VooPoo Argus Pro 2 Vape Kit

VooPoo Argus Pro 2 Vape Kit

Eighty watts and a 3000mAh battery in a pod kit puts the Argus Pro 2 firmly at the powerful end of the pod world. This is a proper direct-to-lung device rather than a basic starter, built around VooPoo's GENE.TT 2.0 chip, the newer PnP X pod and coil platform, and a 0.96-inch TFT screen that shows everything at a glance.

It fills a 2ml pod, charges over Type-C, and runs three modes including a Turbo setting for an instant hit of extra vapour. For vapers who want clouds and flavour with real control, it sits among the more capable UK Pod Kits and refillable Vape Kits.

Why vapers choose this:

• Real power and battery in a pod-sized device, so you get sub-ohm clouds and a full day of use without carrying a big box mod.

• Three modes cover hands-off Smart, manual RBA wattage, and a Turbo burst.

• PnP X coils for strong flavour and a long coil life.

• Top airflow keeps condensation and leaks down.

• TFT screen and lock switch give you clear info and no pocket misfires.

VooPoo Argus Pro 2 Pod Vape Kit Features

Three Vaping Modes

The chip is the brain here, and it gives you three ways to vape. Smart mode reads the coil and sets a sensible power itself, which is ideal if you would rather not fiddle. RBA mode hands you full manual control across the 5W to 80W range. Turbo mode pushes a 25 percent jump in vapour in about a second when you want an instant bigger hit. Most people settle on Smart or RBA and dip into Turbo now and then.

PnP X Coil Platform

This kit runs VooPoo's PnP X coils, a newer range built for strong, lasting flavour. The kit includes a 0.15ohm mesh coil for higher-wattage clouds and a 0.3ohm for a slightly tighter draw, and the wider PnP X range adds other resistances for MTL or lighter DTL, where a Nic Salt can suit better. When a coil tires, you press a fresh one in. Keep spares from the VooPoo Coils range on hand.

Adjustable Top Airflow

The airflow sits at the top of the pod and adjusts by rotating it, taking you from a restricted lung draw right up to an open direct-lung pull. Putting the air inlet above the e-liquid, rather than at the base, is a deliberate move: it cuts down on the condensation and leaking that plague a lot of sub-ohm pods. A tidier device, in short.

0.96" TFT Display and Lock

The 0.96-inch TFT display shows your wattage, battery percentage, coil resistance, and puff count, so nothing is a guess. There is also a dynamic lock switch that physically locks the device, which means no accidental firing while it rattles around in a bag or pocket. Small touches, but they make daily carry easier.

Durable Zinc Alloy Build

The chassis mixes zinc alloy with a leather-effect finish, giving the Argus Pro 2 a solid, grippy feel with some weight behind it. There is an anti-slip pad on the base and a lanyard loop if you like to carry it on a cord. This is a device made to take everyday knocks rather than a delicate pocket pod.

VooPoo Argus Pro 2 Pod Vape Kit Colours

Seven finishes in the picker, from understated to bold, plus the store's own pick. Match it to your taste.

#buttons

• Cocoa Brown
• Lake Blue
• Modern Red
• Pearl White
• Sky Purple
• Space Grey
• Spray Black

How to Set Up the VooPoo Argus Pro 2 Pod Vape Kit

A few minutes, with a bit of patience for the sub-ohm coil.

1. Charge the device over Type-C before first use. The screen will show the battery level.

2. Pull the pod out of the device and press your chosen PnP X coil firmly into the base.

3. Prime the coil well: drip five or six drops of e-liquid directly onto the exposed cotton through the wicking holes, as these large sub-ohm mesh coils need plenty of liquid to start.

4. Lift the silicone plug located on the lower side of the pod and fill the 2ml reservoir with a higher-VG juice. Reseal the plug and click the pod back into the magnetic base.

5. Let the device stand upright for five to ten minutes to allow the thick e-liquid to fully saturate the cotton. Firing a dry sub-ohm coil will instantly ruin it.

