VooPoo Argus Top-Fill V2 Pods - Pack Of 3

VooPoo Argus Top-Fill V2 Pods

Three pods in a pack, and one job: keep your Argus Mini running with fresh flavour. The VooPoo Argus Top-Fill V2 pods are refillable 2ml cartridges with a built-in mesh coil, and they drop straight into the Argus G3 Mini and Argus G2 Mini.

Pick from 0.4Ω, 0.7Ω, or 1.0Ω depending on whether you want a looser RDL draw or a tight MTL one. Top-fill through a rubber plug, magnetic fitment, and a clear window so you can see the level. Sensible refills for a kit you already own, and they sit alongside the rest of our refills and pods.

Why vapers choose these:

• Refillable, so the running cost drops fast. A 2ml pod you top up yourself works out far cheaper over a month than buying prefilled, especially once you settle on a Nic Salt you like.

• Three resistances in one range, covering everything from a tight MTL pull to a warmer RDL draw.

• Top-fill with a magnetic click. Fill from above, drop it in, done.

• You can see the level. The clear cartridge means no guessing when to refill.

• iCOSM CODE 2.0 mesh is built for cleaner, longer-lasting flavour across the pod's life.

VooPoo Argus Top-Fill V2 Pod Features

Refillable Beats Prefilled on Cost

This is the whole reason to run a refillable pod. You buy the pod once, then fill it with whatever 10ml bottle you fancy, which costs a fraction of buying sealed prefilled pods every few days. Over a month, the saving is not small, and you get any flavour you want rather than whatever the prefilled range happens to stock.

Which Resistance For Which Draw?

Short version: higher number, tighter draw. The 1.0Ω gives a cool, cigarette-like MTL pull. The 0.7Ω sits in the middle and flexes between MTL and light RDL. The 0.4Ω opens things up for a warmer, airier restricted direct-to-lung hit. Same pod shell, three fairly different experiences.

Top-Fill, No Mess

Lift the rubber plug on top, sit your bottle nozzle in, fill to just under the line, and press the plug back. The multi-layer leak-resistant build keeps condensation and stray liquid away from the airflow, so the pod stays clean in your pocket. Fair to say it is one of the tidier top-fill systems around.

Built-In Mesh, Not a Separate Coil

There is no fiddly coil to screw in here. The mesh sits inside the pod, which keeps the whole thing simple: no threading, no priming a bare coil, no cross-threading a tiny part. When it is spent, the pod goes, and a fresh one takes over.

VooPoo Argus Top-Fill V2 Pod Resistance Options

Three to choose from, and the right one depends on how you like to draw and which strength you vape. Most people getting a spare will match the 0.7Ω that shipped with their kit.

Most popular is the 0.7Ω. It is the all-rounder, happy with 10mg or 20mg nic salt, and it flexes between a firm MTL draw and a gentle RDL one at 14W to 18W. If you are not sure, start here.

For a tighter, cooler mouth-to-lung pull, the 1.0Ω runs lower at 10W to 14W and suits 20mg salts and heavier throat feel. This is the closest to a classic cigarette-style draw.

For clouds and a warmer restricted direct-to-lung hit, the 0.4Ω pushes up to around 18W to 30W and works best with lower-strength freebase or a 50/50 blend at 3mg to 6mg.

#buttons

• 0.4Ω
• 0.7Ω
• 1.0Ω

How to Fill the VooPoo Argus Top-Fill V2 Pods

Two minutes, and the wait at the end matters most.

1. Take the pod out of the device.

2. Lift the top-fill plug and add your e-liquid, stopping just under the max line.

3. Seat the plug back down firmly so nothing weeps out.

4. Drop the pod back in. The magnetic connection pulls it into place.

5. Now the bit people skip: stand it upright for a good ten minutes so the mesh soaks right through before you fire it.

6. Take three or four gentle pulls to draw liquid into the wick, then vape as normal.

What's in the VooPoo Argus Top-Fill V2 Pod Pack

Three Argus Top-Fill V2 pods in the resistance you select, each with its mesh coil already built in. No e-liquid, no device, and no charging cable. Just the pods, ready to fill. Pirate Vapes keeps all three resistances stocked, so it is easy to grab a spare set in a different ohm if you want to switch up your draw.

Made for the Argus Mini Range

These pods use the Argus Top-Fill V2 cartridge standard, which is what the current Argus Mini kits run on. Confirmed fit for the Argus G3 Mini and the Argus G2 Mini, so if you own either, these are the correct refills. Grab a kit from our Refillable Pod Kits if you are building a spare setup.

What they will not fit: older Argus pods built on a different cartridge, and pods from other brands. If your current pod says Argus Top-Fill V2 on it, you are in the right place. Keep a rotation going with a set of Replacement Pods so you always have a fresh one to hand.

About VooPoo

VooPoo's Argus pods are built around iCOSM CODE 2.0, the mesh technology the brand uses to stretch coil life and hold flavour steady as a pod ages. The Top-Fill V2 cartridge is the shared standard across the current Argus Mini line, which is the point of it: one pod platform means your refills stay consistent and easy to find rather than changing with every new device.

That same thinking runs through the wider VooPoo Coil Range, where cross-device compatibility keeps replacements simple.

Stock Up and Save

A refillable setup only pays off if you keep spares in the drawer. Grab a pack in each resistance, and you can switch between a tight MTL draw and a warmer RDL one whenever the mood changes, without waiting on a delivery.

Bundle a few through our Plunder Packs and the per-pack price drops further. Every order from Pirate Vapes is age-verified at checkout, over 18s only, and TPD compliant, with Free Pirate Post on orders over £40.

Conclusion

The VooPoo Argus Top-Fill V2 pods are the straightforward, cheaper way to keep an Argus G3 Mini or G2 Mini running.

Three resistances cover MTL through to RDL, the built-in mesh keeps things simple, and top-filling takes seconds. If you own the kit, these are the refills to buy. Browse the full VooPoo Pods and matching Vaping Accessories at Pirate Vapes.

FAQs

Which devices do the V2 pods fit?

The Argus G3 Mini and Argus G2 Mini. They use the Argus Top-Fill V2 cartridge, so any Mini on that platform takes them.

Do the V2 pods come pre-filled?

No. They are empty, refillable pods. You add your own e-liquid.

Which resistance should I pick?

For MTL with nic salts, the 0.7Ω or 1.0Ω. For a warmer RDL draw, the 0.4Ω with lower-strength freebase or 50/50.

How long does one V2 pod last?

Usually a week or two with daily use, or up to VooPoo's quoted 30 days. Sweeter liquids will shorten that as residue builds on the mesh.

Are the V2 pods 2ml or 3ml?

The UK version is 2ml to meet TPD rules. A larger 3ml cartridge exists in some overseas markets, but UK stock is the 2ml.

Can I run different V2 pod resistances in the same device?

Yes. Swap a 0.4Ω for a 1.0Ω whenever you like. The device reads the pod and adjusts on its own.