VooPoo Drag X Pro Mod Kit

VooPoo Drag X Pro Mod Kit

100W from a compact single-battery mod, running the newest GENE.FAN 3.0 chip and the TPP X Pod platform. The VooPoo Drag X Pro takes a single 18650 or 21700 external cell, fires from 5W up to 100W, and covers 0.1Ω to 3.0Ω resistance, so it handles everything from a tight MTL pull on a 1.0Ω regular coil to full sub-ohm cloud runs on a 0.15Ω mesh.

Two coils in the box: the TPP-DM2 0.2Ω and TPP-DM3 0.15Ω. Zinc alloy and leather build, one-touch power switch, USB-C fast charging at 2.5A, seven colours. Batteries sold separately.

Why vapers choose this:

• 100W from a single external cell with the new GENE.FAN 3.0 chip driving the output. Not a dual-battery brick, but hits like one.

• Both TPP and PnP coil compatibility. Two full VooPoo coil families work on one device.

• 360° airflow with a dedicated MTL option. True dual-style vaping from a single mod.

• One-touch on/off switch on the device. Faster than the traditional five-click every time you pick it up.

• Zinc alloy shell with leather panelling for the classic Drag look and feel. Weight and grip that a plastic mod cannot fake.

VooPoo Drag X Pro Features

GENE.FAN 3.0 Delivers Roughly 20% Better Performance

VooPoo's new chipset is the headline upgrade over the previous Drag X. The GENE.FAN 3.0 brings a claimed 20% overall performance lift versus the previous generation, which shows up in two ways in daily use. Ramp-up on the mesh coils is quicker off the button, and the output stays steadier across a long draw rather than dropping off as the battery drains. Combined with the 8.5V boost voltage for the initial hit, this is a mod that produces cloud on the first draw without needing to be primed.

TPP X Pod Runs the Whole TPP Coil Family

The TPP X Pod is a redesigned 2ml pod-style tank built specifically for the most powerful TPP coils. Drop in the TPP-DM3 0.15Ω at 80–100W for maximum cloud, the TPP-DM2 0.2Ω at 40–60W for balanced DTL, the TPP-DM1 0.15Ω at 60–80W as a middle ground, or the TPP-DM4 0.3Ω at 32–40W for a tighter half-DL. The tank swaps between them without needing new hardware, and VooPoo has confirmed a 510 base attachment for the TPP X pod as well.

PnP Coil Compatibility Opens Up MTL and Pouch-Style Vaping

Alongside TPP, the Drag X Pro also fires the entire PnP Coil Range through a compatible PnP pod (sold separately). That opens up options a lot of 100W mods leave on the table: the PnP-R1 0.8Ω and PnP-R2 1.0Ω regular coils for a proper tight MTL pull with 10–20mg nic salt, plus the PnP-VM3 and PnP-VM4 for restricted DTL. One mod, two coil ecosystems, dozens of resistance and draw combinations. Fair enough for a device at this price.

360° Airflow Control With A Genuine MTL Option

The airflow system pairs 360° infinite airflow with a bottom airflow inlet, which sounds like marketing until you actually feel the difference. Fully open, the draw is wide and cool for cloud runs. Closed down, the dedicated MTL air holes give a tight, cigarette-style draw that most 100W mods physically cannot produce because the coil chamber is too big. This one manages both from the same tank.

One-Touch Power Switch (When You Unlock It)

Traditional vape mods use a five-click to turn on and off. That still works here. But VooPoo added a dedicated one-touch on/off switch on the top of the device for faster power management. Worth knowing: the device ships in lock mode by default, so first-time use needs the standard five clicks. To activate the one-touch button, press "+" and "–" simultaneously to enter the switch interface and enable it. Small extra step, big time saver afterwards.

VooPoo Drag X Pro Colours

Seven colours in the store picker. The Drag X Pro leans on VooPoo's classic zinc alloy and leather aesthetic across every finish, so all seven feel premium in the hand.

#buttons

• Basalt Gray
• California Orange
• Classic Black
• Garda Blue
• Mystic Red
• Sahara Brown
• Sapphire Blue

How to Set Up the VooPoo Drag X Pro

1. Charge or insert your external battery. Slide the removable battery door and drop in a single 21700 or 18650 cell, watching the +/- markings. Batteries are sold separately.

2. Prime the coil. Take the fresh TPP-DM2 0.2Ω or TPP-DM3 0.15Ω coil, apply four to five drops of e-liquid directly onto the cotton wick ports around the coil head, then push it firmly into the base of the TPP X Pod.

