2 (0.7ohm, 2ml)
• 1 x charging lead (USB-C)
• 1 x user manual

No e-liquid or spare pods are packed with the kit.

Pods That Fit the Argus Klyc Pod Kit

The Klyc works with all VooPoo ARGUS pod cartridges. Top Fill Cartridge V2 pods are made with built-in coils in 0.4ohm, 0.7 ohm, and 1.0ohm, and ARGUS Snap Cartridge and Top Fill Cartridge pods also fit. Supplied with a 2ml cartridge, the Argus Klyc UK edition follows the 2ml limit set for nicotine pods.

A pod that does not belong to the ARGUS family will not fit, whether it comes from another brand or from a different VooPoo system. Bare ITO coils cannot be pressed into the device directly, because they need the ARGUS empty cartridge to hold them. Argus Klyc pods in other resistances sit alongside the one in the box, so the draw can be changed without replacing the device.

Pirate Vapes lists spare cartridges in the VooPoo Vapes range alongside the rest of the brand.

About VooPoo and the ARGUS Pod Platform

VooPoo develops its own chip and coil technology, and the ARGUS platform is where the two meet. The Klyc pairs the GENE AI 2.0 chip with iCOSM CODE 2.0 coils, both named on its specification sheet.

Because the device takes cartridges from the ARGUS pod family, replacements are identified by that family name and by resistance. The platform is aimed at refillable pod users who want a simple, draw-activated kit rather than an adjustable mod, and the Klyc follows that approach closely.

Stock Up on the Argus Klyc Pod Kit

Spare 0.4ohm and 1.0ohm ARGUS pods are the natural additions to the basket, since the kit ships with a single 0.7ohm pod and the draw changes with each resistance. A bottle of nic salt completes the order, as the box contains no e-liquid.

Spending past £40 earns Free Pirate Post, while the Multi-Buy Vapes deals let several items share a saving. An age check at the Pirate Vapes checkout keeps sales limited to over-18s.

Conclusion

The VooPoo Argus Klyc suits vapers who want a draw-activated refillable kit with a 1350mAh battery and no settings to learn. It works with the full ARGUS pod family, so the draw can be changed by swapping the pod.

Other mouth-to-lung devices can be found in the MTL Vape Kits range, and pods and e-liquid are stocked at Pirate Vapes. No e-liquid is supplied, and this device is intended for adults aged 18 or over.

FAQs

Does the VooPoo Argus Klyc Pod Kit come with e-liquid?

Nothing to vape comes in the kit. Alongside the device sit a 0.7ohm ARGUS pod, a cable, and a manual, so nic salt or freebase e-liquid has to be purchased separately.

Which pods fit the Argus Klyc Pod Kit?

Pods from the ARGUS family are the ones to buy, including the Top Fill Cartridge V2 in 0.4ohm, 0.7 ohm, and 1.0ohm. Cartridges from other brands, or from VooPoo systems outside that family, do not fit.

How does the Argus Klyc Pod Kit fire?

The Klyc vape is activated by inhaling on the mouthpiece, and there is no fire button. Power is adjusted by the chip within a range of 5W to 30W, while the airflow is changed with the side slider.

How is the VooPoo Argus Klyc charged?

A USB-C port handles recharging at 5V/1.2A, which takes about 40 minutes. The supplied cable plugs straight in, and the status display turns red once the battery falls to 20% or below.

What is the magnetic cap on the Argus Klyc Pod Kit for?

The cap covers the mouthpiece to keep dust and pocket lint out and is held in place by a magnet. While the kit is being used, the cap can be parked on the base.

How many colours does the VooPoo Argus Klyc Pod Kit come in?

Six finishes are offered. The Argus Klyc colours are Black & Gold, Dreamy Blue, Dusty Pink, Moss Green, Mystic Grey, and Red & Gold, and the hardware is identical in each.