6. Use the screen to set your mode and wattage, starting at the lower end of the coil's recommended range.

7. Press the fire button to vape, and twist the top airflow ring on the pod to adjust the draw to your taste.

What's in the VooPoo Argus Pro 2 Pod Vape Kit Box

• The Argus Pro 2 device,

• a 2ml PnP X pod fitted in place,

• a 0.15ohm PnP X coil pre-installed,

• a spare 0.3ohm PnP X coil,

• a USB Type-C cable,

• a platform card

• and a user manual.

No e-liquid is included, so you will need a bottle of higher-VG juice to get going. Extra PnP X coils and pods are sold separately.

Runs on the VooPoo PnP X Platform

The Argus Pro 2 uses VooPoo's PnP X pods and coils, which are shared with devices like the Drag S2. The kit comes with the DTL pod and two coils, and the wider PnP X coil range covers everything from a 0.15ohm cloud-chasing mesh up to higher-resistance heads for a tighter draw.

A separate PnP X MTL pod is also available if you want to run it as a mouth-to-lung device. Fresh Replacement Pods keep it going.

One important point: the PnP X range is not the same as VooPoo's older PnP coils. The original PnP heads will not fit here, so make sure any spares you buy are marked PnP X. Browse the Best Refillable Pod Kits if you want to compare it with other options.

About VooPoo

VooPoo is one of the biggest names in vaping, and its Argus and Drag ranges are among the most recognised devices on the market. The brand made its name on the GENE chipset, which is known for fast, accurate firing, and the Argus Pro 2 carries the latest GENE.TT 2.0 version.

Pair that with the newer PnP X coil platform, which VooPoo rates for long coil life and consistent flavour, and you have a device that leans on the parts of VooPoo's engineering that have earned it a following. It is a dependable, powerful pick from a brand with a strong track record in pod mods.

Stock Up and Save

A sub-ohm device gets through coils and juice faster than a small MTL pod, so it pays to keep spares in. Grab a few PnP X coils and a bottle or two of higher-VG 50ml Shortfill E-Liquid at the same time, so you are ready when the first coil fades.

Every order from Pirate Vapes ships same-day when placed before 4 pm, packed to keep the device safe in transit. All stock is TPD compliant, checkout is age-verified, and sales are strictly over-18s only.

Conclusion

The Argus Pro 2 is one of the more powerful pod kits around, and it makes a strong case for anyone who wants sub-ohm clouds and flavour without moving to a full mod.

A 3000mAh battery, 80W of adjustable power, three modes, and the PnP X coil platform give it real range and a proper day of battery life. For a confident DTL or RDL vaper, it is a genuine step up. Browse more Vape Accessories, or head back to Pirate Vapes to see the full range.

FAQs

Is the Argus Pro 2 suitable for beginners?

It can be, using Smart mode, but it is really aimed at direct-to-lung vapers who want power and clouds. If you want a tight, cigarette-style MTL vape, a smaller pod kit is a better starting point.

What coils does the Argus Pro 2 use?

VooPoo PnP X coils. The kit includes a 0.15ohm and a 0.3ohm, and the range offers more resistances. The older PnP coils are not compatible.

What e-liquid should I use with the Argus Pro 2?

A higher-VG blend, around 60 to 70 percent VG, suits the sub-ohm coils best. Because these are low-resistance DTL coils, use a lower nicotine strength rather than high-strength salts, which would be too harsh at this power.

What are the three modes of the Argus Pro 2?

Smart sets the power automatically, RBA lets you adjust the wattage yourself from 5W to 80W, and Turbo briefly boosts vapour by around 25 percent.

How big is the Argus Pro 2 battery?

3000mAh, which is large for a pod kit and easily lasts most vapers a full day. Type-C charging at 2A tops it up quickly.

Does the Argus Pro 2 leak?

The top airflow design is built to reduce leaks by keeping the air inlet above the e-liquid. As with any pod, avoid overfilling and reseat the coil properly if you see any seepage.