Voopoo ITO-X Replacement Pods

Voopoo ITO-X Replacement Pods

Pods wear out. When the flavour goes flat, or the seals start to weep, a fresh cartridge is the cheapest fix going. The ITO-X is VOOPOO's 2ml refillable pod for the Drag Q, built from Pyrex glass and a stainless steel base rather than moulded plastic.

It ships empty and takes the VOOPOO ITO coil range (sold separately), so you set the draw yourself: tight MTL or looser RDTL. Top-filling, magnetic fit, TPD compliant. One of the sturdier Replacement Pods for the Drag Q crowd.

Why vapers choose this:

• Glass and steel, not plastic, so it resists staining from darker liquids and outlasts the flimsier pods most kits ship with.

• Ships empty so you pick the ITO coil resistance that suits your draw, rather than being stuck with one.

• Top-fill under a sealed cap keeps refills quick and leaks rare.

• Magnetic, push-to-fit design means coil swaps and pod changes take seconds.

• 2ml TPD capacity in line with UK rules, filled with whatever nic salt or 50/50 you favour.

Voopoo ITO-X Replacement Pod Features

Glass and Steel, Not Cheap Plastic

The body pairs a Pyrex glass window with a stainless steel base, a step up from the moulded plastic most replacement pods use. Glass shrugs off staining from darker e-liquids, the steel base takes the knocks, and you can read your liquid level at a glance. Small thing. Noticeable over months of daily use.

Where Does the Coil Go?

Into the base. The pod ships empty, so you push a VOOPOO ITO coil (sold separately) into the bottom with a simple push-to-fit action. No threading, no tools. When a coil tires out, you pull it and press in a fresh one while keeping the same pod. Cheaper per week than binning the lot.

Built to Take the ITO Coil Range

This is the home for the Voopoo ITO Coils. The pod supports resistances across roughly 0.3ohm to 3.0ohm depending on the ITO coil you fit, so it covers a tight MTL draw right through to a looser RDTL one. One pod, several personalities, decided entirely by your coil choice.

Top-Fill, Less Mess

Filling happens up top, under a silicone-sealed cap. Lift it, tilt your bottle in, and top up to just under the line. That seal and the pod's silicone rings hold liquid where it belongs, so pocket leaks are rare. Once you have the knack, a refill takes about ten seconds.

One Draw or Another, Your Call

Draw style comes down to the coil, not a fiddly airflow ring. A higher-ohm ITO coil gives that tight, cigarette-style MTL pull. Drop the resistance, and it opens into a warmer RDTL hit with more vapour. It pairs happily with Nic Salt E-Liquids, 50/50 blends, or high-PG juice.

Voopoo ITO-X Replacement Pod Colours

Two finishes, both sold without a coil so you can pair the ITO resistance you actually want. Stocked at Pirate Vapes in the pair below.

#buttons

• Black
• Silver

How to Set Up the Voopoo ITO-X Replacement Pod

Quick job. Under two minutes once your coil is ready.

1. Pull the old pod off the device. The magnetic base releases with a straight tug.

2. Take a fresh VOOPOO ITO coil and push it firmly into the base of the new pod until it seats.

3. Add two or three drops of e-liquid onto the coil's exposed cotton ports to pre-wet them.

4. Lift the top cap, fill with your e-liquid to just below the max line, then press the cap shut.

5. Stand the filled pod upright and leave it a full six minutes so the wick saturates before the first draw. Skip this and the coil burns dry.

6. Clip the pod back onto the device and take a few gentle primer puffs before vaping properly.

What's in the Voopoo ITO-X Replacement Pod Box

One ITO-X pod in your chosen colour. No coil, and no e-liquid. Both are bought separately, which is the point of an empty refillable: you decide the resistance and the flavour. If you have run out of coils too, add an ITO coil pack to the same order.

Made for the Drag Q and the ITO Coil System

The ITO-X pod is built first and foremost for the VOOPOO Drag Q, one of the brand's popular MTL pod kits. It is also referenced for the wider Doric line that runs ITO coils, so if your device takes ITO coils, this pod is worth checking against it. Dropping a fresh pod into a Refillable Pod Kit like the Drag Q takes seconds thanks to the magnetic base.

What it will not do is take another brand's coils or slot into a non-ITO device. This is an ITO-system pod, so PnP pods, other Voopoo pod formats, and rival systems are out. Match the pod to an ITO-coil device, and you are set.

About Voopoo

VOOPOO built its name on the GENE chipset and the Drag series, then carried that reputation into compact pod systems like the Drag Q. The ITO platform is the pod-and-coil ecosystem underneath it: one coil family, several resistances, shared across a run of small MTL and RDTL devices.

That shared-part thinking is the appeal. Spares stay easy to find, and the rest of the Voopoo Range keeps the same logic, from pocket pods up to full sub-ohm mods.

Stock Up and Save

Pods are wear items. The glass stays fine, but the coil seat and seals soften over months of daily use, so a spare in the drawer saves you a dead-vape evening. Grab the pod and a couple of ITO coils together, and you are covered for a good while.

Every order from Pirate Vapes ships same day when it is placed before 4 pm, wrapped to arrive intact. All stock is TPD compliant; checkout is age-verified, over 18s only. Orders over £40 land with Free Pirate Post.

Conclusion

The ITO-X pod is a simple, sturdier-than-average replacement for the Drag Q and its ITO-coil relatives. Pyrex glass and a stainless steel base give it a longer life than plastic pods, top-filling keeps refills tidy, and the coil you fit decides whether you vape tight MTL or looser RDTL.

Keep one spare and your kit never skips a beat. Stock up on refills and pods, grab anything else from the Vape Accessories, and restock at Pirate Vapes.

FAQs

What device is the ITO-X pod for?

Mainly the VOOPOO Drag Q. It also suits other Voopoo devices that run ITO coils. If your kit takes ITO coils, this pod should fit.

Does the ITO-X pod come with a coil?

No. It ships empty so you choose the resistance. You will need a VOOPOO ITO coil separately.

How much e-liquid does the ITO-X pod hold?

2ml, which is the UK limit, filled from the top. Non-UK versions run larger, but the pod sold here is 2ml.

Is the ITO-X pod MTL or RDTL?

Depends on the coil. Higher ohm for a tight MTL draw, lower ohm for a looser RDTL one.

What e-liquid works best with the ITO-X pod?

Nic salt, 50/50, or high-PG liquid. Steer clear of thick high-VG juice, which struggles to wick through an MTL coil.

How long does the ITO-X pod last?

Weeks, usually. The pod outlives its coils by a wide margin, so most people swap coils far more often than the pod itself.