Voopoo VMATE i2 Small Pod Kit

Voopoo VMATE i2 Small Pod Kit

Compact enough for a coin pocket, but with a 1500mAh battery most small pods can't match. The Voopoo VMATE i2 is a 2ml refillable pod kit running Voopoo's GENE.AI 2.0 chip, with 8W to 30W of adjustable power, USB-C charging, and draw-activated firing so there is no button to press.

It fills from the top, takes VMATE pods on a magnetic click-in, and switches between MTL and RDL draws through its adjustable airflow. An RGB light bar shows the battery at a glance. It is one of the more capable pocket-sized Refillable Pod Kits at Pirate Vapes, holding its own against larger MTL Vape Kits.

Why vapers choose this:

• A 1500mAh battery in a genuinely compact shell means the VMATE i2 lasts most of a day of MTL use while still slipping into a small pocket, closing the usual gap between size and battery life.

• 8W to 30W adjustable power via the GENE.AI chip lets you tune the draw.

• Draw-activated firing keeps it button-free and simple.

• 2ml top-fill pods make refills quick and clean.

• Magnetic pod connection clicks in without threads or fuss.

Voopoo VMATE i2 Features

1500mAh Battery in a Compact Body

The headline is that a 1500mAh cell is packed into a device measuring just 113.7mm tall. Most pods this size settle for far less, leaving you charging by mid-afternoon. The VMATE i2 pushes through a typical day of MTL vaping and tops back up over USB-C. Keep a Charging Cable to hand, and downtime stays minimal.

Smart GENE.AI 2.0 Chip

Voopoo's GENE.AI 2.0 chip reads the pod you fit and sets a sensible output across the 8W to 30W range, so you get a consistent draw without menus to wade through. It is the same chip family that powers Voopoo's Drag mods, brought down into a pocket pod. Simple for beginners, dependable for everyone.

Adjustable Airflow for MTL and RDL

Adjustable airflow lets the VMATE i2 cover both major styles. Wind it closed for a tight, cigarette-like MTL pull, or open it up for a warmer, airier RDL draw. The pod you choose sets the tone, and swapping between Replacement Pods takes seconds thanks to the magnetic fit.

Ideal for Nic Salts and 50/50 E-Liquid

The VMATE i2 suits nic salts and 50/50 juice, giving a smooth throat hit at higher strengths that most ex-smokers are after. A 20mg salt in the 0.7 Ohm pod delivers a satisfying MTL vape. Pair it with a bottle of Nic Salt E-Liquid, and you are set.

An aluminium alloy body and a smooth, durable finish make this a device designed for everyday carry. The standout feature is the 256-colour RGB light bar on the side, which acts like a progress bar. The length of the illuminated light drops (Full, 3/4, Half, 1/4) as your battery drains, so you always know exactly how much charge is left. It is compact, robust, and part of Voopoo's widely stocked pod range, meaning spare pods are always easy to find.

Voopoo VMATE i2 Colours

Seven finishes in the store picker, from understated everyday tones to brighter statement options.

#buttons

• Dawn Blue
• Forest Green
• Matte Black
• Neon
• Rosy
• Ruby Red
• Space Grey

Voopoo VMATE i2 Pods

The VMATE i2 uses Voopoo VMATE pods and ships with the versatile 0.7 Ohm. The wider VMATE pod range lets you tune the draw from tight MTL to a looser RDL.

• 0.7 Ohm (included): the all-round MTL to light RDL option, best with nic salt.

• 0.4 Ohm: a lower resistance for a warmer, airier RDL draw.

Keep spare Voopoo Coils and Pods on hand so flavour never fades mid-week.

How to Set Up the Voopoo VMATE i2

A minute or two from box to first draw.

1. Charge the device fully over USB-C before the first use.

2. Open the top fill port on the pod and add your e-liquid, taking care not to overfill.

3. Close the silicone port securely, then click the pod onto the magnetic connection until it seats.

4. Let the filled pod stand upright for a solid ten to fifteen minutes so the coil's internal cotton wicks fully saturate. Drawing after only a few minutes is the fastest way to permanently burn a new coil.

5. Set your airflow to taste using the side slider, from tight MTL to open RDL.

6. Inhale on the mouthpiece to vape, since the device is draw-activated with no button to press.

What's in the Voopoo VMATE i2 Box

The kit includes:

• the VMATE i2 device with its 1500mAh built-in battery,

• a 0.7 Ohm VMATE top-fill pod,

• a USB-C charging cable,

• and a user manual.

No e-liquid is supplied, so add a bottle of nic salt to your order. No external charger or spare battery is needed, as the cell is built in.

Made for the Voopoo VMATE Pod System

The VMATE i2 runs on Voopoo VMATE pods, so restocking is simple and cross-compatible across the VMATE line. The magnetic connection means no threads to cross or wear out.

It does not take pods from other Voopoo series or other brands, so stick to VMATE pods, and you are covered. Keep a couple spare, and a worn pod is a two-second swap.

About Voopoo

Voopoo made its name with the Drag mod series and the GENE chipset that powers them, becoming one of the most trusted brands in UK vaping for reliable, well-engineered hardware.

The VMATE pod line brings that engineering into compact, pocket-friendly form, and the i2 is among the most practical of the range thanks to its unusually large battery for the size. It is a sensible pick for anyone who wants Voopoo build quality and the smarts of the GENE.AI chip without carrying a full mod.

Stock Up and Save

Pair the VMATE i2 with a few spare pods and a bottle of nic salt, and you have a full refillable setup for a fraction of a disposable-a-day habit over a month.

Pirate Vapes dispatches same day when you order before 4 pm, and multi-buy savings apply across pods and e-liquid. All stock is TPD compliant, with an age-verified checkout and over-18s only.

Conclusion

The Voopoo VMATE i2 is a rare thing: a pocket-sized pod kit with a 1500mAh battery, adjustable 8W to 30W power, and the GENE.AI chip doing the hard work. It suits new vapers who want a simple, button-free start and experienced ones who want MTL and RDL from one compact device, all on Voopoo's widely available VMATE pods.

Seven colours and a low running cost round it off. Browse more Vape Accessories or head back to Pirate Vapes for the full range.

FAQs

Is the VMATE i2 good for beginners?

Yes. It is draw-activated, so there is no button to learn, and the GENE.AI chip sets the power for you. Start with the included 0.7 Ohm pod and a 20mg nic salt.

What pods does the VMATE i2 use?

Voopoo VMATE pods. It ships with a 0.7 Ohm pod, with a 0.4 Ohm also available, and they click in on a magnetic connection.

Is the VMATE i2 MTL or RDL?

Both. The adjustable airflow closed gives a tight MTL draw, while opening it up gives a looser RDL one. The pod resistance sets the character.

How long does the VMATE i2 battery last?

The 1500mAh cell is large for a device this size and lasts most of a day of moderate MTL use, recharging over USB-C. Higher-wattage RDL vaping will use it faster.

What e-liquid should I use with the VMATE i2?

A 50/50 or high-PG nic salt works best, at 10 to 20mg in the 0.7 Ohm pod and a lower strength in the 0.4 Ohm. Avoid thick sub-ohm shortfills.

How do I refill the VMATE i2?

Open the top fill port on the pod, add your e-liquid, and close it before clicking the pod back onto the device. Each pod holds 2ml.