Watermelon Kiwi Al Fakher Crown Bar 30K Puff Hypermax Vape Kit

Watermelon Kiwi Al Fakher Crown Bar 30K Puff Hypermax Vape Kit

Watermelon and kiwi make up the single flavour of the Watermelon Kiwi Al Fakher Crown Bar 30K Puff Hypermax Vape Kit, an 850mAh device with a ceiling of up to 30,000 puffs. The 2ml pod is filled with 6mg/ml nicotine salt, and two 10ml containers are used to keep it topped up.

Single kits are offered alongside packs of five and ten. Its coil is a mesh one inside the pod, and a draw on the mouthpiece fires the kit without any button press. Fresh pods are fitted when the first set is finished, and comparable devices appear in Prefilled Pod Kits.

What to Know About the Watermelon Kiwi Crown Bar 30K Kit

• Single flavour: Watermelon Kiwi, juicy watermelon with a tangy kiwi finish
• A ceiling of up to 30,000 puffs, depending on draw length
• A 2ml prefilled pod fed by two 10ml containers
• 850mAh battery, recharged over USB-C
• Takes Al Fakher 30K Hypermax refill pods only

Features of Watermelon Kiwi Al Fakher Crown Bar 30K Puff Hypermax Vape Kit

Flavour, puff rating, liquid supply, power and coil are covered in turn below. Devices with a similar rating are collected at 30000 Puff Vapes.

Watermelon Kiwi Flavour

Juicy watermelon leads, and a tangy kiwi note follows through the finish. The taste is fruit-led and not icy. No other flavour is offered, and Watermelon Kiwi is what fills the pod and both containers.

Up to 30,000 Puffs

The pod and both containers share a stated maximum of up to 30,000 puffs. Totals in daily use are decided by draw length and frequency, and long draws bring the figure down. The number is treated as a limit and not a target.

Pod and Two 10ml Containers

The 2ml pod stays within the legal ceiling for UK nicotine pods, while the reserve is held by two 10ml containers. Liquid is passed from the containers to the pod as it empties, so no bottle is needed. The salt is 6mg/ml, a long way under the 20mg/ml UK maximum.

850mAh Battery and USB-C Charging

The USB-C port handles charging, and the cell behind it is a built-in 850mAh unit. A display shows the remaining charge. No lead is supplied, so suitable ones can be found at Chargers And Cables, and comparable kits are shown in Rechargeable Vapes.

Mesh Coil and Draw Activation

Heating is done by a mesh coil built into the pod, so nothing is installed or primed. The kit is draw-activated: a pull on the mouthpiece is what starts it. A new coil is supplied with every pod.

Nicotine Strength in the Watermelon Kiwi Hypermax Kit

All of the liquid in the kit is nicotine salt at 6mg/ml. Pack size leaves the strength unchanged, and the device offers no way to adjust it.

Because nicotine is addictive, sales are restricted to adults.

How to Set Up the Watermelon Kiwi Al Fakher Kit

Nothing needs adding except a charging lead, as the liquid is already supplied.

Step 1: Open the box, lay out the device, pod and containers, and take off any packaging film.

Step 2: Charge the battery over USB-C until it reads full.

Step 3: Fit the prefilled pod, then attach the two containers, following the manual.

Step 4: Hold off on the first draw for a short time.

Step 5: Begin with a few light draws, then vape as normal.

What's in the Watermelon Kiwi Hypermax Kit Box

A single kit holds one complete set, and larger packs hold several.

• 1 x Al Fakher Crown Bar 30K Hypermax device
• 1 x 2ml prefilled pod, Watermelon Kiwi
• 2 x 10ml prefilled refill containers
• 1 x user manual

No USB-C lead is included, and extra pods are sold individually.

Pods Compatible With the Watermelon Kiwi Crown Bar Kit

Pods built for the Al Fakher 30K Hypermax are the ones this kit accepts, and Watermelon Kiwi refills exist for it. Pirate Vapes lists pods for several devices at Replacement Pods.

Pods for other Crown Bar models are not interchangeable, so the 30K Hypermax name should be matched when refills are ordered.

About Al Fakher and the Crown Bar Range

Several Crown Bar sizes are stocked, from the 600 and Mini 3000 up through the Pro Max 12K to this 30K kit. Each size is paired with its own pods.

Within the 30K Hypermax, the body stays the same and the flavour is what changes. A Watermelon Kiwi kit is therefore a choice of liquid, and the Al Fakher Hypermax vape pods bought later should carry the same 30K label. Related kits are grouped under Big Puff Pod Kits.

Stock Up on the Watermelon Kiwi Hypermax Kit

A second flavour from the range is an easy addition, as are spare Watermelon Kiwi pods and a charging lead, since none comes with the kit. Multi-buy offers can be browsed at Multi-Buy Vapes.

Before 3:30pm on a weekday, an order from Pirate Vapes is dispatched the same day via Tracked 24; at weekends, dispatch happens the next working day. Age checks apply, and buyers must be over 18.

Conclusion

Adults who like fruit-forward flavours will find a straightforward fit in the Watermelon Kiwi Hypermax kit: a rechargeable body, a pod that is not filled by hand and three pack sizes.

It works with 30K Hypermax pods and any USB-C lead. Other devices are in Vape Kits, and the full range is at Pirate Vapes.

FAQs

How many puffs is the Watermelon Kiwi 30k kit rated for?

The stated maximum is up to 30,000 puffs across the pod and containers, and long draws lower the real count.

What does the Watermelon Kiwi vape taste like?

Juicy watermelon comes first, with a tangy kiwi finish. The flavour is identical in the single kit, the five-pack and the ten-pack.

What strength is the Watermelon Kiwi Crown Bar kit?

The liquid is nic salt at 6mg/ml, below the 20mg/ml UK limit. Buyers must be 18 or over.

Which pods fit the Watermelon Kiwi Hypermax 30k kit?

Pods made for the Al Fakher 30K Hypermax fit it. Pods for other Crown Bar models do not.

Can the Watermelon Kiwi Crown Bar kit be recharged?

The body stays in use while pods are swapped, and its 850mAh battery takes a charge through USB-C. No cable is supplied.

Is a bottle needed for the Watermelon Kiwi Al Fakher Hypermax vape?

A bottle is not needed. The pod arrives filled, the containers top it up during use, and a matching pod is fitted when the first set is empty.