3. Fill the pod tank. Open the top-fill port on the TPP X Pod. Fill with your chosen e-liquid to just below the max line. Close the port and slot the pod onto the mod.

4. Wait a full ten minutes before firing. DTL mesh coils need proper saturation. Skipping this step burns the wick straight through, and no amount of drip-priming later will bring it back.

5. Power on with five rapid clicks. Enter the wattage suited to the coil: 40–60W for the DM2, 80–100W for the DM3. Adjust airflow with the 360° ring.

6. Enable the one-touch switch (optional). Press "+" and "–" together to enter the switch menu and turn on the top on/off button for faster daily use.

What's in the VooPoo Drag X Pro Box

The box contains one Drag X Pro device, one TPP X Pod Tank (2ml, TPD compliant), one TPP-DM2 0.2Ω coil, one TPP-DM3 0.15Ω coil, a USB-C cable, a user manual, and the Gene Chip authenticity card. Note what is NOT in the box: no battery (18650 or 21700 sold separately), no e-liquid, and no charging plug. The USB-C cable works with any standard 5V phone plug or laptop port.

Compatible With The Full TPP And PnP Coil Range

The Drag X Pro is a dual-platform device. Through the included TPP X pod, it fires all TPP coils: DM1, DM2, DM3, DM4, covering resistances from 0.15Ω to 0.3Ω across a 32W to 100W range.

Swap to a PnP pod (sold separately), and the same mod accepts every PnP coil VooPoo has released: the VM series for DTL and half-DL, the R1 and R2 regular coils for MTL, and the PnP-RBA for anyone building their own coils. That is somewhere north of a dozen coil options from one mod. Browse the full range on the Voopoo Vapes collection.

About VooPoo

VooPoo is one of the more technically credible names in the mid-tier mod market, and the Drag line is where the brand's engineering shows up most clearly. The original Drag set the template for the zinc alloy and leather aesthetic that most competitors have since copied.

The Drag X Pro builds on that heritage with the new GENE.FAN 3.0 chipset, the redesigned TPP X Pod platform, and the dual TPP/PnP coil compatibility that no other single mod in this price range currently offers. VooPoo's chip and platform engineering is what keeps regulars in the Drag ecosystem long after they have tried other brands.

Stock Up and Save

The Drag X Pro is a device you will keep for years, but the coils and battery are consumables that need thinking about at checkout. A pack of TPP coils or PnP coils grabbed alongside the mod covers the next few months, and a fresh 21700 cell from the Advanced Mods side of the catalogue keeps performance consistent.

Every order from Pirate Vapes ships the same day before 4 pm through age-verified checkout, TPD compliant, over 18s only. Spend over £25 and delivery is free with Free Pirate Post.

Conclusion

The VooPoo Drag X Pro Mod Kit is one of the most versatile single-battery mods available right now. 100W output from the GENE.FAN 3.0 chip, 0.1Ω to 3.0Ω resistance range, full TPP and PnP coil compatibility, genuine 360° airflow with a dedicated MTL option, and the classic zinc alloy and leather Drag build across seven colours.

Priced sensibly, built to last, and flexible enough to cover MTL through to full DTL cloud vaping without needing a second device. Order the Drag X Pro Mod Kit at Pirate Vapes.

FAQs

Is the battery included with the Drag X Pro?

No. The device requires a single 18650 or 21700 external cell, sold separately. Any reputable branded battery from a trusted UK retailer works.

What wattage should I run the Drag X Pro at?

Depends on the coil. The TPP-DM2 0.2Ω runs best at 40–60W, and the TPP-DM3 0.15Ω sits between 80–100W. Lower-power PnP coils drop into the 10–35W range.

Can I use MTL coils with the Drag X Pro?

Yes. Through a compatible PnP pod, the mod fires PnP-R1 0.8Ω and PnP-R2 1.0Ω regular coils for a tight MTL draw. Combine with the dedicated MTL air holes and 10–20mg nic salt for a proper cigarette-style pull.

What e-liquid works with the Drag X Pro?

For the sub-ohm TPP coils at 40–100W, high-VG shortfills at 3mg to 6mg freebase are the right pairing. For MTL PnP coils at 10–18W, 10ml nic salts at 10–20mg on a 50/50 ratio.

Does the Drag X Pro have safety protections?

Yes. Eight built-in safety protections, including short circuit, overheat, low battery, low resistance, and overcurrent cut-off.

Is the Drag X Pro TPD compliant?

Yes. The 2ml TPP X Pod meets UK TPD requirements. Sold to over 18s only through age-verified checkout.