Voopoo Argus Replacement Pods

One pod shape. Every ARGUS device. Eight options. The Voopoo Argus replacement pods cover the full range from tight MTL to open RDL across three generations: original Top Fill, upgraded V2 Top Fill, and empty pods that take replaceable ITO coils.

Seven of the eight options have a mesh coil sealed inside so you replace the whole pod when flavour fades. The eighth is an empty shell that lets you swap just the coil and keep the pod. All are 2ml TPD, refillable, PCTG construction, and magnetic fit. Pirate Vapes stocks every variant. TPD compliant. Over 18s only.

Why vapers choose Voopoo Argus Replacement Pods:

• One pod fits every ARGUS device. Argus A, Argus P2, Argus G2, Argus G3, Argus Matrix, Argus P3. Buy once, use everywhere.

• Three generations available. Original Top Fill for the full resistance range including 1.2 ohm. V2 Top Fill for the upgraded leak-proof mesh with a 30-day seal. Empty pod for vapers who prefer swapping just the coil.

• V2 pods last significantly longer. Voopoo rates the V2 mesh at up to 90ml of e-liquid per coil, which translates to roughly 45 refills before the flavour drops off.

• Clear PCTG body shows your liquid level. No pulling the pod out to check. Glance at the device and you can see how much is left.

• Top-fill without removing the pod. Open the fill port while the pod sits in the device. Fill, close, vape. No drips, no mess, no fumbling.

Voopoo Argus Replacement Pods Features

V2 Top Fill with 30-Day Leak Seal

The V2 range uses Voopoo's upgraded liquid-seal system with golden cotton rated to 260°C. The seal keeps e-liquid locked inside the pod for up to 30 days even when standing idle. The mesh coil runs through more liquid before flavour fades compared to the original Top Fill. Available in 0.4, 0.7, and 1.0 ohm. If you can choose between original and V2, pick the V2.

Original Top Fill with 1.2Ω Option

The original Top Fill range covers your baseline resistances, including the specialized 1.2-ohm option that isn't available in the newer V2 build. The 1.2-ohm variant gives the tightest, most restricted mouth-to-lung draw in the entire ARGUS family, running smoothly at a cool 9–12W. Like the rest of the Top Fill selection, it lets you fill directly through the top-side rubber port while seated in the device, delivering solid mesh flavor and a classic cigarette-style throat hit. 

Empty Pod with Replaceable ITO Coils

The 2-pack empty pod takes Voopoo ITO coils instead of having a coil sealed inside. When the coil fades, you push the old one out and press a new one in. The pod itself gets reused across multiple coil changes. ITO coils are available in 0.5, 0.7, 1.0, and 1.2 ohm. Cheaper to run long-term than replacing entire pods with built-in coils.

Transparent PCTG Body

The ARGUS pods are built from tinted transparent material that lets you monitor your liquid level while the pod sits in the device. No need to pull anything out. When the liquid runs low or starts to darken, you know the coil is nearing the end of its life. 

Magnetic Connection Across Every ARGUS Device

Every pod clicks into the device via magnetic contacts. No threading, no twisting, no alignment. Pull the old one out, push the new one in. The magnets hold firm during pocket carry. The connection has not changed since the first ARGUS device launched, so pods bought years ago still fit the newest ARGUS kits.

Voopoo Argus Replacement Pods Resistances

Eight options across three pod generations. The V2 range is the latest, with upgraded mesh and leak-proof technology. The originals remain available for vapers who want the 1.2-ohm tight MTL option. 

V2 Top Fill (latest generation, recommended):

• 0.4 Ohm V2 Top Fill: Open RDL with visible cloud at 18-30W. Handles 70/30 VG

• 0.7 Ohm V2 Top Fill: The bestselling ARGUS pod. Firm MTL with nic salts at 14-18W

• 1.0 Ohm V2 Top Fill: Cool, tight MTL at 10-14W. Smooth with 20mg nic salt

Original Top Fill:

• 0.4 Ohm Top Fill: RDL option in the original generation. Warmer draw at 18-30W

• 0.7 Ohm Top Fill: Same resistance as V2 but original mesh. Solid MTL performer

• 1.0 Ohm Top Fill: Firm MTL in the original range. Clean with nic salts

• 1.2 Ohm Top Fill: The tightest, highly restricted at 9–12W. Easy top-side fill port 

Empty Pod:

• 2ml, 2 Pack (No Coil): Empty pod shell that accepts ITO replacement coils. Swap the coil, keep the pod

How to Set Up the Voopoo Argus Replacement Pods

1. Unpack. Take a fresh pod from the 3-pack (built-in coil) or 2-pack (empty).

2. Fill. For all Top Fill and V2 Top Fill pods: locate the silicone rubber flap on the upper side section of the cartridge, lift it open, and squeeze in your chosen e-liquid up to the 2ml line. Press the stopper back down firmly. 

3. Install a coil (empty pod only). If using the empty pod, push an ITO coil into the base until it clicks. Skip this step for pods with built-in coils.

4. Prime. Let the filled pod sit upright for five to ten minutes. The mesh coil needs time to soak. Skipping this risks a burnt first puff.

5. Remove the old pod. Pull the spent pod from your ARGUS device and discard (or keep the empty pod and just swap the coil).

6. Insert. Push the new pod into the device. The magnets click it into place. The screen shows the detected resistance.

7. Vape. Inhale to auto-draw or hold the fire button on your ARGUS device.

What's in the Voopoo Argus Replacement Pods Box

Built-in coil pods come in 3-packs. Three identical pods at your chosen resistance, each with a mesh coil already sealed inside. 2ml capacity. PCTG construction. No e-liquid, no device, no cable included.

Empty pods (no coil) come in 2-packs. Two pod shells with no coil installed. You need to buy ITO replacement coils separately and push one into each pod before filling. Same 2ml capacity, same PCTG body, same magnetic fit.

The Perfect Fit for Every ARGUS Pod Kit

ARGUS replacement pods fit every current ARGUS device through the same magnetic connection. The only exception is the Argus E40, which uses a different pod platform.

Confirmed compatible ARGUS devices:

• Argus A (1100mAh, 30W, the newest flagship)

• Argus P3 (1500mAh, 30W)

• Argus Matrix (1350mAh, 30W)

• Argus G3 and Argus G3 Mini

• Argus P2 (1100mAh, 30W)

• Argus G2 and Argus G2 Mini

• Argus Klyc

• Argus G (1000mAh, 25W)

• Argus P1 and Argus P1s

• Argus Z and Argus Z2

• Argus Pod (original, 800mAh, 20W)

Note: The 0.4-ohm pod needs a device capable of 18W or more. Some older ARGUS devices like the original Argus Pod (20W max) can run it, but only at the bottom of its recommended range.

About Voopoo

Voopoo launched in 2017 and the ARGUS pod platform has become one of the most widely used refillable systems in the UK. The decision to keep one universal pod shape across every ARGUS device is what keeps customers in the ecosystem: pods bought for any kit work in every other.

The V2 Top Fill upgrade brought longer coil life, improved leak resistance, and better flavour consistency without changing the pod dimensions. ITO replacement coils add a cost-saving option for vapers who prefer swapping coils over entire pods. Browse the full Voopoo Vapes collection at Pirate Vapes.

Stock Up and Save

Three pods to a pack. Each one lasts roughly a week, longer on the 1.0Ω if you go easy on it. A couple of packs keep your Argus sorted for the month. Check our Vape Deals for multi-buy savings. We send genuine VooPoo, packed carefully and dispatched tracked so nothing arrives loose. Checkout is age-verified with 18+ delivery, and every pod is the 2ml TPD size. Rather not reorder? The Crow's Nest sends them on a schedule with a saving.

Conclusion

Eight variants. Three generations. Fifteen compatible devices. One magnetic connection that has not changed since 2021.

The Voopoo Argus replacement pods give you the full range from 1.2-ohm tight MTL through to 0.4-ohm open RDL, with built-in coil convenience or replaceable ITO coil savings depending on how you prefer to vape.

 The 0.7-ohm V2 Top Fill is where most vapers land. Start there and branch out from Pirate Vapes when you know what suits your draw.

FAQs

What is the difference between Top Fill and V2 Top Fill? 

The V2 uses upgraded mesh and a liquid-seal system that Voopoo rates at 30 days leak-free and up to 90ml per coil. The original Top Fill is still a solid pod, but the V2 lasts longer and leaks less. The V2 does not come in 1.2 ohm though.

Do these fit my ARGUS device? 

If your device has "ARGUS" in the name and is NOT the Argus E40, yes. Every ARGUS pod fits every ARGUS device through the same magnetic connection.

Can I use nic salts? 

Yes. The 0.7, 1.0, and 1.2-ohm pods pair best with nic salts and 50/50 blends. The 0.4-ohm handles 50/50 and 70/30 VG for freebase at higher wattage.

How long does each pod last? 

1-2 weeks for most daily vapers. Sweet liquids shorten that. V2 pods last longer than originals. Voopoo rates V2 mesh at up to 90ml of e-liquid per coil.

How many come in a pack? 

Built-in coil pods: 3-pack.Empty pod: 2-pack. The empty pod does not include ITO coils. Those are sold separately.

Do I need to prime a new pod? 

Yes. Fill the pod, stand it upright for five to ten minutes, then vape. The mesh needs to soak. Skipping the prime can burn the cotton on the first draw.